GSM7324-ROUTING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
45

agentSwitchArpTable

table
.1.3.6.1.4.1.4526.1.7.2.1.10 · 1 row entry · 6 columns
Open in standard view 
This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.
agentSwitchArpEntry entry .1.3.6.1.4.1.4526.1.7.2.1.10.1
Indexes
agentSwitchArpIpAddress
Column Syntax OID
agentSwitchArpAge
This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.1
agentSwitchArpIpAddress
The IP Address assigned to each interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.2
agentSwitchArpMacAddress
The hardware MAX Address that each interface maps to.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.3
agentSwitchArpInterface
The Associated IfIndex which identified the ARP Entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.4
agentSwitchArpType
The type of ARP entry.
Enumeration
Enumerated Values:
1local
2gateway
3static
4dynamic
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.5
agentSwitchArpStatus
The status of this ARP entry. Setting this object destroy will remove the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4526.1.7.2.1.10.1.6

agentSwitchIpInterfaceTable

table
.1.3.6.1.4.1.4526.1.7.2.2.3 · 1 row entry · 5 columns
Open in standard view
agentSwitchIpInterfaceEntry entry .1.3.6.1.4.1.4526.1.7.2.2.3.1
Indexes
agentSwitchIpInterfaceIfIndex
Column Syntax OID
agentSwitchIpInterfaceIfIndex
The IfIndex associated with this instance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.2.3.1.1
agentSwitchIpInterfaceIpAddress
The IpAddress assigned to this interface. When setting this value,
the value of agentSwitchIpInterfaceNetMask must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.1.7.2.2.3.1.2
agentSwitchIpInterfaceNetMask
The NetMask assigned to this interface. When setting this value, the
value of agentSwitchIpInterfaceIpAddress must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.1.7.2.2.3.1.3
agentSwitchIpInterfaceClearIp
Sets the interfaces IpAddress and NetMask back to 0.0.0.0
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.1.7.2.2.3.1.4
agentSwitchIpInterfaceRoutingMode
Enables or disables routing for this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.1.7.2.2.3.1.5

agentSwitchIpRouterDiscoveryTable

table
.1.3.6.1.4.1.4526.1.7.2.2.4 · 1 row entry · 7 columns
Open in standard view 
There is no global administrative flag for router discovery.  The global
routing flag (agentSwitchIpRoutingMode) will be used for this purpose.  If routing
is disabled, router discovery is disabled as well.
agentSwitchIpRouterDiscoveryEntry entry .1.3.6.1.4.1.4526.1.7.2.2.4.1
Indexes
agentSwitchIpRouterDiscoveryIfIndex
Column Syntax OID
agentSwitchIpRouterDiscoveryIfIndex
Interface Number to configure Router Discovery on.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.1
agentSwitchIpRouterDiscoveryAdvertiseMode
Enable or disable router discovery on the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.2
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
Maximum time allowed between sending router advertisements
from the interface.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.3
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
Minimum time allowed between sending router advertisements from the interface.

This value must be less than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.4
agentSwitchIpRouterDiscoveryAdvertisementLifetime
Value of lifetime field of router advertsisement sent from
the interface.

This value must be greater than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.5
agentSwitchIpRouterDiscoveryPreferenceLevel
Preferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.6
agentSwitchIpRouterDiscoveryAdvertisementAddress
Address used when sending router advertisements from the interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.1.7.2.2.4.1.7

agentSwitchIpVlanTable

table
.1.3.6.1.4.1.4526.1.7.2.2.5 · 1 row entry · 3 columns
Open in standard view
agentSwitchIpVlanEntry entry .1.3.6.1.4.1.4526.1.7.2.2.5.1
A Static VLAN for which routing can be enabled/disabled
Indexes
agentSwitchIpVlanId
Column Syntax OID
agentSwitchIpVlanId
The Vlan's Id.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.2.5.1.1
agentSwitchIpVlanIfIndex
The IfIndex associated with this VLAN.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.2.5.1.2
agentSwitchIpVlanRoutingStatus
Status of Routing mode per Vlan.
active(1) - Vlan is enabled for routing
createAndGo(4) - Adds Vlan entry for routing
destroy(6) - Removes Vlan from routing
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4526.1.7.2.2.5.1.3

agentRipRouteRedistTable

table
.1.3.6.1.4.1.4526.1.7.2.3.8 · 1 row entry · 11 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected.
agentRipRouteRedistEntry entry .1.3.6.1.4.1.4526.1.7.2.3.8.1
Indexes
agentRipRouteRedistSource
Column Syntax OID
agentRipRouteRedistSource
Source route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3ospf
4bgp
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.1
agentRipRouteRedistMode
User enabels/disables route-redistribution for a particular source
protocol.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.2
agentRipRouteRedistMetric
Metric used for redistributing a particular source protocol route
into RIP.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.3
agentRipRouteRedistMetricConfigured
Flag to determine whether RIP redistribute-metric is configured or not.
r/w .1.3.6.1.4.1.4526.1.7.2.3.8.1.4
agentRipRouteRedistMatchInternal
If this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.5
agentRipRouteRedistMatchExternal1
If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.6
agentRipRouteRedistMatchExternal2
If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.7
agentRipRouteRedistMatchNSSAExternal1
If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.8
agentRipRouteRedistMatchNSSAExternal2
If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.9
agentRipRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
Unsigned32r/w
Constraints:
range: 1-199
 .1.3.6.1.4.1.4526.1.7.2.3.8.1.10
agentRipRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
r/w .1.3.6.1.4.1.4526.1.7.2.3.8.1.11

agentRip2IfConfTable

table
.1.3.6.1.4.1.4526.1.7.2.3.9 · 1 row entry · 1 columns
Open in standard view 
A list of subnets which require separate
configuration in RIP.  Augments rip2IfConfTable
 in the RIPv2-MIB.
agentRip2IfConfEntry entry .1.3.6.1.4.1.4526.1.7.2.3.9.1
A Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentRip2IfConfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4526.1.7.2.3.9.1.1

agentOspfRouteRedistTable

table
.1.3.6.1.4.1.4526.1.7.2.4.8 · 1 row entry · 9 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected.
agentOspfRouteRedistEntry entry .1.3.6.1.4.1.4526.1.7.2.4.8.1
Indexes
agentOspfRouteRedistSource
Column Syntax OID
agentOspfRouteRedistSource
Source protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3rip
4bgp
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.1
agentOspfRouteRedistMode
User enabels/disables route-redistribution for a particular source
protocol.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.2
agentOspfRouteRedistMetric
Metric used for redistributing a particular source protocol route
into OSPF.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.3
agentOspfRouteRedistMetricConfigured
Flag to determine whether OSPF redistribute-metric is configured or not.
r/w .1.3.6.1.4.1.4526.1.7.2.4.8.1.4
agentOspfRouteRedistMetricType
Metric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).
Enumerationr/w
Enumerated Values:
1externalType1
2externalType2
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.5
agentOspfRouteRedistTag
It specifies the tag field in routes redistributed by OSPF.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.6
agentOspfRouteRedistSubnets
If this value is false, then OSPF will not redistribute subnetted routes.
r/w .1.3.6.1.4.1.4526.1.7.2.4.8.1.7
agentOspfRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
Unsigned32r/w
Constraints:
range: 1-199
 .1.3.6.1.4.1.4526.1.7.2.4.8.1.8
agentOspfRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
r/w .1.3.6.1.4.1.4526.1.7.2.4.8.1.9

agentOspfIfTable

table
.1.3.6.1.4.1.4526.1.7.2.4.9 · 1 row entry · 1 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.  Augments 
 ospfIfTable from the OSPF-MIB.
agentOspfIfEntry entry .1.3.6.1.4.1.4526.1.7.2.4.9.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentOspfIfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4526.1.7.2.4.9.1.1

agentOspfVirtIfTable

table
.1.3.6.1.4.1.4526.1.7.2.4.10 · 1 row entry · 1 columns
Open in standard view 
Information about this router's virtual inter-
faces.  Augments ospfVirtIfTable from the OSPF-MIB.
agentOspfVirtIfEntry entry .1.3.6.1.4.1.4526.1.7.2.4.10.1
Information about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentOspfVirtIfAuthKeyId
The identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4526.1.7.2.4.10.1.1

agentOspfAreaTable

table
.1.3.6.1.4.1.4526.1.7.2.4.12 · 1 row entry · 1 columns
Open in standard view 
Information describing the additional configured 
parameters and cumulative statistics of the router's
attached areas.
agentOspfAreaEntry entry .1.3.6.1.4.1.4526.1.7.2.4.12.1
Information describing the additional configured
parameters and cumulative statistics of the router's
attached areas.
Indexes
No indexes recorded
Column Syntax OID
agentOspfAuthType
The authentication type specified for an area.
Additional authentication types may be assigned
locally on a per Area basis.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.1.7.2.4.12.1.2