HH3C-ENTITY-EXT-MIB
The private MIB file includes the general extent
information of the device.
hh3cEntityExtend
1.3.6.1.4.1.25506.2.6
Imported Objects
| ENTITY-MIB | entPhysicalDescr entPhysicalIndex entPhysicalName |
| HCNUM-TC | CounterBasedGauge64 |
| HH3C-OID-MIB | hh3cCommon |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION |
Type Definitions (4)
| Hh3cAdminState | Enumeration |
notSupported(1)locked(2)shuttingDown(3)unlocked(4) |
| Hh3cAlarmStatus | Bits |
notSupported(0)underRepair(1)critical(2)major(3)minor(4)alarmOutstanding(5)warning(6)indeterminate(7) |
| Hh3cOperState | Enumeration |
notSupported(1)disabled(2)enabled(3)dangerous(4) |
| Hh3cStandbyStatus | Enumeration |
notSupported(1)hotStandby(2)coldStandby(3)providingService(4) |
Objects (90)
|
|
.1.3.6.1.4.1.25506.2.6 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.1 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.1.1 |
|
|
|
hh3cEntityExtPhysicalIndex | .1.3.6.1.4.1.25506.2.6.1.1.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.1 |
|
|
bytesUnsigned32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.10 |
|
|
secondsInteger32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.11 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.12 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.13 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.14 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.15 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.16 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.17 |
|
|
SNMPv2-TCMacAddress | .1.3.6.1.4.1.25506.2.6.1.1.1.1.18 |
|
|
Enumeration | .1.3.6.1.4.1.25506.2.6.1.1.1.1.19 |
|
|
Hh3cAdminState | .1.3.6.1.4.1.25506.2.6.1.1.1.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.20 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.21 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.22 |
|
|
Unsigned32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.23 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.24 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.1.1.1.1.25 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.26 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.27 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.1.1.1.1.28 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.29 |
|
|
Hh3cOperState | .1.3.6.1.4.1.25506.2.6.1.1.1.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.30 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.31 |
|
|
bytesHCNUM-TCCounterBasedGauge64 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.32 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.33 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.34 |
|
|
Hh3cStandbyStatus | .1.3.6.1.4.1.25506.2.6.1.1.1.1.4 |
|
|
Hh3cAlarmStatus | .1.3.6.1.4.1.25506.2.6.1.1.1.1.5 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.6 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.7 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.8 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.1.1.1.9 |
|
|
.1.3.6.1.4.1.25506.2.6.1.2 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.2.1 |
|
|
|
hh3cEntityExtManuPhysicalIndex | .1.3.6.1.4.1.25506.2.6.1.2.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.2.1.1.1 |
|
|
SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.25506.2.6.1.2.1.1.2 |
|
|
SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.25506.2.6.1.2.1.1.3 |
|
|
SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.25506.2.6.1.2.1.1.4 |
|
|
Unsigned32 | .1.3.6.1.4.1.25506.2.6.1.2.1.1.5 |
|
|
.1.3.6.1.4.1.25506.2.6.1.3 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.3.1 |
|
|
|
hh3cEntityExtPowerPhysicalIndex | .1.3.6.1.4.1.25506.2.6.1.3.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.3.1.1.1 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.2.6.1.3.1.1.2 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.25506.2.6.1.3.1.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.3.1.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.3.1.1.5 |
|
|
.1.3.6.1.4.1.25506.2.6.1.4 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.4.1 |
|
|
|
hh3cProcessID | .1.3.6.1.4.1.25506.2.6.1.4.1.1 |
|
|
Unsigned32 | .1.3.6.1.4.1.25506.2.6.1.4.1.1.1 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.1.4.1.1.2 |
|
|
Unsigned32 | .1.3.6.1.4.1.25506.2.6.1.4.1.1.3 |
|
|
.1.3.6.1.4.1.25506.2.6.1.5 |
|
|
|
.1.3.6.1.4.1.25506.2.6.1.5.1 |
|
|
|
hh3cEntityExtPhysicalIndex | .1.3.6.1.4.1.25506.2.6.1.5.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.25506.2.6.1.5.1.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.5 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.6 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.1.5.1.1.7 |
|
|
.1.3.6.1.4.1.25506.2.6.2 |
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0 |
|
|
|
.1.3.6.1.4.1.25506.2.6.2.1 |
|
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.2.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.25506.2.6.2.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.2.1.3 |
|
|
RFC1155-SMITimeTicks | .1.3.6.1.4.1.25506.2.6.2.1.4 |
|
|
.1.3.6.1.4.1.25506.2.6.3 |
|
|
|
.1.3.6.1.4.1.25506.2.6.3.1 |
|
|
|
.1.3.6.1.4.1.25506.2.6.3.2 |
|
|
|
.1.3.6.1.4.1.25506.2.6.4 |
|
|
|
.1.3.6.1.4.1.25506.2.6.4.0 |
|
|
|
.1.3.6.1.4.1.25506.2.6.4.1 |
|
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.4.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.25506.2.6.4.1.2 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.4.1.3 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.4.1.4 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.4.1.5 |
|
|
OctetString | .1.3.6.1.4.1.25506.2.6.4.1.6 |
Notifications / Traps (103)
| Name | OID | Description |
|---|---|---|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.1 |
The hh3cEntityExtTemperatureThresholdNotification indicates the temperature exceeded the threshold. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.10 |
The trap is generated when the SFP module restores to normal status. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.11 |
This module is NOT sold by authorized manufacturer. The normal function of the device or assume the maintenance responsibility thereof will NOT be guaranteed. The trap is generated periodically after a phony module has been found. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.12 |
The trap is generated when a removable entity inserting to device. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.13 |
The trap is generated when a removable entity removing from device. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.14 |
The trap indicates the entity is forced to power off. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.15 |
The trap indicates the entity is forced to power on. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.16 |
The trap indicates a fault occurs on the specified entity. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.17 |
The trap indicates a fault disappears on the specified entity. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.18 |
The trap indicates that a kind of resource is not enough on the specified entity. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.19 |
The trap indicates that the entity recovers from the status of no enough resource. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.2 |
The hh3cEntityExtVoltageLowThresholdNotification indicates
the voltage is lower than the threshold.
If the voltage is lower too much than the entity needs,
the entity will halt.
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.20 |
The trap indicates the temperature of a specified entity is under the lower threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.21 |
The trap indicates the temperature of a specified entity exceeded the shutdown threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.22 |
The trap indicates the temperature of a specified entity recover from abnormal status. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.23 |
The trap is generated when the monitored device connected to the specified entity fails. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.24 |
The trap is generated when the failed device connected to the specified entity returns to normal. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.25 |
The trap indicates the CPU usage descends the threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.26 |
The trap indicates the memory usage descends the threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.27 |
The trap indicates the memory allocated failed. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.28 |
The trap indicates the ECC(Error Correction Code) parity error alarm. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.29 |
The hh3cEntityExtCritLowerTempThresholdNotification
indicates the temperature is lower than the threshold.
If the temperature is lower too much than the entity needs,
the entity will halt.
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.3 |
The hh3cEntityExtVoltageHighThresholdNotification indicates
the voltage is higher than the threshold.
If the voltage is higher too much than the entity needs,
The entity may be damaged by the high voltage.
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.30 |
The hh3cEntityExtTemperatureTooLow indicates the temperature
is lower than the threshold.
If the temperature is lower too much than the entity needs,
the entity halts now.
|
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.31 |
This trap indicates the specified fan's direction does not accord with preferred. The two parameters indicate the entity index and physical name of fan. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.32 |
This trap indicates the direction of fans does not accord with each other. The two parameters indicate the parent entity of the fans. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.33 |
The transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The transceiver module will be invalidated in days. Please replace it with a compatible one as soon as possible. The trap is generated periodically after a phony transceiver module has been found. |
|
hh3cEntityExtPhysicalIndex ENTITY-MIBentPhysicalName
|
.1.3.6.1.4.1.25506.2.6.2.0.34 |
This transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The trap is generated after a phony transceiver module has been found. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.35 |
This trap indicates that the memory usage of the entity is
overloaded.
This trap is used to replace
hh3cEntityExtMemUsageThresholdNotification.
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.36 |
This trap indicates that the memory usage decreased below
the threshold.
This trap is used to replace
hh3cEntityExtMemUsageThresholdRecover.
|
|
|
.1.3.6.1.4.1.25506.2.6.2.0.37 |
This trap indicates that the voltage recovers to normal. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.38 |
This trap indicates that the voltage is lower than the low threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.39 |
This trap indicates that the voltage is lower than the fatal low threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.4 |
The hh3cEntityExtCpuUsageThresholdNotfication indicates the entity is overloaded. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.40 |
This trap indicates that the voltage is higher than the high threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.41 |
This trap indicates that the voltage is higher than the fatal high threshold. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.42 |
The trap is generated when the SFP module fails or runs abnormally for some particular reason. This trap is used to replace hh3cEntityExtSFPAlarmOn. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.43 |
The trap is generated when the SFP module is restored to normal status. This trap is used to replace hh3cEntityExtSFPAlarmOff. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.5 |
The hh3cEntityExtMemUsageThresholdNotification indicates the entity is overloaded. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.6 |
The trap indicates the entity is operable at present. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.7 |
The trap indicates the entity is not operable at present. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.8 |
The hh3cEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition. |
|
|
.1.3.6.1.4.1.25506.2.6.2.0.9 |
The trap is generated when the SFP module fails or runs abnormally for some particular reason. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.1 |
The trap is generated when a system fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.10 |
The trap is generated when a board alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.11 |
The trap is generated when a board warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.12 |
The trap is generated when a board warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.13 |
The trap is generated when a power fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.14 |
The trap is generated when a power fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.15 |
The trap is generated when a power alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.16 |
The trap is generated when a power alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.17 |
The trap is generated when a power warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.18 |
The trap is generated when a power warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.19 |
The trap is generated when a fan fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.2 |
The trap is generated when a system fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.20 |
The trap is generated when a fan fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.21 |
The trap is generated when a fan alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.22 |
The trap is generated when a fan alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.23 |
The trap is generated when a fan warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.24 |
The trap is generated when a fan warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.25 |
The trap is generated when a voltage fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.26 |
The trap is generated when a voltage fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.27 |
The trap is generated when a voltage alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.28 |
The trap is generated when a voltage alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.29 |
The trap is generated when a voltage warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.3 |
The trap is generated when a system alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.30 |
The trap is generated when a voltage warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.31 |
The trap is generated when a temperature fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.32 |
The trap is generated when a temperature fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.33 |
The trap is generated when a temperature alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.34 |
The trap is generated when a temperature alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.35 |
The trap is generated when a temperature warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.36 |
The trap is generated when a temperature warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.37 |
The trap is generated when a clock fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.38 |
The trap is generated when a clock fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.39 |
The trap is generated when a clock alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.4 |
The trap is generated when a system alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.40 |
The trap is generated when a clock alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.41 |
The trap is generated when a clock warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.42 |
The trap is generated when a clock warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.43 |
The trap is generated when a disk fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.44 |
The trap is generated when a disk fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.45 |
The trap is generated when a disk alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.46 |
The trap is generated when a disk alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.47 |
The trap is generated when a disk warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.48 |
The trap is generated when a disk warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.49 |
The trap is generated when an optical fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.5 |
The trap is generated when a system warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.50 |
The trap is generated when an optical fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.51 |
The trap is generated when an optical alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.52 |
The trap is generated when an optical alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.53 |
The trap is generated when an optical warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.54 |
The trap is generated when an optical warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.55 |
The trap is generated when an internal link fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.56 |
The trap is generated when an internal link fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.57 |
The trap is generated when an internal link alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.58 |
The trap is generated when an internal link alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.59 |
The trap is generated when an internal link warning occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.6 |
The trap is generated when a system warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.60 |
The trap is generated when an internal link warning cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.7 |
The trap is generated when a board fatal alarm occurred. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.8 |
The trap is generated when a board fatal alarm cleared. |
|
|
.1.3.6.1.4.1.25506.2.6.4.0.9 |
The trap is generated when a board alarm occurred. |