EXTREME-POS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
54

extremeApsGroupConfigTable

table
.1.3.6.1.4.1.1916.1.20.1.1.2 · 1 row entry · 8 columns
Open in standard view 
This table contains configuration information
by defined APS group.
extremeApsGroupConfigEntry entry .1.3.6.1.4.1.1916.1.20.1.1.2.1
Indexes
extremeApsGroupConfigGroupNumber
Column Syntax OID
extremeApsGroupConfigGroupNumber
The group number which uniquely identifies
the APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.1
extremeApsGroupConfigRevertMode
The revertive mode configured for the APS
group. This indicates whether APS will
switch-back automatically after the working
line error is cleared. In non-revertive
mode, manual intervention is required for
switch-bac…
Enumeration
Enumerated Values:
1revertive
2nonRevertive
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.2
extremeApsGroupConfigRevertMinutes
The number of minutes APS will wait after
the error has been cleared before switching
back to the working line. During this
interval, the K1 request will indicate
WTR (wait-to-restore). This field is only
valid in rev…
Integer32
Constraints:
range: 0-12
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.3
extremeApsGroupConfigDirection
The directional mode configured for the
APS group. This indicates whether protection
switches are coordinated between both POS
equipment and ADM (bidirectional) or not
(unidirectional).
Enumeration
Enumerated Values:
1bidirectional
2unidirectional
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.4
extremeApsGroupConfigTimerInterval
The number of seconds between APS out-of-band
peer protocol hello messages. This value is
relevant when the working line and protection
line exist is physically different chassis.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.5
extremeApsGroupConfigTimerMisses
The number of APS out-of-band peer protocol
messages transmitted without receiving a
response before the protection switch declares
the working switch inoperable. When this occurs
the protection switch initiates a line…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.6
extremeApsGroupConfigAuthenticate
When enabled, the authentication string on both
working and protection switches must match.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.7
extremeApsGroupConfigAuthString
If configured, this is the authentication string
that must match between working and protection
switches. This field is relevant if the APS group
is configured to authenticate.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.1916.1.20.1.1.2.1.8

extremeApsPortConfigTable

table
.1.3.6.1.4.1.1916.1.20.1.1.3 · 1 row entry · 3 columns
Open in standard view 
This table contains configuration information
for APS ports.
extremeApsPortConfigEntry entry .1.3.6.1.4.1.1916.1.20.1.1.3.1
Indexes
extremeApsPortConfigGroupNumber extremeApsPortConfigPortNumber
Column Syntax OID
extremeApsPortConfigGroupNumber
The group number which uniquely identifies
the APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.1.3.1.1
extremeApsPortConfigPortNumber
The value of ifIndex that identifies the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.1.3.1.2
extremeApsPortConfigPortType
The port type designation.
Enumeration
Enumerated Values:
1working
2protection
 .1.3.6.1.4.1.1916.1.20.1.1.3.1.3

extremeApsProtectPortConfigTable

table
.1.3.6.1.4.1.1916.1.20.1.1.4 · 1 row entry · 3 columns
Open in standard view 
This table contains configuration information
for APS protection ports.
extremeApsProtectPortConfigEntry entry .1.3.6.1.4.1.1916.1.20.1.1.4.1
Indexes
extremeApsProtectPortConfigGroupNumber extremeApsProtectPortConfigPortNumber
Column Syntax OID
extremeApsProtectPortConfigGroupNumber
The group number which uniquely identifies
the APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.1.4.1.1
extremeApsProtectPortConfigPortNumber
The value of ifIndex that identifies
the protection port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.1.4.1.2
extremeApsProtectPortConfigWorkingIpAddr
The IP address of the working switch. If the
working and protection lines reside on the same
chassis, this IP address will be a local address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1916.1.20.1.1.4.1.3

extremeApsGroupTable

table
.1.3.6.1.4.1.1916.1.20.1.2.1 · 1 row entry · 4 columns
Open in standard view 
This table contains run-time information
by defined APS group.
extremeApsGroupEntry entry .1.3.6.1.4.1.1916.1.20.1.2.1.1
Indexes
extremeApsGroupGroupNumber
Column Syntax OID
extremeApsGroupGroupNumber
The group number which uniquely identifies
the APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.2.1.1.1
extremeApsGroupActivePort
The APS port which is currently carrying the
network traffic.
Enumeration
Enumerated Values:
1working
2protection
 .1.3.6.1.4.1.1916.1.20.1.2.1.1.2
extremeApsGroupEffectiveDirection
The effective directional mode for the APS
group. When this value differs from the
configured directional mode, check the
ADM and switch provisioning for a mis-
configuration.
Enumeration
Enumerated Values:
1bidirectional
2unidirectional
 .1.3.6.1.4.1.1916.1.20.1.2.1.1.3
extremeApsGroupPeerProtoStatus
The APS out-of-band peer protocol status
for a group.
Enumeration
Enumerated Values:
1established
2closed
 .1.3.6.1.4.1.1916.1.20.1.2.1.1.4

extremeApsProtectPortTable

table
.1.3.6.1.4.1.1916.1.20.1.2.2 · 1 row entry · 12 columns
Open in standard view 
This table contains run-time information
by defined APS protection port.
extremeApsProtectPortEntry entry .1.3.6.1.4.1.1916.1.20.1.2.2.1
Indexes
extremeApsProtectPortGroupNumber extremeApsProtectPortPortNumber
Column Syntax OID
extremeApsProtectPortGroupNumber
The group number which uniquely identifies
the APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.1
extremeApsProtectPortPortNumber
The value of ifIndex that identifies
the protection port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.2
extremeApsProtectPortTransmitK1
The K1 overhead byte currently being transmitted
on the indicated protection port.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.3
extremeApsProtectPortTransmitK2
The K2 overhead byte currently being transmitted
on the indicated protection port.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.4
extremeApsProtectPortReceiveK1
The K1 overhead byte currently being received
on the indicated protection port.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.5
extremeApsProtectPortReceiveK2
The K2 overhead byte currently being received
on the indicated protection port.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.6
extremeApsProtectPortSwitchInitByWorking
The number of switches that have been
initiated by the working-line router.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.7
extremeApsProtectPortSwitchInitByProtect
The number of switches that have been
initiated by the protection-line router.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.8
extremeApsProtectPortSwitchInitByADM
The number of switches that have been
initiated by the ADM.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.9
extremeApsProtectPortSwitchInitByCmd
The number of switches that have been
initiated by an external CLI command.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.10
extremeApsProtectPortSuccessfulSwitches
The number of successful APS line switches.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.11
extremeApsProtectPortHelloProtFails
The number of APS out-of-band peer protocol
failures recorded. This situation causes
the protection-line router to initiate a
line switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.2.2.1.12

extremeApsLineErrorTable

table
.1.3.6.1.4.1.1916.1.20.1.3.1 · 1 row entry · 10 columns
Open in standard view 
This table contains APS line error
information.
extremeApsLineErrorEntry entry .1.3.6.1.4.1.1916.1.20.1.3.1.1
Indexes
extremeApsLineErrorGroupNumber extremeApsLineErrorPortNumber
Column Syntax OID
extremeApsLineErrorGroupNumber
The group number which uniquely identifies the
APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.1
extremeApsLineErrorPortNumber
The ifIndex value which identifies the APS port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.2
extremeApsLineErrorSignalDegradeActive
Indicates whether a signal degrade condition
currently exists on the line.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.3
extremeApsLineErrorBERSignalDegradeActive
Indicates whether a signal degrade condition
due to excessive Bit-Error-Rate currently exists
on the line.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.4
extremeApsLineErrorSignalFailActive
Indicates whether a signal fail condition
currently exists on the line.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.5
extremeApsLineErrorBERSignalFailActive
Indicates whether a signal fail condition
due to excessive Bit-Error-Rate currently
exists on the line.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.6
extremeApsLineErrorSignalDegrades
The number of signal degrades that have
been recorded on the line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.7
extremeApsLineErrorBERSignalDegrades
The number of signal degrades due to excessive
Bit-Error-Rate that have been recorded on the
line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.8
extremeApsLineErrorSignalFails
The number of signal fails that have
been recorded on the line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.9
extremeApsLineErrorBERSignalFails
The number of signal fails due to excessive
Bit-Error-Rate that have been recorded on the
line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.1.1.10

extremeApsProtocolErrorTable

table
.1.3.6.1.4.1.1916.1.20.1.3.2 · 1 row entry · 14 columns
Open in standard view 
This table contains APS protocol error
information.  These errors are relevant
for APS protection ports.
extremeApsProtocolErrorEntry entry .1.3.6.1.4.1.1916.1.20.1.3.2.1
Indexes
extremeApsProtocolErrorGroupNumber extremeApsProtocolErrorPortNumber
Column Syntax OID
extremeApsProtocolErrorGroupNumber
The group number which uniquely identifies the
APS group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.1
extremeApsProtocolErrorPortNumber
The ifIndex value which identifies the APS
protection port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.2
extremeApsProtocolErrorModeMismatchDefect
Indicates whether a Mode Mismatch defect currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.3
extremeApsProtocolErrorProtSwitchByteDefect
Indicates whether a Protection Switching Byte defect
currently exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.4
extremeApsProtocolErrorChannelMismatchDefect
Indicates whether a Channel Mismatch defect currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.5
extremeApsProtocolErrorFarEndProtectDefect
Indicates whether a Far-End Protection defect currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.6
extremeApsProtocolErrorModeMismatchFailure
Indicates whether a Mode Mismatch failure currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.7
extremeApsProtocolErrorProtSwitchByteFailure
Indicates whether a Protection Switching Byte failure
currently exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.8
extremeApsProtocolErrorChannelMismatchFailure
Indicates whether a Channel Mismatch failure currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.9
extremeApsProtocolErrorFarEndProtectFailure
Indicates whether a Far-End Protection failure currently
exists on the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.10
extremeApsProtocolErrorModeMismatchNumFails
The number of Mode Mismatch failures that have
been recorded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.11
extremeApsProtocolErrorProtSwitchByteNumFails
The number of Protection Switching Byte failures
that have been recorded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.12
extremeApsProtocolErrorChannelMismatchNumFails
The number of Channel Mismatch failures that have
been recorded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.13
extremeApsProtocolErrorFarEndProtectNumFails
The number of Far-End Protection failures that have
been recorded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.20.1.3.2.1.14