ELTEX-MES-eltInterfaces Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
21

eltSwIfTable

table
.1.3.6.1.4.1.35265.1.23.43.1 · 1 row entry · 11 columns
Open in standard view 
Switch media specific information and configuration of the device
interfaces.
eltSwIfEntry entry .1.3.6.1.4.1.35265.1.23.43.1.1
Defines the contents of each line in the eltSwIfTable table.
Indexes
eltSwIfIndex
Column Syntax OID
eltSwIfIndex
Index to the eltSwIfTable. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIB II).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.1.23.43.1.1.1
eltSwIfSfpOperationMode
This variable indicates plugged in SFP transceiver operation mode.
Enumeration
Enumerated Values:
0fiber
1directAttach
2copperSfp
3unknown
 .1.3.6.1.4.1.35265.1.23.43.1.1.2
eltSwIfAutoNegotiationBypass
When enabled the link can be established by bypassing the Auto-Negotiation procedure
if the link partner doesn't respond to the Auto-Negotiation process.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3forced
 .1.3.6.1.4.1.35265.1.23.43.1.1.3
eltSwIfLockMaxMacAddressesVoiceVlan
This variable defines the maximum number of dynamic VoiceVlan addresses that
can be associated with the locked interface. It isn't relevant in
disabled limitation mode.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35265.1.23.43.1.1.4
eltSwIfLockMaxMacAddressesDataVlan
This variable defines the maximum number of dynamic DataVlan addresses that
can be associated with the locked interface. It isn't relevant in
disabled limitation mode.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35265.1.23.43.1.1.5
eltSwIfLockMacAddressesCountVoiceVlan
This variable indicates the actual number of dynamic VoiceVlan addresses that can
be associated with the locked interface. It isn't relevant in disabled
limitation mode.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35265.1.23.43.1.1.6
eltSwIfLockMacAddressesCountDataVlan
This variable indicates the actual number of dynamic DataVlan addresses that can
be associated with the locked interface. It isn't relevant in disabled
limitation mode.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35265.1.23.43.1.1.7
eltSwIfLockSuspendedVlanId1To1024
This object indicates the VLAN range (1-1024)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.35265.1.23.43.1.1.8
eltSwIfLockSuspendedVlanId1025To2048
This object indicates the VLAN range (1025-2048)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.35265.1.23.43.1.1.9
eltSwIfLockSuspendedVlanId2049To3072
This object indicates the VLAN range (2049-3072)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.35265.1.23.43.1.1.10
eltSwIfLockSuspendedVlanId3073To4094
This object indicates the VLAN range (3073-4094)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.35265.1.23.43.1.1.11

eltSwIfUtilizationTable

table
.1.3.6.1.4.1.35265.1.23.43.2 · 1 row entry · 10 columns
Open in standard view 
Switch ports utilization configuration and information.
eltSwIfUtilizationEntry entry .1.3.6.1.4.1.35265.1.23.43.2.1
Defines the contents of each line in the eltSwIfUtilizationTable table.
Indexes
eltSwIfUtilizationIfIndex
Column Syntax OID
eltSwIfUtilizationIfIndex
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.1.23.43.2.1.1
eltSwIfUtilizationAverageTime
An average load time in seconds for which interface
utilization is calculated.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.1.23.43.2.1.2
eltSwIfUtilizationCurrentInPkts
The total number of all (UC, MC and BC) packets
received on the interface during last 5 seconds.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.3
eltSwIfUtilizationCurrentInRate
The inbound rate in kbit/sec
on the interface during last 5 seconds.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.4
eltSwIfUtilizationCurrentOutPkts
The total number of all (UC, MC and BC) packets
sent out of the interface during last 5 seconds.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.5
eltSwIfUtilizationCurrentOutRate
The outbound rate in kbit/sec
on the interface during last 5 seconds.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.6
eltSwIfUtilizationAverageInPkts
The total number of all (UC, MC and BC) packets
received on the interface during configured
load average time for this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.7
eltSwIfUtilizationAverageInRate
The inbound rate in kbit/sec on the interface
during configured load average time for this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.8
eltSwIfUtilizationAverageOutPkts
The total number of all (UC, MC and BC) packets
sent out of the interface during configured
load average time for this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.9
eltSwIfUtilizationAverageOutRate
The outbound rate in kbit/sec on the interface
during configured load average time for this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.35265.1.23.43.2.1.10