ELTEX-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

eltPolicyClassifierTable

table

.1.3.6.1.4.1.35265.1.23.59.2.4 · 1 row entry · 4 columns

Open in standard view

The table of Classifier statement.

eltPolicyClassifierEntry entry .1.3.6.1.4.1.35265.1.23.59.2.4.1

Classifiers can be of the ingress or post-routing phase
varieties.
Each multifield classification statement consists of the
following parameters.

Indexes

No indexes recorded

Column	Syntax	OID
eltPolicyClassifierInListVlanId1To1024 Classifier ingress VlanId List 1.	OctetStringr/w	`.1.3.6.1.4.1.35265.1.23.59.2.4.1.1`
eltPolicyClassifierInListVlanId1025To2048 Classifier ingress VlanId List 2.	OctetStringr/w	`.1.3.6.1.4.1.35265.1.23.59.2.4.1.2`
eltPolicyClassifierInListVlanId2049To3072 Classifier ingress VlanId List 3.	OctetStringr/w	`.1.3.6.1.4.1.35265.1.23.59.2.4.1.3`
eltPolicyClassifierInListVlanId3073To4096 Classifier ingress VlanId List 4.	OctetStringr/w	`.1.3.6.1.4.1.35265.1.23.59.2.4.1.4`

eltPolicyVptDscpTable

table

.1.3.6.1.4.1.35265.1.23.59.3.1 · 1 row entry · 3 columns

Open in standard view

This table specifies The VPT to DSCP map table

eltPolicyVptDscpEntry entry .1.3.6.1.4.1.35265.1.23.59.3.1.1

Each entry in this table describes The DSCP assigned to a VPT value.
The index is VPT represent by eltPolicyVptValue.

Indexes

eltPolicyVptValue

Column Syntax OID

eltPolicyVptValue

VPT value.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.35265.1.23.59.3.1.1.1

eltPolicyDscpValue

DSCP value.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.35265.1.23.59.3.1.1.2

eltPolicyVptDscpStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.35265.1.23.59.3.1.1.3

eltPolicyTrustModeTable

table

.1.3.6.1.4.1.35265.1.23.59.3.2 · 1 row entry · 1 columns

Open in standard view

Specifies The QoS trust mode for the interfaces in basic mode

eltPolicyTrustModeEntry entry .1.3.6.1.4.1.35265.1.23.59.3.2.1

Specifies The QoS trust mode for the interface in basic mode

Indexes

No indexes recorded

Column Syntax OID

eltPolicyTrustModePortMode

Defines the interface qos trust operation mode relevant for qos basic mode.

EltPolicyTrustTypesr/w

Textual Convention: EltPolicyTrustTypes Enumeration

Type Values:

0	none
1	cos
2	dscp
3	cos-dscp

.1.3.6.1.4.1.35265.1.23.59.3.2.1.1

eltPolicyVlanConfigurationTable

table

.1.3.6.1.4.1.35265.1.23.59.5.1 · 1 row entry · 2 columns

Open in standard view

This table enables the network administrator to fine-tune
the rate limit in pps given to each vlan.
The values in this table will thus override those of the
rlQosIfPolicyTable (THIS TABLE IS MANAGED FROM 3SW).

eltPolicyVlanCfgEntry entry .1.3.6.1.4.1.35265.1.23.59.5.1.1

Configuration parameters for each vlan.

Indexes

No indexes recorded

Column	Syntax	OID
eltPolicyVlanCfgCirPortRateLimitPps The CIR for the port Rate limit in packets per second. CIR equal to 0 means that the rate limit does not apply to traffic in this vlan.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.1.23.59.5.1.1.1`
eltPolicyVlanCfgCbsPortRateLimitPackets The CBS for the port Rate Limit in packets.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.1.23.59.5.1.1.2`

eltPolicyMeterClassTable

table

.1.3.6.1.4.1.35265.1.23.59.6.1 · 1 row entry · 2 columns

Open in standard view

This table defines the Metering classes for the system.

eltPolicyMeteringClassEntry entry .1.3.6.1.4.1.35265.1.23.59.6.1.1

Each statement consists of the following parameters

Indexes

No indexes recorded

Column	Syntax	OID
eltPolicyMeteringClassAggregateMeterRatePps The rate in packets per second of traffic considered within the bandwidth allocated for this policy entry. Rate equal to 0 means that the rate limit does not apply to traffic.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.1.23.59.6.1.1.1`
eltPolicyMeteringClassAggregateMeterBurstSizePackets The Burst Size parameter for the aggregate meter leaky bucket in packets	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.1.23.59.6.1.1.2`

eltPolicyActionTable

table

.1.3.6.1.4.1.35265.1.23.59.7.2 · 1 row entry · 2 columns

Open in standard view

This table defines the Actions for packets that pass the meter table
ie. the characteristics that are assigned to packets before they
reach the scheduler.

eltPolicyActionEntry entry .1.3.6.1.4.1.35265.1.23.59.7.2.1

Each multifield classification statement consists of the following
parameters

Indexes

No indexes recorded

Column Syntax OID

eltPolicyPpsActionNonDsOutProfileDropPrecedence

This paramer is used at non diffserv mode to attached the drop precedence
for packet OutProfile (metering), only if there is a support for drop precedence
and with what level.

Enumerationr/w

Enumerated Values:

1	low
2	medium
3	high
4	drop

.1.3.6.1.4.1.35265.1.23.59.7.2.1.1

eltPolicyPpsActionChangeDscpNonConform

If true, the packet is re-marked with the value indicated by
newDscp for non conforming packets.
If false, the packet's DSCP value is not changed

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.35265.1.23.59.7.2.1.2