GSWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

nbsPortsContTable

table mandatory

.1.3.6.1.4.1.629.2.5.1 · 1 row entry · 9 columns

Open in standard view

A list of the port counters entries

nbsPortsContEntry entry .1.3.6.1.4.1.629.2.5.1.1

Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex1

Column Syntax OID

nbsPortIndex1 mandatory

The port# from 1 to nbsNPorts1

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.5.1.1.1

nbsPortEnable mandatory

Port Enable.
1 - Port is enabled
2 - Port is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.629.2.5.1.1.2

nbsPortDuplex mandatory

Half/Full Duplex.
1 - Port works in Half-Duplex mode
2 - Port works in Full-Duplex mode

Enumerationr/w

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.629.2.5.1.1.3

nbsPortMonitor mandatory

Monitoring Mode.
1 - Port works in normal mode
2 - Port is set as Sniffer port (monitor mode) were all recived
and transmit packats from all ports are sent to the Sniffer port

Enumerationr/w

Enumerated Values:

1	normal
2	sniffer

.1.3.6.1.4.1.629.2.5.1.1.5

nbsPortPolDetection mandatory

Auto-Polarity Disable.
Enable/Disable Auto-Polarity detection function
1 - Disable
2 - Enable

Enumerationr/w

Enumerated Values:

1	enable
2	disabel

.1.3.6.1.4.1.629.2.5.1.1.6

nbsPortBroadcast mandatory

Filter Broadcast.
1 - Broadcast packats are forwarded to all ports.
2 - The Switch-G discards Broadcast packats

Enumerationr/w

Enumerated Values:

1	forward
2	discard

.1.3.6.1.4.1.629.2.5.1.1.7

nbsPortForwardUnk mandatory

Forward Unknown.
1 - Unknown packats are forwarded.
2 - The Switch-G does not forward unknown packats
to this port

Enumerationr/w

Enumerated Values:

1	forward
2	discard

.1.3.6.1.4.1.629.2.5.1.1.8

nbsPortSpaning mandatory

Spaning Tree Enable.
Meaniningful only when Spaning Tree for the switch is set
(nbsSpanningTree) is set.
1 - All packets are accepted.
2 - The Switch-G discards all incoming/outgoing packets
except for BPDU packets

Enumerationr/w

Enumerated Values:

1	accept
2	discard

.1.3.6.1.4.1.629.2.5.1.1.9

nbsPortSpeed mandatory

Ports Speed.
Meaningfull only for ports that support both 10 and 100
MBps speeds.
1 - Only for Uplink Ports: Switch-G - Ports ## 27,28
Switch-G - Ports ## 17,18
2 - After reset the port will operate in 10 MBp…

Enumerationr/w

Enumerated Values:

1	none
2	s10MBps
3	s100MBps
4	s1000MBps
5	s10000MBps

.1.3.6.1.4.1.629.2.5.1.1.10

nbsPortsStatTable

table mandatory

.1.3.6.1.4.1.629.2.6.1 · 1 row entry · 4 columns

Open in standard view

A list of all the port status objects

nbsPortsStatEntry entry .1.3.6.1.4.1.629.2.6.1.1

The ports status information.
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex

Column Syntax OID

nbsPortIndex mandatory

The port# from 1 to nbsNPorts1

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.6.1.1.1

nbsPortType mandatory

Port Type

Enumeration

Enumerated Values:

1	empty
2	normal
3	fastCopper
4	fastFiber
5	slowFiber
6	gigaCopper

.1.3.6.1.4.1.629.2.6.1.1.2

nbsPartition mandatory

Ports Partition.
Indicates the ports Partition status.
1 - No Partition (Normal mode)
2 - Partition

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.629.2.6.1.1.3

nbsLinkTest mandatory

Ports Link Test Fail.
Indicates the ports Link Test status
1 - Link Test Pass
2 - Link Test Fail

Enumeration

Enumerated Values:

1	pass
2	fail

.1.3.6.1.4.1.629.2.6.1.1.4

nbsPortsCountTable

table mandatory

.1.3.6.1.4.1.629.2.7.1 · 1 row entry · 16 columns

Open in standard view

A list of the port counters entries

nbsPortsCountEntry entry .1.3.6.1.4.1.629.2.7.1.1

Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex2

Column	Syntax	OID
nbsPortIndex2 mandatory The port# from 1 to nbsNPorts1	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.7.1.1.1`
nbsPortByteRec mandatory Good Bytes Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.2`
nbsPortMulByteRec mandatory Good Multicast Bytes Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.3`
nbsPortBroadByteRec mandatory Good Broadcast Bytes Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.4`
nbsPortByteSent mandatory Good Bytes Sent	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.5`
nbsPortFramesRec mandatory Good Frames Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.6`
nbsPortMulFramesRec mandatory Good Multicast Frames Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.7`
nbsPortBroadFramesRec mandatory Broadcast Frames Recived	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.8`
nbsPortFramesSent mandatory Frames Sent	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.9`
nbsPortCollisions mandatory Recive and Transmit Collision	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.10`
nbsPortLateColl mandatory Recive and Transmit Late Collision	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.11`
nbsPortCRCAligErr mandatory Recive CRC or Alignment Error	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.12`
nbsPortFramesShort mandatory Recive Frames	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.13`
nbsPortFrameLong mandatory Recive Frames > 1518 bytes with Good CRC	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.14`
nbsPortJabber mandatory Recive Frames > 1518 bytes with Bad CRC	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.15`
nbsPortBadByteRec mandatory Bad Bytes Recived. Bytes with CRC errors and frame too long	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.16`

nbsMACAddrTable

table mandatory

.1.3.6.1.4.1.629.2.8.1 · 1 row entry · 5 columns

Open in standard view

The DRAM address table contains all the MAC addresses
up to 8K records.

nbsMACAddrEntry entry .1.3.6.1.4.1.629.2.8.1.1

The entries (records)

Indexes

nbsAddrIndex

Column Syntax OID

nbsAddrIndex mandatory

An index from 1 to 8K. * (number of devices+1)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.8.1.1.1

nbsMACAddress mandatory

The MAC Address where the packet came from

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.629.2.8.1.1.3

nbsAddrPort mandatory

The source port in this device

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.8.1.1.4

nbsAddrStatic mandatory

Static indecation bit in the MAC Address entry

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.629.2.8.1.1.5

nbsAddrForwardTo mandatory

This indicates whether to forward frames destined
to this MAC address to all ports or only to the
destination port

Enumerationr/w

Enumerated Values:

1	destination-port
2	all-ports

.1.3.6.1.4.1.629.2.8.1.1.6

nbsCardsTable

table mandatory

.1.3.6.1.4.1.629.2.9.1 · 1 row entry · 2 columns

Open in standard view

define the Cards' Types 
(for NH5500 and other GSWITCH HUBS..).

nbsCardsEntry entry .1.3.6.1.4.1.629.2.9.1.1

The entries (records)

Indexes

nbsAddrIndex

Column Syntax OID

nbsCardIndex mandatory

The slot#. An index from 1 to The number of slots.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.9.1.1.1

nbsCardType mandatory

The Card's type:
copper20Ethernet10or100Base (2) - Slot including 20 fast copper 10/100 MBps Ports;
copper40Ethernet10Base (3) - Slot including 40 normal copper 10 MBps Ports;
fibre10Ethernet100Base (6) - Sl…

Enumeration

Enumerated Values:

1	emptySlot
2	copper20Ethernet10or100Base
3	copper40Ethernet10Base
4	powerSupplyError
5	powerSupplyOK
6	fibre10Ethernet100Base
7	fansUnitError
8	fansUnitOK
9	universal

.1.3.6.1.4.1.629.2.9.1.1.2

nbsPALPortsTable

table mandatory

.1.3.6.1.4.1.629.2.12.1 · 1 row entry · 2 columns

Open in standard view

Table contain data only for
the existing PAL modules ports.

nbsPALPortsEntry entry .1.3.6.1.4.1.629.2.12.1.1

The PAL Optic Power Ports status.

Indexes

nbsPALPortIndex

Column	Syntax	OID
nbsPALPortIndex mandatory The number of the real existing PAL port. (the same as [ifIndex] in the MIB-II).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.12.1.1.1`
nbsPALPortOpticPower mandatory PAL Port Optic Power status. (interval: 0 - 15)	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.12.1.1.2`