G6-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
26

configTable

table
.1.3.6.1.4.1.3181.10.6.2.83.2 · 1 row entry · 6 columns
Open in standard view 
This section configures the base QOS settings.
configEntry entry .1.3.6.1.4.1.3181.10.6.2.83.2.1
Indexes
configPortIndex
Column Syntax OID
configPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.1
configEnable802dot1p
Enable prioritisation of received packets based on their VLAN priority value according to IEEE 802.1p.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.2
configEnableDiffserv
Enable prioritisation of received packets based on the DSCP value in their IP header.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.3
configPriorityScheme
Selection of prioritsation method.
Enumerationr/w
Enumerated Values:
0weighted
1strict
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.4
configForceDefaultPriorityQueue
When enabled the default_priority_queue value is used for this port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.5
configDefaultPriorityQueue
Default priority value for port. Received packets are handeled according to this setting if VLAN tag and IP header priority is disabled.
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.2.1.6

ieee802dot1pPrioMappingTable

table
.1.3.6.1.4.1.3181.10.6.2.83.3 · 1 row entry · 9 columns
Open in standard view 
Mapping of the 8 VLAN priority values on the device internal 4 queues (0-3). 802.1p mapping: Prio 0-7 on Queues 1/0/0/1/2/2/3/3.
ieee802dot1pPrioMappingEntry entry .1.3.6.1.4.1.3181.10.6.2.83.3.1
Indexes
ieee802dot1pPrioMappingIndex
Column Syntax OID
ieee802dot1pPrioMappingIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.1
ieee802dot1pPrioMappingTag0
Default value: QUEUE_1
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.2
ieee802dot1pPrioMappingTag1
Default value: QUEUE_0
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.3
ieee802dot1pPrioMappingTag2
Default value: QUEUE_0
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.4
ieee802dot1pPrioMappingTag3
Default value: QUEUE_1
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.5
ieee802dot1pPrioMappingTag4
Default value: QUEUE_2
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.6
ieee802dot1pPrioMappingTag5
Default value: QUEUE_2
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.7
ieee802dot1pPrioMappingTag6
Default value: QUEUE_3
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.8
ieee802dot1pPrioMappingTag7
Default value: QUEUE_3
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.3.1.9

diffservPrioMappingTable

table
.1.3.6.1.4.1.3181.10.6.2.83.4 · 1 row entry · 2 columns
Open in standard view
diffservPrioMappingEntry entry .1.3.6.1.4.1.3181.10.6.2.83.4.1
Indexes
diffservPrioMappingIndex
Column Syntax OID
diffservPrioMappingIndex
Automatically generated
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3181.10.6.2.83.4.1.1
diffservPrioMappingDscp
Mapping of the 64 DiffServ Codepoints (0-63) on the device internal queues.
Enumerationr/w
Enumerated Values:
0queue0
1queue1
2queue2
3queue3
 .1.3.6.1.4.1.3181.10.6.2.83.4.1.2

rateShapingTable

table
.1.3.6.1.4.1.3181.10.6.2.83.5 · 1 row entry · 9 columns
Open in standard view 
This section defines optional bandwidth limiting features.
rateShapingEntry entry .1.3.6.1.4.1.3181.10.6.2.83.5.1
Indexes
rateShapingPortIndex
Column Syntax OID
rateShapingPortIndex
Automatically generated
Integer32
Constraints:
range: 0-24
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.1
rateShapingEgressBandwidthPercent
Limits the outgoing frame rate by extending the interframe gap. Egress rate shaping is independend of the frame type. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal opera…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.2
rateShapingIngressUnicastPercent
Limits the incoming unicast frame rate. Excess unicast frames are dropped and lead to port flow control frames. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.3
rateShapingIngressMulticastPercent
Limits the incoming multicast frame rate. Excess multicast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.4
rateShapingIngressBroadcastPercent
Limits the incoming broadcast frame rate. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.5
rateShapingIngressUser1Percent
Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.6
rateShapingIngressUser2Percent
Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.7
rateShapingUser1FrameTypes
Select for which frame types igress rate shaping should be applied.
Enumerationr/w
Enumerated Values:
0disabled
1arp
2tcpControl
3arpAndTcpCtrl
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.8
rateShapingUser2FrameTypes
Select for which frame types igress rate shaping should be applied and which leads to port flow control frames.
Enumerationr/w
Enumerated Values:
0disabled
1udpData
2tcpData
3udpAndTcpData
4nonUdpTcpData
 .1.3.6.1.4.1.3181.10.6.2.83.5.1.9