H3C-PPP-OVER-SONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
28

h3cPosParamTable

table
.1.3.6.1.4.1.2011.10.2.19.1.1 · 1 row entry · 28 columns
Open in standard view 
The pos parameter table.
h3cPosParamTableEntry entry .1.3.6.1.4.1.2011.10.2.19.1.1.1
The entry of pos table.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cPosCRC
The length of CRC
Enumerationr/w
Enumerated Values:
1crc32
2crc16
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.1
h3cPosMTU
Maximum Transfer Unit (MTU) of POS interface
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.2
h3cPosScramble
Scrambling is used to avoid continuous 0 or 1 in signals. This
object is to decide whether to scramble or not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.3
h3cPosClockSource
The value indicates the source of clock signal. System indicates
that clock signals are from device itself and line for clock signals
from remote
Enumerationr/w
Enumerated Values:
1system
2line
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.4
h3cPosSdhFlagJ0
The section trace byte. This node is used when the frame type is sdh.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.5
h3cPosSdhFlagJ1
The path trace byte. This node is used when the frame type is sdh.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.6
h3cPosSonetFlagJ0
The section trace byte. This node is used when the frame type is sonet.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.7
h3cPosSonetFlagJ1
The path trace byte. This node is used when the frame type is sonet.
OctetStringr/w
Constraints:
range: 0-62
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.8
h3cPosFlagC2
The parameter for the channel signal value of C2 byte
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.9
h3cPosFrameType
The frame type that encapsulates the packet. Default frame type is
sdh(Synchronous Digital Hierarchy) It also can be configured using
sonet type(Synchronous Optical Network).
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.10
h3cPosBindVlanId
The vlan that this pos port binds. The vlan can not include any other
port, otherwise error will be returned. If the vlan has a virtual
interface, the status of virtual interface will be up or down according
to the link…
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.11
h3cPosEncapsulation
The type of encapsulation
Enumerationr/w
Enumerated Values:
1ppp
2hdlc
3fr
4mfr
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.12
h3cPoskeepaliveTimeout
The keeplive of ppp, hdlc, fr or mfr. It is the query interval of link status. Two
members of a link should have same keeplive. The default 0 prohibits
detecting status of link.
Integer32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.13
h3cPosBERthresholdSF
The bit-error rate threshold for Signal Fault. SF threshold should
be greater than SD threshold.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.14
h3cPosBERthresholdSD
The bit-error rate threshold for Signal Degrade. SD threshold should
be less than SF threshold.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.15
h3cPosB1Error
Counter for SBIPE(Section Bit Interleave Parity Error)
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.16
h3cPosB2Error
Counter for LBIPE(Line Bit Interleave Parity Error)
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.17
h3cPosB3Error
Counter for PBIPE(Path Bit Interleave Parity Error)
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.18
h3cPosM1Error
How many times does LREI(Line Remote Error Indication) occur
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.19
h3cPosG1Error
How many times does PREI(Path Remote Error Indication) occur
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.20
h3cPosFlagJ0Type
The frame type that encapsulates the flag J0. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.21
h3cPosFlagJ1Type
The frame type that encapsulates the flag J1. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.22
h3cPosB1TCAThreshold
Threshold for B1 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.23
h3cPosB2TCAThreshold
Threshold for B2 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.24
h3cPosB3TCAThreshold
Threshold for B3 TCA.
Integer32r/w
Constraints:
range: 3-9
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.25
h3cPosB1TCAEnable
Enable traps of B1 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.26
h3cPosB2TCAEnable
Enable traps of B2 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.27
h3cPosB3TCAEnable
Enable traps of B3 TCA.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.10.2.19.1.1.1.28