F10-IF-EXTENSION-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
37
f10IfTable
table.1.3.6.1.4.1.6027.3.11.1.1.1
·
1 row entry
·
10 columns
Dell Networking OS Extension ifTable contains generic interface parameters.
A row defintion of Dell Networking OS Interface
Extension parameters.
Extension parameters.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
f10IfIpMtu
The IP (Internet Protocol), Maximum
Transmission Unit value. |
Unsigned32r/w Constraints: range: 594-9252 |
.1.3.6.1.4.1.6027.3.11.1.1.1.1.1 |
||||||||
|
f10IfDuplexMode
Duplex mode of the interface.
This will be read-write only for s60 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6027.3.11.1.1.1.1.2 |
||||||||
|
f10IfQueueingStrategy
Queueing strategy used for packets.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.6027.3.11.1.1.1.1.3 |
||||||||
|
f10IfRxFlowCtrl
Flow control receive. This will be read-write only for s60
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.6027.3.11.1.1.1.1.4 |
||||||||
|
f10IfTxFlowCtrl
Flow Control transmit.This will be read-only only for s60
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.6027.3.11.1.1.1.1.5 |
||||||||
|
f10IfDescr
A textual string containing information about the interface.
This will be read-write only for s60 |
OctetStringr/w Constraints: range: 0-241 |
.1.3.6.1.4.1.6027.3.11.1.1.1.1.6 |
||||||||
|
f10IfAdminStatus
A admin status of any interface.
This will be read-write only for s60 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6027.3.11.1.1.1.1.7 |
||||||||
|
f10IfRateInterval
The rate info interval for the interface.
This will be read-write only for s60 |
Unsigned32r/w Constraints: range: 30-299 |
.1.3.6.1.4.1.6027.3.11.1.1.1.1.8 |
||||||||
|
f10IfSpeed
The interface's current bandwidth in bits per second.
This will be read-write only for s60 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6027.3.11.1.1.1.1.9 |
||||||||
|
f10IfPortListBitPos
This is used for identifying the bit position in PortList Object for a given interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6027.3.11.1.1.1.1.10 |
f10IfStaticsTable
table.1.3.6.1.4.1.6027.3.11.1.2.1
·
1 row entry
·
27 columns
The statistcs information of the interfaces for performance monitoring.
A row defintion of Dell Networking OS Extension
interface statistics.
interface statistics.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
f10IfInVlanPkts
The total number of valid VLAN Tagged
frames received. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.1 |
|
f10IfIn64BytePkts
The total number of frames (including bad
frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.2 |
|
f10ifIn65To127BytePkts
The total number of frames (including bad
frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.3 |
|
f10IfIn128To255BytePkts
The total number of frames (including bad
frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.4 |
|
f10IfIn256To511BytePkts
The total number of frames (including bad
frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.5 |
|
f10IfIn512To1023BytePkts
The total number of frames (including bad
frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.6 |
|
f10IfInOver1023BytePkts
The total number of frames received that
were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.7 |
|
f10IfInThrottles
This counter is incremented when a valid
frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.8 |
|
f10IfInRunts
The total number of frames received that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.9 |
|
f10IfInGiants
The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.10 |
|
f10IfInCRC
The total number of frames received that had
a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.11 |
|
f10IfInOverruns
The total number of frames dropped because
of buffer issue. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.12 |
|
f10IfOutVlanPkts
The Number of Good VLAN Tagged Frames sent
successfully. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.13 |
|
f10IfOutUnderruns
The total number of frames dropped because
of buffer underrun. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.14 |
|
f10IfOutUnicasts
The Number of Good Unicast Frames sent successfully.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.15 |
|
f10IfOutCollisions
A count of the frames that due to excessive
or late collisions are not transmitted successfully. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.16 |
|
f10IfOutWredDrops
A count of the frames that are dropped using
WRED policy because of to excessive traffic. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.17 |
|
f10IfOut64BytePkts
The Number of Good Frames sent successfully
whose size was 64 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.18 |
|
f10IfOut65To127BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 65 to 127 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.19 |
|
f10IfOut128To255BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 128 to 255 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.20 |
|
f10IfOut256To511BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 256 to 511 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.21 |
|
f10IfOut512To1023BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 512 to 1023 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.22 |
|
f10IfOutOver1023BytePkts
The Number of Good Frames sent successfully
whose size was greater than 1023 Bytes. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.23 |
|
f10IfOutThrottles
This counter is incremented when a valid
frame with a length or type field value equal to 0x8808 (Control Frame) is sent. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.24 |
|
f10IfLastDiscontinuityTime
The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local manage… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.25 |
|
f10IfInCentRate
This is the ingress rate in percentage.
This is an integer value which can go from 0 to 100. |
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.26 |
|
f10IfOutCentRate
This is the egress rate in percentage.
This is an integer value which can go from 0 to 100. |
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.6027.3.11.1.2.1.1.27 |