H3C-HPEOC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
46

h3cHPEOCCltVlanManTable

table
.1.3.6.1.4.1.2011.10.2.84.1.2 · 1 row entry · 1 columns
Open in standard view 
This table implements the management of CLT(Coax Line Terminal)
VLAN.
h3cHPEOCCltVlanManEntry entry .1.3.6.1.4.1.2011.10.2.84.1.2.1
The entry of the table h3cHPEOCCltVlanManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cHPEOCCltEthPortType
Control CLT ethernet ports' type,
normal : port which used for normal translation,
debug : port which used for debug.
Enumerationr/w
Enumerated Values:
1normal
2debug
 .1.3.6.1.4.1.2011.10.2.84.1.2.1.1

h3cHPEOCCltSysManTable

table
.1.3.6.1.4.1.2011.10.2.84.1.3 · 1 row entry · 3 columns
Open in standard view 
This table implements the management of CLT(Coax Line Terminal).
h3cHPEOCCltSysManEntry entry .1.3.6.1.4.1.2011.10.2.84.1.3.1
The entry of the table h3cHPEOCCltSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cHPEOCCltDescr
Set the description of CLT.
OctetStringr/w
Constraints:
range: 0-126
 .1.3.6.1.4.1.2011.10.2.84.1.3.1.1
h3cHPEOCCltFwVersion
EOC firmware version. If the object length is
zero, it means the version is unknown.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.84.1.3.1.2
h3cHPEOCCltLinkState
The cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the …
Enumeration
Enumerated Values:
1physicaldown
2linkdown
3linkup
4loopback
 .1.3.6.1.4.1.2011.10.2.84.1.3.1.3

h3cHPEOCCnuSysManTable

table
.1.3.6.1.4.1.2011.10.2.84.1.4 · 1 row entry · 3 columns
Open in standard view 
This table implements the management of CNUs.
h3cHPEOCCnuSysManEntry entry .1.3.6.1.4.1.2011.10.2.84.1.4.1
The entry of the table h3cHPEOCCnuSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cHPEOCCnuBcastControl
Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.84.1.4.1.1
h3cHPEOCCnuAnonymStatus
Anonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.84.1.4.1.2
h3cHPEOCCnuMacLimit
Configure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address e…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.1.4.1.3

h3cHPEOCCableInfoTable

table
.1.3.6.1.4.1.2011.10.2.84.2.1 · 1 row entry · 8 columns
Open in standard view 
This table defines the primary parameters of the
cable information.
h3cHPEOCCableInfoEntry entry .1.3.6.1.4.1.2011.10.2.84.2.1.1
The entry of the table h3cHPEOCCableInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cHPEOCFECErrors
The cable port's FEC bits errors ratio. FEC means the
payload Forward Error Correction. It's a technology of
controlling errors. Packets in transmission is checked by
the receiver, if error occurs, the receiver will …
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.1
h3cHPEOCAvgBitsPerCarrier
The cable port's average bits per carrier.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.2
h3cHPEOCAvgSNRPerCarrier
The cable port's signal noise ratio(SNR) bits per carrier.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.3
h3cHPEOCAvgInPBCRCErrors
The input PB CRC errors on average.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.4
h3cHPEOCInTotalPkts
The total number of packets(including bad packets)
received on this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.5
h3cHPEOCAvgOutPower
The cable port's power sent on average, the unit is db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.6
h3cHPEOCAvgOutPBCRCErrors
The cable port's physical block(PB) cyclic redundancy
check(CRC) errors sent on average.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.7
h3cHPEOCOutTotalPkts
The total count of the packets(including bad packets)
sent on this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.84.2.1.1.8

h3cHPEOCBitPerSymbolTable

table
.1.3.6.1.4.1.2011.10.2.84.2.2 · 1 row entry · 2 columns
Open in standard view 
This table defines the bits per symbol parameters of the
cable line.
h3cHPEOCBitPerSymbolEntry entry .1.3.6.1.4.1.2011.10.2.84.2.2.1
The entry of the table h3cHPEOCBitPerSymbolTable.
Indexes
IF-MIBifIndex h3cHPEOCBitPerSymbolIndex
Column Syntax OID
h3cHPEOCBitPerSymbolIndex
The index of the h3cHPEOCBitPerSymbolTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.2.2.1.1
h3cHPEOCBitPerSymbol
h3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed
frequency. Each 4 bits stand for one value, all the values
picking-up will make up a cable bit map.
OctetString .1.3.6.1.4.1.2011.10.2.84.2.2.1.2

h3cHPEOCTemplateGlobalTable

table
.1.3.6.1.4.1.2011.10.2.84.3.1 · 1 row entry · 10 columns
Open in standard view 
This table defines the global parameters of the
Template information.
h3cHPEOCTemplateGlobalEntry entry .1.3.6.1.4.1.2011.10.2.84.3.1.1
The entry of the table h3cHPEOCTemplateGlobalTable.
Indexes
h3cHPEOCTemplateIndex
Column Syntax OID
h3cHPEOCTemplateIndex
The index of cable Template.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.1
h3cHPEOCTemplateType
The cable Template's type, can not change after create it.
Enumerationr/w
Enumerated Values:
1switch
2gateway
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.2
h3cHPEOCTemplateName
The cable Template's name, it's recommended to set it
uniquely and understandably. Length: 1 to 15 characters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.3
h3cHPEOCTemplateDescr
The cable Template's description. Length: 0 to 63 characters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.4
h3cHPEOCTemplateCnuMaxDownBW
Maximum downstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.5
h3cHPEOCTemplateCnuMaxUpBW
Maximum upstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.6
h3cHPEOCTemplateCnuBcastControl
Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.7
h3cHPEOCTemplateCnuMacLimit
Configure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address e…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.8
h3cHPEOCTemplateCb201VlanEn
Use for Cb201 cnu only.
true(1) - Enable vlan insert function.
false(2) - Disable vlan insert function.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.9
h3cHPEOCTemplateRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.84.3.1.1.10

h3cHPEOCTemplateSwitchTable

table
.1.3.6.1.4.1.2011.10.2.84.3.2 · 1 row entry · 11 columns
Open in standard view 
This table defines the port parameters of the
switch type cnu. it's not affect on the type of gateway Template.
h3cHPEOCTemplateSwitchEntry entry .1.3.6.1.4.1.2011.10.2.84.3.2.1
The entry of the table h3cHPEOCTemplateSwitchTable.
Indexes
h3cHPEOCTemplateIndex h3cHPEOCTemplateUniIndex
Column Syntax OID
h3cHPEOCTemplateUniIndex
The index value which uniquely identifies the FE
interface of the CNU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.1
h3cHPEOCTemplateUniSpeed
User network interface speed.
Enumerationr/w
Enumerated Values:
1auto
10s10M
100s100M
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.2
h3cHPEOCTemplateUniDuplex
User network interface mode.
Enumerationr/w
Enumerated Values:
1full
2half
3auto
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.3
h3cHPEOCTemplateUniPriority
The default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.4
h3cHPEOCTemplateUniFlowControl
Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.5
h3cHPEOCTemplateUniUpLineRate
The max speed upload in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.6
h3cHPEOCTemplateUniDownLineRate
The max speed download in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.7
h3cHPEOCTemplateUniAdminStatus
Control if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.8
h3cHPEOCTemplateUniVLANType
port vlan types.
hybrid (3) port can carry multiple VLANs.
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.9
h3cHPEOCTemplateUniPvid
The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.10
h3cHPEOCTemplateUniVlanTag
VLAN is set tagged or untagged.
Enumerationr/w
Enumerated Values:
1tagged
2untagged
 .1.3.6.1.4.1.2011.10.2.84.3.2.1.11

h3cHPEOCCnuAccessTable

table
.1.3.6.1.4.1.2011.10.2.84.4.1 · 1 row entry · 8 columns
Open in standard view 
This table defines the global parameters of the
cnu type permitting to access.
h3cHPEOCCnuAccessEntry entry .1.3.6.1.4.1.2011.10.2.84.4.1.1
The entry of the table h3cHPEOCCnuAccessTable.
Indexes
h3cHPEOCCnuAccessIndex
Column Syntax OID
h3cHPEOCCnuAccessIndex
The index value which uniquely identifies the
manuinfo of the CNU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.1
h3cHPEOCCnuHFID
The Cnu's HFID. Every type Cnu has it's unique HFID.
Length: 1 to 64 characters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.2
h3cHPEOCManuInfo
The Cnu's manufactory infofamiont.
Length: 0 to 63 characters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.3
h3cHPEOCCnuType
The Cnu's function type.
Enumerationr/w
Enumerated Values:
1switch
2gateway
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.4
h3cHPEOCCnuSwitchType
The Cnu's switch chip type. It's useless for gataway type cnu.
Enumerationr/w
Enumerated Values:
1rtl8306e
2ar8236
3mv6061
4mv6031
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.5
h3cHPEOCCnuUniNum
Uni number of the Cnu. It's useless for gataway type cnu.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.6
h3cHPEOCCnuPhy2Uni
Reflection from phy port to uni port of the cnu.
It's useless for gataway type cnu.
For example, phy port 0,1,2,3 is reflect to uni port
1,2,3,4, then the value of this mib is {0,1,2,3}
OctetStringr/w .1.3.6.1.4.1.2011.10.2.84.4.1.1.7
h3cHPEOCCnuAccessRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.10.2.84.4.1.1.8