H3C-NAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
88

h3cNATPoolInfoTable

table
.1.3.6.1.4.1.2011.10.2.18.2.1 · 1 row entry · 6 columns
Open in standard view 
NAT address pool table : The address in the pool is
the IP address in the global network. The pool can span
255 IP addresses.All address pools configured by administrator
are recorded in this table.
h3cNATPoolInfoEntry entry .1.3.6.1.4.1.2011.10.2.18.2.1.1
The entry of NAT address pool table.
Indexes
h3cNATPoolIdx
Column Syntax OID
h3cNATPoolIdx
Index of the address pool: The index uniquely indicates
the address pool in the system, and its range is from 1 to 320.
Integer32
Constraints:
range: 1-320
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.1
h3cNATPoolStartIpAddr
The start IP address of address pool:
It must be less than or equal to the end IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.2
h3cNATPoolEndIpAddr
The end IP address of address pool:
It must be more than or equal to the start IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.3
h3cNATPoolSlotNo
The number of NAT board to which the address pool is bound.
The address translation is processed by this NAT board .
The relation between address pool and slotNo is n:1.
When the address pool is not bound to the NAT boa…
Integer32r/w
Constraints:
range: 1-14
range: 255-255
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.4
h3cNATPoolRefCounter
The counter of reference. An address pool can be associated with
more than one ACL and the counter of reference is recorded in this
field. When the address pool is not associated with ACL, the value is 0.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.5
h3cNATPoolRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATPoolIdx, h3cNATPoolStartIpAddr and
h3cNATPoolEndIpAddr were provided correctly,
its value is changed 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.1.1.6

h3cNATOutboundTable

table
.1.3.6.1.4.1.2011.10.2.18.2.2 · 1 row entry · 5 columns
Open in standard view 
NAT out bound table: through associating ACL number,
address pool with NAT board, administrator can designate
which inside IP address can be translated to global IP
address in the pool and the translation is processed by
which NAT board.
h3cNATOutboundEntry entry .1.3.6.1.4.1.2011.10.2.18.2.2.1
The entry of NAT out bound table.
Indexes
IF-MIBifIndex h3cNATOutboundAclNo
Column Syntax OID
h3cNATOutboundAclNo
The number of ACL(Access Control List). When the packet accords with
the rule in the ACL, its source IP address will be translated to IP
address in Address pool.
Integer32
Constraints:
range: 2000-3999
 .1.3.6.1.4.1.2011.10.2.18.2.2.1.1
h3cNATOutboundPoolIdx
The index of address pool in h3cNATPoolInfoTable.
when administrator doesn't use the address pool and
use the IP address of the interface as the address of
global network, the value is 2147483647.
Integer32r/w
Constraints:
range: 0-320
range: 2147483647-2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.2.1.2
h3cNATOutboundIsNoPat
Whether to use no pat manner. The translation of no pat
is that the translation doesn't use the port information of packet.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.18.2.2.1.3
h3cNATOutboundSlotNo
The number of NAT board. In router, the value is 255 because no NAT board in it.
Integer32r/w
Constraints:
range: 1-14
range: 255-255
 .1.3.6.1.4.1.2011.10.2.18.2.2.1.4
h3cNATOutboundRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATOutboundAclNo or h3cNATOutboundAclNo
and h3cNATOutboundPoolIdx were provided correctly,
its value is changed 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.2.1.5

h3cNATServerTable

table
.1.3.6.1.4.1.2011.10.2.18.2.3 · 1 row entry · 11 columns
Open in standard view 
NAT inside Server Table.  Administrator can configure server in the
private network which can provide service for people in the public network.
The translation map is :
(InsideIP     , InsidePort--> GlobalIP, GlobalPort    )
(InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1)
(InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2)
...
...
...
(InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2))
h3cNATServerEntry entry .1.3.6.1.4.1.2011.10.2.18.2.3.1
The entry of NAT inside server table.
Indexes
IF-MIBifIndex h3cNATServerProType h3cNATServerGlobalIP h3cNATServerStartGlobalPort h3cNATServerVpnIndex
Column Syntax OID
h3cNATServerProType
The type of protocol: icmp(1), tcp(6), udp(17) and others.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.1
h3cNATServerGlobalIP
The global IP address of Inside Server.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.2
h3cNATServerStartGlobalPort
The start global port of Inside Server.
When the port need not be configured, the value is 0.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.3
h3cNATServerEndGlobalPort
The end global port of Inside Server. When administrator doesn't
configure a series of inside server, the value is 0.
If the value is not zero, the value of (GlobalPort2-GlobalPort)
must be equal to (InsideIP2 - Inside…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.4
h3cNATServerStartInsideIP
The start private IP address of Inside Server.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.5
h3cNATServerEndInsideIP
The end private IP address of Inside Server. When administrator doesn't
configure a series of inside server, the value is 0.0.0.0.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.6
h3cNATServerInsidePort
The private port of Inside Server.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.7
h3cNATServerSlotNo
The number of NAT board. In router, the value is 255 because no NAT board in it.
Integer32r/w
Constraints:
range: 1-14
range: 255-255
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.8
h3cNATServerVpnIndex
The VPN index of server.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.10
h3cNATServerAclNumber
Number of basic or advanced ACL.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.11
h3cNATServerRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATServerProType, h3cNATServerGlobalIP, h3cNATServerGlobalPort
and h3cNATServerInsideIP were provided correctly,
its value is changed 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.3.1.12

h3cNATTimeOutTable

table
.1.3.6.1.4.1.2011.10.2.18.2.4 · 1 row entry · 2 columns
Open in standard view 
NAT Time out Table. When a connection is established,
if there are not any actives in this connection between
the time, it will be disconnected.
h3cNATTimeOutEntry entry .1.3.6.1.4.1.2011.10.2.18.2.4.1
The entry of NAT Time out Table.
Indexes
h3cNATTimeOutProtocol
Column Syntax OID
h3cNATTimeOutProtocol
The type of protocol.
Enumeration
Enumerated Values:
1tcp
2udp
3icmp
4pptp
5dns
6tcpFin
7tcpSyn
8ftpCtrl
9ftpData
 .1.3.6.1.4.1.2011.10.2.18.2.4.1.1
h3cNATTimeOutTimeValue
The time of time out.
Integer32r/w
Constraints:
range: 10-86400
 .1.3.6.1.4.1.2011.10.2.18.2.4.1.2

h3cNATBLEnableTable

table
.1.3.6.1.4.1.2011.10.2.18.2.5 · 1 row entry · 2 columns
Open in standard view 
NAT blacklist function Enable Table.  In this table, administrator can decide
whether to start the function of blacklist in the NAT board.
When the function of blacklist can't be set for a NAT board,
the number of NAT board is 256.
h3cNATBLEnableEntry entry .1.3.6.1.4.1.2011.10.2.18.2.5.1
The entry of NAT blacklist Enable Table.
Indexes
h3cNATBLEnableSlotNo
Column Syntax OID
h3cNATBLEnableSlotNo
The number of NAT board.
When the function of blacklist can't be set for a NAT board,
the value is 255.
Integer32
Constraints:
range: 1-14
range: 255-255
 .1.3.6.1.4.1.2011.10.2.18.2.5.1.1
h3cNATBLEnable
Start or stop of function of balcklist.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.10.2.18.2.5.1.2

h3cNATBLIPConnectLimitParaTable

table
.1.3.6.1.4.1.2011.10.2.18.2.6 · 1 row entry · 5 columns
Open in standard view 
The table of connection control of special IP address.  In this table, administrator can decide to
adopt which manner to control the connection which IP address is the
special IP address.
h3cNATBLIPConnectLimitParaEntry entry .1.3.6.1.4.1.2011.10.2.18.2.6.1
The entry of the table of connection control of special IP address.
Indexes
h3cNATBLIPConnectLimitParaIP
Column Syntax OID
h3cNATBLIPConnectLimitParaIP
The special IP address. The IP is private IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.6.1.1
h3cNATBLIPConnectHighValue
The maximal connection amount. It must be more than the minimal connection amount.
Integer32r/w
Constraints:
range: 20-20000
 .1.3.6.1.4.1.2011.10.2.18.2.6.1.2
h3cNATBLIPConnectLowValue
The minimal connection amount. It must be less than the maximal connection amount.
Integer32r/w
Constraints:
range: 20-20000
 .1.3.6.1.4.1.2011.10.2.18.2.6.1.3
h3cNATBLIPUseSpecialConnectRate
Whether to use the special connection rate control.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.18.2.6.1.4
h3cNATBLIPConnectLimitRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATBLIPConnectHighValue, h3cNATBLIPConnectLowValue
and h3cNATBLIPUseSpecialConnectRate were provided correctly,
its value is changed 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.6.1.5

h3cNATBLManagerTable

table
.1.3.6.1.4.1.2011.10.2.18.2.7 · 1 row entry · 4 columns
Open in standard view 
The management table of blacklist.
The table doesn't support 'getnext' operation.
h3cNATBLManagerEntry entry .1.3.6.1.4.1.2011.10.2.18.2.7.1
The entry of management table of blacklist.
Indexes
h3cNATBLIpAdress h3cNATBLSlotNo
Column Syntax OID
h3cNATBLIpAdress
The IP address of entry of blacklist.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.7.1.1
h3cNATBLSlotNo
The number of NAT board.
Integer32
Constraints:
range: 1-14
 .1.3.6.1.4.1.2011.10.2.18.2.7.1.2
h3cNATBLConSum
The connection amount.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.7.1.3
h3cNATBLConSpd
The state of connection rate:
red(1) : the connection rate is above the upper limit.
yellow(2): the connection rate is between the upper and lower limit.
green(3) : the connection rate is below the lower limit.
Enumeration
Enumerated Values:
1red
2yellow
3green
 .1.3.6.1.4.1.2011.10.2.18.2.7.1.4

h3cNATStatTable

table
.1.3.6.1.4.1.2011.10.2.18.2.8 · 1 row entry · 13 columns
Open in standard view 
The statistics information table of NAT module.
h3cNATStatEntry entry .1.3.6.1.4.1.2011.10.2.18.2.8.1
The entry of statistics information table of NAT module.
Indexes
h3cNATStatNATBoardNo
Column Syntax OID
h3cNATStatNATBoardNo
The number of NAT board. In router, the value is 255 because no NAT board in it.
Integer32
Constraints:
range: 1-14
range: 255-255
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.1
h3cNATStatActiveTblCount
Active PAT session count In software.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.2
h3cNATStatActiveTblCountInNP
Active PAT session count In NP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.3
h3cNATStatActiveNatTblCount
Active NO-PAT session count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.4
h3cNATStatActiveSvrTblCount
Active SERVER session count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.5
h3cNATStatActivePoolTblCount
Active address pool session count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.6
h3cNATStatNumOfUsedPort
The number of used port in NP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.7
h3cNATStatNumOfGoodPkt
The number of good packet in NP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.8
h3cNATStatNumOfBadPkt
The number of bad packet in NP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.9
h3cNATStaticSessionCount
Active STATIC session count.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.10
h3cNATFragmentSessionCount
Active fragment packet session count.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.11
h3cNATSequenceSessionCount
Active session table count hash by private IP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.12
h3cNATLogCount
Buffered Nat LOG table count.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.8.1.13

h3cNATSessionTable

table
.1.3.6.1.4.1.2011.10.2.18.2.9 · 1 row entry · 12 columns
Open in standard view 
The nat session information table.  There is the address translation information in the table.
The sketch map of connection is
pc1(private Net)------------------>NAT Device ------------------>Server(public Net)
InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort.
h3cNATSessionEntry entry .1.3.6.1.4.1.2011.10.2.18.2.9.1
The entry of session information table.
Indexes
h3cNATSessionHashNumber h3cNATSessionProtocol h3cNATSessionInsideIP h3cNATSessionInsidePort h3cNATSessionPeerIP h3cNATSessionPeerPort h3cNATSessionVpnIndex
Column Syntax OID
h3cNATSessionHashNumber
The row number of the hash table.
Integer32
Constraints:
range: 1-300000
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.1
h3cNATSessionProtocol
The protocol type of session.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.2
h3cNATSessionGlobalIP
The global IP of session.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.3
h3cNATSessionGlobalPort
The global port of session.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.4
h3cNATSessionInsideIP
The Inside IP of session.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.5
h3cNATSessionInsidePort
The Inside port of session.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.6
h3cNATSessionPeerIP
The peer IP of session.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.7
h3cNATSessionPeerPort
The peer port of session.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.8
h3cNATSessionVpnIndex
The VPN index of session.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.9
h3cNATSessionTTL
The TTL of session.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.10
h3cNATSessionStatus
The status of session.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.11
h3cNATSessionLeftTime
The Left time of session.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.9.1.12

h3cNATStaticConfTable

table
.1.3.6.1.4.1.2011.10.2.18.2.10 · 1 row entry · 3 columns
Open in standard view 
Static Nat configuration table.
h3cNATStaticConfEntry entry .1.3.6.1.4.1.2011.10.2.18.2.10.1
Configure static Nat.
Indexes
h3cNATStaticInsideIp
Column Syntax OID
h3cNATStaticInsideIp
Inside ip address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.10.1.1
h3cNATStaticGlobalIp
Global Ip address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.10.1.2
h3cNATStaticRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATStaticInsideIp and h3cNATStaticGlobalIp were provided correctly,
its value is changed 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.10.1.3

h3cNATStaticEnableTable

table
.1.3.6.1.4.1.2011.10.2.18.2.11 · 1 row entry · 1 columns
Open in standard view 
Active the static Nat on interface.
h3cNATStaticEnableEntry entry .1.3.6.1.4.1.2011.10.2.18.2.11.1
Active the static Nat on interface.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cNATStaticEnable
Enable/disable the static Nat on the interface(h3cNatStaticEnableIfIndex).
disable (0)
enable (1)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.10.2.18.2.11.1.2

h3cNATDnsMapTable

table
.1.3.6.1.4.1.2011.10.2.18.2.12 · 1 row entry · 6 columns
Open in standard view 
This table is used to set mapping of DNS.
h3cNATDnsMapEntry entry .1.3.6.1.4.1.2011.10.2.18.2.12.1
The entry of h3cNATDnsMapTable.
Indexes
h3cNATDnsMapDomainName
Column Syntax OID
h3cNATDnsMapDomainName
Domain name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.1
h3cNATDnsMapGlobalIp
Global IP address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.2
h3cNATDnsMapGlobalPort
Global port number.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.3
h3cNATDnsMapProtocolType
TCP Transmission Control Protocol.
UDP User Datagram Protocol.
Enumerationr/w
Enumerated Values:
0any
1typeTCP
2typeUDP
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.4
h3cNATDnsMapLastUseTime
Its value is the time that the device uses
from startup to last use 'Dns Map'record.
If the value is 0,the device never use this
record.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.5
h3cNATDnsMapRowStatus
Only support 'destroy' and 'createAndGo'.
If h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp
and h3cNATDnsMapGlobalPortor h3cNATDnsMapDomainName,
h3cNATDnsMapGlobalIp, h3cNATDnsMapGlobalPort and
h3cNATDnsMapProtocolType we…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.18.2.12.1.6

h3cNATStatVer2Table

table
.1.3.6.1.4.1.2011.10.2.18.2.13 · 1 row entry · 12 columns
Open in standard view 
The new statistics of NAT.
h3cNATStatVer2TableEntry entry .1.3.6.1.4.1.2011.10.2.18.2.13.1
An entry (conceptual row) representing NAT
statistics information.
Indexes
h3cNATStatChassis h3cNATStatSlot h3cNATStatCPUID
Column Syntax OID
h3cNATStatChassis
An IRF member device ID.
Unsigned32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.1
h3cNATStatSlot
The slot where the card resides.
Unsigned32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.2
h3cNATStatCPUID
CPU ID.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.3
h3cNATTotalNATSessionCount
The number of current NAT sessions.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.4
h3cNATEimTableCount
The number of current EIM tables.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.5
h3cNATInboundNoPATTableCount
The number of current NO-PAT tables built on NAT inbound
translation.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.6
h3cNATOutboundNoPATTableCount
The number of current NO-PAT tables built on NAT outbound
translation.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.7
h3cNATMaxDynamicPortblock
The number of current NAT444 dynamic port blocks.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.8
h3cNATMaxStaticPortblock
The number of current NAT444 static port blocks.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.9
h3cNATActiveDynamicPortblock
The number of current active NAT444 dynamic port blocks.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.10
h3cNATActiveStaticPortblock
The number of current active NAT444 static port blocks.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.11
h3cNATSessionCreateRate
The rate of nat session create.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.13.1.12

h3cNATAddrGrpStatTable

table
.1.3.6.1.4.1.2011.10.2.18.2.14 · 1 row entry · 6 columns
Open in standard view 
The statistics of NAT address groups.
h3cNATAddrGrpStatTableEntry entry .1.3.6.1.4.1.2011.10.2.18.2.14.1
An entry (conceptual row) representing NAT
address group statistics.
Indexes
h3cNATAddrGrpStatChassis h3cNATAddrGrpStatSlot h3cNATAddrGrpStatCPUID h3cNATAddrGrpStatAddrGrpNum
Column Syntax OID
h3cNATAddrGrpStatChassis
An IRF member device ID.
Unsigned32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.1
h3cNATAddrGrpStatSlot
The slot where the card resides.
Unsigned32
Constraints:
range: 0-65534
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.2
h3cNATAddrGrpStatCPUID
CPU ID.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.3
h3cNATAddrGrpStatAddrGrpNum
The NAT address group number.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.4
h3cNATAddrGrpStatFailAllocPort
The count of NAT port allocation failures.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.5
h3cNATAddrGrpStatAddrGrpSessCnt
The session count of current NAT address group.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.18.2.14.1.6