ES4524D-MIB Table View

Table of descriptive and status information about
the switch units in this system.

Table about the status of individual powers.

The fan status table.

Table of descriptive and status information about
the switch modules in this system.

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

Table describing the configuration and status of each
trunk.

Table for LACP port configuration.

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

The instance table for the Multiple Spanning Tree region

The Multiple Spanning Tree region instance vlan mapped table.

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

A table that contains the settings of RSPAN.

Table for current router ports.

Table for static router ports.

Table for current multicast addresses.

Table for static multicast addresses.

Table for enabling or disabling IGMP snooping per VLAN.

The table for configuring the IGMP snooping profile.

The table for configuring the range of the IGMP snooping profile.

Table for port configuration in IGMP filtering.

Table for port configuration in IGMP throttling.

A table of netConfigEntry.

A table of netConfigEntry.

A table of netConfigEntry.

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g., for the management VLAN), or
may have many entries(e.g., for all ports, or for all
static VLANs).

a list of general prefix entries.

Table to manage the control of broadcast storms for ports.

Table for VLAN configuration.

Table for port configuration in VLAN.

Table for port configuration in 802.1Q Tunneling.

The extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s).

Table for IP precedence priority mapping.

Table for IP DSCP priority mapping.

Table for IP port priority mapping.

Table for per port weighted round robin (WRR).

A list of trap destination entries.

Table for rate limit of each port.

Table for differentiated services on each port.

Table for policy map.

Table for policy map element.

Table for class map.

Table for ACL.

Table for IP ACE.