HH3C-ACFP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
53

hh3cAcfpClientInfoTable

table
.1.3.6.1.4.1.25506.2.74.1.1.2.1 · 1 row entry · 8 columns
Open in standard view 
This table contains the basic information about ACFP client.
hh3cAcfpClientInfoEntry entry .1.3.6.1.4.1.25506.2.74.1.1.2.1.1
This list contains the basic information about ACFP client.
Indexes
hh3cAcfpClientID
Column Syntax OID
hh3cAcfpClientID
The identifier of ACFP client.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.1
hh3cAcfpClientDescription
Description of the application that is running on ACFP
client, eg. IPS, VCX.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.2
hh3cAcfpClientHwVersion
The hardware revision of ACFP client.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.3
hh3cAcfpClientOSVersion
The operating system version running ACFP client.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.4
hh3cAcfpClientAppVersion
The application version running on ACFP client
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.5
hh3cAcfpClientIP
IP address of ACFP client.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.6
hh3cAcfpClientMode
ACFP client informs Router or switch which mode it is operating.
Router or switch checks hh3cAcfpServerInfo to see whether it is
capable of fulfilling this function. If not, router or switch
generates a trap informing …
Bitsr/w
Enumerated Values:
0ipserver
1redirect
2mirror
3passThrough
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.7
hh3cAcfpClientRowStatus
RowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
Node hh3cAcfpClientMode must be bound while creating a row. It is
optional for other nodes.
ACFP module must be enabled for…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.74.1.1.2.1.1.8

hh3cAcfpPolicyTable

table
.1.3.6.1.4.1.25506.2.74.1.1.3.1 · 1 row entry · 12 columns
Open in standard view 
This table lists all current policies for ACFP
client(s).  Entries in this table are created or removed
implicitly when entries in the hh3cAcfpRuleTable are
created or removed, respectively.  A policy entry in this
table only exists as long as there is rule of this policy
in the hh3cAcfpRuleTable.  The table serves for listing the
existing policies and their remaining lifetimes and for
changing lifetimes of policies and implicitly of all policy
members and all their member policy rules can be
deleted by setting hh3cAcfpPolicyLifetime to 0.
hh3cAcfpPolicyEntry entry .1.3.6.1.4.1.25506.2.74.1.1.3.1.1
The list contains basic information of ACFP Policy.
Indexes
hh3cAcfpClientID hh3cAcfpPolicyIndex
Column Syntax OID
hh3cAcfpPolicyIndex
The identifier of the Policy of ACFP client
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.1
hh3cAcfpPolicyInIfIndex
Packet is received from this interface. The value of this object
contains the same value of ifIndex of ifTable.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.2
hh3cAcfpPolicyOutIfIndex
Packet is sent to this interface. The value of this object
contains the same value of ifIndex of ifTable.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.3
hh3cAcfpPolicyDestIfIndex
Through this interface, packet go to ACFP client from
ACFP server. The value of this object contains the same
value of ifIndex of ifTable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.4
hh3cAcfpPolicyContextID
Internal id ACFP server allocated used to map to the interface.
ACFP server may send packet with this hh3cAcfpPolicyContextID to
ACFP client, ACFP client can make use of this hh3cAcfpPolicyContextID
and find the policy.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.5
hh3cAcfpPolicyAdminStatus
The value of this object indicates the desired status of the
policy.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.6
hh3cAcfpPolicyLifetime
When retrieved, this object delivers the maximum lifetime (seconds)
of all the rules of this, i.e., of all the rows in hh3cAcfpRuleTable
that have the same values of hh3cAcfpRulePolicyIndex and
hh3cAcfpClientID. Succes…
secondsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.7
hh3cAcfpPolicyTimeStart
Beginning time of this policy every day. Eg. HH:MM:SS
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.8
hh3cAcfpPolicyTimeEnd
Ending time of this policy every day. Eg. HH:MM:SS
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.9
hh3cAcfpPolicyRowStatus
RowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
The client corresponding to the index hh3cAcfpClientID must exist
while creating a row.
Nodes hh3cAcfpPolicyTimeStart and h…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.10
hh3cAcfpPolicyDestIfFailAction
The value of this object indicates the action of the
policy when the destination interface failed.
Enumerationr/w
Enumerated Values:
1delete
2reserve
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.11
hh3cAcfpPolicyPriority
The value of this object indicates the priority of the
policy.
Priority8 is maximal priority.
Priority1 is minimal priority.
Enumerationr/w
Enumerated Values:
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
8priority8
 .1.3.6.1.4.1.25506.2.74.1.1.3.1.1.12

hh3cAcfpRuleTable

table
.1.3.6.1.4.1.25506.2.74.1.1.4.1 · 1 row entry · 33 columns
Open in standard view 
This table lists all the rules.  It is indexed by
hh3cAcfpClientID, hh3cAcfpRulePolicyIndex and hh3cAcfpRuleIndex.
Entries can be deleted by writing hh3cAcfpPolicyLifetime to 0.
hh3cAcfpRuleEntry entry .1.3.6.1.4.1.25506.2.74.1.1.4.1.1
The list contains basic information of the rule.
Indexes
hh3cAcfpClientID hh3cAcfpPolicyIndex hh3cAcfpRuleIndex
Column Syntax OID
hh3cAcfpRuleIndex
The identifier of the rules which have the same hh3cAcfpPolicyIndex
and hh3cAcfpClientID.hh3cAcfpRuleIndex indicates rule sequence in the
same policy.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.1
hh3cAcfpRuleOperStatus
The value of this object indicates the status of a rule.
success : Applied rule to interface successfully.
fail : Failed to apply rule to interface.
Enumeration
Enumerated Values:
1success
2fail
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.2
hh3cAcfpRuleAction
The action of this rule.
Enumerationr/w
Enumerated Values:
1permit
2deny
3redirect
4mirror
5rate
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.3
hh3cAcfpRuleAll
The rule match all packet or does not.
true : all
false : not all
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.4
hh3cAcfpRuleSrcMAC
Source MAC of this rule.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.5
hh3cAcfpRuleDstMAC
Destination MAC of this rule.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.6
hh3cAcfpRuleVlanStart
Starting VLAN id of this rule.
0 : Invalid value
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.7
hh3cAcfpRuleVlanEnd
Ending VLAN id of this rule.
0 : Invalid value
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.8
hh3cAcfpRuleProtocol
The protocol-type of this rule.
<0-255> Protocol number
gre GRE tunneling(47)
icmp Internet Control Message Protocol(1)
igmp Internet Management Protocol(2)
ip Any IP protocol(0)
ipinip IP in IP tu…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.9
hh3cAcfpRuleSrcIP
Source IP address of this rule.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.10
hh3cAcfpRuleSrcIPMask
Source IP-address wild of this rule. Eg. 0.0.0.255.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.11
hh3cAcfpRuleSrcOp
Source Port operation for this rule
Enumerationr/w
Enumerated Values:
1equal
2notEqual
3lessThan
4greaterThan
5range
6invalid
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.12
hh3cAcfpRuleSrcStartPort
Starting UDP/TCP Source Port number of this rule.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.13
hh3cAcfpRuleSrcEndPort
Ending UDP/TCP Source Port of this rule.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.14
hh3cAcfpRuleDstIP
Destination IP address of this rule.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.15
hh3cAcfpRuleDstIPMask
Destination IP-address wild of this rule. Eg. 0.0.0.255
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.16
hh3cAcfpRuleDstOp
Destination Port operation for this rule
Enumerationr/w
Enumerated Values:
1equal
2nonEqual
3lessThan
4greaterThan
5range
6invalid
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.17
hh3cAcfpRuleDstStartPort
Starting UDP/TCP Destination Port number of this rule.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.18
hh3cAcfpRuleDstEndPort
Ending UDP/TCP Destination Port of this rule.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.19
hh3cAcfpRulePrecedence
The value of precedence field in IP header.
<255> Invalid value
<0-7> value of precedence
routine(0) Routine precedence
priority(1) Priority precedence
immediate(…
Integer32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.20
hh3cAcfpRuleTos
The value of TOS field in IP header.
<255> Invalid value
<0-15> value of ToS (Type of Service)
Normal(0) normal service
min-monetary-cost(1) minimum monetary cost
max-reli…
Integer32r/w
Constraints:
range: 255-255
range: 0-15
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.21
hh3cAcfpRuleDscp
The value of DSCP.
<255> Invalid value
<0-63> value of DSCP
Be(0) best effort
af11(10) assured forwarding 11 service
af12(12) assured forward…
Integer32r/w
Constraints:
range: 255-255
range: 0-63
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.22
hh3cAcfpRuleEstablish deprecated
Establish Flag. Matches the TCP packets with the ACK
and/or RST flag, including the TCP packets of these
types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.23
hh3cAcfpRuleFragment
The flag of matching fragmented packet.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.24
hh3cAcfpRulePacketRate
Packet rate (Kbps) of this rule.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.25
hh3cAcfpRuleRowStatus
RowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
Node hh3cAcfpRuleAction must be bound while creating a line.
Nodes hh3cAcfpRuleAll and hh3cAcfpRuleProtocol, hh3cAcfpRuleSr…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.26
hh3cAcfpRuleTCPFlag
TCP Flag.
<0> don't care for TCP flag to match packets
<1-65535> care for TCP flag to match packets,
the value is combination of next list.
URG_VALID (1 << 13)
URG_SET (1 << 5)
…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.27
hh3cAcfpRuleSrcIPV6Address
Source IPv6 address of this rule.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.28
hh3cAcfpRuleSrcPrefixLen
Source IPv6 address prefix length of this rule. Eg. 64.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.29
hh3cAcfpRuleDstIPV6Address
Destination IPv6 address of this rule.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.30
hh3cAcfpRuleDstPrefixLen
Destination IPv6 address prefix length of this rule. Eg. 64.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.31
hh3cAcfpRuleTrafficType
Traffic type of this rule. When retrieved, this object
returns a set of bits indicating the traffic type.
Bitsr/w
Enumerated Values:
0unicast
1multicast
2broadcast
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.32
hh3cAcfpRuleTypeOrLen
The type or length of ethernet packet.
For Ethernet II encapsulation, it stands for packet type.
For 802.3 encapsulation, it stands for packet length.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.74.1.1.4.1.1.33