EQLCONTROLLER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
81
.1.3.6.1.4.1.12740.4.1.1 · 1 row entry · 35 columns
EqualLogic-Dynamic Member Controller Table. 
This table contains controller status information. 
One table entry per controller. It is indexed by controller slot number. 
The number of entries is equal to the number of controllers that are present in the system
eqlControllerEntry entry .1.3.6.1.4.1.12740.4.1.1.1
An entry (row) containing controller status information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlControllerIndex
Column Syntax OID
eqlControllerIndex
The index value that uniquely identifies the controller.
It is equal to the controller slot number. The minimum slot number is 1
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.12740.4.1.1.1.1
eqlControllerModel
This variable specifies controller model. Is value of Part=
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.12740.4.1.1.1.2
eqlControllerCMRevision
CM version number; Is value of Rev=
OctetString
Constraints:
range: 0-9
.1.3.6.1.4.1.12740.4.1.1.1.3
eqlControllerSwRevision
This variable specifies the customer visible controller software revision.
OctetString
Constraints:
range: 0-96
.1.3.6.1.4.1.12740.4.1.1.1.4
eqlControllerBatteryStatus
This variable specifies controller battery status.
Enumeration
Enumerated Values:
1ok
2failed
3good-battery-is-charging
4low-voltage-status
5low-voltage-is-charging
6missing-battery
.1.3.6.1.4.1.12740.4.1.1.1.5
eqlControllerUpTime
This variable specifies time interval since the controller was last booted
in seconds.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.6
eqlControllerProcessorTemp
This variable specifies the temperature in Celsius.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.1.1.1.7
eqlControllerChipsetTemp
This variable specifies the temperature in Celsius.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.1.1.1.8
eqlControllerPrimaryOrSecondary
This variable specifies if the controller is a primary or secondary controller.
Enumeration
Enumerated Values:
1primary
2secondary
.1.3.6.1.4.1.12740.4.1.1.1.9
eqlControllerPrimaryFlashImageRev
The revision of the primary flash image.
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.12740.4.1.1.1.10
eqlControllerSecondaryFlashImageRev
The revision of the secondary flash image.
OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.12740.4.1.1.1.11
eqlControllerSerialNumber
This variable specifies controller serial number. Is value of SN=
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.1.1.1.12
eqlControllerDate
This variable specifies date of mfg of the CM. Is value of Date=
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.1.1.1.13
eqlControllerECO
This variable specifies eco level of the CM. Is value of ECO=
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.1.1.1.14
eqlControllerEEprom
The contents of the eeprom.
OctetString
Constraints:
range: 256-256
.1.3.6.1.4.1.12740.4.1.1.1.15
eqlControllerPLDrev
This variable specifies pld version number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.16
eqlControllerPlatformType
This variable specifies the platform type.
If the number is negative its a simulator.
If zero its an eval platform.
If >= 1 is the version of the pss board -- does this mean cm rev?
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.17
eqlControllerPlatformVersion
This variable specifies the version of the pss board (ie CM?)
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.18
eqlControllerCPUPass
This variable specifies silicon rev.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.19
eqlControllerCPUrev
This variable specifies the revision of the cpu.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.20
eqlControllerCPUfreq
This variable specifies the cpu freq in MHz.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.21
eqlControllerPhysRam
This variable specifies the amount of physical memory in MB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.22
eqlControllerBootRomVersion
This variable specifies the bootrom version number.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.1.1.1.23
eqlControllerBootRomBuildDate
This variable specifies the date and time bootrom image was built.
OctetString
Constraints:
range: 128-128
.1.3.6.1.4.1.12740.4.1.1.1.24
eqlControllerInfoMsg
This variable is basic info on the cpu at bootup.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.12740.4.1.1.1.25
eqlControllerAthenaSataVersion
This variable is the Athena Sata revision for all Athena chips.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.12740.4.1.1.1.26
eqlControllerMajorVersion
This variable specifies the major version number of the
software present on the controller module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.27
eqlControllerMinorVersion
This variable specifies the minor version number of the
software present on the controller module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.28
eqlControllerMaintenanceVersion
This variable specifies the maintenance version number of the
software present on the controller module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.29
eqlControllerSWCompatibilityLevel
This variable specifies the compatibility level of the
software present on the controller module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.30
eqlControllerFullSwRevision
This variable specifies controller software revision.
OctetString
Constraints:
range: 0-96
.1.3.6.1.4.1.12740.4.1.1.1.31
eqlControllerNVRAMBattery
This variable represents the NVRAM Battery on CM.
Value would be zero if there is no NVRAM Battery( old CM).
Enumeration
Enumerated Values:
0not-present
1good
2bad
3unknown
.1.3.6.1.4.1.12740.4.1.1.1.32
eqlControllerSerialNumber2
This variable specifies controller serial number. Is value of SN=.The eqlControllerSerialNumber is deprecated
because this value can be upto 15 characters for manhattan.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.12740.4.1.1.1.33
eqlControllerType
This variable specifies the type of the controller module. Ex: Type II
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.12740.4.1.1.1.34
eqlControllerBootTime
This variable specifies time at which the controller was booted expressed as seconds since epoch.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.12740.4.1.1.1.35
.1.3.6.1.4.1.12740.4.4.1 · 1 row entry · 10 columns
EqualLogic-Dynamic Backplane Table. 
This table contains backplane status information. 
There is only one table entry for the one backplane per PSA.
eqlBackplaneEntry entry .1.3.6.1.4.1.12740.4.4.1.1
An entry (row) containing backplane status information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlBackplaneIndex
Column Syntax OID
eqlBackplaneIndex
The index value that uniquely identifies the backplane.
A well chosen number for the index is 1. It is in fact the only valid index.
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.12740.4.4.1.1.1
eqlBackplanePartNum
This variable specifies part number of the backplane.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.4.1.1.2
eqlBackplaneRev
This variable specifies revision of the backplane. Is value of Rev=
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.4.1.1.3
eqlBackplaneDate
This variable specifies date of mfg of the backplane.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.4.1.1.4
eqlBackplaneSN
This variable specifies serial number of the backplane.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.4.1.1.5
eqlBackplaneECO
This variable specifies eco level of the backplane.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.4.1.1.6
eqlBackplaneEEprom
The contents of the eeprom.
OctetString
Constraints:
range: 256-256
.1.3.6.1.4.1.12740.4.4.1.1.7
eqlBackplaneSN2
This variable specifies the backplane serial number. Is value of SN=.The eqlBackplaneSN is deprecated
because this value can be up to 15 characters for manhattan.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.12740.4.4.1.1.8
eqlBackplaneType
This variable specifies the backplane type.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.12740.4.4.1.1.9
eqlBackplaneTypeId
This variable specifies the backplane type as an Id. Used for Globalization.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.4.1.1.10
.1.3.6.1.4.1.12740.4.7.1 · 1 row entry · 9 columns
EqualLogic-Dynamic Member EMM Table. 
This table contains enclosure management status information. 
One table entry per emm. It is indexed by emm index.
The number of entries is equal to the number of emms that are present in the system
eqlEMMEntry entry .1.3.6.1.4.1.12740.4.7.1.1
An entry (row) containing emm status information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlEMMIndex
Column Syntax OID
eqlEMMIndex
The index value that uniquely identifies the EMM subsystem.
Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.12740.4.7.1.1.1
eqlEMMModel
This variable specifies controller model. Is value of Part=
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.12740.4.7.1.1.2
eqlEMMPartNum
This variable specifies part number of the CM.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.7.1.1.3
eqlEMMRev
This variable specifies revision of the CM.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.7.1.1.4
eqlEMMDate
This variable specifies date of mfg of the CM.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.7.1.1.5
eqlEMMSN
This variable specifies serial number of the CM.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.7.1.1.6
eqlEMMECO
This variable specifies eco level of the CM.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.7.1.1.7
eqlEMMEEprom
The contents of the eeprom.
OctetString
Constraints:
range: 256-256
.1.3.6.1.4.1.12740.4.7.1.1.8
eqlEMMSN2
This variable specifies the serial number. Is value of SN=.The eqlEMMSN is deprecated
because this value can be up to 15 characters for manhattan.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.12740.4.7.1.1.9
.1.3.6.1.4.1.12740.4.10.1 · 1 row entry · 8 columns
EqualLogic-Dynamic Member DaughterCard Table. 
This table contains daughter card information. 
One table entry per daughter card. It is indexed by daughter card index.
The number of entries is equal to the number of daughter cards that are present in the system
eqlDaughterCardEntry entry .1.3.6.1.4.1.12740.4.10.1.1
An entry (row) containing daughter card information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlDaughterCardIndex
Column Syntax OID
eqlDaughterCardIndex
The index value that uniquely identifies the DaughterCard subsystem. 1 based
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.12740.4.10.1.1.1
eqlDaughterCardModel
This variable specifies controller model. Is value of Part=
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.12740.4.10.1.1.2
eqlDaughterCardPartNum
This variable specifies part number of the daughter card.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.10.1.1.3
eqlDaughterCardRev
This variable specifies revision of the daughter card.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.10.1.1.4
eqlDaughterCardDate
This variable specifies date of mfg of the daughter card.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.10.1.1.5
eqlDaughterCardSN
This variable specifies serial number of the daughter card.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.10.1.1.6
eqlDaughterCardECO
This variable specifies eco level of the daughter card.
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.12740.4.10.1.1.7
eqlDaughterCardEEprom
The contents of the eeprom.
OctetString
Constraints:
range: 256-256
.1.3.6.1.4.1.12740.4.10.1.1.8
.1.3.6.1.4.1.12740.4.13.1 · 1 row entry · 5 columns
EqualLogic-Dynamic Member ChannelCard Table. 
This table contains channel card information. 
One table entry per channel card. It is indexed by channel card index.
The number of entries is equal to the number of channel cards that are present in the system
eqlChannelCardEntry entry .1.3.6.1.4.1.12740.4.13.1.1
An entry (row) containing channel card information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlChannelCardIndex
Column Syntax OID
eqlChannelCardIndex
The index value that uniquely identifies the ChannelCard subsystem.
Unsigned32
Constraints:
range: 1-100
.1.3.6.1.4.1.12740.4.13.1.1.1
eqlChannelCardSerialNumber
This variable specifies serial number of the card.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.12740.4.13.1.1.2
eqlChannelCardFirmwareRev
This variable specifies firmware revision of the card.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.12740.4.13.1.1.3
eqlChannelCardInitRev
This variable specifies revision of the initialization configuration file.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.12740.4.13.1.1.4
eqlChannelCardStatus
This variable specifies the status of the channel card .
Enumeration
Enumerated Values:
0unknown
1not-present
2failed
3good
.1.3.6.1.4.1.12740.4.13.1.1.5
.1.3.6.1.4.1.12740.4.14.1 · 1 row entry · 14 columns
EqualLogic-Dynamic Member SFP Table. 
This table contains SFP information. 
One table entry per SFP. It is indexed by SFP index.
The number of entries is equal to the number of SFPs that are present in the system
eqlSFPEntry entry .1.3.6.1.4.1.12740.4.14.1.1
An entry (row) containing SFP information.
Indexes
EQLGROUP-MIBeqlGroupId EQLMEMBER-MIBeqlMemberIndex eqlSFPIndex
Column Syntax OID
eqlSFPIndex
The index value that uniquely identifies the SFP.
Unsigned32
Constraints:
range: 1-100
.1.3.6.1.4.1.12740.4.14.1.1.1
eqlSFPMode
This variable specifies the mode of the SFP.
Enumeration
Enumerated Values:
0unknown
1single-mode
2multi-mode
3copper
4not-present
.1.3.6.1.4.1.12740.4.14.1.1.2
eqlSFPIfIndex
Index of the interface attached to the SFP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.14.1.1.3
eqlSFPIdentifier
Identifies the SFP.
Enumeration
Enumerated Values:
0unknown
3sfp-transceiver
.1.3.6.1.4.1.12740.4.14.1.1.4
eqlSFPConnector
type of the SFP connector.
Enumeration
Enumerated Values:
0unknown
7lc
33copper
.1.3.6.1.4.1.12740.4.14.1.1.5
eqlSFPBitrate
Bit rate of the SFP in units of 100 Mbits/sec.
103 => 10300 => 10 Gbps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.14.1.1.6
eqlSFPLength1
If Mode is single mode, length in kilometres,
Mode is multi mode, length in units of 10metres of 50/125 um fiber.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.14.1.1.7
eqlSFPLength2
If Mode is single mode, length in units of 100metres,
Mode is multi mode, length in units of 10metres of 62/125 um fiber.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.12740.4.14.1.1.8
eqlSFPVendorName
This variable specifies vendor name of the SFP.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.14.1.1.9
eqlSFPPartNumber
This variable specifies part number of the SFP.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.14.1.1.10
eqlSFPFirmwareRev
This variable specifies firmware revision of the SFP.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.14.1.1.11
eqlSFPSerialNumber
This variable specifies serial number of the SFP.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.14.1.1.12
eqlSFPDateCode
This variable specifies date of manufacture of the SFP.
OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.12740.4.14.1.1.13
eqlSFPStatus
This variable specifies the status of the SFP.
Enumeration
Enumerated Values:
0unknown
1not-present
2failed
3good
.1.3.6.1.4.1.12740.4.14.1.1.14