HH3C-CUPM-CP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

hh3cCupmUpListTable

table
.1.3.6.1.4.1.25506.2.194.3.1 · 1 row entry · 3 columns
Open in standard view 
A table of UP management information.
hh3cCupmUpListEntry entry .1.3.6.1.4.1.25506.2.194.3.1.1
Entry items.
Indexes
hh3cCupmUpID
Column Syntax OID
hh3cCupmUpID
The index value used to identify the UP device.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.194.3.1.1.1
hh3cCupmUpDescr
A textual description of the entity. This value could
include the full name and status of UP device.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.194.3.1.1.2
hh3cCupmUpListRowStatus
Three status columns are supported, including 'active',
'createAndGo' and 'destroy'. The column of 'active' is used
for modifying value of hh3cCupmUpDescr.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.194.3.1.1.3

hh3cCupmCpProtoTnlTable

table
.1.3.6.1.4.1.25506.2.194.3.2 · 1 row entry · 8 columns
Open in standard view 
The table that controls configuration of VXLAN tunnel on CP device.
hh3cCupmCpProtoTnlEntry entry .1.3.6.1.4.1.25506.2.194.3.2.1
Entry items.
Indexes
hh3cCupmUpID hh3cCupmCpProtoTnlVxlanID hh3cCupmCpProtoTnlSrcAddrType hh3cCupmCpProtoTnlSrcAddr hh3cCupmCpProtoTnlDstAddrType hh3cCupmCpProtoTnlDstAddr
Column Syntax OID
hh3cCupmCpProtoTnlVxlanID
Part of the index for this table, this value
identifies the VXLAN protocol tunnel.
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.25506.2.194.3.2.1.1
hh3cCupmCpProtoTnlSrcAddrType
Specifies the type of local address to be used at a remote
host for connecting VXLAN protocol tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.194.3.2.1.2
hh3cCupmCpProtoTnlSrcAddr
Specifies the local address to be used at a remote
host for connecting VXLAN protocol tunnel. The host
address type is determined by the object value of corresponding
hh3cCupmCpProtoTnlSrcAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.194.3.2.1.3
hh3cCupmCpProtoTnlDstAddrType
Specifies the type of remote host for connecting the VXLAN
protocol tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.194.3.2.1.4
hh3cCupmCpProtoTnlDstAddr
Specifies the remote host for connecting the VXLAN
protocol tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.194.3.2.1.5
hh3cCupmCpProtoTnlVpnName
The VPN name, to which the rule will be applied.
Default value is zero-length.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.2.194.3.2.1.6
hh3cCupmCpProtoTnlState
The state of VXLAN protocol tunnel.
0 (unknown) The VXLAN protocol tunnel is in unknown state.
1 (up) The VXLAN protocol tunnel is in connected state.
2 (down) The VXLAN protocol tunnel is in disconnected state.
Enumeration
Enumerated Values:
0unknown
1up
2down
 .1.3.6.1.4.1.25506.2.194.3.2.1.7
hh3cCupmCpProtoTnlRowStatus
This object is responsible for managing the creation, deletion and
modification of rows, which support active status and CreateAndGo,
Destroy operation. To create a new row, hh3cCupmUpID must be specified.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.194.3.2.1.8

hh3cCupmAgtProtoTnlTable

table
.1.3.6.1.4.1.25506.2.194.3.3 · 1 row entry · 7 columns
Open in standard view 
Thie table provides VXLAN tunnel configuration of UP
device which under control of CP device.  This protocol tunnel
allows to make configuration of UP device.
hh3cCupmAgtProtoTnlEntry entry .1.3.6.1.4.1.25506.2.194.3.3.1
Entry items.
Indexes
hh3cCupmUpID hh3cCupmAgtProtoTnlVxlanID hh3cCupmAgtProtoTnlSrcAddrType hh3cCupmAgtProtoTnlSrcAddr hh3cCupmAgtProtoTnlDstAddrType hh3cCupmAgtProtoTnlDstAddr
Column Syntax OID
hh3cCupmAgtProtoTnlVxlanID
Part of the index for this table, this value
identifies the VXLAN protocol tunnel.
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.25506.2.194.3.3.1.1
hh3cCupmAgtProtoTnlSrcAddrType
Specifies the type of local address to be used at a remote
host for connecting VXLAN protocol tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.194.3.3.1.2
hh3cCupmAgtProtoTnlSrcAddr
Specifies the local address to be used at a remote
host for connecting VXLAN protocol tunnel. The host
address type is determined by the object value of corresponding
hh3cCupmCpProtoTnlSrcAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.194.3.3.1.3
hh3cCupmAgtProtoTnlDstAddrType
Specifies the type of remote host for connecting the VXLAN
protocol tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.194.3.3.1.4
hh3cCupmAgtProtoTnlDstAddr
Specifies the remote host for connecting the VXLAN
protocol tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.194.3.3.1.5
hh3cCupmAgtProtoTnlVpnName
The VPN name, to which the rule will be applied.
Default value is zero-length.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.2.194.3.3.1.6
hh3cCupmAgtProtoTnlRowStatus
This object is responsible for managing the creation, deletion and
modification of rows, which support active status and CreateAndGo,
Destroy operation. To create a new row, hh3cCupmUpID must be specified.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.194.3.3.1.7