H3C-IPSEC-MONITOR-V2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
94

h3cIPsecTunnelV2Table

table
.1.3.6.1.4.1.2011.10.2.126.1.2 · 1 row entry · 34 columns
Open in standard view 
The IPsec Phase-2 Tunnel Table.  There is one entry in this
table for each active IPsec Phase-2 Tunnel.
h3cIPsecTunnelV2Entry entry .1.3.6.1.4.1.2011.10.2.126.1.2.1
Information about h3cIPsecTunnelV2Table.
Indexes
No indexes recorded
Column Syntax OID
h3cIPsecTunIndexV2
The index of IPsec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2147483647.
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.1
h3cIPsecTunIfIndexV2
The interface index( the ifIndex of ifTable ).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.2
h3cIPsecTunIKETunnelIndexV2
The index of the associated IPsec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.3
h3cIPsecTunIKETunLocalIDTypeV2
The type of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable).
H3cIPsecIDTypeV2
Textual Convention: H3cIPsecIDTypeV2 Enumeration
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.4
h3cIPsecTunIKETunLocalIDVal1V2
The value of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to iden…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.5
h3cIPsecTunIKETunLocalIDVal2V2
The second specification of the local peer's IP address for the
associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the
IKETunnelTable).

If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.6
h3cIPsecTunIKETunRemoteIDTypeV2
The type of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable).
H3cIPsecIDTypeV2
Textual Convention: H3cIPsecIDTypeV2 Enumeration
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.7
h3cIPsecTunIKETunRemoteIDVal1V2
The value of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to i…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.8
h3cIPsecTunIKETunRemoteIDVal2V2
The second specification of the remote peer's IP address for the
associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
IKETunnelTable).

If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, th…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.9
h3cIPsecTunLocalAddrTypeV2
The type of the IP address for the local peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.10
h3cIPsecTunLocalAddrV2
The IP address of the local peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.11
h3cIPsecTunRemoteAddrTypeV2
The type of the IP address for the remote peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.12
h3cIPsecTunRemoteAddrV2
The IP address of the remote peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.13
h3cIPsecTunKeyTypeV2
The key negotiate mode used by the IPsec Phase-2 Tunnel.
H3cIPsecNegoTypeV2
Textual Convention: H3cIPsecNegoTypeV2 Enumeration
Type Values:
1ike
2manual
2147483647invalidType
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.14
h3cIPsecTunEncapModeV2
The encapsulation mode used by the IPsec Phase-2 Tunnel.
H3cIPsecEncapModeV2
Textual Convention: H3cIPsecEncapModeV2 Enumeration
Type Values:
1tunnel
2transport
2147483647invalidMode
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.15
h3cIPsecTunInitiatorV2
The initiator of this IPsec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.
Enumeration .1.3.6.1.4.1.2011.10.2.126.1.2.1.16
h3cIPsecTunLifeSizeV2
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.17
h3cIPsecTunLifeTimeV2
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.18
h3cIPsecTunRemainTimeV2
The remain time of SA in seconds. 2147483647 is defined as invalid
value.
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.19
h3cIPsecTunActiveTimeV2
The duration the IPsec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.20
h3cIPsecTunRemainSizeV2
The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.21
h3cIPsecTunTotalRefreshesV2
The total number of security association refreshing performed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.22
h3cIPsecTunCurrentSaInstancesV2
The number of security associations which are currently active
or expiring.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.23
h3cIPsecTunInSaEncryptAlgoV2
The encryption algorithm used by the inbound security association
of the IPsec Phase-2 Tunnel.
H3cIPsecEncryptAlgoV2
Textual Convention: H3cIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.24
h3cIPsecTunInSaAhAuthAlgoV2
The authentication algorithm used by the inbound authentication
header (AH) security association of the IPsec Phase-2 Tunnel.
H3cIPsecAuthAlgoV2
Textual Convention: H3cIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.25
h3cIPsecTunInSaEspAuthAlgoV2
The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
H3cIPsecAuthAlgoV2
Textual Convention: H3cIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.26
h3cIPsecTunDiffHellmanGrpV2
The Diffie Hellman Group used by the security association of the
IPsec Phase-2 Tunnel.
H3cIPsecDiffHellmanGrpV2
Textual Convention: H3cIPsecDiffHellmanGrpV2 Enumeration
Type Values:
0none
1dhGroup1
2dhGroup2
5dhGroup5
14dhGroup14
24dhGroup24
2147483647invalidGroup
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.27
h3cIPsecTunOutSaEncryptAlgoV2
The encryption algorithm used by the outbound security
association of the IPsec Phase-2 Tunnel.
H3cIPsecEncryptAlgoV2
Textual Convention: H3cIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.28
h3cIPsecTunOutSaAhAuthAlgoV2
The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel.
H3cIPsecAuthAlgoV2
Textual Convention: H3cIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.29
h3cIPsecTunOutSaEspAuthAlgoV2
The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
H3cIPsecAuthAlgoV2
Textual Convention: H3cIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.30
h3cIPsecTunPolicyNameV2
The policy name used by this IPsec tunnel.
OctetString .1.3.6.1.4.1.2011.10.2.126.1.2.1.31
h3cIPsecTunPolicyNumV2
The sequence number of policy used by this IPsec tunnel.
Integer32
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.32
h3cIPsecTunStatusV2
The status of the IPsec Tunnel.
Enumeration
Enumerated Values:
1local
2remote
3reject
4drop
 .1.3.6.1.4.1.2011.10.2.126.1.2.1.33
h3cIPsecTunPolicyDescriptionV2
IPsec policy description of an IPsec tunne.
OctetString .1.3.6.1.4.1.2011.10.2.126.1.2.1.34

h3cIPsecTunnelStatV2Table

table
.1.3.6.1.4.1.2011.10.2.126.1.3 · 1 row entry · 17 columns
Open in standard view 
The IPsec Phase-2 Tunnel Statistics Table.
h3cIPsecTunnelStatV2Entry entry .1.3.6.1.4.1.2011.10.2.126.1.3.1
Information about h3cIPsecTunnelStatV2Table.
Indexes
No indexes recorded
Column Syntax OID
h3cIPsecTunInOctetsV2
The total number of octets received by this IPsec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.1
h3cIPsecTunInDecompOctetsV2
The total number of decompressed octets received by this IPsec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.2
h3cIPsecTunInPktsV2
The total number of packets received by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.3
h3cIPsecTunInDropPktsV2
The total number of packets dropped during receiving process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.4
h3cIPsecTunInReplayDropPktsV2
The total number of packets dropped during
receiving process due to Anti-Replay process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.5
h3cIPsecTunInAuthFailsV2
The total number of inbound authentication's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.6
h3cIPsecTunInDecryptFailsV2
The total number of inbound decryption's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Enumerated Values:
1valid
2invalid
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.7
h3cIPsecTunOutOctetsV2
The total number of octets sent by this IPsec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Enumerated Values:
1other
2vlan
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.8
h3cIPsecTunOutUncompOctetsV2
The total number of uncompressed octets sent by this IPsec Phase-2
Tunnel. This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.9
h3cIPsecTunOutPktsV2
The total number of packets sent by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.10
h3cIPsecTunOutDropPktsV2
The total number of packets dropped during sending process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.11
h3cIPsecTunOutEncryptFailsV2
The total number of outbound encryption's which ended in failure
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.12
h3cIPsecTunNoMemoryDropPktsV2
The total number of packets dropped due to no enough memory by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Enumerated Values:
1untagged
2tagged
3basedPortConfig
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.13
h3cIPsecTunQueueFullDropPktsV2
The total number of packets dropped due to queue full by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.14
h3cIPsecTunInvalidLenDropPktsV2
The total number of packets dropped due to invalid length packet
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.15
h3cIPsecTunTooLongDropPktsV2
The total number of packets dropped due to too long packet by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.16
h3cIPsecTunInvalidSaDropPktsV2
The total number of packets dropped due to invalid SA by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.3.1.17

h3cIPsecSaV2Table

table
.1.3.6.1.4.1.2011.10.2.126.1.4 · 1 row entry · 7 columns
Open in standard view 
The IPsec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.
h3cIPsecSaV2Entry entry .1.3.6.1.4.1.2011.10.2.126.1.4.1
Information about h3cIPsecSaV2Table.
Indexes
No indexes recorded
Column Syntax OID
h3cIPsecSaIndexV2
The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPsec Phase-2 Tunnel. The value of this object …
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.4.1.1
h3cIPsecSaDirectionV2
The direction of the SA.
Enumeration .1.3.6.1.4.1.2011.10.2.126.1.4.1.2
h3cIPsecSaSpiValueV2
The value of the SPI.
Unsigned32 .1.3.6.1.4.1.2011.10.2.126.1.4.1.3
h3cIPsecSaSecProtocolV2
The security protocol of the SA.
H3cIPsecSaProtocolV2
Textual Convention: H3cIPsecSaProtocolV2 Enumeration
Type Values:
0reserved
2ah
3esp
4ipcomp
 .1.3.6.1.4.1.2011.10.2.126.1.4.1.4
h3cIPsecSaEncryptAlgoV2
The encryption algorithm used by the security association
of the IPsec Phase-2 Tunnel.
H3cIPsecEncryptAlgoV2
Textual Convention: H3cIPsecEncryptAlgoV2 Enumeration
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.4.1.5
h3cIPsecSaAuthAlgoV2
The authentication algorithm used by the SA.
H3cIPsecAuthAlgoV2
Textual Convention: H3cIPsecAuthAlgoV2 Enumeration
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
2147483647invalidAlg
 .1.3.6.1.4.1.2011.10.2.126.1.4.1.6
h3cIPsecSaStatusV2
The status of the SA.
Enumeration
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.2011.10.2.126.1.4.1.7

h3cIPsecTrafficV2Table

table
.1.3.6.1.4.1.2011.10.2.126.1.5 · 1 row entry · 18 columns
Open in standard view 
The IPsec Phase-2 Tunnel Traffic Table.
h3cIPsecTrafficV2Entry entry .1.3.6.1.4.1.2011.10.2.126.1.5.1
Information about h3cIPsecTrafficV2Table.
Indexes
No indexes recorded
Column Syntax OID
h3cIPsecTrafficLocalTypeV2
The type of the local peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
H3cIPsecTrafficTypeV2
Textual Convention: H3cIPsecTrafficTypeV2 Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.1
h3cIPsecTrafficLocalAddr1TypeV2
The type of the first IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.2
h3cIPsecTrafficLocalAddr1V2
The first IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet,…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.3
h3cIPsecTrafficLocalAddr2TypeV2
The type of the second IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.4
h3cIPsecTrafficLocalAddr2V2
The second IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.5
h3cIPsecTrafficLocalProtocol1V2
The first protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type o…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.6
h3cIPsecTrafficLocalProtocol2V2
The second protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type …
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.7
h3cIPsecTrafficLocalPort1V2
The first port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's t…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.8
h3cIPsecTrafficLocalPort2V2
The second port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's …
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.9
h3cIPsecTrafficRemoteTypeV2
The type of the remote peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
H3cIPsecTrafficTypeV2
Enumerated Values:
1novell
2ethernet
3llc
4snap
Textual Convention: H3cIPsecTrafficTypeV2 Enumeration
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.10
h3cIPsecTrafficRemAddr1TypeV2
The type of the first IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.11
h3cIPsecTrafficRemAddr1V2
The first IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is th…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.12
h3cIPsecTrafficRemAddr2TypeV2
The type of the second IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.13
h3cIPsecTrafficRemAddr2V2
The second IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is t…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.126.1.5.1.14
h3cIPsecTrafficRemoPro1V2
The first protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol type…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.15
h3cIPsecTrafficRemoPro2V2
The second protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol typ…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.16
h3cIPsecTrafficRemPort1V2
The first port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer'…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.17
h3cIPsecTrafficRemPort2V2
The second port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer…
Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.18

h3cIPsecTunnelStatByDescripV2Table

table
.1.3.6.1.4.1.2011.10.2.126.1.10 · 1 row entry · 18 columns
Open in standard view 
This table contains IPsec phase-2 tunnel statistics by description.
h3cIPsecTunnelStatByDescripV2Entry entry .1.3.6.1.4.1.2011.10.2.126.1.10.1
An entry of IPsec phase-2 tunnels statistics by description table.
Indexes
No indexes recorded
Column Syntax OID
h3cIPsecPolicyDescripV2
The IPsec policy's description.
OctetString .1.3.6.1.4.1.2011.10.2.126.1.10.1.1
h3cIPsecTunInOctetsByDescripV2
The total number of octets received by IPsec phase-2 tunnels.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.2
h3cIPsecTunInDecompOctetsByDescripV2
The total number of decompressed octets received by IPsec
phase-2 tunnels. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.3
h3cIPsecTunInPktsByDescripV2
The total number of packets received by IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.4
h3cIPsecTunInDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels during receiving process.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.5
h3cIPsecTunInReplayDropPktsByDescripV2
The total number of receive packets dropped by IPsec phase-2 tunnels
due to Anti-Replay processing.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.6
h3cIPsecTunInAuthFailsByDescripV2
The total number of inbound authentication
failures on IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.7
h3cIPsecTunInDecryptFailsByDescripV2
The total number of inbound decryption
failures on IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.8
h3cIPsecTunOutOctetsByDescripV2
The total number of octets sent by IPsec phase-2 tunnels.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.9
h3cIPsecTunOutUncompOctetsByDescripV2
The total number of uncompressed octets sent by IPsec phase-2
tunnels. This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.10
h3cIPsecTunOutPktsByDescripV2
The total number of packets sent by IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.11
h3cIPsecTunOutDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels during sending process.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.12
h3cIPsecTunOutEncryptFailsByDescripV2
The total number of outbound encryption failures
on IPsec Phase-2 Tunnels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.13
h3cIPsecTunNoMemoryDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to no enough memory.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.14
h3cIPsecTunQueueFullDropPktsByDescripV2
The total number of packets dropped by
IPsec phase-2 tunnels due to queue full.
SNMPv2-SMICounter64
Enumerated Values:
1forward
2discard
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.15
h3cIPsecTunInvalidLenDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to invalid length packet.
SNMPv2-SMICounter64
Enumerated Values:
1sentToCPU
2discard
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.16
h3cIPsecTunTooLongDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to packet.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.17
h3cIPsecTunInvalidSaDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to invalid SA.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.126.1.10.1.18