ES3528-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

143

Rows

143

Columns

683

switchInfoTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.3 · 1 row entry · 16 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.4

swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.5

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.10

swExpansionSlot1

Type of expansion module in this switch slot 1.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.11

swExpansionSlot2

Type of expansion module in this switch slot 2.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.12

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.15

swExpectedModuleOpCodeVer

The module opcode version reside in the switch, note that
this variable represent the desired version of the
module which might plug in. For version validation, only
the swExpectedModuleOpCodeVer of the master
is used…

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.8.2.1.1.1.3.1.16

switchIndivPowerTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.6 · 1 row entry · 4 columns

Open in standard view

Table about the status of individual powers.

switchIndivPowerEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.6.1

Table about the status of individual power.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column Syntax OID

swIndivPowerUnitIndex

This is defined as swUnitIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.6.1.1

swIndivPowerIndex

1 means internal power, 2 means external power.

Enumeration

Enumerated Values:

1	internalPower
2	externalPower

.1.3.6.1.4.1.259.8.2.1.1.1.6.1.2

swIndivPowerStatus

notPresent(1) means not present, green(2) means
up, red(3) means down.

Enumeration

Enumerated Values:

1	notPresent
2	green
3	red

.1.3.6.1.4.1.259.8.2.1.1.1.6.1.3

swIndivPowerType

These parameters indicate the power type used by the module.
The value dc-n48(1) means that the power module uses DC-N48 as power input.
The value dc-p27(2) means that the power module uses DC-P27 as power input.
The va…

Enumeration

Enumerated Values:

1	dc-n48
2	dc-p27
3	ac
4	dc-n48-wrong
5	dc-p27-wrong
6	none
7	ac-wrong

.1.3.6.1.4.1.259.8.2.1.1.1.6.1.4

switchFanTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.9 · 1 row entry · 6 columns

Open in standard view

The fan status table.

switchFanEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.9.1

A conceptual row of the switchFanTable.

Indexes

switchUnitIndex switchFanIndex

Column Syntax OID

switchUnitIndex

The unit of the switch for the stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.1

switchFanIndex

The unit number of the fan.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.2

switchFanStatus

Indicating the status of the fan, 1:ok; 2:failure.

Enumeration

Enumerated Values:

1	ok
2	failure

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.3

switchFanAdminSpeed

The speed of the fan, measured in rpm (rotations per
minute). Set this object to 0 to enter auto mode,
set to other values to enter manual mode.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.4

switchFanFailureCount

The total failure count of the fan since the switch
has reboot.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.5

switchFanOperSpeed

The operational value of the fan speed, measured in rpm (rotations per
minute).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.9.1.6

switchThermalTempTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.11 · 1 row entry · 3 columns

Open in standard view

The table which collects temperature infomration of the 
switch.

switchThermalTempEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.11.1

A conceptual row of the switchThermalTempTable.

Indexes

switchThermalTempUnitIndex switchThermalTempThermalIndex

Column	Syntax	OID
switchThermalTempUnitIndex The unit of the switch for stackable device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.1.11.1.1`
switchThermalTempThermalIndex The thermal index of the switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.1.11.1.2`
switchThermalTempValue The temperature value in the device in grade Celsius.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.1.11.1.3`

switchThermalActionTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.12 · 1 row entry · 7 columns

Open in standard view

The table for configuring the thermal action.

switchThermalActionEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.12.1

A conceptual row of the switchThermalActionTable.

Indexes

switchThermalActionUnitIndex switchThermalActionThermalIndex switchThermalActionIndex

Column Syntax OID

switchThermalActionUnitIndex

The unit of the switch for stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.1

switchThermalActionThermalIndex

The thermal index of the switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.2

switchThermalActionIndex

The action index of the switchTheramlActionTable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.3

switchThermalActionRisingThreshold

The rising threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.4

switchThermalActionFallingThreshold

The falling threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.5

switchThermalActionAction

The action that will be taken when the
temperature exceeds the rising threshold
or falls below the falling threshold.

Bitsr/w

Enumerated Values:

trap

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.6

switchThermalActionStatus

Set valid(1) to create an entry, Set Invalid(2) to delete an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.1.12.1.7

switchModuleInfoTable

table

.1.3.6.1.4.1.259.8.2.1.1.1.13 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch modules in this system.

switchModuleInfoEntry entry .1.3.6.1.4.1.259.8.2.1.1.1.13.1

Table providing descriptions and status information for
switch modules.

Indexes

swModuleUnitIndex swModuleModuleIndex

Column Syntax OID

swModuleUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.1

swModuleModuleIndex

This object identifies the module within the switch
for which this entry contains information.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.2

swModuleHardwareVer

Hardware version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.3

swModuleMicrocodeVer

Microcode version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.4

swModuleLoaderVer

Loader version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.5

swModuleBootRomVer

Boot ROM code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.6

swModuleOpCodeVer

Operation code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.7

swModulePortNumber

The number of ports of this module.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.8

swModuleSerialNumber

Serial number of the module.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.9

swModuleType

Type of module.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.10

swModuleModelNumber

Model number of the module.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.11

swModuleEpldVer

The EPLD version of the module.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.12

swModuleDescr

A textual description of the entity to describe the
module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.8.2.1.1.1.13.1.13

portTable

table

.1.3.6.1.4.1.259.8.2.1.1.2.1 · 1 row entry · 12 columns

Open in standard view

Table of descriptive and status information describing 
the configuration of each switch port. This table also 
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.259.8.2.1.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode
11	thousandBaseCX
12	tenG

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and hal…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	portCap10gHalf
7	portCap10gFull
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently conf…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

Enumerated Values:

1	none
2	copperForced
3	copperPreferredAuto
4	sfpForced
5	sfpPreferredAuto

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.12

portMdixMode

This parameter can be configured to auto(1), which means the
connection mode will be auto detected; straight(2), which means
the connection is used the straight-through twisted pair cabling;
and crossover(3), which mean…

Enumerationr/w

Enumerated Values:

1	auto
2	straight
3	crossover

.1.3.6.1.4.1.259.8.2.1.1.2.1.1.14

portPacketFilterTable

table

.1.3.6.1.4.1.259.8.2.1.1.2.5 · 1 row entry · 3 columns

Open in standard view

Configure to filter some special packets.

portPacketFilterEntry entry .1.3.6.1.4.1.259.8.2.1.1.2.5.1

Configure to filter some special packets.

Indexes

portPacketFilterIfIndex

Column Syntax OID

portPacketFilterIfIndex

The port interface of the portPacketFilterTable. The
interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.2.5.1.1

portPacketFilterCdpStatus

Whether CDP paket filtering is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.2.5.1.2

portPacketFilterPvstStatus

Whether PVST paket filtering is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.2.5.1.3

portVlanTrunkingTable

table

.1.3.6.1.4.1.259.8.2.1.1.2.7 · 1 row entry · 2 columns

Open in standard view

Configures vlan trunking feature.

portVlanTrunkingEntry entry .1.3.6.1.4.1.259.8.2.1.1.2.7.1

Configures vlan trunking feature.

Indexes

portVlanTrunkingIfIndex

Column Syntax OID

portVlanTrunkingIfIndex

The port and trunk interface of the portVlanTrunkingTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.2.7.1.1

portVlanTrunkingStatus

Whether vlan trunking is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.2.7.1.2

trunkTable

table

.1.3.6.1.4.1.259.8.2.1.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each 
trunk.

trunkEntry entry .1.3.6.1.4.1.259.8.2.1.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.8.2.1.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.259.8.2.1.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.2 · 1 row entry · 15 columns

Open in standard view

The table manages port settings for Spanning Tree 
Protocol 802.1d, 802.1w or 802.1s depending on the 
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.4

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.11

staPortBpduFlooding

This parameter is used to configure the capability of BPDUs
flooding.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.12

staPortRootGuardAdminStatus

Specifies the desired status of the root guard. This variable configures the root
guard feature to enforce the root bridge placement in the network.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.13

staPortRootGuardOperStatus

The current operational status of the root guard which provides a
way to enforce the root bridge placement in the network.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.14

staPortBpduGuard

A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.15

staPortAdminEdgePortWithAuto

The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port a…

Enumerationr/w

Enumerated Values:

1	true
2	false
3	auto

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.16

staPortBpduFilter

The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid trans…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.2.1.17

xstInstanceCfgTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific 
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root iden…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the p…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the …

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related …

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

StaPathCostMode

Textual Convention: StaPathCostMode Enumeration

Type Values:

1	short
2	long

.1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.6.5 · 1 row entry · 11 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active li…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.5

xstInstancePortDesignatedRoot

The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.9

xstInstancePortDesignatedPort

The port identifier of the port on the designated
bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the learning state to the forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.12

xstInstancePortAdminPathCost

The admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster me…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.13

xstInstancePortOperPathCost

The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attac…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.14

mstInstanceEditTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.6.6 · 1 row entry · 6 columns

Open in standard view

The instance table for the Multiple Spanning Tree region

mstInstanceEditEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceEditIndex

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.1`
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.2`
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.3`
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.4`
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.5`
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.6`

mstInstanceOperTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.6.7 · 1 row entry · 5 columns

Open in standard view

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceOperIndex

Column	Syntax	OID
mstInstanceOperIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.1`
mstInstanceOperVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.2`
mstInstanceOperVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.3`
mstInstanceOperVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.4`
mstInstanceOperVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.5`

staLoopbackDetectionPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.5.7 · 1 row entry · 5 columns

Open in standard view

A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk

staLoopbackDetectionPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.5.7.1

A conceptual row of staLoopbackDetectionPortTable.

Indexes

staLoopbackDetectionPortIfIndex

Column Syntax OID

staLoopbackDetectionPortIfIndex

The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.5.7.1.1

staLoopbackDetectionPortStatus

Status of the port on whether spanning tree loopback detection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.7.1.2

staLoopbackDetectionPortTrapStatus

The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.5.7.1.3

staLoopbackDetectionPortReleaseMode

Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manu…

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.259.8.2.1.1.5.7.1.4

staLoopbackDetectionPortRelease

Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noRelease
2	release

.1.3.6.1.4.1.259.8.2.1.1.5.7.1.5

mirrorTable

table

.1.3.6.1.4.1.259.8.2.1.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.259.8.2.1.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.259.8.2.1.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.8.2.1.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.8.2.1.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.8.2.1.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopR…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.8.2.1.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.8.2.1.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.8.2.1.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.8.2.1.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.8.2.1.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.9.11.1.4

igmpSnoopCurrentVlanTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.14 · 1 row entry · 2 columns

Open in standard view

Table for enabling or disabling IGMP snooping per VLAN.

igmpSnoopCurrentVlanEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.14.1

Entry for enabling or disabling IGMP snooping.

Indexes

igmpSnoopCurrentVlanIndex

Column Syntax OID

igmpSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.14.1.1

igmpSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.9.14.1.3

igmpSnoopProfileTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the IGMP snooping profile.

igmpSnoopProfileEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.18.1

The entry for configuring the IGMP snooping profile.

Indexes

igmpSnoopProfileId

Column Syntax OID

igmpSnoopProfileId

The ID of the IGMP snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.18.1.1

igmpSnoopProfileAction

The access mode of the IGMP snooping profile.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.8.2.1.1.9.18.1.2

igmpSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.9.18.1.3

igmpSnoopProfileRangeTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the IGMP snooping profile.

igmpSnoopProfileRangeEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.20.1

The entry for configuring the range of the IGMP snooping profile.

Indexes

igmpSnoopProfileRangeProfileId igmpSnoopProfileRangeInetAddressType igmpSnoopProfileRangeStartInetAddress

Column Syntax OID

igmpSnoopProfileRangeProfileId

This is defined as igmpSnoopProfileId.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.20.1.1

igmpSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv4(1) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.8.2.1.1.9.20.1.2

igmpSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.9.20.1.3

igmpSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.9.20.1.4

igmpSnoopProfileRangeAction

The access mode of the IGMP snooping profile.

Enumeration

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.8.2.1.1.9.20.1.5

igmpSnoopFilterPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in IGMP filtering.

igmpSnoopFilterPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.21.1

Entry for port configuration in IGMP filtering.

Indexes

igmpSnoopFilterPortIndex

Column	Syntax	OID
igmpSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.8.2.1.1.9.21.1.1`
igmpSnoopFilterPortProfileId The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.9.21.1.2`

igmpSnoopThrottlePortTable

table

.1.3.6.1.4.1.259.8.2.1.1.9.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in IGMP throttling.

igmpSnoopThrottlePortEntry entry .1.3.6.1.4.1.259.8.2.1.1.9.22.1

Entry for port configuration in IGMP throttling.

Indexes

igmpSnoopThrottlePortIndex

Column Syntax OID

igmpSnoopThrottlePortIndex

The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.9.22.1.1

igmpSnoopThrottlePortRunningStatus

Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.9.22.1.2

igmpSnoopThrottlePortAction

The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to t…

Enumerationr/w

Enumerated Values:

1	replace
2	deny

.1.3.6.1.4.1.259.8.2.1.1.9.22.1.3

igmpSnoopThrottlePortMaxGroups

The maximum number of IGMP groups that the interface can join.

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.8.2.1.1.9.22.1.4

igmpSnoopThrottlePortCurrentGroups

The current number of IGMP groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.9.22.1.5

netConfigTable

table

.1.3.6.1.4.1.259.8.2.1.1.10.1 · 1 row entry · 6 columns

Open in standard view

A table of netConfigEntry.

netConfigEntry entry .1.3.6.1.4.1.259.8.2.1.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column Syntax OID

netConfigIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.1

netConfigIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.2

netConfigSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure o…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.3

netConfigPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.4

netConfigUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.5

netConfigStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.10.1.1.6

vlanTable

table

.1.3.6.1.4.1.259.8.2.1.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.259.8.2.1.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.259.8.2.1.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.12.2 · 1 row entry · 4 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRID…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to dot1q-tunnel(4) sets a 802.1Q tunnel link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
4	dot1q-tunnel

.1.3.6.1.4.1.259.8.2.1.1.12.2.1.2

vlanPortDot1qEtherType

tpid for 802.1Q encapsulation. Used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.12.2.1.4

vlanPortDot1qAddressMonitorMode

Whether address monitor for SBC mamnagment VLANs is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.12.2.1.5

vlanL2ProtocolTunnelPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.12.16 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in Layer 2 Protocol
Tunneling.

vlanL2ProtocolTunnelPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.12.16.1

Entry for port configuration in Layer 2 Protocol
Tunneling.

Indexes

vlanL2ptPortIndex

Column Syntax OID

vlanL2ptPortIndex

The port and the trunk (excluding trunk members) interface
of the portTable. The interface identified by a particular
value of this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.12.16.1.1

vlanL2ptPortSta

Set enabled(1) to enable Layer 2 protocol tunneling for
spanning-tree protocol. Set disabled(2) to disable Layer 2
protocol tunneling for spanning-tree protocol.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.12.16.1.2

vlanL2ptPortCdp

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco Discovery Protocol. Set disabled(2) to disable
Layer 2 protocol tunneling for Cisco Discovery Protocol.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.12.16.1.4

vlanL2ptPortVtp

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco VTP. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco VTP.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.12.16.1.5

vlanL2ptPortPvst

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco PVST+. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco PVST+.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.12.16.1.6

prioIpPrecTable

table

.1.3.6.1.4.1.259.8.2.1.1.13.2 · 1 row entry · 3 columns

Open in standard view

Table for IP precedence priority mapping.

prioIpPrecEntry entry .1.3.6.1.4.1.259.8.2.1.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.13.2.1.2`
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.13.2.1.3`
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue a…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.13.2.1.4`

prioIpDscpTable

table

.1.3.6.1.4.1.259.8.2.1.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.259.8.2.1.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.13.4.1.1`
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.259.8.2.1.1.13.4.1.2`
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hard…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.13.4.1.3`

prioIpPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.13.7 · 1 row entry · 4 columns

Open in standard view

Table for IP port priority mapping.

prioIpPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column Syntax OID

prioIpPortPhysPort

The port or the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.13.7.1.1

prioIpPortValue

IP port for this value.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.13.7.1.2

prioIpPortCos

Class of service for this entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.13.7.1.3

prioIpPortStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.13.7.1.4

prioWrrPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.13.12 · 1 row entry · 3 columns

Open in standard view

Table for per port weighted round robin (WRR).

prioWrrPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column	Syntax	OID
prioWrrPortIfIndex The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.13.12.1.1`
prioWrrPortTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.13.12.1.2`
prioWrrPortWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.259.8.2.1.1.13.12.1.3`

trapDestTable

table

.1.3.6.1.4.1.259.8.2.1.1.14.1 · 1 row entry · 5 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.259.8.2.1.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column Syntax OID

trapDestAddress

The address to send traps.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.14.1.1.1

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.259.8.2.1.1.14.1.1.2

trapDestStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.14.1.1.3

trapDestVersion

Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.259.8.2.1.1.14.1.1.4

trapDestUdpPort

Determines the UDP port number that the trap will be sent to.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.14.1.1.5

rateLimitPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.1.2 · 1 row entry · 5 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.1

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.7

rlPortInputLimitInKilo

Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.
For a 10 Gbps port, the range is 64 to 10000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.10

rlPortOutputLimitInKilo

Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.
For a 10 Gbps port, the range is 64 to 10000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.11

rateLimitCosPrioTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.1.5 · 1 row entry · 3 columns

Open in standard view

Table for the rate limit, per port, per Class of Service priority.

rateLimitCosPrioEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.1.5.1

Entry for the rate limit, per port, per Class of Service priority.

Indexes

rateLimitCosPrioIfIndex rateLimitCosPrioValue

Column	Syntax	OID
rateLimitCosPrioIfIndex The port that the rate limit function is performed.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.1`
rateLimitCosPrioValue The Class of Service priority value.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.2`
rateLimitCosPrioRateLimitValue The rate limit value of the Class of Service priority. If the value equals 0, it means that the rate limit function is disabled.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.3`

markerTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.2.1 · 1 row entry · 7 columns

Open in standard view

The marker table.

markerEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1

Entry for marker table.

Indexes

markerIfIndex markerAclName

Column Syntax OID

markerIfIndex

The interface index of the marker table.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.1

markerAclName

The name of an ACL. Within a feature a unique
name is used to identify the list to which
the entry belongs in the device.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.2

markerActionBitList

The marker action bit list,
in right to left order.
for example:
0x3(11 in binary) means dscp(0) and precedence(1)
0x4(100 in binary) means priority(2).

Bitsr/w

Enumerated Values:

0	dscp
1	precedence
2	priority

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.3

markerDscp

The DSCP value of the marker entry.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.4

markerPrecedence

The precedence value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.5

markerPriority

The priority value of the marker entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.6

markerStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.7

prioAclToCosMappingTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.3.1 · 1 row entry · 4 columns

Open in standard view

Table for ACL to CoS Mapping.

prioAclToCosMappingEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.3.1.1

Entry for ACL to CoS Mapping.

Indexes

prioAclToCosMappingIfIndex prioAclToCosMappingAclName

Column Syntax OID

prioAclToCosMappingIfIndex

The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.1

prioAclToCosMappingAclName

The name of an IP ACL. Within a feature a unique name is
used to identify the list to which the entry belongs
in the device.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.2

prioAclToCosMappingCosValue

CoS value of the prioAclToCosMappingTable.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.3

prioAclToCosMappingStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.4

diffServClfrExtTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.1 · 1 row entry · 2 columns

Open in standard view

The conceptual table of diffServClfrExtEntry.

diffServClfrExtEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.1.1

The conceptual row for diffServClfrExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
diffServClfrExtName The policy-map name.	OctetStringr/w Constraints: `range: 0-16`	`.1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.1`
diffServClfrExtDesc The description of policy-map.	OctetStringr/w Constraints: `range: 0-64`	`.1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.2`

diffServClassMapTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.3 · 1 row entry · 5 columns

Open in standard view

The conceptual table of diffServClassMapEntry.

diffServClassMapEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1

The conceptual row for diffServClassMapTable.

Indexes

diffServClassMapId

Column Syntax OID

diffServClassMapId

An index that enumerates the Class Map entries.
Managers obtain new values for row creation in this table
by reading diffServClassMapNextFree.

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.1

diffServClassMapName

The class-map name.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.2

diffServClassMapDesc

The description of class-map.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.3

diffServClassMapType

The class-map type.

Enumerationr/w

Enumerated Values:

1	matchAll
2	matchAny

.1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.4

diffServCalssMapStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.5

diffServClassMapElementTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.5 · 1 row entry · 3 columns

Open in standard view

The conceptual table of diffServClassMapElementEntry.

diffServClassMapElementEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.5.1

The conceptual row for diffServClassMapElementTable.

Indexes

diffServClassMapId diffServClassMapElementId

Column Syntax OID

diffServClassMapElementId

An index that enumerates the Class Map Element entries.
Managers obtain new values for row creation in this table by
reading diffServClfrElementNextFree.

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.1

diffServClassMapElementSpecific

A pointer to a valid entry in another table, filter table,
that describes the applicable classification parameters.

This RowPointer should point to an instance of one of:
diffServMultiFieldClfrEntry, dif…

SNMPv2-TCRowPointerr/w

Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier

.1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.2

diffServClassMapElementStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.3

diffServMultiFieldClfrExtTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.6 · 1 row entry · 3 columns

Open in standard view

The conceptual table of diffServMultiFieldClfrExtEntry.

diffServMultiFieldClfrExtEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.6.1

The conceptual row for diffServMultiFieldClfrExtTable.

Indexes

No indexes recorded

Column Syntax OID

diffServMultiFieldClfrExtType

Indicates the current type of the multi filed entry. This is a
bit-map of possible conditions. The various bit
positions are:

0: dscp.
1: ipPrecedence.
2: vid

Bitsr/w

Enumerated Values:

0	dscp
1	ipPrecedence
2	vid

.1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.1

diffServMultiFieldClfrExtVid

The VLAN ID to match against the packet's VLAN ID.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.2

diffServMultiFieldClfrExtIpPrecedence

The IP precedence value to match against the packet's IP precedence value.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.3

diffServToSMarkActTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.7 · 1 row entry · 1 columns

Open in standard view

The conceptual table of diffServToSMarkActEntry.

diffServToSMarkActEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.7.1

The conceptual row for diffServToSMarkActTable.

Indexes

diffServToSMarkActToS

Column	Syntax	OID
diffServToSMarkActToS The ToS value referenced by a diffServActionSpecific attribute.	Integer32 Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.8.2.1.1.16.4.7.1.1`

diffServDot1pMarkActTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.4.8 · 1 row entry · 1 columns

Open in standard view

The conceptual table of diffServDot1pMarkActEntry.

diffServDot1pMarkActEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.4.8.1

The conceptual row for diffServDot1pMarkActTable.

Indexes

diffServDot1pMarkActDot1p

Column	Syntax	OID
diffServDot1pMarkActDot1p The Dot1p value referenced by a diffServActionSpecific attribute.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.16.4.8.1.1`

vlanBasedPrioTable

table

.1.3.6.1.4.1.259.8.2.1.1.16.5.1 · 1 row entry · 4 columns

Open in standard view

Table for vlan based priority.

vlanBasedPrioEntry entry .1.3.6.1.4.1.259.8.2.1.1.16.5.1.1

Entry for vlan based priority.

Indexes

vlanBasedPrioIfindex vlanBasedPrioVlanIndex

Column Syntax OID

vlanBasedPrioIfindex

The specified port or trunk for vlan based priority.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.1

vlanBasedPrioVlanIndex

The vlan which this port joins in.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.2

vlanBasedPrioPriority

The priority of the specified vlan traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.3

vlanBasedPrioStatus

The status of the vlan based entry. Valid(1) means the
entry is existent.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.4

portSecPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will b…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the n…

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.4

radiusServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.4.7 · 1 row entry · 8 columns

Open in standard view

The table for RADIUS server.

radiusServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1

The conceptual row for radiusServerTable.

Indexes

radiusServerIndex

Column Syntax OID

radiusServerIndex

The RADIUS server index in the table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.1

radiusServerAddress

IP address of a RADIUS server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.2

radiusServerAuthPortNumber

Authentication port number of RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.3

radiusServerAcctPortNumber

Accounting port number of RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.4

radiusServerKey

Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.5

radiusServerRetransmit

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.6

radiusServerTimeout

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.7

radiusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.8

tacacsPlusServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.5.4 · 1 row entry · 7 columns

Open in standard view

The table for TACACS+ server.

tacacsPlusServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1

The conceptual row for tacacsPlusServerTable.

Indexes

tacacsPlusServerIndex

Column Syntax OID

tacacsPlusServerIndex

TACACS+ server index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.1

tacacsPlusServerAddress

IP address of a TACACS+ server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.2

tacacsPlusServerPortNumber

TCP port number of a TACACS+ server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.3

tacacsPlusServerKey

The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.4

tacacsPlusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.8

tacacsPlusServerRetransmit

The maximum number of retransmissions for TACACS+.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.9

tacacsPlusServerTimeout

Timeout for TACACS+.

secondsInteger32r/w

Constraints:
range: 1-540

.1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.10

sshConnInfoTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.3

sshConnStatus

The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start Sta…

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.7

sshConnEncryptionTypeStr

The encryption type of the SSH.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.8

sshUserTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.6.29 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column Syntax OID

sshUserName

User Name.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.9

sshUserDsaKey1

The DSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.10

sshUserDsaKey2

The DSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.11

sshUserDsaKey3

The DSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.12

sshUserDsaKey4

The DSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.13

sshUserDsaKey5

The DSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.14

sshUserDsaKey6

The DSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.15

sshUserDsaKey7

The DSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.16

sshUserDsaKey8

The DSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.17

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA an…

Enumerationr/w

Enumerated Values:

1	noDel
2	delRsaKey
3	delDsaKey
4	delBothKeys

.1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.18

aclIpAceTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.1 · 1 row entry · 23 columns

Open in standard view

The conceptual table of all of aclIpAceEntry.

aclIpAceEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1

The conceptual row for aclIpAceTable.

Indexes

aclIpAceName aclIpAceIndex

Column Syntax OID

aclIpAceName

The name of an ACL. Within a feature a unique
name is used to identify
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.1

aclIpAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.2

aclIpAcePrecedence

Specifies the IP precedence value to be matched against.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1).

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.3

aclIpAceAction

Indicates the action to be taken if a packet matches this ACE.
This object cannot not be configured when the status of the
entry, aclIpAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.4

aclIpAceSourceIpAddr

The specified source IP address. The packet's source address is
AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be conf…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.5

aclIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's destination
address is AND-ed with the value of aclIpAceSourceIpAddr and then
compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.6

aclIpAceDestIpAddr

The specified destination IP address.
The packet's destination address is
AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.7

aclIpAceDestIpAddrBitmask

The specified destination IP address mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.8

aclIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet. The object=256, means 'any'

For exa…

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.9

aclIpAcePrec

Specifies the IP precedence value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAceP…

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.10

aclIpAceTos

Specifies the IP ToS facility value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAc…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.11

aclIpAceDscp

Specifies the DSCP value to be matched against.
This object cannot be configured when the status of the
entry, aclIpAceStatus, is active(1).
The value of this object is ignored whenever the value of
aclIpAcePrec obje…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.12

aclIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.13

aclIpAceMinSourcePort

If the aclIpAceSourcePortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.14

aclIpAceMaxSourcePort

If the aclIpAceSourcePortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.15

aclIpAceSourcePortBitmask

If the aclIpAceSourcePortOp is equal(2),
this indicates the bitmask of the aclIpAceMinSourcePort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.16

aclIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value, means that no
comparison is to be made with the destination TCP/UDP port
number.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.17

aclIpAceMinDestPort

If the aclIpAceDestPortOp is range(3),
this indicates the lower bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.18

aclIpAceMaxDestPort

If the aclIpAceDestPortOp is range(3),
this indicates the upper bound of the TCP/UDP port number value range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.19

aclIpAceDestPortBitmask

If the aclIpAceDestPortOp is equal(2),
this indicates the bitmask of the aclIpAceMinDestPort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.20

aclIpAceControlCode

Indicates how the control flags of TCP packets are to be compared.
aceIpControlCode is AND-ed with aceIpControlCodeBitmask.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.21

aclIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be compared.
It can be used to check multiple flags of the
FIN, SYN, RST, PSH, ACK, URG by the sum of
FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.22

aclIpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.23

aclMacAceTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.2 · 1 row entry · 16 columns

Open in standard view

The conceptual table of all of aclMacAceEntry.

aclMacAceEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1

The conceptual row for aclMacAceTable.

Indexes

aclMacAceName aclMacAceIndex

Column Syntax OID

aclMacAceName

The name of an ACL. Within a feature, a unique
name is used to identify
the list to which the entry belongs in the device.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.1

aclMacAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.2

aclMacAcePrecedence

Specifies the entry's precedence.

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.3

aclMacAceAction

Indicates the action to be taken if a packet matches this ACE.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.4

aclMacAcePktformat

Used to check the packet format of the packets.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.5

aclMacAceSourceMacAddr

Indicates the 48-bit destination MAC address.
The specified source MAC of the packet The packet's source MAC
address is AND-ed with the value of aceMacSourceMacAddrBitmask
and then compared against the value of this …

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.6

aclMacAceSourceMacAddrBitmask

The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.7

aclMacAceDestMacAddr

Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is
AND-ed with the value of aceMacDestMacAddrBitmask and then compared
against the value …

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.8

aclMacAceDestMacAddrBitmask

The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.9

aclMacAceVidOp

Indicates how a packet's vid is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.10

aclMacAceMinVid

Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.11

aclMacAceVidBitmask

The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.12

aclMacAceEtherTypeOp

Indicates how a packet's ethertype is
to be compared.
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.14

aclMacAceEtherTypeBitmask

The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.15

aclMacAceMinEtherType

Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3).
This object cannot be configured when the status of the
entry, aclMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.16

aclMacAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.18

aclAclGroupTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.3 · 1 row entry · 5 columns

Open in standard view

The conceptual table of aclAclGroupEntry.

aclAclGroupEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1

The conceptual row for aclAclGroupTable.

Indexes

aclAclGroupIfIndex

Column	Syntax	OID
aclAclGroupIfIndex The interface number specifying the ACL binding to.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.1`
aclAclGroupIngressIpAcl Specifies the ingress IP ACL(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.2`
aclAclGroupEgressIpAcl Specifies the egress IP ACL(standard or extended) binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.3`
aclAclGroupIngressMacAcl Specifies the ingress MAC ACL binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.4`
aclAclGroupEgressMacAcl Specifies the egress MAC ACL binding to the interface.	OctetStringr/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.5`

aclIngressIpMaskTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.4 · 1 row entry · 12 columns

Open in standard view

The conceptual table of aclIngressIpMaskEntry.

aclIngressIpMaskEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1

The conceptual row for aclIngressIpMaskTable.

Indexes

aclIngressIpMaskIndex

Column Syntax OID

aclIngressIpMaskIndex

Indicates the bitmask of the source IP address. The relative
bitmask must be created before the ACE binds to the interface.
This object cannot be configured when the status of the
entry, aclIngressIpMaskStatus, is act…

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.1

aclIngressIpMaskPrecedence

Indicates whether to check the IP precedence against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured
…

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.2

aclIngressIpMaskIsEnableTos

Indicates whether to check the IP ToS facility against the packets,
The relative bitmask must be created before the
ACE binds to the interface in ingress direction.
This object cannot be configured when the status of t…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.3

aclIngressIpMaskIsEnableDscp

Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
ent…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.4

aclIngressIpMaskIsEnablePrecedence

Indicates whether to check the IP precednce against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of th…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.5

aclIngressIpMaskIsEnableProtocol

Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of the…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.6

aclIngressIpMaskSourceIpAddrBitmask

Indicates the source IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of th…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.7

aclIngressIpMaskDestIpAddrBitmask

Indicates the destination IP bitmask to check against the packets,
The relative bitmask must be created before the ACE
binds to the interface in ingress direction.
This object cannot be configured when the status of…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.8

aclIngressIpMaskSourcePortBitmask

Indicates the source port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.9

aclIngressIpMaskDestPortBitmask

Indicates the destination port bitmask to check against the TCP/UDP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the s…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.10

aclIngressIpMaskControlCodeBitmask

Indicates the control code bitmask to check against the TCP packets,
The relative bitmask must be created before
the ACE binds to the interface in ingress direction.
This object cannot be configured when the status of…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.11

aclIngressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.12

aclEgressIpMaskTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.5 · 1 row entry · 12 columns

Open in standard view

The conceptual table of aclEgressIpMaskEntry.

aclEgressIpMaskEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1

The conceptual row for aclEgressIpMaskTable.

Indexes

aclEgressIpMaskIndex

Column Syntax OID

aclEgressIpMaskIndex

The index of a mask entry within a mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.1

aclEgressIpMaskPrecedence

The created precedence of an mask entry within the mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.2

aclEgressIpMaskIsEnableTos

Indicates whether to check the IP ToS facility against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of th…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.3

aclEgressIpMaskIsEnableDscp

Indicates whether to check the IP DSCP against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
entr…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.4

aclEgressIpMaskIsEnablePrecedence

Indicates whether to check the IP precedence against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.5

aclEgressIpMaskIsEnableProtocol

Indicates whether to check the IP protocol against the packets.
The relative bitmask must be created before the ACE binds to
the interface in egress direction.
This object cannot be configured when the status of the
e…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.6

aclEgressIpMaskSourceIpAddrBitmask

Indicates the source IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of the
ent…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.7

aclEgressIpMaskDestIpAddrBitmask

Indicates the destination IP bitmask to check against the packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of th…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.8

aclEgressIpMaskSourcePortBitmask

Indicates the source port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.9

aclEgressIpMaskDestPortBitmask

Indicates the destination port bitmask to check against the TCP/UDP packets.
The relative bitmask must be created before
the ACE binds to the interface in egress direction.
This object cannot be configured when the s…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.10

aclEgressIpMaskControlCodeBitmask

Indicates the control code bitmask to check against the TCP packets.
The relative bitmask must be created before the
ACE binds to the interface in egress direction.
This object cannot be configured when the status of …

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.11

aclEgressIpMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.12

aclIngressMacMaskTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.6 · 1 row entry · 8 columns

Open in standard view

The conceptual table of aclIngressMacMaskEntry.

aclIngressMacMaskEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1

The conceptual row for aclIngressMacMaskTable.

Indexes

aclIngressMacMaskIndex

Column Syntax OID

aclIngressMacMaskIndex

The index of an mask entry within an ingress mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.1

aclIngressMacMaskPrecedence

The created order of an mask entry within an ingress mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.2

aclIngressMacMaskSourceMacAddrBitmask

Indicates the source MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.3

aclIngressMacMaskDestMacAddrBitmask

Indicates the destination MAC bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.4

aclIngressMacMaskVidBitmask

Indicates the vid bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry,…

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.5

aclIngressMacMaskEtherTypeBitmask

Indicates the ethertype bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.6

aclIngressMacMaskIsEnablePktformat

Indicates whether to check the packet format against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of t…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.7

aclIngressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.8

aclEgressMacMaskTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.7 · 1 row entry · 8 columns

Open in standard view

The conceptual table of aclEgressMacMaskEntry.

aclEgressMacMaskEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1

The conceptual row for aclEgressMacMaskTable.

Indexes

aclEgressMacMaskIndex

Column Syntax OID

aclEgressMacMaskIndex

The index of a mask entry within an egress mask table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.1

aclEgressMacMaskPrecedence

The created precedence of a mask entry within an egress mask table.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.2

aclEgressMacMaskSourceMacAddrBitmask

Indicates the source MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.3

aclEgressMacMaskDestMacAddrBitmask

Indicates the destination MAC bitmask to check against the packets,
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of …

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.4

aclEgressMacMaskVidBitmask

Indicates the vid bitmask to check against the packets.
The relative bitmask must be created before the ACE binds
to the interface in ingress direction.
This object cannot be configured when the status of the
entry,…

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.5

aclEgressMacMaskEtherTypeBitmask

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.6

aclEgressMacMaskIsEnablePktformat

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.7

aclEgressMacMaskStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.8

aclIpTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.8 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of aclIpEntry.

aclIpEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.8.1

The conceptual row for aclIpTable.

Indexes

aclIpAclName

Column	Syntax	OID
aclIpAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.8.1.1`

aclMacTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.9 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of aclMacEntry.

aclMacEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.9.1

The conceptual row for aclMacTable.

Indexes

aclMacAclName

Column	Syntax	OID
aclMacAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.9.1.1`

aclArpAceTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.10 · 1 row entry · 15 columns

Open in standard view

The conceptual table of all of aclArpAceEntry.

aclArpAceEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1

The conceptual row for aclArpAceTable.

Indexes

aclArpAceName aclArpAceIndex

Column Syntax OID

aclArpAceName

The name of an ACL. Within a feature a unique name
is used to identify the list to which the entry
belongs in the device.

OctetString

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.1

aclArpAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.2

aclArpAcePrecedence

Specifies the ARP precedence value to be matched.
This object cannot not be configured when the status of
the entry, aclArpAceStatus, is active(1).

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.3

aclArpAceAction

Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, aclArpAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.4

aclArpAcePktType

Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, aclArpAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	request
2	response
3	both

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.5

aclArpAceSourceIpAddr

The specified source ARP address. The packet's source
address is AND'ed with the value of
aclArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.6

aclArpAceSourceIpAddrBitmask

The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
aclArpAceSourceIpAddr and then compared against the
value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.7

aclArpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND'ed with the value of
aclArpAceDestIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.8

aclArpAceDestIpAddrBitmask

The specified destination IP address mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.9

aclArpAceSourceMacAddr

Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this ob…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.10

aclArpAceSourceMacAddrBitmask

The specified source MAC address mask.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.11

aclArpAceDestMacAddr

Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.12

aclArpAceDestMacAddrBitmask

The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.13

aclArpAceLogStatus

Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, aclArpAceStatus, is active(1).

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.14

aclArpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.15

aclArpTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.7.11 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of aclArpEntry.

aclArpEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.7.11.1

The conceptual row for aclArpTable.

Indexes

aclArpAclName

Column	Syntax	OID
aclArpAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.8.2.1.1.17.7.11.1.1`

ipFilterSnmpTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.9.1 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.9.1.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpStartAddress

Column Syntax OID

ipFilterSnmpStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.1

ipFilterSnmpEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.2

ipFilterSnmpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.3

ipFilterHTTPTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.9.2 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterHTTPEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.9.2.1

This entry includes an IP address range which the system
will allow to connect to this device through HTTP.

Indexes

ipFilterHTTPStartAddress

Column Syntax OID

ipFilterHTTPStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.1

ipFilterHTTPEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.2

ipFilterHTTPStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.3

ipFilterTelnetTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.9.3 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.9.3.1

This entry includes an IP address range which the system
will allow them to connect to this device through Telnet.

Indexes

ipFilterTelnetStartAddress

Column Syntax OID

ipFilterTelnetStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.1

ipFilterTelnetEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.2

ipFilterTelnetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.3

dot1xAuthConfigExtTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.11.1 · 1 row entry · 2 columns

Open in standard view

The extension table of dot1xAuthConfigTable.

dot1xAuthConfigExtEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.11.1.1

The entry of dot1xAuthConfigExtTable.

Indexes

No indexes recorded

Column Syntax OID

dot1xAuthConfigExtOperMode

The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports.

Enumerationr/w

Enumerated Values:

1	singleHost
2	multiHost
3	macBasedAuth

.1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.1

dot1xAuthConfigExtMultiHostMaxCnt

The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.2

aaaMethodTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.12.1 · 1 row entry · 6 columns

Open in standard view

Contains the settings needed for accounting.

aaaMethodEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1

A conceptual row in the aaaMethodTable.

Indexes

aaaMethodIndex

Column Syntax OID

aaaMethodIndex

Specifies the index for the entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.1

aaaMethodName

Name for the method.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.2

aaaMethodGroupName

Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.3

aaaMethodMode

start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process b…

Enumerationr/w

Enumerated Values:

1	start-stop

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.4

aaaMethodStatus

Set to 1 to initiate the aaaMethodTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.5

aaaMethodClientType

dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges.

Enumerationr/w

Enumerated Values:

1	dot1x
2	exec

.1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.6

aaaRadiusGroupTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.12.2 · 1 row entry · 4 columns

Open in standard view

Uses a subset of RADIUS servers for accounting as defined by the server group

aaaRadiusGroupEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.12.2.1

A conceptual row of aaaRadiusGroupEntry.

Indexes

aaaRadiusGroupIndex

Column Syntax OID

aaaRadiusGroupIndex

Specifies the index for the entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.1

aaaRadiusGroupServerBitMap

Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.2

aaaRadiusGroupName

Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.3

aaaRadiusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.4

aaaTacacsPlusGroupTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.12.3 · 1 row entry · 4 columns

Open in standard view

Uses a subset of TACACS+ servers for accounting as defined by the server group

aaaTacacsPlusGroupEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.12.3.1

A conceptual row of aaaTacacsPlusGroupEntry.

Indexes

aaaTacacsPlusGroupIndex

Column Syntax OID

aaaTacacsPlusGroupIndex

Specifies the index for the entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.1

aaaTacacsPlusGroupServerBitMap

Identifies which TACACS+ sever to use.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.2

aaaTacacsPlusGroupName

Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.3

aaaTacacsPlusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.4

aaaAccountTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.12.5 · 1 row entry · 4 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccountEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.12.5.1

A conceptual row of aaaAccountTable.

Indexes

aaaAccountIfIndex

Column Syntax OID

aaaAccountIfIndex

Defined as the ifIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.1

aaaAccountMethodName

Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.2

aaaAccountProtocol

Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.3

aaaAccountStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.4

aaaAccExecTable

table

.1.3.6.1.4.1.259.8.2.1.1.17.12.9 · 1 row entry · 2 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccExecEntry entry .1.3.6.1.4.1.259.8.2.1.1.17.12.9.1

A conceptual row of aaaAccExecTable.

Indexes

aaaAccExecIndex

Column Syntax OID

aaaAccExecIndex

The method of accessing CLI management.

Enumeration

Enumerated Values:

1	console
2	vty

.1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.1

aaaAccExecMethodName

Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.2

remoteLogServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.19.6.4 · 1 row entry · 2 columns

Open in standard view

A Table for storing the remote log Server list.

remoteLogServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column Syntax OID

remoteLogServerIp

The IP address of the remote log Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.1

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.2

smtpServerIpTable

table

.1.3.6.1.4.1.259.8.2.1.1.19.7.4 · 1 row entry · 2 columns

Open in standard view

The SMTP server IP table. 
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.259.8.2.1.1.19.7.4.1

A conceptual row of the smtpServerIpTable.

Indexes

smtpServerIp

Column Syntax OID

smtpServerIp

SMTP mail server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.1

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.2

smtpDestEMailTable

table

.1.3.6.1.4.1.259.8.2.1.1.19.7.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.259.8.2.1.1.19.7.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

smtpDestEMail

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

Constraints:
range: 0-41

.1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.2

sntpServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.23.1.4 · 1 row entry · 2 columns

Open in standard view

Table for SNTP servers

sntpServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column	Syntax	OID
sntpServerIndex The index of a server. This table has fixed size.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.1`
sntpServerIpAddress The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.2`

ntpServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.23.5.5 · 1 row entry · 4 columns

Open in standard view

Table for NTP servers

ntpServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.23.5.5.1

Entry for NTP servers.

Indexes

ntpServerIpAddress

Column Syntax OID

ntpServerIpAddress

The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.1

ntpServerVersion

NTP version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.2

ntpServerKeyId

Key for a NTP server. This variable can only be written.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.3

ntpServerStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicates tha…

Enumerationr/w

Enumerated Values:

1	create
2	active
3	destroy

.1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.4

ntpAuthKeyTable

table

.1.3.6.1.4.1.259.8.2.1.1.23.5.6 · 1 row entry · 3 columns

Open in standard view

Table for NTP Authentication keys

ntpAuthKeyEntry entry .1.3.6.1.4.1.259.8.2.1.1.23.5.6.1

Entry for NTP Authentication keys.

Indexes

ntpAuthKeyId

Column Syntax OID

ntpAuthKeyId

The index of a Authentication key. This table has fixed size.

Integer32

Constraints:
range: 1-65536

.1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.1

ntpAuthKeyWord

The Authentication key word is used to created a key by the MD5
And the max length is 32.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.2

ntpAuthKeyStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicates tha…

Enumerationr/w

Enumerated Values:

1	create
2	active
3	destroy

.1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.3

fileCopyOamResultTable

table

.1.3.6.1.4.1.259.8.2.1.1.24.1.15.2 · 1 row entry · 2 columns

Open in standard view

Table for OAM remote firmware upgrade result.

fileCopyOamResultEntry entry .1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1

A result entry for OAM remote firmware upgrade.

Indexes

fileCopyOamLocalIfIndex

Column Syntax OID

fileCopyOamLocalIfIndex

The ifIndex value of the port excluding trunk. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.1

fileCopyOamResult

The status of the last firmware upgrade procedure. This
object will have a value of oamStatusUnknown(2) if no
firmware upgrade operation has been performed.

The oamSuccess(1) indicates that the remote fir…

Enumeration

Enumerated Values:

1	oamSuccess
2	oamStatusUnknown
3	oamTransmissionTerminated
4	oamTerminatedByPeer
5	oamTimeout
6	oamResourceNotAvailable
7	oamFileFormatNotSupported
8	oamChecksumError
9	oamWriteFlashError
10	oamLinkDown
11	oamUpgradeFailed
12	oamDownloadFailed

.1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.2

fileInfoTable

table

.1.3.6.1.4.1.259.8.2.1.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A singl…

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.259.8.2.1.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.259.8.2.1.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

fileAutoDownloadResultUnitID

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing. …

Enumeration

Enumerated Values:

1	notCopying
2	copying

.1.3.6.1.4.1.259.8.2.1.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.

FileCopyStatus

Textual Convention: FileCopyStatus Enumeration

Type Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted

.1.3.6.1.4.1.259.8.2.1.1.24.3.1.3

dnsHostTable

table

.1.3.6.1.4.1.259.8.2.1.1.26.3 · 1 row entry · 3 columns

Open in standard view

This table is used to define static host name-to-address mapping.

dnsHostEntry entry .1.3.6.1.4.1.259.8.2.1.1.26.3.1

A conceptual row for the dnsHostTable.

Indexes

dnsHostName dnsHostIndex

Column	Syntax	OID
dnsHostName The DNS Host name.	OctetString Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.8.2.1.1.26.3.1.1`
dnsHostIndex The secondary index of this dnsHostTable, representing the sequence of the dnsHostIp.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.259.8.2.1.1.26.3.1.2`
dnsHostIp The DNS Host IP.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.26.3.1.3`

dnsAliasTable

table

.1.3.6.1.4.1.259.8.2.1.1.26.4 · 1 row entry · 2 columns

Open in standard view

This table displays the alias of the host name.

dnsAliasEntry entry .1.3.6.1.4.1.259.8.2.1.1.26.4.1

A conceptual row for the dnsAliasTable.

Indexes

dnsAliasName dnaAliasAlias

Column	Syntax	OID
dnsAliasName Host name.	OctetString Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.8.2.1.1.26.4.1.1`
dnaAliasAlias Alias.	OctetString Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.8.2.1.1.26.4.1.2`

dnsDomainListTable

table

.1.3.6.1.4.1.259.8.2.1.1.26.5 · 1 row entry · 2 columns

Open in standard view

This table defines a list of default domain names to complete unqualified host names.

dnsDomainListEntry entry .1.3.6.1.4.1.259.8.2.1.1.26.5.1

A conceptual row for the dnsDomainListTable.

Indexes

dnsDomainListName

Column Syntax OID

dnsDomainListName

Domain name.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.259.8.2.1.1.26.5.1.1

dnsDomainListStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.26.5.1.2

dnsNameServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.26.6 · 1 row entry · 2 columns

Open in standard view

To specify the address of one or more 
name servers to use for name and address resolution.
This table has fixed size, will get 0.0.0.0 dnsNameServerIp 
if this entry is not existed.

dnsNameServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.26.6.1

A conceptual row for dnsNameServerTable.

Indexes

dnsNameServerIndex

Column	Syntax	OID
dnsNameServerIndex Index of this dnsNameServerTable, representing the sequence of the dnsNameServerIp.	Integer32 Constraints: `range: 1-6`	`.1.3.6.1.4.1.259.8.2.1.1.26.6.1.1`
dnsNameServerIp IP address of name server.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.26.6.1.2`

dnsCacheTable

table

.1.3.6.1.4.1.259.8.2.1.1.26.7 · 1 row entry · 6 columns

Open in standard view

To display the RRs in DNS cache.

dnsCacheEntry entry .1.3.6.1.4.1.259.8.2.1.1.26.7.1

A conceptual row for the dnsCacheTable.

Indexes

dnsCacheIndex

Column Syntax OID

dnsCacheIndex

The entry sequence number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.1

dnsCacheFlag

Always get 4, means this record is unreliable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.2

dnsCacheType

Cache Type: address(1); cname(2).

Enumeration

Enumerated Values:

1	address
2	cname

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.3

dnsCacheIp

The DNS cache IP.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.4

dnsCacheTtl

The DNS cache TTL.

Integer32

Constraints:
range: 0-876000

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.5

dnsCacheDomain

The DNS cache domain.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.259.8.2.1.1.26.7.1.6

mcastStormTable

table

.1.3.6.1.4.1.259.8.2.1.1.33.1.1 · 1 row entry · 3 columns

Open in standard view

Table to manage the control of multicast storms for ports.

mcastStormEntry entry .1.3.6.1.4.1.259.8.2.1.1.33.1.1.1

The conceptual row of multiStormTable.

Indexes

mcastStormIfIndex

Column Syntax OID

mcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.1

mcastStormStatus

Whether multicast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.2

mcastStormPktRate

Multicast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.4

bcastStormTable

table

.1.3.6.1.4.1.259.8.2.1.1.33.3.1 · 1 row entry · 3 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.259.8.2.1.1.33.3.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.2

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. For a 10 Gbps port, the range
is 1042 to 262143.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.4

unknownUcastStormTable

table

.1.3.6.1.4.1.259.8.2.1.1.33.4.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the unknown unicast storm control.

unknownUcastStormEntry entry .1.3.6.1.4.1.259.8.2.1.1.33.4.1.1

The conceptual row of unknownUcastStormTable.

Indexes

unknownUcastStormIfIndex

Column Syntax OID

unknownUcastStormIfIndex

The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.1

unknownUcastStormStatus

The parameter indicates that the unknown unicast
storm protection is enabled/disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.2

unknownUcastStormSampleType

The parameter indicates which storm protection mode is used.

Enumerationr/w

Enumerated Values:

1	packet-rate

.1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.3

unknownUcastStormPktRate

The parameter indicates the packet rate of the storm protection.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.4

atcBcastStormTable

table

.1.3.6.1.4.1.259.8.2.1.1.33.5.3 · 1 row entry · 12 columns

Open in standard view

The table contains the Auto Traffic Control configuration
and the status for broadcast traffic.

atcBcastStormEntry entry .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1

The conceptual row of the table.

Indexes

atcBcastStormIfIndex

Column Syntax OID

atcBcastStormIfIndex

The specified port on which the ATC is applied.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.1

atcBcastStormEnable

The parameter indicates whether the ATC of the broadcast
traffic is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.2

atcBcastStormAutoRelease

The parameter indicates whether the Auto-Release feature
of ATC is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.3

atcBcastStormSampleType

The parameter indicates the unit of traffic rate and threshold.

Enumerationr/w

Enumerated Values:

1	packet-rate

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.4

atcBcastStormCurrentTrafficRate

The parameter indicates the current broadcast traffic rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.5

atcBcastStormAlarmFireThreshold

The parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm.
The unit of the parameter is 1K and the value must be greater
than or equal to the at…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.6

atcBcastStormAlarmClearThreshold

The parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic. The unit of the parameter is 1K and the value
must be less than or equal to th…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.7

atcBcastStormTcAction

The parameter indicates the protecting action which
ATC will applied to the specified port.

Enumerationr/w

Enumerated Values:

1	rate-control
2	shutdown

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.8

atcBcastStormAlarmFireTrapStatus

The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.9

atcBcastStormAlarmClearTrapStatus

The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.10

atcBcastStormTcApplyTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is activated.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.11

atcBcastStormTcReleaseTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is released.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.12

atcMcastStormTable

table

.1.3.6.1.4.1.259.8.2.1.1.33.5.6 · 1 row entry · 12 columns

Open in standard view

The table contains the Auto Traffic Control configuration
and the status for mulicast traffic.

atcMcastStormEntry entry .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1

The conceptual row of the table.

Indexes

atcMcastStormIfIndex

Column Syntax OID

atcMcastStormIfIndex

The specified port on which the ATC is applied.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.1

atcMcastStormEnable

The parameter indicates whether the ATC of the mulicast
traffic is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.2

atcMcastStormAutoRelease

The parameter indicates whether the Auto-Release feature
of ATC is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.3

atcMcastStormSampleType

The parameter indicates the unit of traffic rate and threshold.

Enumerationr/w

Enumerated Values:

1	packet-rate

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.4

atcMcastStormCurrentTrafficRate

The parameter indicates the current mulicast traffic rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.5

atcMcastStormAlarmFireThreshold

The parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm.
The unit of the parameter is 1K and the value must be greater than
or equal to the atcM…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.6

atcMcastStormAlarmClearThreshold

The parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic. The unit of the parameter is 1K and the value
must be less than or equal to the …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.7

atcMcastStormTcAction

The parameter indicates the protecting action which
ATC will applied to the specified port.

Enumerationr/w

Enumerated Values:

1	rate-control
2	shutdown

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.8

atcMcastStormAlarmFireTrapStatus

The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.9

atcMcastStormAlarmClearTrapStatus

The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.10

atcMcastStormTcApplyTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is activated.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.11

atcMcastStormTcReleaseTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is released.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.12

mvrGroupTable

table

.1.3.6.1.4.1.259.8.2.1.1.44.6 · 1 row entry · 3 columns

Open in standard view

The table for configuring the MVR group.

mvrGroupEntry entry .1.3.6.1.4.1.259.8.2.1.1.44.6.1

The entry for configuring the MVR group.

Indexes

mvrGroupId

Column Syntax OID

mvrGroupId

The multicast address of the MVR group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.44.6.1.1

mvrGroutActive

To indicate if the group has a member or not. If there are no
members, the status is inactive(2); otherwise the status
is active(1).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.8.2.1.1.44.6.1.2

mvrGroupStatus

Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.44.6.1.3

mvrGroupStaticTable

table

.1.3.6.1.4.1.259.8.2.1.1.44.7 · 1 row entry · 3 columns

Open in standard view

The table for configuring the static members of the
MVR group.

mvrGroupStaticEntry entry .1.3.6.1.4.1.259.8.2.1.1.44.7.1

The entry for configuring the static members of the
MVR group.

Indexes

mvrGroupStaticAddress

Column Syntax OID

mvrGroupStaticAddress

The multicast address of the MVR group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.44.7.1.1

mvrGroupStaticPorts

The set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.8.2.1.1.44.7.1.2

mvrGroupStaticStatus

Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.44.7.1.3

mvrGroupCurrentTable

table

.1.3.6.1.4.1.259.8.2.1.1.44.8 · 1 row entry · 2 columns

Open in standard view

The table for the current members of the MVR group.

mvrGroupCurrentEntry entry .1.3.6.1.4.1.259.8.2.1.1.44.8.1

The entry for the current members of the MVR group.

Indexes

mvrGroupCurrentAddress

Column	Syntax	OID
mvrGroupCurrentAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.44.8.1.1`
mvrGroupCurrentPorts The complete set of ports currently associated with this MVR group.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.8.2.1.1.44.8.1.2`

mvrPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.44.9 · 1 row entry · 4 columns

Open in standard view

The table for configuring the MVR port.

mvrPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.44.9.1

The entry for configuring the MVR port.

Indexes

mvrIfIndex

Column Syntax OID

mvrIfIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.44.9.1.1

mvrPortType

For configuring the MVR port type. To disable the MVR
port type, use the none(0).

Enumerationr/w

Enumerated Values:

0	none
1	source
2	receiver

.1.3.6.1.4.1.259.8.2.1.1.44.9.1.2

mvrPortImmediateLeave

To enable immediate leave on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.44.9.1.3

mvrPortActive

To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.8.2.1.1.44.9.1.4

egressPacketBlockUnknownMcastTable

table

.1.3.6.1.4.1.259.8.2.1.1.45.1 · 1 row entry · 2 columns

Open in standard view

Table to manage the control of unknown multicast egress 
packet block for ports.

egressPacketBlockUnknownMcastEntry entry .1.3.6.1.4.1.259.8.2.1.1.45.1.1

The conceptual row of egressPacketBlockUnknownMcastTable.

Indexes

egressPacketBlockUnknownMcastIfIndex

Column Syntax OID

egressPacketBlockUnknownMcastIfIndex

The port and the trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.45.1.1.1

egressPacketBlockUnknownMcastStatus

Whether unknown multicast egress packet block protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.45.1.1.2

egressPacketBlockUnknownUcastTable

table

.1.3.6.1.4.1.259.8.2.1.1.45.2 · 1 row entry · 2 columns

Open in standard view

Table to manage the control of unknown unicast egress 
packet block for ports.

egressPacketBlockUnknownUcastEntry entry .1.3.6.1.4.1.259.8.2.1.1.45.2.1

The conceptual row of unknownUcastTable.

Indexes

egressPacketBlockUnknownUcastIfIndex

Column Syntax OID

egressPacketBlockUnknownUcastIfIndex

The port and the trunk interface of the portTable. The
interface identified by a particular value of this index
is the same interface as identified by the same value
of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.45.2.1.1

egressPacketBlockUnknownUcastStatus

Whether unknown unicast egress packet block protection
is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.45.2.1.2

dhcpSnoopVlanConfigTable

table

.1.3.6.1.4.1.259.8.2.1.1.46.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP Snooping configurations of existing VLANs.

dhcpSnoopVlanConfigEntry entry .1.3.6.1.4.1.259.8.2.1.1.46.2.1.1

An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.

Indexes

dhcpSnoopVlanIndex

Column Syntax OID

dhcpSnoopVlanIndex

This object indicates the VLAN ID on which DHCP Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.1

dhcpSnoopVlanEnable

This object indicates whether DHCP Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.2

dhcpSnoopPortConfigTable

table

.1.3.6.1.4.1.259.8.2.1.1.46.3.1 · 1 row entry · 2 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose.

dhcpSnoopPortConfigEntry entry .1.3.6.1.4.1.259.8.2.1.1.46.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.

Indexes

dhcpSnoopPortIfIndex

Column Syntax OID

dhcpSnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.1

dhcpSnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.2

dhcpSnoopBindingsTable

table

.1.3.6.1.4.1.259.8.2.1.1.46.4.1 · 1 row entry · 7 columns

Open in standard view

A table contains the DHCP bindings information learnt by
the device.

dhcpSnoopBindingsEntry entry .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

dhcpSnoopBindingsVlanIndex dhcpSnoopBindingsMacAddress

Column Syntax OID

dhcpSnoopBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.1

dhcpSnoopBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

TOKEN-RING-RMON-MIBMacAddress

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.2

dhcpSnoopBindingsAddrType

This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.3

dhcpSnoopBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	dynamic
2	static

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.4

dhcpSnoopBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.5

dhcpSnoopBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.6

dhcpSnoopBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.7

clusterCandidateTable

table

.1.3.6.1.4.1.259.8.2.1.1.47.9 · 1 row entry · 3 columns

Open in standard view

A table listing cluster candidates.

clusterCandidateEntry entry .1.3.6.1.4.1.259.8.2.1.1.47.9.1

A conceptual row containing the information of the candidate.

Indexes

clusterCandidateMacAddr

Column Syntax OID

clusterCandidateMacAddr

The MAC address of the candidate.

TOKEN-RING-RMON-MIBMacAddress

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.8.2.1.1.47.9.1.1

clusterCandidateDesc

The description of the candidate.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.259.8.2.1.1.47.9.1.3

clusterCandidateRole

The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : Th…

Enumeration

Enumerated Values:

2	candidate
3	activeMember
4	inactiveMember

.1.3.6.1.4.1.259.8.2.1.1.47.9.1.4

clusterMemberTable

table

.1.3.6.1.4.1.259.8.2.1.1.47.10 · 1 row entry · 4 columns

Open in standard view

A table listing clustering members.

clusterMemberEntry entry .1.3.6.1.4.1.259.8.2.1.1.47.10.1

A conceptual row containing the information of the member.

Indexes

clusterMemberId

Column Syntax OID

clusterMemberId

The ID of the member.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.47.10.1.1

clusterMemberMacAddr

The MAC address of the member.

TOKEN-RING-RMON-MIBMacAddress

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.8.2.1.1.47.10.1.2

clusterMemberDesc

The description of the member.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.259.8.2.1.1.47.10.1.3

clusterMemberActive

The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is…

Enumeration

Enumerated Values:

3	activeMember
4	inactiveMember

.1.3.6.1.4.1.259.8.2.1.1.47.10.1.4

ipSrcGuardConfigTable

table

.1.3.6.1.4.1.259.8.2.1.1.48.1 · 1 row entry · 2 columns

Open in standard view

A table contains the configurations to enable or disable
IP Source Guard at each port or trunk.

ipSrcGuardConfigEntry entry .1.3.6.1.4.1.259.8.2.1.1.48.1.1

An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.

Indexes

ipSrcGuardPortIfIndex

Column Syntax OID

ipSrcGuardPortIfIndex

This object idents the port or trunk which is capable of
IP Source Guard feature.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.48.1.1.1

ipSrcGuardMode

This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filte…

Enumerationr/w

Enumerated Values:

0	diabled
1	srcIp
2	srcIpMac

.1.3.6.1.4.1.259.8.2.1.1.48.1.1.2

ipSrcGuardAddrTable

table

.1.3.6.1.4.1.259.8.2.1.1.48.2 · 1 row entry · 8 columns

Open in standard view

A table contains the IP Source Guard bindings information
learnt by the device.

ipSrcGuardAddrEntry entry .1.3.6.1.4.1.259.8.2.1.1.48.2.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

ipSrcGuardBindingsVlanIndex ipSrcGuardBindingsMacAddress

Column Syntax OID

ipSrcGuardBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.1

ipSrcGuardBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

TOKEN-RING-RMON-MIBMacAddress

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.2

ipSrcGuardBindingsAddrType

This object indicates the type of IP address denoted in
ipSrcGuardBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.3

ipSrcGuardBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	dynamic
3	static

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.4

ipSrcGuardBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.5

ipSrcGuardBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.6

ipSrcGuardBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.7

ipSrcGuardBindingsStatus

The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is a…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.48.2.1.8

oamPortStatusTable

table

.1.3.6.1.4.1.259.8.2.1.1.52.1 · 1 row entry · 2 columns

Open in standard view

A table contains the status of OAM at each port.

oamPortStatusEntry entry .1.3.6.1.4.1.259.8.2.1.1.52.1.1

An entry contains the status of OAM at each port.

Indexes

oamPortIfIndex

Column Syntax OID

oamPortIfIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.52.1.1.1

oamEnableStatus

This object configures the status of OAM at each port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.52.1.1.2

oamPortModeTable

table

.1.3.6.1.4.1.259.8.2.1.1.52.2 · 1 row entry · 2 columns

Open in standard view

A table contains the mode of OAM at each port.

oamPortModeEntry entry .1.3.6.1.4.1.259.8.2.1.1.52.2.1

An entry contains the mode of OAM at each port.

Indexes

oamPortModeIndex

Column Syntax OID

oamPortModeIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.52.2.1.1

oamPortMode

This object configures the mode of OAM at each port.

Enumerationr/w

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.259.8.2.1.1.52.2.1.2

oamPortClearStatTable

table

.1.3.6.1.4.1.259.8.2.1.1.52.3 · 1 row entry · 2 columns

Open in standard view

A table contains the information of clear OAM statistics
at each port.

oamPortClearStatEntry entry .1.3.6.1.4.1.259.8.2.1.1.52.3.1

An entry contains the information of clear OAM statistics
at each port.

Indexes

oamPortClearStatIndex

Column Syntax OID

oamPortClearStatIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.52.3.1.1

oamClearStatistics

This variable is used to clear the counters for OAM.
Set this variable to clear(2) to perform the clear operation,
noClear(1) will always be displayed when reading this
variable.

Enumerationr/w

Enumerated Values:

1	noClear
2	clear

.1.3.6.1.4.1.259.8.2.1.1.52.3.1.2

oamLoopbackTable

table

.1.3.6.1.4.1.259.8.2.1.1.52.4 · 1 row entry · 6 columns

Open in standard view

Table for OAM remote loopback test.

oamLoopbackEntry entry .1.3.6.1.4.1.259.8.2.1.1.52.4.1

Entry for OAM remote loopback test.

Indexes

oamLoopbackTestIfIndex

Column Syntax OID

oamLoopbackTestIfIndex

The ifIndex value of the port(excluding trunk). The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.1

oamLoopbackTestPacketNumber

Setting the packet number when performing loopback test.

Integer32r/w

Constraints:
range: 1-99999999

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.2

oamLoopbackTestPacketSize

Setting the packet size when performing loopback test.

Integer32r/w

Constraints:
range: 64-1518

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.3

oamLoopbackTestAction

Setting this object to test(2) to begin the loopback test.
This object will be noTest(1) when the loopback test is
canceled or the loopback test has finished.

Enumerationr/w

Enumerated Values:

1	noTest
2	test

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.4

oamLoopbackTestResultTx

A count of the the total number of loopback frames transmitted
at last loopback test on this interface.

framesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.5

oamLoopbackTestResultRx

A count of the the total number of loopback frames received
at last loopback test on this interface.

framesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.52.4.1.6

remoteAcceptableFrameTypeTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.1 · 1 row entry · 2 columns

Open in standard view

A table that contains the acceptable frame type
configuration at the specified remote device.

remoteAcceptableFrameTypeEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.1.1

An entry that contains the acceptable frame type
configuration at the specified remote device.

Indexes

remoteAcceptableFrameTypeIndex

Column Syntax OID

remoteAcceptableFrameTypeIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.1.1.1

remoteAcceptableFrameType

This object configures the acceptable frame types at the
specified remote device.

Enumerationr/w

Enumerated Values:

1	both
2	tagged
3	untagged

.1.3.6.1.4.1.259.8.2.1.1.53.1.1.2

remoteEepromWriteTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.2 · 1 row entry · 2 columns

Open in standard view

A table contains the information of whether EEPROM is
writable at the specified remote device.

remoteEepromWriteEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.2.1

An entry that contains the information of whether EEPROM
is writable at the specified remote device.

Indexes

remoteEepromWriteIndex

Column Syntax OID

remoteEepromWriteIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.2.1.1

remoteEepromWriteEnableStatus

The object configures the status of EEPROM at the
specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.2.1.2

remoteFlowControlEnbaleTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.3 · 1 row entry · 2 columns

Open in standard view

A table contains the flow control configuation at the
specified remote device.

remoteFlowControlEnbaleEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.3.1

An entry that contains the flow control configuration
at the specified remote device.

Indexes

remoteFLIndex

Column Syntax OID

remoteFLIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.3.1.1

remoteFlowControlEnbale

The object configures the status of flow control at the
specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.3.1.2

remoteNegotiationEnableTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.4 · 1 row entry · 2 columns

Open in standard view

A table contains the auto-negotiation configuration
at the specified remote device.

remoteNegotiationEnableEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.4.1

An entry contains the auto-negotiation configuration
at the specified remote device.

Indexes

remoteNegoIndex

Column Syntax OID

remoteNegoIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.4.1.1

remoteNegotiationEnable

The object configures the status of auto negotiation
at the specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.4.1.2

remoteShutDownEnableTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.5 · 1 row entry · 2 columns

Open in standard view

A table contains the information of whether shutdown
process is enabled at the specified remote device.

remoteShutDownEnableEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.5.1

An entry contains the information of whether shutdown
process is enabled at the specified remote device.

Indexes

remoteSDIndex

Column Syntax OID

remoteSDIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.5.1.1

remoteShutDownEnable

Enable or disable the remote ShutDown.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.5.1.2

remoteInputToSwitchTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.6 · 1 row entry · 2 columns

Open in standard view

A table contains the information of whether the input
is tagged or untagged at the specified remote device.

remoteInputToSwitchEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.6.1

An entry contains the information of whether the input
is tagged or untagged at the specified remote device.

Indexes

remoteInputIndex

Column Syntax OID

remoteInputIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.6.1.1

remoteInputToSwitch

The object configures the packet format of input at the
specified remote device.

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged

.1.3.6.1.4.1.259.8.2.1.1.53.6.1.2

remoteOutputToSubscriberTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.7 · 1 row entry · 2 columns

Open in standard view

A table contains the information of whether output to
subscriber is tagged or untagged at the specified remote
device.

remoteOutputToSubscriberEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.7.1

An entry contains the information of whether output to
subscriber is tagged or untagged at the specified remote
device.

Indexes

remoteOutputIndex

Column Syntax OID

remoteOutputIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.7.1.1

remoteOutputToSubscriber

The object configures the packet format of output to
subscriber at the specified remote device.

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged

.1.3.6.1.4.1.259.8.2.1.1.53.7.1.2

remoteSpeedDuplexTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.8 · 1 row entry · 2 columns

Open in standard view

A table contains the speed-duplex configuration at the
specified remote device.

remoteSpeedDuplexEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.8.1

An entry contains the speed-duplex configuration at the
specified remote device.

Indexes

remoteSpeedDuplexIndex

Column Syntax OID

remoteSpeedDuplexIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.8.1.1

remoteSpeedDuplex

The object configures the speed-duplex at the specified
remote device.

Enumerationr/w

Enumerated Values:

1	half10
2	full10
3	half100
4	full100
5	negotiation

.1.3.6.1.4.1.259.8.2.1.1.53.8.1.2

remoteMdixTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.9 · 1 row entry · 2 columns

Open in standard view

A table contains the MDIX configuration at the specified
remote device.

remoteMdixEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.9.1

An entry contains the MDIX configuration at the specified
remote device.

Indexes

remoteMdixIndex

Column Syntax OID

remoteMdixIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.9.1.1

remoteMdix

The object configures the MDIX at the specified remote
device.

Enumerationr/w

Enumerated Values:

1	auto
2	normal
3	crossover

.1.3.6.1.4.1.259.8.2.1.1.53.9.1.2

remoteDefaultTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.10 · 1 row entry · 4 columns

Open in standard view

A table contains the information of default VLAN and
priority at the specified remote device.

remoteDefaultEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.10.1

An entry contains the information of default VLAN and
priority at the specified remote device.

Indexes

remoteDefaultIndex

Column Syntax OID

remoteDefaultIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.10.1.1

remoteDefaultVlan

The object configures the default VLAN at the specified
remote device.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.10.1.2

remoteDefaultPriority

The object configures the default priority at the remote
specified device.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.10.1.3

remoteDefaultEnable

The object is to take effect default VLAN and priority
at the remote specified device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.10.1.4

remoteProtocolVlanTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.11 · 1 row entry · 5 columns

Open in standard view

A table contains the information of protocal VLAN at the
remote specified device.

remoteProtocolVlanEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.11.1

An entry contains the information of protocal VLAN at the
specified remote device.

Indexes

remoteProtocolVlanIndex remoteProtocolVlanEtherType

Column Syntax OID

remoteProtocolVlanIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.11.1.1

remoteProtocolVlanEtherType

The object configures the Ether type at the specified
remote device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.11.1.2

remoteProtocolVlanVid

The vlan of each port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.11.1.3

remoteProtocolVlanPririty

The object configures the VLAN ID at the specified remote
device.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.11.1.4

remoteProtocolVlanRowStatus

The status of this conceptual row entry. This object is
issued to manage the creation and deletion of conceptual
rows.

The status column has six defined values:

- 'active', which indica…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.53.11.1.5

remoteQueueCosMapTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.12 · 1 row entry · 4 columns

Open in standard view

A table contains the information of queue number and
priority of CoS map at the specified remote device.

remoteQueueCosMapEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.12.1

An entry contains the information of queue number and
priority of CoS map at the specified remote device.

Indexes

remoteQueueCosMapIndex remoteQueueCosMapPriority

Column Syntax OID

remoteQueueCosMapIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.12.1.1

remoteQueueCosMapPriority

The object configures the priority at the specified
remote device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.12.1.2

remoteQueueCosMapQueue

The object configures the queue number of CoS map at the
specified remote device.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.12.1.3

remoteQueueCosMapEnable

The object is to take effect the queue Cos map setting at
the remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.12.1.4

remoteQueueModeTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.13.1 · 1 row entry · 2 columns

Open in standard view

A table contains the information of queue mode at the
specified remote device.

remoteQueueModeEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.13.1.1

An entry contains the information of queue mode at the
specified remote device.

Indexes

remoteOutputIndex

Column Syntax OID

remoteQueueModeIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.1

remoteQueueMode

The object configures the queue mode at the specified
remote device.

Enumerationr/w

Enumerated Values:

1	wrr
2	strict

.1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.2

remoteWrrPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.13.2 · 1 row entry · 3 columns

Open in standard view

A table contains the information of the weighted round
robin (WRR) at the specified remote device.

remoteWrrPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.13.2.1

An entry contains the information of the WRR at the
specified remote device.

Indexes

remoteWrrPortIfIndex remoteWrrPortQueueID

Column	Syntax	OID
remoteWrrPortIfIndex This object shows the ifIndex value of the port excluding trunk.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.1`
remoteWrrPortQueueID The object configures the queue ID of WRR at the specified remote device.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.2`
remoteWrrPortWeight The object configures the weight of WRR at the specified remote device.	Integer32r/w Constraints: `range: 1-15`	`.1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.3`

remoteMapTagPriStatusTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.14.1 · 1 row entry · 2 columns

Open in standard view

A table contains the status of tag-priority map at the
specified remote device.

remoteMapTagPriStatusEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.14.1.1

An entry contains the status of tag-priority map at the
specified remote device.

Indexes

remoteMapTagPriStatusIndex

Column Syntax OID

remoteMapTagPriStatusIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.1

remoteMapTagPriStatus

The object configures the status of tap-priority map at
the specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.2

remoteMapTagPriorityTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.14.2 · 1 row entry · 3 columns

Open in standard view

A table contains the information of tag-priority map at
the specified remote device.

remoteMapTagPriorityEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.14.2.1

An entry contains the information of tag-priority map at
the specified remote device.

Indexes

remoteMapTagPriorityIndex remoteMapTagPriority

Column	Syntax	OID
remoteMapTagPriorityIndex This object shows the ifIndex value of the port excluding trunk.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.1`
remoteMapTagPriority The object shows the tap-priority map at the specified remote device.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.2`
remoteMapTagPriorityPri The object configures the priority of tap-priority map at the specified remote device.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.3`

remoteMapTosStatusTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.15.1 · 1 row entry · 2 columns

Open in standard view

A table contains the status of ToS map at the specified
remote device.

remoteMapTosStatusEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.15.1.1

An entry contains the status of ToS map at the specified
remote device.

Indexes

remoteMapTosStatusIndex

Column Syntax OID

remoteMapTosStatusIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.1

remoteMapTosEnableStatus

The object configures the status of ToS map at the
specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.2

remoteMapTosTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.15.2 · 1 row entry · 4 columns

Open in standard view

A table contains the information of ToS map at the
specified remote device.

remoteMapTosEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.15.2.1

An entry contains the information of the TOS map at the
remote device.

Indexes

remoteMapTosIndex remoteMapTos

Column Syntax OID

remoteMapTosIndex

This object shows the ifIndex value of the port excluding
trunk.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.1

remoteMapTos

The object shows the ToS map at the specified remote
device.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.2

remoteMapTosPri

The object configures the the priority of ToS map at the
specified remote device.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.3

remoteMapTosStatus

The status of this conceptual row entry. This object is
isused to manage the creation and deletion of conceptual
rows.

The status column has six defined values:

- 'active', which indica…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.4

remoteMapTrafficClassStatusTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.16.1 · 1 row entry · 2 columns

Open in standard view

A table contains the status of traffic class map at the
specified remote device.

remoteMapTrafficClassStatusEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.16.1.1

An entry contains the status of traffic class map at the
specified remote device.

Indexes

remoteMapTCStatusIndex

Column Syntax OID

remoteMapTCStatusIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.1

remoteMapTCEnableStatus

The object configures the status of traffic class map at
the specified remote device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.2

remoteMapTrafficClassTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.16.2 · 1 row entry · 4 columns

Open in standard view

A table contains the information of traffic class map at
the specified remote device.

remoteMapTrafficClassEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.16.2.1

An entry contains the information of traffic class map
at the specified remote device.

Indexes

remoteMapTrafficClassIfIndex remoteMapTrafficClass

Column Syntax OID

remoteMapTrafficClassIfIndex

This object shows the ifIndex value of the port excluding
trunk.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.1

remoteMapTrafficClass

The object shows the traffic class map at the specified
remote device.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.2

remoteMapCos

The object configures the value of CoS at the specified
remote device.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.3

remoteMapTrafficClassStatus

The status of this conceptual row entry. This object is
issued to manage the creation and deletion of conceptual
rows.

For the following, check the corrections above.

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.4

remoteFactoryDefaultTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.17 · 1 row entry · 2 columns

Open in standard view

A table contains the factory default setting at the
specified remote device.

remoteFactoryDefaultEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.17.1

An entry contains the factory default setting at the
specified remote device.

Indexes

remoteFactoryDefaultIndex

Column Syntax OID

remoteFactoryDefaultIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.17.1.1

remoteFactoryDefault

This object is to apply the factory default setting at
the specified remote device.

Enumerationr/w

Enumerated Values:

set

.1.3.6.1.4.1.259.8.2.1.1.53.17.1.2

remoteDeviceStatisticTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.18 · 1 row entry · 5 columns

Open in standard view

A table shows the statistics for each remote device's
port.

remoteDeviceStatisticEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.18.1

An entry shows the statistics for each remote device's
port.

Indexes

remoteStatisticPortIndex remoteDeviceStatisticIfIndex

Column	Syntax	OID
remoteStatisticPortIndex This object shows the ifIndex value of the port excluding trunk.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.18.1.1`
remoteDeviceStatisticIfIndex This object shows the ifIndex value of the remote device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.18.1.2`
remoteTxPausePacket The total number of pause frames transmitted from the remote device's port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.18.1.3`
remoteRxPausePacket The total number of pause frames received from the remote device's port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.18.1.4`
remoteRxErrorPacket The total number of error frames received from the remote device's port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.18.1.5`

remoteQueuePacketStatisticTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.19 · 1 row entry · 5 columns

Open in standard view

A table contains the packet statistics of each queue for
the remote device's port.

remoteQueuePacketStatisticEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.19.1

An entry contains the packet statistics of each queue for
the remote device's port.

Indexes

remoteQueuePacketStatisticPortIndex remoteQueuePacketDeviceStatisticIfIndex remoteQueuePacketQueueIndex

Column	Syntax	OID
remoteQueuePacketStatisticPortIndex This object shows the ifIndex value of the port excluding trunk.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.19.1.1`
remoteQueuePacketDeviceStatisticIfIndex This object shows the ifIndex value of the specified remote device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.19.1.2`
remoteQueuePacketQueueIndex This object shows the index of packet queue of the specified remote device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.19.1.3`
remoteQueueDropPacket The total number of packets dropped by the remote device's port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.19.1.4`
remoteQueueForwardingPacket The total number of packets forwarded by the remote device's port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.19.1.5`

remoteMacAddressTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.20 · 1 row entry · 3 columns

Open in standard view

A table contains the MAC address of the specified remote
device.

remoteMacAddressEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.20.1

An entry contains the MAC address of the specified remote
device.

Indexes

remoteMacAddressIfIndex

Column Syntax OID

remoteMacAddressIfIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.20.1.1

remoteMacAddress

This object shows the MAC address of the specified remote
device.

OctetStringr/w

.1.3.6.1.4.1.259.8.2.1.1.53.20.1.2

remoteMacAddressStatus

This object shows the information of whether the MAC
address of the remote device is valided.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.53.20.1.3

remoteAccessPointTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.21.3 · 1 row entry · 2 columns

Open in standard view

Contains the access point setting of CPE.

remoteAccessPointEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.21.3.1

A conceptual row in the remoteAccessPoint table.

Indexes

remoteAccessPointLocalPort

Column Syntax OID

remoteAccessPointLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.1

remoteAccessPointStatus

Set this to enabled(1) to enable the Wireless Access Point
function. Sets disabled(2) to disable the Wireless
Access Point function.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.2

remoteDhcpServerTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.21.4 · 1 row entry · 5 columns

Open in standard view

Contains the DHCP server setting of CPE.

remoteDhcpServerEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1

A conceptual row in the remoteDhcpServer table.

Indexes

remoteDhcpServerLocalPort

Column Syntax OID

remoteDhcpServerLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.1

remoteDhcpServerStatus

If this is enabled(1), the remote device acts as a DHCP
server on the LAN side. If this is disabled(2), the remote
device does not act as a DHCP server.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.2

remoteDhcpServerIpAddress

The IP address of DHCP server at remote device.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.3

remoteDhcpServerSubnetMask

The subnet mask of DHCP server at remote device.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.4

remoteDhcpServerGateway

The IP Address of the default gateway at remote device.
If this value is undefined or unknown, it shall have the
value 0.0.0.0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.5

remoteVlanTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.21.5 · 1 row entry · 3 columns

Open in standard view

Contains the VLAN settings of CPE.

remoteVlanEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.21.5.1

A conceptual row in the remoteVlan table.

Indexes

remoteVlanLocalPort remoteVlanId

Column Syntax OID

remoteVlanLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.1

remoteVlanId

Specifiies the VLAN ID.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.2

remoteVlanStatus

Set valid(1) to create the VLAN. Set invalid(2) to delete
the VLAN.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.3

remotePortAdminTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.22.1 · 1 row entry · 3 columns

Open in standard view

Contains the admin status of LAN ports on CPE.

remotePortAdminEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.22.1.1

A conceptual row in the remotePortAdmin table.

Indexes

remotePortAdminLocalPort remotePortAdminRemotePort

Column Syntax OID

remotePortAdminLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.1

remotePortAdminRemotePort

The port interface of remote device.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.2

remotePortAdminStatus

If this is enabled(1), the remote port is in enabled. If
this is disabled(2), the remote port is not in enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.3

remotePortPvidTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.22.2 · 1 row entry · 3 columns

Open in standard view

Contains the VID of LAN ports on CPE.

remotePortPvidEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.22.2.1

A conceptual row in the remotePortPvid table.

Indexes

remotePortPvidLocalPort remotePortPvidRemotePort

Column	Syntax	OID
remotePortPvidLocalPort The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.1`
remotePortPvidRemotePort The port interface of remote device.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.2`
remotePortPvid Sets default VLAN on remote port.	Integer32r/w Constraints: `range: 1-4094`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.3`

remotePortPriorityTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.22.3 · 1 row entry · 3 columns

Open in standard view

Contains the priority of LAN ports on CPE.

remotePortPriorityEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.22.3.1

A conceptual row in the remotePortPriority table.

Indexes

remotePortPriorityLocalPort remotePortPriorityRemotePort

Column	Syntax	OID
remotePortPriorityLocalPort The port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.1`
remotePortPriorityRemotePort The port interface of remote device.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.2`
remotePortPriority Sets default priority on remote port.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.3`

remotePortIgmpSnoopingTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.22.4 · 1 row entry · 3 columns

Open in standard view

Contains the IGMP snooping status of LAN ports on CPE.

remotePortIgmpSnoopingEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.22.4.1

A conceptual row in the remotePortIgmpSnooping table.

Indexes

remotePortIgmpSnoopingLocalPort remotePortIgmpSnoopingRemotePort

Column Syntax OID

remotePortIgmpSnoopingLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.1

remotePortIgmpSnoopingRemotePort

The port interface of remote device.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.2

remotePortIgmpSnooping

If this is enabled(1), IGMP snooping is enabled on the
remote port. If this is disabled(2), IGMP snooping is
disabled on the remote port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.3

remotePortCountersTable

table

.1.3.6.1.4.1.259.8.2.1.1.53.22.5 · 1 row entry · 32 columns

Open in standard view

Contains the information of LAN ports on CPE.

remotePortCountersEntry entry .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1

A conceptual row in the remotePortCounters table.

Indexes

remotePortCountersLocalPort remotePortCountersRemotePort

Column Syntax OID

remotePortCountersLocalPort

The port interface on the switch. The interface identified
by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.1

remotePortCountersRemotePort

The port interface of remote device.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.2

remotePortCountersInUnicastSupported

A value of true(1) indicates that supports receiving
unicast packet counts. A value of false(2) indicates that
not support receiving unicast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.3

remotePortCountersInUnicast

The total number of unicast packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.4

remotePortCountersInBroadcastSupported

A value of true(1) indicates that supports receiving
broadcast packet counts. A value of false(2) indicates
that not support receiving broadcast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.5

remotePortCountersInBroadcast

The total number of broadcasts packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.6

remotePortCountersInPauseSupported

A value of true(1) indicates that supports receiving
pause packet counts. A value of false(2) indicates that
not support receiving pause packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.7

remotePortCountersInPause

The total number of pause packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.8

remotePortCountersInMulticastSupported

A value of true(1) indicates that supports receiving
multicast packet counts. A value of false(2) indicates
that not support receiving multicast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.9

remotePortCountersInMulticast

The total number of multicasts packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.10

remotePortCountersOutUnicastSupported

A value of true(1) indicates that supports transmitting
unicast packet counts. A value of false(2) indicates that
not support transmitting unicast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.11

remotePortCountersOutUnicast

The total number of unicast packets transmitted from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.12

remotePortCountersOutBroadcastSupported

A value of true(1) indicates that supports transmitting
broadcast packet counts. A value of false(2) indicates
that not support transmitting broadcast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.13

remotePortCountersOutBroadcast

The total number of broadcast packets transmitted from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.14

remotePortCountersOutMulticastSupported

A value of true(1) indicates that supports transmitting
multicast packet counts. A value of false(2) indicates
that not support transmitting multicast packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.15

remotePortCountersOutMulticast

The total number of multicast packets transmitted from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.16

remotePortCountersInFcsErrorsSupported

A value of true(1) indicates that supports receiving
FCS error packet counts. A value of false(2) indicates
that not support receiving FCS error packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.17

remotePortCountersInFcsErrors

The total number of FCS error packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.18

remotePortCountersOutFcsErrorsSupported

A value of true(1) indicates that supports transmitting
FCS error packet counts. A value of false(2) indicates
that not support transmitting FCS error packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.19

remotePortCountersOutFcsErrors

The total number of FCS error packets transmitted from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.20

remotePortCountersInGoodOctetsSupported

A value of true(1) indicates that supports receiving
normal packet counts. A value of false(2) indicates that
not support receiving normal packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.21

remotePortCountersInGoodOctets

The total number of normal packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.22

remotePortCountersOutGoodOctetsSupported

A value of true(1) indicates that supports transmitting
normal packet counts. A value of false(2) indicates that
not support transmitting normal packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.23

remotePortCountersOutGoodOctets

The total number of normal packets transmitted from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.24

remotePortCountersInBadOctetsSupported

A value of true(1) indicates that supports receiving
bad packet counts. A value of false(2) indicates that
not support receiving bad packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.25

remotePortCountersInBadOctets

The total number of bad packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.26

remotePortCountersInDiscardsSupported

A value of true(1) indicates that supports receiving
discard packet counts. A value of false(2) indicates
that not support receiving discard packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.27

remotePortCountersInDiscards

The total number of discard packets received from
remote port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.28

remotePortCountersAlignmentErrorsSupported

A value of true(1) indicates that supports align
error packet counts. A value of false(2) indicates that
not support alignment error packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.29

remotePortCountersAlignmentErrors

A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.30

remotePortCountersUndersizeErrorsSupported

A value of true(1) indicates that supports under
error packet counts. A value of false(2) indicates that
not support under error packet counts.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.31

remotePortCountersUndersizeErrors

The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.32

daiVlanTable

table

.1.3.6.1.4.1.259.8.2.1.1.56.2.1 · 1 row entry · 4 columns

Open in standard view

A table contains dynamic ARP inspection configurations
for existing VLANs.

daiVlanEntry entry .1.3.6.1.4.1.259.8.2.1.1.56.2.1.1

An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.

Indexes

daiVlanIndex

Column Syntax OID

daiVlanIndex

This object indicates the VLAN ID on which dynamic ARP
inspection is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.1

daiVlanStatus

This object indicates whether dynamic ARP inspection
is enabled in this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.2

daiVlanArpAclName

Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2).

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.3

daiVlanArpAclStatus

Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default v…

Enumerationr/w

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.4

daiPortTable

table

.1.3.6.1.4.1.259.8.2.1.1.56.3.1 · 1 row entry · 3 columns

Open in standard view

A table containing dynamic ARP inspection configurations
for port interfaces.

daiPortEntry entry .1.3.6.1.4.1.259.8.2.1.1.56.3.1.1

An instance containing the configuration of dynamic ARP
inspection at each port interface.

Indexes

daiPortIfIndex

Column Syntax OID

daiPortIfIndex

The ifIndex value of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.1

daiPortTrustStatus

This object indicates whether the port is trusted for
dynamic ARP inspection.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.2

daiPortRateLimit

The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit.

Unsigned32r/w

Constraints:
range: 0-2048
range: 4294967295-4294967295

.1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.3

daiLogTable

table

.1.3.6.1.4.1.259.8.2.1.1.56.4.1 · 1 row entry · 7 columns

Open in standard view

A table containing dynamic ARP inspection log
information.

daiLogEntry entry .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1

An instance containing log information of dynamic ARP
inspection at each VLAN interface.

Indexes

daiLogIndex

Column	Syntax	OID
daiLogIndex This object indicates the index of dynamic ARP inspection log information.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.1`
daiLogVlan This object indicates the VLAN ID of dynamic ARP inspection log information.	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.2`
daiLogPort This object indicates the ifIndex of dynamic ARP inspection log information.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.3`
daiLogSrcIpAddress The source IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.4`
daiLogDestIpAddress The destination IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.5`
daiLogSrcMacAddress The source MAC address of dynamic ARP inspection log information.	TOKEN-RING-RMON-MIBMacAddress Textual Convention: TOKEN-RING-RMON-MIBMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.6`
daiLogDestMacAddress The destination MAC address of dynamic ARP inspection log information.	TOKEN-RING-RMON-MIBMacAddress Textual Convention: TOKEN-RING-RMON-MIBMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.7`