FASTPATH-ROUTING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
23
Rows
23
Columns
111

agentSwitchArpTable

table obsolete
.1.3.6.1.4.1.4413.1.1.2.1.10 · 1 row entry · 6 columns
Open in standard view 
This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.
agentSwitchArpEntry entry .1.3.6.1.4.1.4413.1.1.2.1.10.1
Indexes
agentSwitchArpIpAddress
Column Syntax OID
agentSwitchArpAge obsolete
This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.1
agentSwitchArpIpAddress obsolete
The IP Address assigned to each interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.2
agentSwitchArpMacAddress obsolete
The hardware MAX Address that each interface maps to.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.3
agentSwitchArpInterface obsolete
The Associated IfIndex which identified the ARP Entry.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.4
agentSwitchArpType obsolete
The type of ARP entry.
Enumeration
Enumerated Values:
1local
2gateway
3static
4dynamic
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.5
agentSwitchArpStatus obsolete
The status of this ARP entry. Setting this object destroy will remove the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.1.10.1.6

agentSwitchLocalProxyArpTable

table
.1.3.6.1.4.1.4413.1.1.2.1.11 · 1 row entry · 1 columns
Open in standard view 
This table contains the per-interface configuration
parameters for Local Proxy Arp.
agentSwitchLocalProxyArpEntry entry .1.3.6.1.4.1.4413.1.1.2.1.11.1
Represents a logical row in the
agentSwitchLocalProxyArpTable
Indexes
IF-MIBifIndex
Column Syntax OID
agentSwitchLocalProxyArpMode
The Local Proxy Arp Mode for the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.1.11.1.1

agentSwitchIntfArpTable

table
.1.3.6.1.4.1.4413.1.1.2.1.12 · 1 row entry · 6 columns
Open in standard view 
This table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information.
agentSwitchIntfArpEntry entry .1.3.6.1.4.1.4413.1.1.2.1.12.1
Indexes
agentSwitchIntfArpIpAddress agentSwitchIntfArpIfIndex
Column Syntax OID
agentSwitchIntfArpIpAddress
The Type of Address assigned to this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.1
agentSwitchIntfArpIfIndex
The Associated IfIndex which identified the ARP Entry.
This value must be specified for static ARP entries on an
unnumbered interface
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.2
agentSwitchIntfArpAge
This defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.3
agentSwitchIntfArpMacAddress
The hardware MAX Address that each interface maps to.
RFC1213-MIBPhysAddressr/w
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.4
agentSwitchIntfArpType
The type of ARP entry.
Enumeration
Enumerated Values:
1local
2gateway
3static
4dynamic
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.5
agentSwitchIntfArpStatus
The status of this ARP entry. Setting this object destroy will remove the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.1.12.1.6

agentSwitchIpInterfaceTable

table
.1.3.6.1.4.1.4413.1.1.2.2.3 · 1 row entry · 11 columns
Open in standard view
agentSwitchIpInterfaceEntry entry .1.3.6.1.4.1.4413.1.1.2.2.3.1
Indexes
agentSwitchIpInterfaceIfIndex
Column Syntax OID
agentSwitchIpInterfaceIfIndex
The IfIndex associated with this instance.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.1
agentSwitchIpInterfaceIpAddress
The IpAddress assigned to this interface. When setting this value,
the value of agentSwitchIpInterfaceNetMask must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.2
agentSwitchIpInterfaceNetMask
The NetMask assigned to this interface. When setting this value, the
value of agentSwitchIpInterfaceIpAddress must be set at the same time.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.3
agentSwitchIpInterfaceClearIp
Sets the interfaces IpAddress and NetMask back to 0.0.0.0
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.4
agentSwitchIpInterfaceRoutingMode
Enables or disables routing for this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.5
agentSwitchIpInterfaceProxyARPMode
Enables or disables Proxy ARP for this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.6
agentSwitchIpInterfaceMtuValue
Configures the MTU value for this interface. If the value returned is 0
this interface is not enabled for routing. It is not valid to set this
value to 0 if routing is enabled.
Unsigned32r/w
Constraints:
range: 0-0
range: 128-1500
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.7
agentSwitchIpInterfaceBandwidth
Configures the Bandwidth value for this interface. If the value returned is 0
bandwidth for this interface is not Configured.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.8
agentSwitchIpInterfaceUnnumberedIfIndex
If this object is non-zero, it indicates that the interface is unnumbered,
and specifies which interface the address is borrowed from.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.9
agentSwitchIpInterfaceIcmpUnreachables
If this object is enable, it indicates that ICMP unreachables can be sent on this
interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.10
agentSwitchIpInterfaceIcmpRedirects
If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects
can be sent on this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.3.1.11

agentSwitchIpRouterDiscoveryTable

table
.1.3.6.1.4.1.4413.1.1.2.2.4 · 1 row entry · 7 columns
Open in standard view 
There is no global administrative flag for router discovery.  The global
routing flag (agentSwitchIpRoutingMode) will be used for this purpose.  If routing
is disabled, router discovery is disabled as well.
agentSwitchIpRouterDiscoveryEntry entry .1.3.6.1.4.1.4413.1.1.2.2.4.1
Indexes
agentSwitchIpRouterDiscoveryIfIndex
Column Syntax OID
agentSwitchIpRouterDiscoveryIfIndex
Interface Number to configure Router Discovery on.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.1
agentSwitchIpRouterDiscoveryAdvertiseMode
Enable or disable router discovery on the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.2
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
Maximum time allowed between sending router advertisements
from the interface.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.3
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
Minimum time allowed between sending router advertisements from the interface.

This value must be less than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.4
agentSwitchIpRouterDiscoveryAdvertisementLifetime
Value of lifetime field of router advertsisement sent from
the interface.

This value must be greater than or equal to
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.5
agentSwitchIpRouterDiscoveryPreferenceLevel
Preferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.6
agentSwitchIpRouterDiscoveryAdvertisementAddress
Address used when sending router advertisements from the interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.4.1.7

agentSwitchIpVlanTable

table
.1.3.6.1.4.1.4413.1.1.2.2.5 · 1 row entry · 3 columns
Open in standard view
agentSwitchIpVlanEntry entry .1.3.6.1.4.1.4413.1.1.2.2.5.1
A Static VLAN for which routing can be enabled/disabled
Indexes
agentSwitchIpVlanId
Column Syntax OID
agentSwitchIpVlanId
The Vlan's Id.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.5.1.1
agentSwitchIpVlanIfIndex
The IfIndex associated with this VLAN.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.2.5.1.2
agentSwitchIpVlanRoutingStatus
Status of Routing mode per Vlan.
active(1) - Vlan is enabled for routing
createAndGo(4) - Adds Vlan entry for routing
destroy(6) - Removes Vlan from routing
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.2.5.1.3

agentSwitchSecondaryAddressTable

table
.1.3.6.1.4.1.4413.1.1.2.2.6 · 1 row entry · 3 columns
Open in standard view 
Contains a list of secondary IP Addresses associated with an interface.
agentSwitchSecondaryAddressEntry entry .1.3.6.1.4.1.4413.1.1.2.2.6.1
A secondary IP Address for a given interface. This IP Address must not
conflict with the IP Address configured in the agentSwitchIpInterfaceTable.
Indexes
agentSwitchIpInterfaceIfIndex agentSwitchSecondaryIpAddress
Column Syntax OID
agentSwitchSecondaryIpAddress
The Secondary IP Address assigned to this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.6.1.1
agentSwitchSecondaryNetMask
The Secondary Net Mask assigned to this interface. This value must be
set during creation, and can not be changed.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.6.1.2
agentSwitchSecondaryStatus
Creates a new entry in the Secondary Address table.
Allowed values are:

createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitch…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.2.6.1.3

agentSwitchHelperAddressTable

table obsolete
.1.3.6.1.4.1.4413.1.1.2.2.7 · 1 row entry · 2 columns
Open in standard view 
Replaced by agentSwitchIntfIpHelperAddressTable.
agentSwitchHelperAddressEntry entry .1.3.6.1.4.1.4413.1.1.2.2.7.1
A Helper IP Address for a given interface.
Indexes
agentSwitchIpInterfaceIfIndex agentSwitchHelperIpAddress
Column Syntax OID
agentSwitchHelperIpAddress obsolete
The Helper IP Address assigned to this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.7.1.1
agentSwitchHelperStatus obsolete
Creates a new entry in the Helper Address table.
Allowed values are:

createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentSwitchHel…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.2.7.1.2

agentSwitchIntfIpHelperAddressTable

table
.1.3.6.1.4.1.4413.1.1.2.2.10 · 1 row entry · 5 columns
Open in standard view 
Contains a list of IP helper addresses associated with an interface.
agentSwitchIntfIpHelperAddressEntry entry .1.3.6.1.4.1.4413.1.1.2.2.10.1
An IP helper address for a given interface.
Indexes
agentSwitchIpInterfaceIfIndex agentSwitchIntfIpHelperUdpPort agentSwitchIntfIpHelperIpAddress
Column Syntax OID
agentSwitchIntfIpHelperIpAddress
An IP helper address for packets received on this interface.
An address of 0.0.0.0 identifies the entry as a discard entry.
Packets that match a discard entry are dropped.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.2.10.1.1
agentSwitchIntfIpHelperUdpPort
UDP port number. Received packets with this destination UDP port
number are forwarded to the helper address in this entry.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4413.1.1.2.2.10.1.2
agentSwitchIntfIpHelperDiscard obsolete
Variable obsoleted. To create a discard entry, set the
helper address to 0.0.0.0.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.2.10.1.3
agentSwitchIntfIpHelperHitCount
The number of times a packet has been forwarded or discarded according to this entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.2.2.10.1.4
agentSwitchIntfIpHelperStatus
Creates a new entry in the Helper Address table.
Allowed values are:

createAndGo(4) - Creates an IP helper entry in this table.

destroy(6) - Removes the IP helper entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.2.10.1.5

agentRipRouteRedistTable

table
.1.3.6.1.4.1.4413.1.1.2.3.8 · 1 row entry · 11 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected.
agentRipRouteRedistEntry entry .1.3.6.1.4.1.4413.1.1.2.3.8.1
Indexes
agentRipRouteRedistSource
Column Syntax OID
agentRipRouteRedistSource
Source route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3ospf
4bgp
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.1
agentRipRouteRedistMode
User enabels/disables route-redistribution for a particular source
protocol.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.2
agentRipRouteRedistMetric
Metric used for redistributing a particular source protocol route
into RIP.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.3
agentRipRouteRedistMetricConfigured
Flag to determine whether RIP redistribute-metric is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.4
agentRipRouteRedistMatchInternal
If this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.5
agentRipRouteRedistMatchExternal1
If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.6
agentRipRouteRedistMatchExternal2
If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.7
agentRipRouteRedistMatchNSSAExternal1
If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.8
agentRipRouteRedistMatchNSSAExternal2
If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.
Enumerationr/w
Enumerated Values:
1true
2false
3not-applicable
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.9
agentRipRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
Unsigned32r/w
Constraints:
range: 1-199
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.10
agentRipRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.3.8.1.11

agentRip2IfConfTable

table
.1.3.6.1.4.1.4413.1.1.2.3.9 · 1 row entry · 1 columns
Open in standard view 
A list of subnets which require separate
configuration in RIP.  Augments rip2IfConfTable
 in the RIPv2-MIB.
agentRip2IfConfEntry entry .1.3.6.1.4.1.4413.1.1.2.3.9.1
A Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentRip2IfConfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4413.1.1.2.3.9.1.1

agentOspfRouteRedistTable

table
.1.3.6.1.4.1.4413.1.1.2.4.8 · 1 row entry · 9 columns
Open in standard view 
This table contains the MIB objects required to configure 
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected.
agentOspfRouteRedistEntry entry .1.3.6.1.4.1.4413.1.1.2.4.8.1
Indexes
agentOspfRouteRedistSource
Column Syntax OID
agentOspfRouteRedistSource
Source protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.
Enumeration
Enumerated Values:
1connected
2static
3rip
4bgp
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.1
agentOspfRouteRedistMode
User enabels/disables route-redistribution for a particular source
protocol.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.2
agentOspfRouteRedistMetric
Metric used for redistributing a particular source protocol route
into OSPF.
Integer32r/w
Constraints:
range: 0-16777214
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.3
agentOspfRouteRedistMetricConfigured
Flag to determine whether OSPF redistribute-metric is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.4
agentOspfRouteRedistMetricType
Metric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).
Enumerationr/w
Enumerated Values:
1externalType1
2externalType2
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.5
agentOspfRouteRedistTag
It specifies the tag field in routes redistributed by OSPF.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.6
agentOspfRouteRedistSubnets
If this value is false, then OSPF will not redistribute subnetted routes.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.7
agentOspfRouteRedistDistList
Access-list number of the access-list, which filters routes received
from a source-protocol.
Unsigned32r/w
Constraints:
range: 1-199
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.8
agentOspfRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.4.8.1.9

agentOspfIfTable

table
.1.3.6.1.4.1.4413.1.1.2.4.9 · 1 row entry · 4 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.  Augments 
 ospfIfTable from the OSPF-MIB.
agentOspfIfEntry entry .1.3.6.1.4.1.4413.1.1.2.4.9.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentOspfIfAuthKeyId
The identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4413.1.1.2.4.9.1.1
agentOspfIfIpMtuIgnoreFlag
Configures the IP MTU Ignore Flag value for this OSPF interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.4.9.1.2
agentOspfIfPassiveMode
Flag to determine whether the interface is passive.
A passive interface will not participate in the OSPF
adjacency formation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.4.9.1.3
agentOspfIfAdvertiseSecondaries
Configures the advertisability of the secondary addresses
configured on this interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.2.4.9.1.4

agentOspfVirtIfTable

table
.1.3.6.1.4.1.4413.1.1.2.4.10 · 1 row entry · 1 columns
Open in standard view 
Information about this router's virtual inter-
faces.  Augments ospfVirtIfTable from the OSPF-MIB.
agentOspfVirtIfEntry entry .1.3.6.1.4.1.4413.1.1.2.4.10.1
Information about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB.
Indexes
No indexes recorded
Column Syntax OID
agentOspfVirtIfAuthKeyId
The identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4413.1.1.2.4.10.1.1

agentOspfAreaOpaqueLsdbTable

table
.1.3.6.1.4.1.4413.1.1.2.4.16 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's Area Link State Database (LSDB). 
The LSDB contains type-10 Link State Advertisements 
from throughout the areas that the device is attached to.
agentOspfAreaOpaqueLsdbEntry entry .1.3.6.1.4.1.4413.1.1.2.4.16.1
A single AreaOpaque Link State Advertisement.
Indexes
agentOspfAreaOpaqueLsdbAreaId agentOspfAreaOpaqueLsdbType agentOspfAreaOpaqueLsdbLsid agentOspfAreaOpaqueLsdbRouterId
Column Syntax OID
agentOspfAreaOpaqueLsdbAreaId
The 32 bit identifier of the Area from which
the LSA was received.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.1
agentOspfAreaOpaqueLsdbType
The type of the link state advertisement.
Each link state type has a separate advertisement
format.
Enumeration
Enumerated Values:
10areaOpaqueLink
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.2
agentOspfAreaOpaqueLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.3
agentOspfAreaOpaqueLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.4
agentOspfAreaOpaqueLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.5
agentOspfAreaOpaqueLsdbAge
This field is the age of the link state advertisement
in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.6
agentOspfAreaOpaqueLsdbChecksum
This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.7
agentOspfAreaOpaqueLsdbAdvertisement
The entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4413.1.1.2.4.16.1.8

agentOspfLocalLsdbTable

table
.1.3.6.1.4.1.4413.1.1.2.4.17 · 1 row entry · 9 columns
Open in standard view 
The OSPF Process's Link-Local Link State Database 
for non-virtual links. 
This table is identical to the OSPF LSDB Table 
in format, but contains only Link-Local Link State 
Advertisements for non-virtual links. The purpose is 
to allow Link-Local LSAs to be displayed for each 
non-virtual interface. This table is implemented to 
support type-9 LSAs which are defined 
in 'The OSPF Opaque LSA Option'.
agentOspfLocalLsdbEntry entry .1.3.6.1.4.1.4413.1.1.2.4.17.1
A single Link State Advertisement.
Indexes
agentOspfLocalLsdbIpAddress agentOspfLocalLsdbAddressLessIf agentOspfLocalLsdbType agentOspfLocalLsdbLsid agentOspfLocalLsdbRouterId
Column Syntax OID
agentOspfLocalLsdbIpAddress
The IP Address of the interface from
which the LSA was received if the interface is
numbered.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.1
agentOspfLocalLsdbAddressLessIf
The Interface Index of the interface from
which the LSA was received if the interface is
unnumbered.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.2
agentOspfLocalLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
9localOpaqueLink
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.3
agentOspfLocalLsdbLsid
The Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.4
agentOspfLocalLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.5
agentOspfLocalLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.6
agentOspfLocalLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.7
agentOspfLocalLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The check…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.8
agentOspfLocalLsdbAdvertisement
The entire Link State Advertisement, including
its header.

Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4413.1.1.2.4.17.1.9

agentOspfAsLsdbTable

table
.1.3.6.1.4.1.4413.1.1.2.4.18 · 1 row entry · 7 columns
Open in standard view 
The OSPF Process's AS-scope LSA Link State Database. 
The Database contains the AS-scope Link State 
Advertisements from throughout the areas that 
the device is attached to. 
          
This table is identical to the OSPF LSDB Table 
in format, but contains only AS-scope Link State 
Advertisements.  The purpose is to allow AS-scope 
LSAs to be displayed once for the router rather 
than once in each non-stub area.
agentOspfAsLsdbEntry entry .1.3.6.1.4.1.4413.1.1.2.4.18.1
A single Link State Advertisement.
Indexes
agentOspfAsLsdbType agentOspfAsLsdbLsid agentOspfAsLsdbRouterId
Column Syntax OID
agentOspfAsLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
11asOpaqueLink
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.1
agentOspfAsLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.2
agentOspfAsLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.3
agentOspfAsLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to det…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.4
agentOspfAsLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.5
agentOspfAsLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The check…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.6
agentOspfAsLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4413.1.1.2.4.18.1.7

agentRouterVrrpConfiguredTable

table
.1.3.6.1.4.1.4413.1.1.2.8.2 · 1 row entry · 1 columns
Open in standard view 
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`agentRouterVrrpConfiguredEntry' items.
agentRouterVrrpConfiguredEntry entry .1.3.6.1.4.1.4413.1.1.2.8.2.1
An entry in the table contains operational priority that is
associated with a virtual router.
Indexes
IF-MIBifIndex VRRP-MIBvrrpOperVrId
Column Syntax OID
agentRouterVrrpConfiguredPriority
This object specifies the value set by the vrrpOperPriority object.
The GET operation on 'vrrpOperPriority' will be affected by both the
tracking process and the configured priority set by the vrrpOperPriority object.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.4413.1.1.2.8.2.1.1

agentRouterVrrpOperTable

table obsolete
.1.3.6.1.4.1.4413.1.1.2.9.1 · 1 row entry · 1 columns
Open in standard view 
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`agentRouterVrrpOperEntry' items.
agentRouterVrrpOperEntry entry .1.3.6.1.4.1.4413.1.1.2.9.1.1
An entry in the table contains operational priority that is
associated with a virtual router.
Indexes
IF-MIBifIndex VRRP-MIBvrrpOperVrId
Column Syntax OID
agentRouterVrrpOperPriority obsolete
This object specifies the operational priority of the VRRP router.
This value will be afftected by both the tracking process and the
configured priority set by the vrrpOperPriority object.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4413.1.1.2.9.1.1.1

agentRouterVrrpTrackIntfTable

table
.1.3.6.1.4.1.4413.1.1.2.10.1 · 1 row entry · 4 columns
Open in standard view 
Tracking table for a VRRP router which consists of
agentRouterVrrpTrackIntfEntry items.
agentRouterVrrpTrackIntfEntry entry .1.3.6.1.4.1.4413.1.1.2.10.1.1
An entry in the table contains tracked IP interfaces
associated with a virtual router.
Indexes
IF-MIBifIndex VRRP-MIBvrrpOperVrId agentRouterVrrpTrackIntf
Column Syntax OID
agentRouterVrrpTrackIntf
This object specifies the interface to be tracked.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4413.1.1.2.10.1.1.1
agentRouterVrrpTrackIfPrioDec
This object specifies the decrement priority of the
VRRP router.
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.4413.1.1.2.10.1.1.2
agentRouterVrrpTrackIfState
This object specifies the IP state of the tracked interface
for the virtual router.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.10.1.1.3
agentRouterVrrpTrackIfStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. To create a row in
this table, a manager sets this object to either createAndGo(4)
or createAndWait(5). The newly …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.10.1.1.4

agentRouterVrrpTrackRouteTable

table
.1.3.6.1.4.1.4413.1.1.2.10.2 · 1 row entry · 5 columns
Open in standard view 
Tracking table for a VRRP router which consists of a
'agentRouterVrrpTrackRouteEntry' items.
agentRouterVrrpTrackRouteEntry entry .1.3.6.1.4.1.4413.1.1.2.10.2.1
An entry in the table contains tracked Routes
associated with a virtual router.
Indexes
IF-MIBifIndex VRRP-MIBvrrpOperVrId agentRouterVrrpTrackRtPfx agentRouterVrrpTrackRtPfxLen
Column Syntax OID
agentRouterVrrpTrackRtPfx
This object specifies the prefix of the route to be tracked.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.10.2.1.1
agentRouterVrrpTrackRtPfxLen
This object specifies prefix length of the route to be tracked.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4413.1.1.2.10.2.1.2
agentRouterVrrpTrackRtPrioDec
This object specifies the decrement priority of the
VRRP router.
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.4413.1.1.2.10.2.1.3
agentRouterVrrpTrackRtReachable
This object specifies the reachability of the
tracked route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.2.10.2.1.4
agentRouterVrrpTrackRtStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. To create a row in
this table, a manager sets this object to either createAndGo(4)
or createAndWait(5). The newly …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.10.2.1.5

agentSwitchIpHelperAddressTable

table
.1.3.6.1.4.1.4413.1.1.2.11.8 · 1 row entry · 4 columns
Open in standard view 
Contains a list of IP helper addresses configured globally.
agentSwitchIpHelperAddressEntry entry .1.3.6.1.4.1.4413.1.1.2.11.8.1
An IP Helper address that applies to packets received on any interface.
Indexes
agentSwitchIpHelperAddress agentSwitchIpHelperUdpPort
Column Syntax OID
agentSwitchIpHelperAddress
The IP Helper address assigned to this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4413.1.1.2.11.8.1.1
agentSwitchIpHelperUdpPort
UDP port number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4413.1.1.2.11.8.1.2
agentSwitchIpHelperHitCount
The number of times a packet has been forwarded or discarded according to this entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.2.11.8.1.3
agentSwitchIpHelperStatus
Creates a new entry in the global IP Helper address table.
Allowed values are:

createAndGo(4) - Creates an IP helper entry in this table.

destroy(6) - Removes the IP helper entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.2.11.8.1.4

agentSwitchInternalVlanTable

table
.1.3.6.1.4.1.4413.1.1.2.12.3 · 1 row entry · 2 columns
Open in standard view 
Contains a list of VLAN IDs used internally for port-based routing interfaces.
agentSwitchInternalVlanEntry entry .1.3.6.1.4.1.4413.1.1.2.12.3.1
A VLAN ID internally assigned to a port-based routing interface.
Indexes
agentSwitchInternalVlanId
Column Syntax OID
agentSwitchInternalVlanId
A VLAN ID internally assigned to a port-based routing interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.2.12.3.1.1
agentSwitchInternalVlanIfIndex
Interface index of port-based routing interface using this VLAN ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.2.12.3.1.2