Non-Specific Disablement of Management Access

Alarms are logged but not notified, service affecting changes and operations are permitted

SPEQ Message Loss

SPEQ not functioning, OSC Fiber(s) missing

Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm.

Adopted PPC exceeded the PPC range

Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type.

Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type.

Alarm is raised when SPEQ Gain Adoption process fails.

This trap is sent every time an entity is created. No containers
or other sub-entities in the chassis are reported created by this trap,
the NMS must read these data.

This trap is sent every time an entity is deleted. The
sub-entities (containers, modules, etc.) are not reported deleted.

This trap is sent when an entity state is changed.

This trap is sent when some object is changed.

Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition.

Span Equalization Gain Not Adjusted.

Span Equalization Gain Adjustment Failed.

Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization.

Span Equalization request denied; operation could not be performed by the SPEQ-Server

PPC is auto calculated based on the adopted Gain for Brown-Field installations.

Provisioned per-channel power level exceeded the allowable limit

Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA.