H3C-DHCPSNOOP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
8

h3cDhcpSnoopTable

table
.1.3.6.1.4.1.2011.10.2.36.1.2 · 1 row entry · 5 columns
Open in standard view 
The table containing information of DHCP clients listened by
DHCP snooping and it's enabled or disabled by setting
h3cDhcpSnoopEnable node.
h3cDhcpSnoopEntry entry .1.3.6.1.4.1.2011.10.2.36.1.2.1
An entry containing information of DHCP clients.
Indexes
h3cDhcpSnoopClientIpAddressType h3cDhcpSnoopClientIpAddress
Column Syntax OID
h3cDhcpSnoopClientIpAddressType
DHCP clients' IP addresses type (IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.36.1.2.1.1
h3cDhcpSnoopClientIpAddress
DHCP clients' IP addresses collected by DHCP snooping.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.36.1.2.1.2
h3cDhcpSnoopClientMacAddress
DHCP clients' MAC addresses collected by DHCP snooping.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.10.2.36.1.2.1.3
h3cDhcpSnoopClientProperty
Method of getting IP addresses collected by DHCP snooping.
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.2011.10.2.36.1.2.1.4
h3cDhcpSnoopClientUnitNum
IRF (Intelligent Resilient Fabric) unit number via whom the clients
get their IP addresses. The value 0 means this device does not support IRF.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.36.1.2.1.5

h3cDhcpSnoopTrustTable

table
.1.3.6.1.4.1.2011.10.2.36.1.3 · 1 row entry · 1 columns
Open in standard view 
A table is used to configure and monitor port trusted status.
h3cDhcpSnoopTrustEntry entry .1.3.6.1.4.1.2011.10.2.36.1.3.1
An entry containing information about trusted status of ports.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cDhcpSnoopTrustStatus
Trusted status of current port which supports both get and
set operation.
Enumerationr/w
Enumerated Values:
0untrusted
1trusted
 .1.3.6.1.4.1.2011.10.2.36.1.3.1.1

h3cDhcpSnoopVlanTable

table
.1.3.6.1.4.1.2011.10.2.36.1.4 · 1 row entry · 2 columns
Open in standard view 
A table is used to configure and monitor DHCP Snooping
status of VLANs.
h3cDhcpSnoopVlanEntry entry .1.3.6.1.4.1.2011.10.2.36.1.4.1
The entry information about h3cDhcpSnoopVlanTable.
Indexes
h3cDhcpSnoopVlanIndex
Column Syntax OID
h3cDhcpSnoopVlanIndex
Current VLAN index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.10.2.36.1.4.1.1
h3cDhcpSnoopVlanEnable
DHCP Snooping status of current VLAN.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.36.1.4.1.2