G6-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
57

vlanIdConfigTable

table
.1.3.6.1.4.1.3181.10.6.2.82.2 · 1 row entry · 7 columns
Open in standard view 
This section defines some default VLAN settings.
vlanIdConfigEntry entry .1.3.6.1.4.1.3181.10.6.2.82.2.1
Indexes
vlanIdConfigIndex
Column Syntax OID
vlanIdConfigIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.1
vlanIdConfigManagementVlanId
VLAN ID for internal management port. Packets sent by the management agent are tagged with this VLAN ID,
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.2
vlanIdConfigManagementPriority
VLAN Priority for internal management port. Packets sent by the internal management agent are tagged with this priority value.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.3
vlanIdConfigVoiceVlanId
Voice VLAN ID. Special VLAN for IP phones.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.4
vlanIdConfigRstpVlanId
RSTP VLAN ID. When using single instance Spanning Tree (STP or RSTP) in combination with VLANs, all spanning tree messages are tagged with this VLAN ID.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.5
vlanIdConfigUnauthorizedVlanId
When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.6
vlanIdConfigSmartofficeVlanId
VLAN ID used for SmartOffice control traffic between director and controllers. Also used by the SmartOffice GUI.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.2.1.7

portConfigTable

table
.1.3.6.1.4.1.3181.10.6.2.82.3 · 1 row entry · 9 columns
Open in standard view 
These settings define the default VLANs per port and defines how untagged data are treated.
portConfigEntry entry .1.3.6.1.4.1.3181.10.6.2.82.3.1
Indexes
portConfigPortIndex
Column Syntax OID
portConfigPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.1
portConfigVlanMode
Defines how the VLAN tag of incoming and outgoing packets shall be handled on port.
Enumerationr/w
Enumerated Values:
0access
1hybrid
2trunk
3qInQCustomer
4qInQProvider
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.2
portConfigDefaultVlanId
Default VLAN ID for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.3
portConfigForceDefaultVlanId
When enabled, incoming packets with existing VLAN tag are overwritten with the default port VLAN ID.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.4
portConfigDefaultPriority
Default priority value for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.5
portConfigPriorityOverride
When enabled, incoming packets with existing VLAN tag are overwritten with the default priority value.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.6
portConfigUnauthorizedVlanId
When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN. When set to 0 the global vlan_id_config.unauthorized_vlan_id parameter applies. Use this parameter to set an independend p…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.7
portConfigFallbackVlanId
When using port access control with dynamic VLANs and a RADIUS server, the fallback vlan is assigned when the RADIUS server is unavailable. If this parameter is set to 0 the unauthorized vlan is used instead. If this is…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.8
portConfigQInQEthertype
Ethertype configuration only applies for vlan_mode Q_IN_Q.
Enumerationr/w
Enumerated Values:
0ox88a8
1ox9100
2ox9200
3ox8100
 .1.3.6.1.4.1.3181.10.6.2.82.3.1.9

filterConfigTable

table
.1.3.6.1.4.1.3181.10.6.2.82.4 · 1 row entry · 10 columns
Open in standard view 
Defines the used VLANs and their associated ports.
filterConfigEntry entry .1.3.6.1.4.1.3181.10.6.2.82.4.1
Indexes
filterConfigIndex
Column Syntax OID
filterConfigIndex
Automatically generated
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.1
filterConfigVlanId
Defines filter table entry for this VLAN ID. This is the key value for the table. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.2
filterConfigEntryMode
When disabled, filtering for this VLAN ID is disabled without deleting the table entry. This can be used for testing and configuration.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.3
filterConfigAlias
User-definable name string for VLAN.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.4
filterConfigMstpGroup
All filter entries with the same mstp_group number will share an MSTP instance. A group may consist of one or many vlan entries. A value of 0 indicates that MSTP is not used for this VLAN.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.5
filterConfigFabricAttachISid
This parameter defines the VLAN to I-SID binding when the shortest path bridging (SPB) fabric attach feature is used.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.6
filterConfigPortMembers
Defines port memberships for VLAN. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.7
filterConfigManagementMembers
Defines the port membership for the internal management port(s).
Enumerationr/w
Enumerated Values:
0none
1cpu1
2cpu2
3all
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.8
filterConfigPriorityOverride
When enabled the priority value of packets tagged with this VLAN is overwritten with the new_priority value.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.9
filterConfigNewPriority
VLAN priority value when priority_override is enabled.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.3181.10.6.2.82.4.1.10

mvrpPortConfigTable

table
.1.3.6.1.4.1.3181.10.6.2.82.6 · 1 row entry · 6 columns
Open in standard view 
Configuration parameter concerning the port specific MVRP setttings.
mvrpPortConfigEntry entry .1.3.6.1.4.1.3181.10.6.2.82.6.1
Indexes
mvrpPortConfigPortIndex
Column Syntax OID
mvrpPortConfigPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.1
mvrpPortConfigEnableMvrp
Enable MVRP (Multiple VLAN Reservation Protocol) on this port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.2
mvrpPortConfigRegistrationMode
Configuration of the MVRP registration mode.
Enumerationr/w
Enumerated Values:
0normal
1fixed
2forbidden
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.3
mvrpPortConfigJoinTimer
Number of milliseconds that the interface must wait before sending MVRP PDUs.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.4
mvrpPortConfigLeaveTimer
Number of milliseconds that the switch retains a VLAN in the Leave state before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.5
mvrpPortConfigLeaveallTimer
Number of milliseconds between the sending of Leave All messages.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.6.1.6

fabricAttachPortConfigTable

table
.1.3.6.1.4.1.3181.10.6.2.82.7 · 1 row entry · 5 columns
Open in standard view 
Configuration parameter controling the fabric attach feature. Each port can be configured individually.
fabricAttachPortConfigEntry entry .1.3.6.1.4.1.3181.10.6.2.82.7.1
Indexes
fabricAttachPortConfigPortIndex
Column Syntax OID
fabricAttachPortConfigPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.82.7.1.1
fabricAttachPortConfigEnableFabricAttach
Shortest path bridging (SPB) fabric attach feature can be used to simplify configuration in an SBP enabled network. Please also generally enable the LLDP function to use this feature. When enabled the port will act as c…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.7.1.2
fabricAttachPortConfigMsgAuthentication
when enabled message authentication using the fa_auth key is used.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.82.7.1.3
fabricAttachPortConfigEnterFaAuthKey
Enter the fabric attach authentication keys required to access the network. No spaces are permitted.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.7.1.4
fabricAttachPortConfigEncryptedFaAuthKey
Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.7.1.5

statusTable

table
.1.3.6.1.4.1.3181.10.6.2.82.101 · 1 row entry · 11 columns
Open in standard view 
This table lists the status of all defined VLANs.
statusEntry entry .1.3.6.1.4.1.3181.10.6.2.82.101.1
Indexes
statusVlanIndex
Column Syntax OID
statusVlanIndex
Automatically generated
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.1
statusVlanId
VLAN identifier
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.2
statusTimeMark SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.3
statusAlias
Contains the alias name for static entries.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.4
statusPortMembers
Lists all ports that belong to this VLAN.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.5
statusFilterDatabase
filter data base
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.6
statusEgressPorts
The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.7
statusUntaggedPorts
The set of ports which are transmitting traffic for this VLAN as untagged frames.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.8
statusFabricAttachState
Indicates if auto attachment to the fabric was successful.
Enumeration
Enumerated Values:
0disabled
1active
2rejected
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.9
statusCreationMode
Indicates by which means this VLAN entry was created.
Enumeration
Enumerated Values:
0filterTable
1pacc
2mvrp
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.10
statusCreationTime
The value of system.uptime when this VLAN was created.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.101.1.11

portStatusTable

table
.1.3.6.1.4.1.3181.10.6.2.82.102 · 1 row entry · 6 columns
Open in standard view 
Port related view of the currently active VLAN setup.
portStatusEntry entry .1.3.6.1.4.1.3181.10.6.2.82.102.1
Indexes
portStatusPortIndex
Column Syntax OID
portStatusPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.1
portStatusAssignedVlanIds
List of all VLAN ids that are configured or dynamically assigned to this port.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.2
portStatusDynamicDefaultVlanId
Indicates the current port default VLAN. The value may change due to port authentication or configuration.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.3
portStatusLastUpdateMethod
Indicates what caused the last VLAN reconfiguration.
Enumeration
Enumerated Values:
0config
1viaMacTable
2macViaRadius
3ms8021xViaRadius
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.4
portStatusLastUpdatingMac
Indicates which MAC address, if any, was involve in changing the VLAN setting for this port last.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.5
portStatusLastUpdateTime
Indicates the time when the VLAN settings were last changed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.102.1.6

mvrpStatusTable

table
.1.3.6.1.4.1.3181.10.6.2.82.103 · 1 row entry · 3 columns
Open in standard view 
This table lists MVRP status information.
mvrpStatusEntry entry .1.3.6.1.4.1.3181.10.6.2.82.103.1
Indexes
mvrpStatusPortIndex
Column Syntax OID
mvrpStatusPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.82.103.1.1
mvrpStatusLastSourceMac
The Source MAC Address of the last MVRP message received on this port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3181.10.6.2.82.103.1.2
mvrpStatusFailedRegistrations
The total number of failed MVRP registrations, for any reason, on this port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.82.103.1.3