FS-VPLS-LDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
6

fsvplsLdpConfigTable

table
.1.3.6.1.4.1.52642.1.1.10.2.78.1.1 · 1 row entry · 6 columns
Open in standard view 
This table specifies information for configuring
and monitoring LDP specific parameters for
Virtual Private Lan Services(VPLS).
fsvplsLdpConfigEntry entry .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1
A row in this table represents LDP specific information
for Virtual Private Lan Service(VPLS) in a packet network.
It is indexed by fsvplsConfigIndex, which uniquely
identifies a single VPLS.

A row is autom…
Indexes
FS-VPLS-GENERIC-MIBfsvplsConfigIndex fsvplsLdpPwIndex
Column Syntax OID
fsvplsLdpPwIndex
Index for pesudowire using LDp signal. This figures out one PW with one peer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.1
fsvplsLdpPeerAddr
This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(pwPeerAddrType is 'unknown').
The value of this obje…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.2
fsvplsLdpPwId
Same as VC ID. Please refer to system configuration guide for more details.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.3
fsvplsPwType
The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.

The value of this object must be
specified when the row is created and cannot
be changed while the row status i…
Enumerationr/w
Enumerated Values:
1mesh
2spoke
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.4
fsvplsPwEncapType
This value indicates the emulated service to be carried over
this PW.
IANA-PWE3-MIBIANAPwTypeTCr/w
Textual Convention: IANA-PWE3-MIBIANAPwTypeTC Enumeration
Type Values:
0other
1frameRelayDlciMartiniMode
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
32767wildcard
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.5
fsvplsLdpNeighborRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.52642.1.1.10.2.78.1.1.1.6