G9981-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
35
g9981PortConfTable
table.1.3.6.1.2.1.208.1.1.1
·
1 row entry
·
3 columns
Table for configuration of G.Bond/ATM ports. Entries in this table MUST be maintained in a persistent manner.
An entry in the G.Bond/ATM Port Configuration table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note t…
Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note t…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
g9981PortConfUpDiffDelayTolerance
A maximum tolerated upstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports. It is irrelevant for the GBS-R ports -- an att… |
millisecondsUnsigned32r/w Constraints: range: 0-2047 |
.1.3.6.1.2.1.208.1.1.1.1.1 |
||||
|
g9981PortConfDnDiffDelayTolerance
A maximum tolerated downstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports. It is irrelevant for the GBS-R ports -- an a… |
millisecondsUnsigned32r/w Constraints: range: 0-2047 |
.1.3.6.1.2.1.208.1.1.1.1.2 |
||||
|
g9981PortConfDiffDelayToleranceExceededEnable
Indicates whether g9981UpDiffDelayToleranceExceeded and
g9981DnDiffDelayToleranceExceeded notifications should be generated for G.Bond/ATM port. A value of true(1) indicates that the notifications are ena… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.208.1.1.1.1.3 |
g9981PortStatTable
table.1.3.6.1.2.1.208.1.1.2
·
1 row entry
·
4 columns
This table provides overall status information of G.Bond/ATM
ports, complementing the generic status information from the
ifTable of the IF-MIB and the gBondFltStatus of the GBOND-MIB.
Additional status information about connected BCEs is available
from the relevant line MIBs.
This table contains live data from the equipment. As such, it
is NOT persistent.
An entry in the G.Bond/ATM Port Status table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by the ifIndex.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by the ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
g9981PortStatRxLostCells
The number of lost ATM cells detected by the G.Bond/ATM port
in the receive direction (e.g., upstream direction for a GBS-C port). Discontinuities in the value of this counter can occur at re-initializati… |
cellsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.208.1.1.2.1.1 |
|
g9981PortStatTxLostCells
The number of lost ATM cells detected by the peer G.Bond/ATM
port in the receive direction, i.e., downstream direction for a GBS-C port. This object is irrelevant for the GBS-R ports -- an attempt to read… |
cellsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.208.1.1.2.1.2 |
|
g9981PortStatMaxUpDiffDelay
Current maximum upstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-only for the GBS-C ports. It is irrelevant for th… |
0.1 msSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.208.1.1.2.1.3 |
|
g9981PortStatMaxDnDiffDelay
Current maximum downstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-only for the GBS-C ports. It is irrelevant for … |
0.1 msSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.208.1.1.2.1.4 |
g9981PortPmCurTable
table.1.3.6.1.2.1.208.1.1.3.1
·
1 row entry
·
14 columns
This table contains current Performance Monitoring information for a G.Bond/ATM port. This table contains live data from the equipment and as such is NOT persistent.
An entry in the G.Bond/ATM Port PM table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
g9981PortPmCur15MinValidIntervals
A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless t… |
HC-PerfHist-TC-MIBHCPerfValidIntervals Textual Convention: HC-PerfHist-TC-MIBHCPerfValidIntervals Integer32Type Constraints: range: 0..96 |
.1.3.6.1.2.1.208.1.1.3.1.1.1 |
|
g9981PortPmCur15MinInvalidIntervals
A read-only number of 15-minute intervals for which the
performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available. T… |
HC-PerfHist-TC-MIBHCPerfInvalidIntervals Textual Convention: HC-PerfHist-TC-MIBHCPerfInvalidIntervals Integer32Type Constraints: range: 0..96 |
.1.3.6.1.2.1.208.1.1.3.1.1.2 |
|
g9981PortPmCur15MinTimeElapsed
A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attribute aGroupPerfCurr15MinTimeElapsed. |
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32Type Constraints: range: 0..86399 |
.1.3.6.1.2.1.208.1.1.3.1.1.3 |
|
g9981PortPmCur15MinRxLostCells
A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g., the GBS-C) in the receive direction, during the current 15-minute performance history interval. Note that the total number of lost … |
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.4 |
|
g9981PortPmCur15MinTxLostCells
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 15-minute performance history interval. Note that the total number of lost AT… |
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.5 |
|
g9981PortPmCur15MinUpDiffDelay
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 15-minute performance interval. Note that th… |
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.6 |
|
g9981PortPmCur15MinDnDiffDelay
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C (as perceived by the GBS-R), measured in units of 0.1 ms, during the current 15-minute performance history… |
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.7 |
|
g9981PortPmCur1DayValidIntervals
A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation, unless the measurement was (re)st… |
daysUnsigned32 Constraints: range: 0-7 |
.1.3.6.1.2.1.208.1.1.3.1.1.8 |
|
g9981PortPmCur1DayInvalidIntervals
A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero, except in cases where the data for some intervals are not available. |
daysUnsigned32 Constraints: range: 0-7 |
.1.3.6.1.2.1.208.1.1.3.1.1.9 |
|
g9981PortPmCur1DayTimeElapsed
A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval. |
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32Type Constraints: range: 0..86399 |
.1.3.6.1.2.1.208.1.1.3.1.1.10 |
|
g9981PortPmCur1DayRxLostCells
A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g., the GBS-C) during the current 1-day performance interval. This object is inhibited during Severely Errored Seconds (SES) and Unav… |
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.11 |
|
g9981PortPmCur1DayTxLostCells
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 1-day performance history interval. This object is inhibited during Unavailab… |
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.12 |
|
g9981PortPmCur1DayUpDiffDelay
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 1-day performance interval. This object is i… |
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.13 |
|
g9981PortPmCur1DayDnDiffDelay
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 1-day performance interval. This object is… |
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.1.1.14 |
g9981PortPm15MinTable
table.1.3.6.1.2.1.208.1.1.3.2
·
1 row entry
·
7 columns
This table contains historical 15-minute buckets of Performance Monitoring information for a G.Bond/ATM port (a row for each 15-minute interval, up to 96 intervals). Entries in this table MUST be maintained in a persistent manner.
An entry in the G.Bond/ATM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a
G.Bond/ATM port, indexed by the ifIndex, collected during a
particular 15-minute interv…
Each entry represents Performance Monitoring data for a
G.Bond/ATM port, indexed by the ifIndex, collected during a
particular 15-minute interv…
Indexes
IF-MIBifIndex g9981PortPm15MinIntervalIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
g9981PortPm15MinIntervalIndex
Performance data interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf15MinInte… |
Unsigned32 Constraints: range: 1-96 |
.1.3.6.1.2.1.208.1.1.3.2.1.1 |
||||
|
g9981PortPm15MinIntervalMoniTime
A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the interval duration (900 seconds), except in a situation where performance data could not be collect… |
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32Type Constraints: range: 0..86399 |
.1.3.6.1.2.1.208.1.1.3.2.1.2 |
||||
|
g9981PortPm15MinIntervalRxLostCells
A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g., the GBS-C) in the receive direction, during the 15-minute performance history interval. Note that the total number of lost ATM cell… |
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.2.1.3 |
||||
|
g9981PortPm15MinIntervalTxLostCells
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the 15-minute performance history interval. Note that the total number of lost ATM cells … |
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.2.1.4 |
||||
|
g9981PortPm15MinIntervalUpDiffDelay
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS, measured in units of 0.1 ms, during the 15-minute performance history interval. Note that the … |
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.2.1.5 |
||||
|
g9981PortPm15MinIntervalDnDiffDelay
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS, as perceived by its peer port, measured in units of 0.1 ms, during the 15-minute performance history interv… |
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.2.1.6 |
||||
|
g9981PortPm15MinIntervalValid
A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU MUST NOT produce… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.208.1.1.3.2.1.7 |
g9981PortPm1DayTable
table.1.3.6.1.2.1.208.1.1.3.3
·
1 row entry
·
7 columns
This table contains historical 1-day buckets of Performance Monitoring information for a G.Bond/ATM port (a row for each 1-day interval, up to 7 intervals). Entries in this table MUST be maintained in a persistent manner.
An entry in the G.Bond/ATM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9981Por…
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9981Por…
Indexes
IF-MIBifIndex g9981PortPm1DayIntervalIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
g9981PortPm1DayIntervalIndex
Performance data interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago. Intervals 2..7 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf1DayInterva… |
Unsigned32 Constraints: range: 1-7 |
.1.3.6.1.2.1.208.1.1.3.3.1.1 |
||||
|
g9981PortPm1DayIntervalMoniTime
A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for a… |
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32Type Constraints: range: 0..86399 |
.1.3.6.1.2.1.208.1.1.3.3.1.2 |
||||
|
g9981PortPm1DayIntervalRxLostCells
A count of lost ATM cells detected by the G.Bond/ATM port
(e.g., the GBS-C) during the 1-day performance history interval. This object is inhibited during Severely Errored Seconds (SES) and Unavailable Se… |
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.3.1.3 |
||||
|
g9981PortPm1DayIntervalTxLostCells
A count of lost ATM cells detected by the peer G.Bond/ATM port
(e.g., by the GBS-R for the GBS-C) during the 1-day performance history interval. This object is inhibited during Unavailable Seconds (UAS). |
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.3.1.4 |
||||
|
g9981PortPm1DayIntervalUpDiffDelay
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day performance history interval. This object is i… |
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.3.1.5 |
||||
|
g9981PortPm1DayIntervalDnDiffDelay
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day performance history interval. This object is… |
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64 |
.1.3.6.1.2.1.208.1.1.3.3.1.6 |
||||
|
g9981PortPm1DayIntervalValid
A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU MUST NOT produce… |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.208.1.1.3.3.1.7 |