EXTREME-PBQOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
24

extremeQosRuleTable

table
.1.3.6.1.4.1.1916.1.7.2 · 1 row entry · 22 columns
Open in standard view 
Table of QoS policy rules. Entries that duplicate the exact
same set of policy conditions are not allowed.
extremeQosRuleEntry entry .1.3.6.1.4.1.1916.1.7.2.1
Entry in table of QoS policy rules
Indexes
extremeQosRuleIndex
Column Syntax OID
extremeQosRuleIndex
An index into the table of QoS policy pattern
rules. The index for a manager to use for creating
new rows is determined by reading the value of
extremeNextAvailableQosRuleIndex.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.7.2.1.1
extremeQosRuleScope
The scope of conditions in which this rule applies.
The value 'signaled' means that the policy rule is
applied only to QoS signaling messages e.g. RSVP. The
value 'inband' means that the policy rule is applied
only to d…
Enumerationr/w
Enumerated Values:
1any
2signaled
3inband
 .1.3.6.1.4.1.1916.1.7.2.1.2
extremeQosRuleDirection
The direction in which this rule applies. The value
'forward' means that the rule is applied to data streams
in the direction specified by the classification pattern.
The value 'backward' means that the rule is applied …
Enumerationr/w
Enumerated Values:
1any
2forward
3backward
 .1.3.6.1.4.1.1916.1.7.2.1.3
extremeQosRuleInPort
The ifIndex value of the physical switch input port for which
this rule applies. Rules that indicate an individual value
for this object have a lower precedence in ExtremeWare than
rules that specify IP patterns. Conve…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.7.2.1.4
extremeQosRuleInPortMask
The list of physical switch input ports which further
qualifies an IP flow. This object is an octet string
with the MSB of octet 0 indicating port 0 and LSB indicating
port 7. Similarly, the MSB of octet 1 indicates por…
EXTREME-BASE-MIBPortListr/w
Textual Convention: EXTREME-BASE-MIBPortList OctetString
 .1.3.6.1.4.1.1916.1.7.2.1.5
extremeQosRuleDestAddrStart
The start of the destination IP address range for which this
rule applies.If this object has any value other than the
default then this rule takes precedence over any rule that
specifies an individual physical input por…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1916.1.7.2.1.6
extremeQosRuleDestAddrEnd
The end of the destination IP address range for which this
rule applies. If this object has any value other than the
default then this rule takes precedence over any rule that
specifies an individual physical input port…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1916.1.7.2.1.7
extremeQosRuleSrcAddrStart
The start of the source IP address range for which this rule
applies. If this object has any value other than the default
then this rule takes precedence over any rule that specifies
an individual physical input port, …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1916.1.7.2.1.8
extremeQosRuleSrcAddrEnd
The end of the source IP address range for which this rule
applies. If this object has any value other than the default
then this rule takes precedence over any rule that specifies
an individual physical input port, a …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1916.1.7.2.1.9
extremeQosRuleProtocol
The IP protocol number for which this rule applies. If this
object has any value other than 'any' then this rule
takes precedence over any rule that specifies an individual
physical input port, a VLAN or any incoming i…
Enumerationr/w
Enumerated Values:
1any
2udp
3tcp
4other
5tcpPermitEstablished
6icmp
 .1.3.6.1.4.1.1916.1.7.2.1.10
extremeQosRuleDestL4PortStart
The destination starting layer 4 port number that would
be used to match an IP flow. The value of 0 means that all
layer 4 information would be ignored when matching an IP
flow. If this object has any value other than 0…
EXTREME-BASE-MIBL4Portr/w
Textual Convention: EXTREME-BASE-MIBL4Port Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.7.2.1.11
extremeQosRuleSourceL4PortStart
The source starting layer 4 port number that would be
used to match an IP flow. The value of 0 means that all
layer 4 information would be ignored when matching an IP
flow. If this object has any value other than 0 then…
EXTREME-BASE-MIBL4Portr/w
Textual Convention: EXTREME-BASE-MIBL4Port Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.7.2.1.12
extremeQosRuleTosMask deprecated
A mask for the incoming IP Type-of-Service field to be applied
when matching. The value of 0 means that any incoming IP ToS
field is ignored.

Only the default value is supported in ExtremeWare 6.0.
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.7.2.1.13
extremeQosRuleTosMatch deprecated
If the value of the incoming IP Type-of-Service field, after
applying a mask of extremeQosRuleTosMask, is this value then
this rule is applied.

Only the default value is supported in ExtremeWare 6.0.
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.1916.1.7.2.1.14
extremeQosRuleQosProfileIndex
A pointer into the extremeQosProfileTable indicating the
QoS treatment and actions to be applied to traffic matching
this rule. A value of 0 means that this traffic will be
dropped/discarded. The default value is that …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.7.2.1.15
extremeQosRuleOwner
Indicates the identity of the manager that
configured this entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1916.1.7.2.1.16
extremeQosRuleRowStatus
The row status for this QoS rule.

This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1916.1.7.2.1.17
extremeQosRuleDestL4PortEnd
The destination last layer 4 port number that would
determine the l4 port range to match an IP flow. The value
of 0 means that all layer 4 information would be ignored
when matching an IP flow. If this object has any va…
EXTREME-BASE-MIBL4Portr/w
Textual Convention: EXTREME-BASE-MIBL4Port Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.7.2.1.18
extremeQosRuleSourceL4PortEnd
The source last layer 4 port number that would determine
the l4 port range to match an IP flow. The value of 0 means
that all layer 4 information would be ignored when matching
an IP flow. If this object has any value o…
EXTREME-BASE-MIBL4Portr/w
Textual Convention: EXTREME-BASE-MIBL4Port Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.7.2.1.19
extremeQosRulePrecedence
The precedence used to select one rule over potentially
multiple rules that might match an L3/L4 flow. The rule
with highest precedence takes precedence over any rule
that specifies a matching flow, individual physica…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.7.2.1.20
extremeQosRuleCounter SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.7.2.1.21
extremeQosRuleName
A unique Qos rule name. If this is not specified then the system
generates one automatically.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1916.1.7.2.1.22

extremeQosCapabilitiesTable

table
.1.3.6.1.4.1.1916.1.7.3 · 1 row entry · 2 columns
Open in standard view 
Table of per-port QoS policy capabilities. An entry only
exists in this table for ifTable entries representing
physical ports. On a modular system with mixed capability
silicon it is necessary to indicate the QoS capabilities to
a manager.
extremeQosCapabilitiesEntry entry .1.3.6.1.4.1.1916.1.7.3.1
Entry in table of QoS policy capabilities for a given switch
port.
Indexes
No indexes recorded
Column Syntax OID
extremeQosCapMarkIpTosCapable
This port is capable of supporting policies that involve
the changing of IP TOS octet values.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.7.3.1.1
extremeQosCapMatchIpTosCapable
This port is capable of supporting policies that involve
packet classification based on matching of IP TOS octet
values.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.7.3.1.2