The SNMP trap that is generated when a power supply fails
to operate normally. The value is a packed bit string;
the 2 power supplies status are encoded into 4 bits
(a nibble). 
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
          
bit position   meaning
------------   -------
4-31	 reserved
3		 Power  Supply 2 DC (0=bad, 1=good).
2		 Power  Supply 1 DC (0=bad, 1=good).
1		 Power  Supply 2 present status (0=present, 1=not-present).
0		 Power  Supply 1 present status (0=present, 1=not-present).

An ospfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key  or  au-
thentication  type conflicts with this router's
authentication key or authentication type.

The SNMP trap that is generated when a fan operational status
changed from failure to normal or change in the fan speed due to
temperature variations downwards.

The SNMP trap that is generated when the actual temperature
reading is below the warning temperature threshold.

The SNMP trap that is generated when any CAM partition
becomes full.

The SNMP trap that is generated if there is a warning during optical
monitoring.
The first varbind, snAgGblTrapMessage, will have a detailed message on
the cause of event. The second optional varbind, ifIndex, points to the affected interface
originating this event. If an event does not have associated port, or has multiple
associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if there is an alarm during optical
monitoring.
The first varbind, snAgGblTrapMessage, will have a detailed message on
the cause of event. The second optional varbind, ifIndex, points to the affected interface
originating this event. If an event does not have associated port, or has multiple
associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if there is an error during optical
monitoring.
The first varbind, snAgGblTrapMessage, will have a detailed message on
the cause of event. The second optional varbind, ifIndex, points to the affected interface
originating this event. If an event does not have associated port, or has multiple
associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if there is a warning during POS 
alarm monitoring.
 The first varbind, snAgGblTrapMessage, will have a detailed message on
 the cause of event. The second optional varbind, ifIndex, points to the affected interface
 originating this event. If an event does not have associated port, or has multiple
 associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if there is an alarm up/down 
during POS alarm monitoring.
 The first varbind, snAgGblTrapMessage, will have a detailed message on
 the cause of event. The second optional varbind, ifIndex, points to the affected interface
 originating this event. If an event does not have associated port, or has multiple
 associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if there is an error during POS
alarm monitoring.
The first varbind, snAgGblTrapMessage, will have a detailed message on
the cause of event. The second optional varbind, ifIndex, points to the affected interface
originating this event. If an event does not have associated port, or has multiple
associated ports, then ifIndex will have maximum value 0x7ffffff.

The SNMP trap that is generated if optics is incompatible with port configuration.

The SNMP trap that is generated if TM logging is started by an event trigger.

The SNMP trap that is generated if TM logging stopped due to storage full.

The SNMP trap that is generated if TM logging restarted after user clearing the log.

The SNMP trap that is generated if optics vendor is not Ruckus Wireless, Inc.

The SNMP trap that is generated when TM recovery slot reset is triggered.

The SNMP trap that is generated when system detects egress data errors on Traffic Manager.
For e.g.  Fabric Monitoring : TM Egress data errors detected on LP <num>/TM <num>

An ospfIfRxBadPacket trap  signifies  that  an
OSPF  packet has been received on a non-virtual
interface that cannot be parsed.

The SNMP trap that is generated when a login attempt by a 
telnet or SSH client fails.

The SNMP trap that is generated when a link from LP Traffic Manager to 
SFM Fabric Element is down.
For eg.  Fabric Monitoring Link Down : SFM <num>/FE <num>/Link <num>, LP <num>/TM <num>

The SNMP trap that is generated when a link from LP Traffic Manager to 
SFM Fabric Element is up.
For eg.  Fabric Monitoring Link Up : SFM <num>/FE <num>/Link <num>, LP <num>/TM <num>

The SNMP trap that is generated when system fails to access a  SFM Fabric Element.
For e.g.  Fabric Monitoring : Device access failure in SFM <num>/FE <num>

The SNMP trap that is generated when a local user configuration is changed.

The SNMP trap that is generated when a vlan configuration is changed.

The SNMP trap that is generated when a ACL configuration is changed.

The SNMP trap that is generated when a MAC Filter configuration is changed.

The SNMP trap that is generated when a SNMP configuration is changed.

The SNMP trap that is generated when a Syslog configuration is changed.

The SNMP trap that is generated when enable or line password is changed.

The SNMP trap that is generated when a server is disabled or enabled.

The SNMP trap that is generated when the real server's port reaches
maximum number of connections.

An ospfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed.

The SNMP trap that is generated when the ISP link goes down.

The SNMP trap that is generated when all chassis fans change to low speed.

The SNMP trap that is generated when all chassis fans change to medium speed.

The SNMP trap that is generated when all chassis fans change to medium high speed.

The SNMP trap that is generated when all chassis fans change to high speed.

The SNMP trap that is generated when FIPS mode is enabled.

The SNMP trap that is generated when FIPS mode is disabled.The zeroization of host keys and shared secret keys is done after this trap is sent.

The SNMP trap that is generated when host keys are zeroized in FIPS mode

The SNMP trap that is generated when the ISP link goes up.

The SNMP trap that is generated when shared secret are zeroized in FIPS mode

The SNMP trap that is generated after POST.

The SNMP trap that is generated on cryptographic  module failure.

The SNMP trap that is generated when the priority of a port is changed.

The SNMP trap that is generated when automatic port disable was triggered.

The SNMP trap that is generated when automatic port disable was released.

The SNMP trap that is generated when plug-and-play status change.

The SNMP trap that is generated when ISRP Peer changes state.

The SNMP trap that is generated when a wireless station's state changes.

The SNMP trap that is generated when we received a MOVE request from
the AP

The SNMP trap that is generated when SAPP between an AP and a FIPS
changes state.

An ospfTxRetransmit  trap  signifies  than  an
OSPF  packet  has  been retransmitted on a non-
virtual interface.  All packets that may be re-
transmitted  are associated with an LSDB entry.
The LS type, LS ID, and Router ID are  used  to
identify the LSDB entry.

The SNMP trap that is generated when the external power supply
connecting or disconnecting to a power over ethernet module.

The SNMP trap that is generated when a malicious mac
address was detected.

The SNMP trap that is generated when software port link status
has changed to up or down.

The SNMP trap that is generated when software port control status
has changed to authorize or unauthorize.

The SNMP trap that is generated when VLAN ID of a port
has changed.

The SNMP trap that is generated when software failed
to setup a filter to a mac address of a port.

The SNMP trap that is generated when software detected
system error.

The SNMP trap that is generated when a port configuration is changed.

The SNMP trap that is generated when VLAN ID of a port
has changed.

The SNMP trap that is generated when web authentication is enabled.

An ospfTxRetransmit  trap  signifies  than  an
OSPF packet has been retransmitted on a virtual
interface.  All packets that may be retransmit-
ted  are  associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry.

The SNMP trap that is generated when web authentication is disabled.

The SNMP trap that is generated when IP system address changes.

The SNMP trap that is generated when IPv6 system address changes.

The SNMP trap that is generated when a request from Mac-Auth
to RADIUS has not been answered within the retry and time limit.

The SNMP trap that is generated when a request from 802.1x
to RADIUS has not been answered within the retry and time limit.

The SNMP trap that is generated when UDLD port link status
has changed to down.

The SNMP trap that is generated when UDLD port link status
has changed to up.

The SNMP trap that is generated when MAC based VLAN is enabled.

The SNMP trap that is generated when MAC based VLAN is disabled.

The SNMP trap that is generated when a fan operational status
changed from failure to normal.

An ospfOriginateLsa trap signifies that a  new
LSA  has  been originated by this router.  This
trap should not be invoked for simple refreshes
of  LSAs  (which happesn every 30 minutes), but
instead will only be invoked  when  an  LSA  is
(re)originated due to a topology change.  Addi-
tionally, this trap does not include LSAs  that
are  being  flushed  because  they have reached
MaxAge.

The SNMP trap that is generated when VLAN's Root-Guarded port received superior BPDU.

The SNMP trap that is generated when VLAN's ports's Root-Guard expire.

The SNMP trap that is generated when VLAN's BPDU-guarded port received BPDU .

The SNMP trap that is generated when BPDU-guarded port received BPDU .

The SNMP trap that is generated when  Interface error-disable is hit or recovery times out .

The SNMP trap that is generated when LACP port changes its state.

The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Ruckus Wireless, Inc.

The SNMP trap that is generated if optical monitoring is enabled but the Ruckus Wireless optic is not capable.

The SNMP trap that is generated if a new entry is added to static multicast mac configuration table.
Format 1: Static Mac entry with Mac Address <xxxx:xxxx:xxxx> is added to portnumber <port> on VLAN <id>
Format 2: Static Mac entry with Mac Address <xxxx:xxxx:xxxx> is added to portmask <0xXXXXXXXX-XXXXXXXX> on VLAN <id>

The SNMP trap that is generated if an entry is removed from static multicast mac configuration table .
Format 1: Static Mac entry with Mac Address <xxxx:xxxx:xxxx> is deleted from portnumber <port> on VLAN <id>
Format 2: Static Mac entry with Mac Address <xxxx:xxxx:xxxx> is deleted from portmask <0xXXXXXXXX-XXXXXXXX> on VLAN <id>

An ospfMaxAgeLsa trap signifies  that  one  of
the LSA in the router's link-state database has
aged to MaxAge.

The SNMP notification that is generated when a port is re-enabled after being disabled due to BPDU Guard Violation.
Format: STP: BPDU Guard re-enabled on VLAN <id> port <slot>/<port>

The SNMP notification is generated when a port loop is detected.
Format: LOOP DETECTION: VLAN <id>,  port <slot>/<port> detect, putting into err-disable state

The SNMP trap that is generated when system is running out of TCAM spaces allocated for routing entries.

The SNMP trap that is generated when a unit is elected as Master unit for the stacking system.

The SNMP trap that is generated when a unit has been added to the stacking system.

The SNMP trap that is generated when a unit has been deleted from the stacking system.

The SNMP trap that is generated when a power supply operational
status changed from failure to normal for a stacking system.

The SNMP trap that is generated when a power supply operational
status changed from normal to failure for a stacking system.

The SNMP trap that is generated when a fan operational status
changed from failure to normal for a stacking system

The SNMP trap that is generated when a fan fails
to operate normally for a stacking system.

An ospfLsdbOverflow trap  signifies  that  the
number of LSAs in the router's link-state data-
base has exceeded ospfExtLsdbLimit.

The SNMP trap that is generated when the managemnet MAC
address of a stacking system has been changed.

The SNMP trap that is generated when the actual temperature
reading is above the warning temperature threshold for a stack
sytem.

The SNMP trap that is generated when the Interface Index (IfIndex)
assignment for the physical interfaces was changed.

The SNMP trap that is generated when a Policy Based Routing (PBR) routemap 
is bound or unbound either globally or to an interface.

The SNMP trap that is generated when an External Redundant 
Power Supply (RPS2-EIF) is added to the system.

The SNMP trap that is generated when an External Redundant 
Power Supply (RPS2-EIF) is removed from the system.

The SNMP notification that is generated when a module's operational state changes.
The management entity receiving the notification can identify the
module and the event by referencing snChasUnitIndex, snAgentBrdIndex, snAgentBrdModuleStatus.
In case of a module-down event, the varbind snAgGblTrapMessage is a text string 
that describes the cause. In case of module-up event, snAgGblTrapMessage is a null
string.

The SNMP trap that is generated when chassis doesn't have high speed fans for specific modules

The SNMP trap that is generated when the revertible
sysmax elements are reverted during the card bringup
if they can not be accomodated in the available memory.

The SNMP trap that is generated when its found during bootup that
the configured sysmax set shall leave less than 10% available memory free.

An ospfLsdbApproachingOverflow trap  signifies
that  the  number of LSAs in the router's link-
state database has exceeded ninety  percent  of
ospfExtLsdbLimit.

The SNMP trap that is generated when the available dynamic memory
in a card is below 5% of the installed physical memory.

The SNMP trap that is generated when the dynamic memory
fails to be allocated in a system.

The SNMP trap that is generated when Link-OAM port link status
has changed to down.

The SNMP trap that is generated when Link-OAM port link status
has changed to up.

The SNMP trap that is generated to provide information about state of the management module's  I2C accesses.

The SNMP trap that is generated when Link-OAM port has entered
loopback mode. The link is not useful for data transfer any more.

The SNMP trap that is generated when Link-OAM port has entered
loopback mode. The link is not useful for data transfer any more.

The SNMP trap that is generated when a new license is added to the system.

The SNMP trap that is generated when an existing license is removed from the system.

The SNMP trap that is generated when a trial license is about to expire. This trap is generated
daily for last 3 days and every 2 hours on the last day of expire.

The SNMP trap that is generated when the maximum number
of connections reached.

The SNMP trap that is generated when a trial license has expired.

The SNMP trap that is generated when UDLD detects CRC failures on  PDUs received on a port

The SNMP trap that is generated when a unit is elected as Standby unit for the stacking system.

The SNMP notification is generated when MAC movement exceeding the certain threshold for a sampling interval is detected.
Format: Mac-Move threshold-rate: MAC address <mac> moved from interface <port-id> to interface <port-id> for vlan <vlan-id>, 
<move-count> times exceeding the threshold rate <threshold-rate> for a sampling interval <interval> seconds

The SNMP notification is generated every user configured interval, summarizing the moves in the interval .
Format: Mac-Move Interval-History: <#macs> macs moved in last <interval> seconds. Total number of mac moves in the interval is <#moves>

The SNMP trap that is generated when a stacking system mode is changed.
Format: The stacking system is changed to Mixed Stacking mode

The SNMP trap that is generated when more source MAC addresses
are received from a port than the maximum number of addresses
configured to that port.

The SNMP trap that is generated when the number of TCP
SYN limits reached.

The SNMP notification is generated when SYSMON detects internal error.

The SNMP notification is generated when MAC event(s) is(are) detected.
Format: MAC-Event:MAC:<mac>-VLAN:<vlan-id>-PORT:<port-id>-ACT:<action>::MAC:<mac>-VLAN:<vlan-id>-PORT:<port-id>-ACT:<action>:: ...
		...MAC:<mac>-VLAN:<vlan-id>-PORT:<port-id>-ACT:<action>::
		where action: 1-MAC addition; 2-MAC deletion; 3-remove all MACs; 4-remove MAC from a port; 
		5-remove MAC from a VLAN; 6-remove MAC from a VLAN on a port

The SNMP notification is generated when MAC event buffer full is detected.
Format: MAC-Event: The Buffer is full, FDB table walk is required

The SNMP trap that is generated when VLAN's ports's Designated-Guard detect.

The SNMP trap that is generated when VLAN's ports's Designated-Guard disable.

The SNMP trap that is generated when a non-node locked licensed feature is enabled with 
no a non-node locked license installed.
Format: Stack <stack_id>: Use of the <feature_name> feature requires a license to be purchased 
and installed within <day> days.

The SNMP trap that is generated when a non-node locked licensed feature is enabled after 
30-44 days with no a non-node locked license installed. This message will be displayed 3 times 
day 30, day 37, day 44. 
Format: Stack <stack_id>: The <feature_name> feature has been activated for <day> days. 
To ensure compliance, please purchase and install a license as soon as possible

The SNMP trap that is generated when a non-node locked licensed feature is enabled after 45+ days 
whit no a non-node locked license installed. Or deletion of an installed license if any of the 
associsted features are still enabled. This message will be displayed daily.
Format: Stack <shack_id>: THIS UNIT IS NOT COMPLIANT. A license for <feature_name> feature must 
be purchased and installed or the feature <feature_name> must be deactivated to become compliant 
with the terms and conditions of use

The SNMP trap that is generated when a non-node locked licensed feature is enabled after a 
non-node locked license is deleted.
Format: Stack <shack_id>: The <license_name> license has been deleted on this unit and is available 
for redeployment on another unit in accordance with the terms and conditions of use. All features 
associated to this license must be disabled

The SNMP trap that is generated when the background diagnosis detects the connection errors 
to notify the user to check the connections in a stacking system 
Format: Background diagnosis detects connection errors. Please use show stack conn to 
view detailed connections

The SNMP trap that is generated when the load balancing
real server is up.

The SNMP trap that is generated when a unit is changed from Standby to Stand alone when the active unit is down.

The SNMP trap that is generated after reached the Broadcast limit.

The SNMP trap that is generated after reached the Multicast limit.

The SNMP trap that is generated after reached the Unknown Unicast limit.

The SNMP trap that is generated when the PSU fan status changed.

The SNMP trap that is generated when system completed stack upgrade process.
Format: Stack: system upgrade completed

The SNMP trap that is generated when system failed stack upgrade process.
Format: Stack: system upgrade failed

The SNMP trap that is generated when unit completed upgrade process.
Format: Stack: stack unit <unit_id> completed upgrade

The SNMP trap that is generated when unit failed upgrade process.
Format: Stack: system upgrade failed, stack unit <unit_id> is in failure state

The SNMP trap that is generated when system starts stack upgrade process.
Format: Stack: system upgrade started and most of user interfaces are blocked

The SNMP trap that is generated when the load balancing
real server is down.

The SNMP trap that is generated when Ignore Shutdown Temperature
Threshold is enabled for a stack unit.

The SNMP trap that is generated when Ignore Shutdown Temperature
Threshold is disabled for a stack unit.

The SNMP trap that is generated when battleshort mode is enabled at global level.

The SNMP trap that is generated when battleshort mode is disabled at global level..

The SNMP trap that is generated when SAU license option is changed.
Format: Stack: SAU license option on unit <unit_id> is changed to <sau_type>

The SNMP trap that is generated when port security violation protect is activated
Format: Security: Port Security violation protect activated on interface ethernet <port_id>

The SNMP trap that is generated when port security violation protect is de-activated
Format: Security: Port Security violation protect de-activated on interface ethernet <port_id>

The SNMP trap that is generated when SAU license option is deleted.
Format: Stack: unit <unit_id> deleted SAU license option <sau_type>

The SNMP trap that is generated when Clold manager is connected.
Format: Cloud: Cloud manager is connected. All local configuration interfaces are locked

The SNMP trap that is generated when Clold manager is disconnected.
Format: Cloud: Cloud manager is connected. All local configuration interfaces are available

The SNMP trap that is generated when the load balancing
real server TCP port is up.

The SNMP trap that is generated when Manager Two-Factor Authentication is enabled.
Format: MGMT Agent: Manager 2 Factor Authentication enabled.

The SNMP trap that is generated when Manager Two-Factor Authentication is disabled.
Format: MGMT Agent: Manager 2 Factor Authentication disabled.

The SNMP trap that is generated when the load balancing
real server TCP port is down.

The SNMP trap that is generated when the real server reaches
maximum number of connections.

The SNMP trap that is generated when the server load
balancing switch changes state from active to standby.

The SNMP trap that is generated when the server load
balancing switch changes state from standby to active.

The SNMP trap that is generated when a module was inserted
to the chassis during system running.

The SNMP trap that is generated when a module was removed
from the chassis during system running.

An ospfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should  be  generated
when  the interface state regresses (e.g., goes
from Dr to Down) or progresses  to  a  terminal
state  (i.e.,  Point-to-Point, DR Other, Dr, or
Backup).

The SNMP trap that is generated when a power supply operational
status changed from normal to failure.

The SNMP trap that is generated when a fan fails
to operate normally.

The SNMP trap that is generated when more source MAC addresses
are received from a port than the maximum number of addresses
configured to that port.

The SNMP trap that is generated when a FSRP routing device
changed state from active to standby or vice-versa.

The SNMP trap that is generated when a VRRP routing device
switched between states master, backup, intialized or uknown.

The SNMP trap that is generated when the management module
changes redundancy state.

The SNMP trap that is generated when the actual temperature
reading is above the warning temperature threshold.

The SNMP trap that is generated when a packet was denied
by an access list.

The SNMP trap that is generated when a packet was denied
by a MAC address filter.

The SNMP trap that is generated when the connection to the remote SI is established.

An ospfIfStateChange trap signifies that there
has  been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when  the  inter-
face  state  regresses  (e.g., goes from Point-
to-Point to Down) or progresses to  a  terminal
state (i.e., Point-to-Point).

The SNMP trap that is generated when the connection to the remote SI is down.

The SNMP trap that is generated when the connection to the GSLB SI is established.

The SNMP trap that is generated when the connection to the GSLB SI is down.

The SNMP trap that is generated when GSLB health check for an address transitions
from down to active state.

The SNMP trap that is generated when GSLB health check for an address transitions
from active to down state.

The SNMP trap that is generated when a given port for a health check address is up.

The SNMP trap that is generated when a given port for a health check address is down.

The SNMP trap that is generated when the server load
balancing switch Firewall changes state from active to standby.

The SNMP trap that is generated when the server load
balancing switch Firewall changes state from standby to active.

The SNMP trap that is generated when the server load
balancing switch Firewall path is up.

An  ospfNbrStateChange  trap  signifies   that
there  has been a change in the state of a non-
virtual OSPF neighbor.   This  trap  should  be
generated  when  the  neighbor  state regresses
(e.g., goes from Attempt or Full  to  1-Way  or
Down)  or progresses to a terminal state (e.g.,
2-Way or Full).  When an  neighbor  transitions
from  or  to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated  by the designated router.  A designated
router transitioning to Down will be  noted  by
ospfIfStateChange.

The SNMP trap that is generated when the server load
balancing switch Firewall path is down.

The SNMP trap that is generated when incoming ICMP exceeds burst-MAX.

The SNMP trap that is generated when transit ICMP exceeds burst-MAX.

The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX.

The SNMP trap that is generated when transit TCP exceeds burst-MAX.

The SNMP trap that is generated when the HTTP match-list pattern
is found.

Duplicate IP address detected.

NOT IMPLEMENTED: MPLS Problem Detected.

NOT IMPLEMENTED: MPLS Exception Detected.

NOT IMPLEMENTED: MPLS Audit Trap.

An ospfIfStateChange trap signifies that there
has  been a change in the state of an OSPF vir-
tual neighbor.  This trap should  be  generated
when  the  neighbor state regresses (e.g., goes
from Attempt or  Full  to  1-Way  or  Down)  or
progresses to a terminal state (e.g., Full).

NOT IMPLEMENTED: MPLS Developer Trap.

The SNMP trap that is generated when no free queue is available in buffer manager.

The SNMP trap that is generated when SMC DMA packet is dropped.

The SNMP trap that is generated when SMC BackPlane packet is dropped.

The SNMP trap that is generated when BM write sequence packet is dropped.

The SNMP trap that is generated when the bgp peer is up.

The SNMP trap that is generated when the bgp peer is down.

The SNMP trap that is generated when the real server average response time exceeds lower threshold.

The SNMP trap that is generated when the real server average response time exceeds upper threshold.

The SNMP trap that is generated when the TCP attack rate exceeds configured maximum.

An ospfIfConfigError  trap  signifies  that  a
packet  has  been received on a non-virtual in-
terface  from  a  router  whose   configuration
parameters  conflict  with this router's confi-
guration parameters.  Note that the  event  op-
tionMismatch  should  cause  a  trap only if it
prevents an adjacency from forming.

The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum.

The SNMP trap that is generated when the L4 connection rate exceeds configured maximum.

The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum

The SNMP trap that is generated when the running configuration
was changed.

The SNMP trap that is generated when the startup configuration
was changed.

The SNMP trap that is generated when user login.

The SNMP trap that is generated when user logout.

The SNMP trap that is generated when insecure MAC addresses
are received from a port with MAC security feature enabled.

The SNMP trap that is generated when insecure MAC addresses
are received from a port caused the port to shutdown.

The SNMP trap that is generated when a MRP switching and routing device
changed state to  disabled, blocking, preforwarding, forwarding, uknown.

An ospfConfigError trap signifies that a pack-
et  has  been  received  on a virtual interface
from a router  whose  configuration  parameters
conflict   with   this  router's  configuration
parameters.  Note that the event optionMismatch
should  cause a trap only if it prevents an ad-
jacency from forming.

The SNMP trap that is generated when a MRP Cam Error occurs.

The SNMP trap that is generated when a power supply operational
status changed from failure to normal.

The SNMP trap that is generated when a VRRPE routing device
switched between states master, backup, intialized or uknown.

The SNMP trap that is generated when a VSRP switching and routing device
switched between states master, backup, intialized or uknown.

The SNMP trap that is generated when a rogue device spoofs source
IP address for denial of service attack.

The SNMP trap that is generated when MAC-Authentication is enabled 
on an interface.

The SNMP trap that is generated when MAC-Authentication is disabled 
on an interface.

The SNMP trap that is generated when MAC-Authentication is successful 
on an interface.

The SNMP trap that is generated when MAC-Authentication is failed 
on an interface.

The SNMP trap that is generated when an interface is disabled due to
MAC-Authentication detecting a DOS attack on that interface.

An ospfIfAuthFailure  trap  signifies  that  a
packet  has  been received on a non-virtual in-
terface from a router whose authentication  key
or  authentication  type  conflicts  with  this
router's authentication key  or  authentication
type.