HM2-LOGGING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
40

hm2LogSyslogServerTable

table
.1.3.6.1.4.1.248.11.23.1.5.10 · 1 row entry · 8 columns
Open in standard view 
A list of syslog servers
hm2LogSyslogServerEntry entry .1.3.6.1.4.1.248.11.23.1.5.10.1
An entry of syslog servers
Indexes
hm2LogSyslogServerIndex DNOS-DOT1X-ADVANCED-FEATURES-MIBagentDot1xAuthHistoryResultIfaceIndex DNOS-DOT1X-ADVANCED-FEATURES-MIBagentDot1xAuthHistoryResultIndex
Column Syntax OID
hm2LogSyslogServerIndex
An index that uniquely identifies the entry
in the table and so the syslog server.
Integer32
Constraints:
range: 1-65535
range: 1-8
 .1.3.6.1.4.1.248.11.23.1.5.10.1.1
hm2LogSyslogServerIPAddrType
Address type for server IP address.
Currently, only ipv4(1), ipv6(2) and dns(16) are supported.
INET-ADDRESS-MIBInetAddressTyper/w
Constraints:
range: 1-65535
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.23.1.5.10.1.2
hm2LogSyslogServerIPAddr
IP address of syslog server for logging.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.23.1.5.10.1.3
hm2LogSyslogServerUdpPort
TCP or UDP port used for syslog server transmission. If this value is
zero then the default port 514 is used.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.11.23.1.5.10.1.4
hm2LogSyslogServerLevelUpto
Up to log level to be sent to this syslog server.
HmAgentLogSeverityr/w
Textual Convention: HmAgentLogSeverity Enumeration
Type Values:
0emergency
1alert
2critical
3error
4warning
5notice
6informational
7debug
 .1.3.6.1.4.1.248.11.23.1.5.10.1.5
hm2LogSyslogServerLogType
Defines the type of log messages to be sent to the syslog server.
systemlog (1): Define the system event log entries as stored also in
the system event log.
audittrail (2): Define the audit trail log entries.
Enumerationr/w
Enumerated Values:
1systemlog
2audittrail
 .1.3.6.1.4.1.248.11.23.1.5.10.1.6
hm2LogSyslogServerRowStatus
Syslog server entry status.
active(1) - This syslog server is active.
notInService(2) - Row has been suspended.
notReady(3) - Row has incomplete values.
createAndGo(4) - Accept row values and activate.
createAndWait(5…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.11.23.1.5.10.1.7
hm2LogSyslogServerTransportType
The transport type used to deliver the log messages to the syslog server.
When set to udp(1) the syslog messages are sent over UDP on the configured port.
When set to tls(2) the syslog messages are sent over TLS
on co…
Enumerationr/w
Enumerated Values:
1udp
2tls
 .1.3.6.1.4.1.248.11.23.1.5.10.1.8

hm2LogPersistentFileTable

table
.1.3.6.1.4.1.248.11.23.1.6.5 · 1 row entry · 3 columns
Open in standard view 
A list of persistent log files
hm2LogPersistentFileEntry entry .1.3.6.1.4.1.248.11.23.1.6.5.1
An entry of persistent log files
Indexes
hm2LogPersistentFileIndex
Column Syntax OID
hm2LogPersistentFileIndex
The index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.6.5.1.1
hm2LogPersistentFileName
The name of the log file.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.23.1.6.5.1.2
hm2LogPersistentFileSize
The size of the file in bytes.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.6.5.1.3

hm2LogCounterFlashTable

table
.1.3.6.1.4.1.248.11.23.1.7.10 · 1 row entry · 4 columns
Open in standard view 
A list of log counter entries
hm2LogCounterFlashEntry entry .1.3.6.1.4.1.248.11.23.1.7.10.1
An entry of log counter entries
Indexes
hm2LogCounterFlashBlock
Column Syntax OID
hm2LogCounterFlashBlock
The name of the flash region.
Enumeration
Enumerated Values:
1bootBlock
2fileSystem
3imageStorage
4parameters
5formatFs
6userFormatFs
7dhcpBindings
8persistentLog
 .1.3.6.1.4.1.248.11.23.1.7.10.1.1
hm2LogCounterFlashDescription
The textual description of the group.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.23.1.7.10.1.2
hm2LogCounterFlashCount
The number of flash sectors in this group.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.7.10.1.3
hm2LogCounterFlashValue
The number of sector erase operations performed for this group.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.7.10.1.4

hm2LogTempHistTable

table
.1.3.6.1.4.1.248.11.23.1.8.10 · 1 row entry · 4 columns
Open in standard view 
A list of temperature ranges and how many hours the
device has been in these ranges (histogram).
hm2LogTempHistEntry entry .1.3.6.1.4.1.248.11.23.1.8.10.1
An entry of temperature ranges and how many hours the
device has been in these ranges (histogram).
Indexes
hm2LogTempHistIndex
Column Syntax OID
hm2LogTempHistIndex
Index
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.8.10.1.1
hm2LogTempHistRangeMin
The lower bound of the range in 10th of centigrade (Celsius).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.8.10.1.2
hm2LogTempHistRangeMax
The upper bound of the range in 10th of centigrade (Celsius).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.8.10.1.3
hm2LogTempHistTime
The time spent in this range in minutes.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.23.1.8.10.1.4

hm2LogEmailToAddressTable

table
.1.3.6.1.4.1.248.11.23.1.10.15 · 1 row entry · 4 columns
Open in standard view 
The table listing the destination email address and the message type.
hm2LogEmailToAddressEntry entry .1.3.6.1.4.1.248.11.23.1.10.15.1
The table entry listing the destination email address and the message type.
Indexes
hm2LogEmailToAddrMessageIndex
Column Syntax OID
hm2LogEmailToAddrMessageIndex
An integer used only for indexing purposes.
Generally monotonically increasing from 1 as new
addresses are configured. Re-use of values for this
index should be avoided.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.248.11.23.1.10.15.1.1
hm2LogEmailToAddrMessageType
Log message type.
Enumerationr/w
Enumerated Values:
1urgent
2non-urgent
 .1.3.6.1.4.1.248.11.23.1.10.15.1.2
hm2LogEmailToAddrAddress
Email address to which the email-alert to be sent.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.11.23.1.10.15.1.3
hm2LogEmailToAddrEntryStatus
Create, change or delete the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.11.23.1.10.15.1.4

hm2LogEmailSubjectTable

table
.1.3.6.1.4.1.248.11.23.1.10.16 · 1 row entry · 3 columns
Open in standard view 
List of subject of the email for particular message type.
hm2LogEmailSubjectEntry entry .1.3.6.1.4.1.248.11.23.1.10.16.1
This entry shows what kind of subject to be used for the given message

type.
Indexes
hm2LogEmailSubjectMessageType
Column Syntax OID
hm2LogEmailSubjectMessageType
Log message Type
Enumeration
Enumerated Values:
1urgent
2non-urgent
 .1.3.6.1.4.1.248.11.23.1.10.16.1.1
hm2LogEmailSubject
Email subject for given message type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.11.23.1.10.16.1.2
hm2LogEmailSubjectEntryStatus
Create, change or delete the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.11.23.1.10.16.1.3

hm2LogEmailMailServerTable

table
.1.3.6.1.4.1.248.11.23.1.10.17 · 1 row entry · 10 columns
Open in standard view 
The (conceptual) table listing the mail servers.
hm2LogEmailMailServerEntry entry .1.3.6.1.4.1.248.11.23.1.10.17.1
This entry shows the conmfiguration for the mail server(s).
Indexes
hm2LogEmailSmtpAddrIndex
Column Syntax OID
hm2LogEmailSmtpAddrIndex
An integer used only for indexing purposes.
Re-use of values for this index is allowed.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.248.11.23.1.10.17.1.1
hm2LogEmailSmtpAddrDescr
The description of the server configured.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.11.23.1.10.17.1.2
hm2LogEmailSmtpAddrType
Email SMTP address type.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.23.1.10.17.1.3
hm2LogEmailSmtpAddr
SMTP server address.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.23.1.10.17.1.4
hm2LogEmailSmtpPort
SMTP port number. When this object is set to 0, it resets to factory default port number 25.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.11.23.1.10.17.1.5
hm2LogEmailSmtpSecurity
This is the authentication mechanism that should be used.
Enumerationr/w
Enumerated Values:
1none
2tlsv1
 .1.3.6.1.4.1.248.11.23.1.10.17.1.6
hm2LogEmailSmtpLoginID
This user id is used while the switch/router is being authenticated by the SMTP server,
if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.11.23.1.10.17.1.7
hm2LogEmailSmtpPassword
This password is used while the switch/router is being authenticated by the SMTP server,
if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.11.23.1.10.17.1.8
hm2LogEmailSmtpEntryStatus
Create, change or delete the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.11.23.1.10.17.1.9
hm2LogEmailSmtpTimeout
Time out duration (in seconds) before packets are retransmitted.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.248.11.23.1.10.17.1.10

hm2LogHumHistTable

table
.1.3.6.1.4.1.248.11.23.1.11.10 · 1 row entry · 4 columns
Open in standard view 
A list of humidity ranges and how many hours the
device has been in these ranges (histogram).
hm2LogHumHistEntry entry .1.3.6.1.4.1.248.11.23.1.11.10.1
An entry of humidity ranges and how many hours the
device has been in these ranges (histogram).
Indexes
hm2LogHumHistIndex
Column Syntax OID
hm2LogHumHistIndex
Index
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.23.1.11.10.1.1
hm2LogHumHistRangeMin
The lower bound of the range as a percentage.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.11.23.1.11.10.1.2
hm2LogHumHistRangeMax
The upper bound of the range as a percentage.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.11.23.1.11.10.1.3
hm2LogHumHistTime
The time spent in this range in minutes.
minutesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.23.1.11.10.1.4