EXTREME-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
10

extremeCfmGroupNextIndexTable

table
.1.3.6.1.4.1.1916.1.47.1.1.1 · 1 row entry · 1 columns
Open in standard view 
This object contains an unused value for extremeCfmGroupIndex in
the extremeCfmGroupTable, or a zero to indicate that none exist.
extremeCfmGroupNextIndexEntry entry .1.3.6.1.4.1.1916.1.47.1.1.1.1
The conceptual row of extremeCfmGroupNextIndexTable.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
Column Syntax OID
extremeCfmGroupNextIndex
Value to be used as the index of the Group table entries, for this
Maintenance association End Point Identifier when the management
entity wants to create a new row in that table.
IEEE8021-CFM-MIBDot1afCfmIndexIntegerNextFree
Textual Convention: IEEE8021-CFM-MIBDot1afCfmIndexIntegerNextFree Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.47.1.1.1.1.1

extremeCfmGroupTable

table
.1.3.6.1.4.1.1916.1.47.1.1.2 · 1 row entry · 7 columns
Open in standard view 
This table includes configuration objects and operations for the 
Group function, mainly used by the registered clients like ERPS,EAPS 
to know link detection failure through CFM.
          
Each row in the table represents a Group for the defined MEP. This 
table uses four indices. The first three indices are the indices of 
the Maintenance Domain, MaNet, and MEP tables. The fourth index is the 
specific Group on the selected MEP. A Group is created on an existing MEP 
using extremeCfmGroupIndex in the row creation.
          
Only few objects are writable in this table. 
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.
extremeCfmGroupEntry entry .1.3.6.1.4.1.1916.1.47.1.1.2.1
The conceptual row of extremeCfmGroupTable.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier extremeCfmGroupIndex
Column Syntax OID
extremeCfmGroupIndex
An index to the CFM Groups configuration table which indicates
the specific group associated with a MEP.

extremeCfmGroupTableNextIndex needs to be inspected to find an
available index for row-creation.
…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.1
extremeCfmGroupName
The name of a CFM group.
Group name can have alpha-numeric, '-' and '_'.
It should start with alphabet.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.2
extremeCfmGroupStatus
Whether the group is operational or not.

The status is set based on associated MEP status and is informed to
registered clients.
It is set to 'Up' when the group is operational.
It is set to 'Down' when …
ExtremeCfmGroupOperStatus
Textual Convention: ExtremeCfmGroupOperStatus Enumeration
Type Values:
1down
2up
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.3
extremeCfmMepIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP and hence the group is attached.

Upon a restart of the sys…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.4
extremeCfmGroupRemoteMEPs
Lists the Remote MEPs associated with a group.
Not all Remote MEPs of an MA may be associated with a group.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.5
extremeCfmGroupClients
Lists all the registered clients with a group.
The clients are informed with link failure or recovery through
group status notifications.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.6
extremeCfmGroupRowStatus
The status of the row.
All columns must have a valid value before a row can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1916.1.47.1.1.2.1.7

extremeCfmGroupMepDbTable

table
.1.3.6.1.4.1.1916.1.47.1.1.3 · 1 row entry · 2 columns
Open in standard view 
The group Remote MEP Database. A database, maintained by every group, that
maintains information about other MEPs in that group.
extremeCfmGroupMepDbEntry entry .1.3.6.1.4.1.1916.1.47.1.1.3.1
The Group Remote MEP Database table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier extremeCfmGroupIndex extremeCfmGroupMepDbRMepId
Column Syntax OID
extremeCfmGroupMepDbRMepId
Maintenance association End Point Identifier of a remote MEP
whose information from the group MEP Database is to be returned.
IEEE8021-CFM-MIBDot1agCfmMepId
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepId Unsigned32
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.1916.1.47.1.1.3.1.1
extremeCfmGroupMepDbRowStatus
The status of the row.
All columns must have a valid value before a row can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1916.1.47.1.1.3.1.2