HMIOMODULE-SNMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
18

hmIOModConfigDigInputTable

table
.1.3.6.1.4.1.248.14.1.13.1.2 · 1 row entry · 4 columns
Open in standard view 
IO module config table for inputs
hmIOModConfigDigInputEntry entry .1.3.6.1.4.1.248.14.1.13.1.2.1
IO module config entry for inputs
Indexes
hmIOModConfigDigInputModID hmIOModConfigDigInputID
Column Syntax OID
hmIOModConfigDigInputModID
The module ID of an input.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.248.14.1.13.1.2.1.1
hmIOModConfigDigInputID
The ID of an input.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.14.1.13.1.2.1.2
hmIOModConfigDigInputLogEvent
Trigger an event log when input status changes.
If the value is disable (2), no event log entry will be written.
If the value is enable (1), an event log entry will be written when
the input state changes.
The input sta…
HmEnabledStatusr/w
Textual Convention: HmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.14.1.13.1.2.1.3
hmIOModConfigDigInputSnmpTrap
Trigger an SNMP trap log when input status changes.
If the value is disable (2), no SNMP trap will be sent.
If the value is enable (1), a SNMP trap will be sent when
the input state changes.
The SNMP trap will be sent t…
HmEnabledStatusr/w
Textual Convention: HmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.14.1.13.1.2.1.4

hmIOModConfigDigOutputTable

table
.1.3.6.1.4.1.248.14.1.13.1.3 · 1 row entry · 8 columns
Open in standard view 
IO module config table for outputs
hmIOModConfigDigOutputEntry entry .1.3.6.1.4.1.248.14.1.13.1.3.1
IO module config entry for outputs
Indexes
hmIOModConfigDigOutputModID hmIOModConfigDigOutputID
Column Syntax OID
hmIOModConfigDigOutputModID
The module ID of an output.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.248.14.1.13.1.3.1.1
hmIOModConfigDigOutputID
The ID of an output.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.14.1.13.1.3.1.2
hmIOModConfigDigOutputLogEvent
Trigger an event log when output status changes.
If the value is disable (2), no event log entry will be written.
If the value is enable (1), an event log entry will be written when
the output state changes.
The output …
HmEnabledStatusr/w
Textual Convention: HmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.14.1.13.1.3.1.3
hmIOModConfigDigOutputSnmpTrap
Trigger an SNMP trap log when output status changes.
If the value is disable (2), no SNMP trap will be sent.
If the value is enable (1), a SNMP trap will be sent when
the output state changes.
The SNMP trap will be sent…
HmEnabledStatusr/w
Textual Convention: HmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.14.1.13.1.3.1.4
hmIOModConfigDigOutputSourceIP
The IP address of an input mirrored to the output.
Use 0.0.0.0 if the output should not be set.
In this case hmIOModOutputValue is invalid (3).
Use 127.0.0.1 if an local input should be used.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.14.1.13.1.3.1.5
hmIOModConfigDigOutputSourceModID
The module ID of an input mirrored to the output.
Ignored when hmIOModConfigDigOutputSourceIP is 0.0.0.0.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.248.14.1.13.1.3.1.6
hmIOModConfigDigOutputSourceID
The ID of an input mirrored to the output.
Ignored when hmIOModConfigDigOutputSourceIP is 0.0.0.0.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.14.1.13.1.3.1.7
hmIOModConfigDigOutputSourcePort
The SNMP port number being used by the input mirrored to the output.
This port would be the destination for the SNMP requests for
polling the state of the input.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.14.1.13.1.3.1.8

hmIOModValueDigInputTable

table
.1.3.6.1.4.1.248.14.1.13.2.1 · 1 row entry · 3 columns
Open in standard view 
IO module value table for inputs
hmIOModValueDigInputEntry entry .1.3.6.1.4.1.248.14.1.13.2.1.1
IO module value entry for inputs
Indexes
hmIOModValueDigInputModID hmIOModValueDigInputID
Column Syntax OID
hmIOModValueDigInputModID
The module ID of an input.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.248.14.1.13.2.1.1.1
hmIOModValueDigInputID
The ID of an input.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.14.1.13.2.1.1.2
hmIOModValueDigInputValue
Status of the input.
If the value is not-available(0), then the IO module is not plugged in,
if the value is high(1), the input has high (+24V) value,
if the value is low(2), the input has low (0V) value.
Enumeration
Enumerated Values:
0not-available
1high
2low
 .1.3.6.1.4.1.248.14.1.13.2.1.1.3

hmIOModValueDigOutputTable

table
.1.3.6.1.4.1.248.14.1.13.2.2 · 1 row entry · 3 columns
Open in standard view 
IO module value table for outputs
hmIOModValueDigOutputEntry entry .1.3.6.1.4.1.248.14.1.13.2.2.1
IO module value entry for outputs
Indexes
hmIOModValueDigOutputModID hmIOModValueDigOutputID
Column Syntax OID
hmIOModValueDigOutputModID
The module ID of an Output.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.248.14.1.13.2.2.1.1
hmIOModValueDigOutputID
The ID of an Output.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.14.1.13.2.2.1.2
hmIOModValueDigOutputValue
Status of the output.
If the value is not-available(0), then the IO module is not plugged in,
if the value is high(1), the output has high (+24V) value,
if the value is low(2), the output has low (0V) value.
If the valu…
Enumeration
Enumerated Values:
0not-available
1high
2low
3invalid
4not-configured
 .1.3.6.1.4.1.248.14.1.13.2.2.1.3