HH3C-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
10
Rows
10
Columns
67
.1.3.6.1.4.1.25506.2.53.1.1.1 · 1 row entry · 9 columns
The (conceptual) table containing information on configured tunnels.
hh3cTunnelIfEntry entry .1.3.6.1.4.1.25506.2.53.1.1.1.1
An entry (conceptual row) containing the information on a
particular configured tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
Hh3cTunnelTyper/w
Textual Convention: Hh3cTunnelType Enumeration
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
35tunnelModeReserve
36tunnelModeIPv4Gre
37tunnelModeIPv6Gre
38tunnelModeIPv4IPv4
39tunnelModeIPv4IPv6Config
40tunnelModeIPv4IPv6Auto
41tunnelModeIPv4IPv66to4
42tunnelModeIPv4IPv6Isatap
43tunnelModeIPv6IPv4
44tunnelModeIPv6IPv6
45tunnelModeIPv4UdpDVPN
46tunnelModeIPv4GreDVPN
47tunnelModeIPv6UdpDVPN
48tunnelModeIPv6GreDVPN
49tunnelModeCrLsp
50tunnelModeMax
51tunnelModeIPv4UdpVxlan
52tunnelModeIPv6UdpVxlan
53tunnelModeIPv4NVGRE
54tunnelModeIPv6NVGRE
.1.3.6.1.4.1.25506.2.53.1.1.1.1.3
hh3cTunnelIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.1.1.4
hh3cTunnelIfSecurity
The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
informati…
Enumeration .1.3.6.1.4.1.25506.2.53.1.1.1.1.5
hh3cTunnelIfTOS
The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicates that the bits are copied from the
payload's header. …
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.1.1.6
hh3cTunnelIfFlowLabel
The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
hh3cTunnelIfAddressType indicates the tunnel is not over
IPv6. A value of -1 indicates that a traffic
conditioner is invok…
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
Textual Convention: IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny Integer32
Type Constraints:
range: -1..1048575
.1.3.6.1.4.1.25506.2.53.1.1.1.1.7
hh3cTunnelIfAddressType
The type of address in the corresponding
hh3cTunnelIfLocalInetAddress and hh3cTunnelIfRemoteInetAddress
objects.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.1.1.8
hh3cTunnelIfLocalInetAddress
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by hh3c…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.1.1.9
hh3cTunnelIfRemoteInetAddress
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the val…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.1.1.10
hh3cTunnelIfEncapsLimit
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.1.1.11
.1.3.6.1.4.1.25506.2.53.1.1.3 · 1 row entry · 5 columns
The (conceptual) table containing information on
configured tunnels.  This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value.  It can also be used for row creation.  Note
that every row in the hh3cTunnelIfTable with a fixed
destination address should have a corresponding row in
the hh3cTunnelInetConfigTable, regardless of whether it
was created via SNMP.
hh3cTunnelInetConfigEntry entry .1.3.6.1.4.1.25506.2.53.1.1.3.1
An entry (conceptual row) containing the information
on a particular configured tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelInetConfigSlot
Slot number. hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot
and hh3cTunnelInetConfigTunnNum describe a tunnel interface.
For Example, interface tunnel 0/0/25 would be configured as:
hh3cTunnelInetConfigSlot …
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.3.1.1
hh3cTunnelInetConfigSubSlot
Sub slot number. As described in hh3cTunnelInetConfigSlot's description.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.3.1.2
hh3cTunnelInetConfigTunnNum
Tunnel number. As described in hh3cTunnelInetConfigSlot's description.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.3.1.3
hh3cTunnelInetConfigIfIndex
If the value of hh3cTunnelInetConfigStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that the…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.3.1.6
hh3cTunnelInetConfigStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.25506.2.53.1.1.3.1.7
.1.3.6.1.4.1.25506.2.53.1.1.4 · 1 row entry · 8 columns
The (conceptual) table containing information on configured EVI-Tunnel.
hh3cTunnelEviEntry entry .1.3.6.1.4.1.25506.2.53.1.1.4.1
An entry (conceptual row) containing the information on a
particular configured EVI-Tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelEviTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.4.1.1
hh3cTunnelEviIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.4.1.2
hh3cTunnelEviStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.25506.2.53.1.1.4.1.3
hh3cTunnelEviAddressType
The type of address in the corresponding
hh3cTunnelEviLocalAddr objects.
Can not be modified after creation.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.4.1.4
hh3cTunnelEviLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). The type of this object is given by
hh3cTunnelEviAddressType.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.4.1.5
hh3cTunnelEviNetworkID
The method used to assign a network ID to an EVI-Tunnel interface.
Assign the same network ID to the EVI-Tunnel interfaces of
all edge devices in an EVI network. A value of 0 indicates that
no network ID is assigned to…
Integer32r/w .1.3.6.1.4.1.25506.2.53.1.1.4.1.6
hh3cTunnelEviKeepaliveInterval
The method used to assign the keepalive interval.
Integer32r/w .1.3.6.1.4.1.25506.2.53.1.1.4.1.7
hh3cTunnelEviKeepaliveTimes
The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
Integer32r/w .1.3.6.1.4.1.25506.2.53.1.1.4.1.8
.1.3.6.1.4.1.25506.2.53.1.1.5 · 1 row entry · 4 columns
The (conceptual) table containing information on configured EVI-Link.
hh3cTunnelEviLinkEntry entry .1.3.6.1.4.1.25506.2.53.1.1.5.1
An entry (conceptual row) containing the information on a
particular configured EVI-Link.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelEviLinkNum
EVI-Link number.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.5.1.1
hh3cTunnelEviLinkIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.5.1.2
hh3cTunnelEviLinkAddressType
The type of address in the corresponding
hh3cTunnelEviLinkRemoteAddr objects.
Can not be modified after creation.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.5.1.3
hh3cTunnelEviLinkRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.5.1.4
.1.3.6.1.4.1.25506.2.53.1.1.6 · 1 row entry · 10 columns
The (conceptual) table containing information on configured Gre-Tunnel.
hh3cTunnelGreEntry entry .1.3.6.1.4.1.25506.2.53.1.1.6.1
An entry (conceptual row) containing the information on a
particular configured Gre-Tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelGreTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.6.1.1
hh3cTunnelGreTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.6.1.2
hh3cTunnelGreAddressType
The type of address in the corresponding
hh3cTunnelGreLocalAddr and hh3cTunnelGreRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.6.1.3
hh3cTunnelGreLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.6.1.4
hh3cTunnelGreRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.6.1.5
hh3cTunnelGreKeepaliveEnabled
This MIB object specifies whether or not keepalive is used.
A value of true indicates that keepalive SHOULD be used.
When keepalive is not be used, the value of
hh3cTunnelGreKeepaliveInterval and hh3cTunnelGreKeepaliveT…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.25506.2.53.1.1.6.1.6
hh3cTunnelGreKeepaliveInterval
The method used to assign the keepalive interval.
The value is zero when keepalive is not used.
The valid value is from 1 to 32767, when keepalive is used.
Integer32r/w .1.3.6.1.4.1.25506.2.53.1.1.6.1.7
hh3cTunnelGreKeepaliveTimes
The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
The value is zero when keepalive is not used.
The valid value is from 1 to 255, when keepalive is used.
Integer32r/w .1.3.6.1.4.1.25506.2.53.1.1.6.1.8
hh3cTunnelGreSlbgGroupNum
The method used to assign the service-loopback-group.
Unsigned32r/w .1.3.6.1.4.1.25506.2.53.1.1.6.1.9
hh3cTunnelGreTunnStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.25506.2.53.1.1.6.1.10
.1.3.6.1.4.1.25506.2.53.1.1.7 · 1 row entry · 6 columns
The (conceptual) table containing information on configured Vxlan-Tunnel.
hh3cTunnelVxlanIfEntry entry .1.3.6.1.4.1.25506.2.53.1.1.7.1
An entry (conceptual row) containing the information on a
particular configured Vxlan-Tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelVxlanIfTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.7.1.1
hh3cTunnelVxlanTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.7.1.2
hh3cTunnelVxlanIfAddressType
The type of address in the corresponding
hh3cTunnelVxlanIfLocalAddr and hh3cTunnelVxlanIfRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.7.1.3
hh3cTunnelVxlanIfLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.7.1.4
hh3cTunnelVxlanIfRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.7.1.5
hh3cTunnelVxlanIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.25506.2.53.1.1.7.1.6
.1.3.6.1.4.1.25506.2.53.1.1.10 · 1 row entry · 2 columns
Total number of a particular method tunnel.
hh3cTunnelTotalNumEntry entry .1.3.6.1.4.1.25506.2.53.1.1.10.1
Total number of a particular method tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelEncapsMethod
The encapsulation method used by the tunnel.
Hh3cTunnelType
Textual Convention: Hh3cTunnelType Enumeration
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
35tunnelModeReserve
36tunnelModeIPv4Gre
37tunnelModeIPv6Gre
38tunnelModeIPv4IPv4
39tunnelModeIPv4IPv6Config
40tunnelModeIPv4IPv6Auto
41tunnelModeIPv4IPv66to4
42tunnelModeIPv4IPv6Isatap
43tunnelModeIPv6IPv4
44tunnelModeIPv6IPv6
45tunnelModeIPv4UdpDVPN
46tunnelModeIPv4GreDVPN
47tunnelModeIPv6UdpDVPN
48tunnelModeIPv6GreDVPN
49tunnelModeCrLsp
50tunnelModeMax
51tunnelModeIPv4UdpVxlan
52tunnelModeIPv6UdpVxlan
53tunnelModeIPv4NVGRE
54tunnelModeIPv6NVGRE
.1.3.6.1.4.1.25506.2.53.1.1.10.1.1
hh3cTunnelTotalNum
Total number of a particular method tunnel.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.53.1.1.10.1.2
.1.3.6.1.4.1.25506.2.53.1.1.11 · 1 row entry · 6 columns
The (conceptual) table containing information on configured Nvgre-Tunnel.
hh3cTunnelNvgreIfEntry entry .1.3.6.1.4.1.25506.2.53.1.1.11.1
An entry (conceptual row) containing the information on a
particular configured Nvgre-Tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelNvgreIfTunnNum
Tunnel number. An identifier used to distinguish
between multiple tunnels.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.11.1.1
hh3cTunnelNvgreTunnIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.11.1.2
hh3cTunnelNvgreIfAddressType
The type of address in the corresponding
hh3cTunnelNvgreIfLocalAddr and hh3cTunnelNvgreIfRemoteAddr objects.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.11.1.3
hh3cTunnelNvgreIfLocalAddr
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.11.1.4
hh3cTunnelNvgreIfRemoteAddr
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.11.1.5
hh3cTunnelNvgreIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obj…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.25506.2.53.1.1.11.1.6
.1.3.6.1.4.1.25506.2.53.1.1.12 · 1 row entry · 4 columns
The (conceptual) table containing information on tunnels.
hh3cTunnelDestinationEntry entry .1.3.6.1.4.1.25506.2.53.1.1.12.1
An entry (conceptual row) containing the information on a
particular tunnel.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelDestinationDstAddr
Destination address of a tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.12.1.1
hh3cTunnelDestinationDstType
Type of the destination address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.12.1.2
hh3cTunnelDestinationTunNum
Tunnel number, an identifier used to distinguish
between multiple tunnels.
Integer32 .1.3.6.1.4.1.25506.2.53.1.1.12.1.3
hh3cTunnelDestinationTunIfindex
A unique value greater than zero, for each interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.12.1.4
.1.3.6.1.4.1.25506.2.53.1.1.13 · 1 row entry · 13 columns
The table contains GRE P2MP tunnel mapping statistics.
hh3cTunnelGrep2mpStatsEntry entry .1.3.6.1.4.1.25506.2.53.1.1.13.1
GRE P2MP tunnel mapping statistics entry.
Indexes
No indexes recorded
Column Syntax OID
hh3cTunnelGrep2mpStatsTunnelNo
Tunnel interfacenumber.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.13.1.1
hh3cTunnelGrep2mpStatsVrf
VPN instance index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.13.1.2
hh3cTunnelGrep2mpStatsVPCID
VPC ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.53.1.1.13.1.3
hh3cTunnelGrep2mpStatsBraAddr
Branch network IP address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.13.1.4
hh3cTunnelGrep2mpStatsBraMask
Branch network mask.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.53.1.1.13.1.5
hh3cTunnelGrep2mpStatsAddrType
Type of address in the corresponding
hh3cTunnelGrep2mpStatsBraAddr and hh3cTunnelGrep2mpStatsBraMask
objects.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.53.1.1.13.1.6
hh3cTunnelGrep2mpStatsDestAddr
Tunnel destination address.
INET-ADDRESS-MIBInetAddressIPv4
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.25506.2.53.1.1.13.1.7
hh3cTunnelGrep2mpStatsInPkts
Total number of IP datagrams received.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.8
hh3cTunnelGrep2mpStatsInOctets
Total number of octets received in IP datagrams.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.9
hh3cTunnelGrep2mpStatsInDis
The number of input IP datagrams for which no problems were
encountered to prevent their continued processing, but
were discarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.10
hh3cTunnelGrep2mpStatsOutPkts
Total number IP datagrams sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.11
hh3cTunnelGrep2mpStatsOutOctets
Total number of octets in IP datagrams sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.12
hh3cTunnelGrep2mpStatsOutDis
The number of output IP datagrams which no problem was
encountered to prevent their transmission to their
destination, but were discarded .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.53.1.1.13.1.13