EDGECORE-vlan-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
30
Rows
30
Columns
86

vlanNameTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.21 · 1 row entry · 3 columns
Open in standard view 
This table translates Vlan name to Vlan's tag and ifindex
vlanNameEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.21.1
The row definition for this table.
Indexes
vlanNameName
Column Syntax OID
vlanNameName
The Vlan's name
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.259.10.1.14.89.48.21.1.1
vlanNameTag
The Vlan's tag
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.21.1.2
vlanNameIfIndex
The Vlan's ifindex
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.21.1.3

vlanPortModeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.22 · 1 row entry · 1 columns
Open in standard view 
This table hold information on port status trunk or access
vlanPortModeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.22.1
The row definition for this table.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeState
The port state, 1 is generic cli
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.22.1.1

vlanSpecialTagTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.33 · 1 row entry · 2 columns
Open in standard view 
special vlan tag used for this port
vlanSpecialTagEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.33.1
entry of special tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSpecialTagVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.33.1.1
vlanSpecialTagStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.33.1.2

vlanSpecialTagCurrentTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.34 · 1 row entry · 3 columns
Open in standard view 
special Current vlan tag used for this port
vlanSpecialTagCurrentEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.34.1
entry of Current special tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSpecialTagCurrentVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.34.1.1
vlanSpecialTagCurrentReserved
specify if the special vlan tag is reserved .
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.14.89.48.34.1.2
vlanSpecialTagCurrentActive
specify if the special vlan tag is used .
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.14.89.48.34.1.3

vlanPrivateEdgeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.37 · 1 row entry · 2 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.37.1
entry of pve
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPrivateEdgeUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.14.89.48.37.1.1
vlanPrivateEdgeStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.37.1.2

vlanDynamicVlanTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.39 · 1 row entry · 3 columns
Open in standard view 
table for DynamicVlan
vlanDynamicVlanEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.39.1
entry of DynamicVlan
Indexes
vlanDynamicVlanMacAddress
Column Syntax OID
vlanDynamicVlanMacAddress
mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.259.10.1.14.89.48.39.1.1
vlanDynamicVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.39.1.2
vlanDynamicVlanStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.39.1.3

vlanPortModeExtTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.40 · 1 row entry · 2 columns
Open in standard view 
This table hold information on port status trunk or access
vlanPortModeExtEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.40.1
The row definition for this table.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeExtState
The ext
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.40.1.1
vlanPortModeExtStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.40.1.2

vlanPrivateTableOld

table
.1.3.6.1.4.1.259.10.1.14.89.48.42 · 1 row entry · 2 columns
Open in standard view 
table for PrivateVlan
vlanPrivateEntryOld entry .1.3.6.1.4.1.259.10.1.14.89.48.42.1
entry of PrivateVlan
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
vlanPrivateOldIsolatedVlanTag
vlan Tag
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.259.10.1.14.89.48.42.1.1
vlanPrivateOldStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.42.1.2

vlanPrivateCommunityTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.43 · 1 row entry · 2 columns
Open in standard view 
table for PrivateVlan
vlanPrivateCommunityEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.43.1
entry of PrivateVlan
Indexes
Q-BRIDGE-MIBdot1qVlanIndex vlanPrivateCommunityVlanTag
Column Syntax OID
vlanPrivateCommunityVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.43.1.1
vlanPrivateCommunityStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.43.1.2

vlanMulticastTvTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.44 · 1 row entry · 2 columns
Open in standard view 
multicast vlan used for this port
vlanMulticastTvEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.44.1
entry of multicast tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanMulticastTvVID
specify the TV vlan tag, vlan must exist .
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.44.1.1
vlanMulticastTvStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.44.1.2

vlanMacBaseVlanGroupTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.45 · 1 row entry · 4 columns
Open in standard view 
A table that contains mappings from Range of MAC
addresses to Group Identifiers used for
MAC-based VLAN Classification.
vlanMacBaseVlanGroupEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.45.1
A mapping from a Range of MAC addresses to a
Group Identifier.
Indexes
vlanMacBaseVlanMacAddress vlanMacBaseVlanMacMask
Column Syntax OID
vlanMacBaseVlanMacAddress
The base MAC address of the range.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.259.10.1.14.89.48.45.1.1
vlanMacBaseVlanMacMask
The Mask of the range.
The mask determains the leading '1' bits of the mask (MSB).
48 means single HOST and 9 means the widest range.
The MASK is limited to 9 to avoid entring ranges including
multicast addresses.
Integer32
Constraints:
range: 9-48
 .1.3.6.1.4.1.259.10.1.14.89.48.45.1.2
vlanMacBaseVlanGroupId
Represents a group of ranges of MAC addresses
that are associated together when assigning a
VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.45.1.3
vlanMacBaseVlanGroupRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.45.1.4

vlanMacBaseVlanPortTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.46 · 1 row entry · 3 columns
Open in standard view 
A table that contains VID sets used for
MAC-based VLAN Classification.
vlanMacBaseVlanPortEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.46.1
A VID set for a port and group.
Indexes
BRIDGE-MIBdot1dBasePort vlanMacBaseVlanPortGroupId
Column Syntax OID
vlanMacBaseVlanPortGroupId
Designates a group of Ranges in the ranges
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.46.1.1
vlanMacBaseVlanPortGroupVid
The VID associated with a group of range MAC addresses for
each port.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.46.1.2
vlanMacBaseVlanPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.46.1.3

vlanPrivateEdgeGroupTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.47 · 1 row entry · 3 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeGroupEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.47.1
entry of pve
Indexes
vlanPrivateEdgeGroupSource
Column Syntax OID
vlanPrivateEdgeGroupSource
specify the uplink group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.14.89.48.47.1.1
vlanPrivateEdgeGroupUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.14.89.48.47.1.2
vlanPrivateEdgeGroupStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.47.1.3

vlanPrivateEdgeGroupIfIndexTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.48 · 1 row entry · 2 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeGroupIfIndexEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.48.1
entry of pve
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPrivateEdgeGroupIfIndexID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.14.89.48.48.1.1
vlanPrivateEdgeGroupIfIndexDomainID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.14.89.48.48.1.2

vlanSubnetRangeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.49 · 1 row entry · 4 columns
Open in standard view 
A table that contains mappings from subnet
range to Group Identifiers used for
Port-and-subnet-based VLAN Classification.
vlanSubnetRangeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.49.1
A mapping from a subnet to a
Group Identifier.
Indexes
vlanSubnetRangeAddr vlanSubnetRangeMask
Column Syntax OID
vlanSubnetRangeAddr
The IP address of the range
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.48.49.1.1
vlanSubnetRangeMask
The numbers of continuous ones in the mask
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.259.10.1.14.89.48.49.1.2
vlanSubnetRangeGroupId
Represents a group of subnets that are associated
together when assigning a VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.49.1.3
vlanSubnetRangeRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.49.1.4

vlanSubnetPortTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.50 · 1 row entry · 3 columns
Open in standard view 
A table that contains VID sets used for
Port-and-subnet-based VLAN Classification.
vlanSubnetPortEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.50.1
A VID set for a port.
Indexes
BRIDGE-MIBdot1dBasePort vlanSubnetPortGroupId
Column Syntax OID
vlanSubnetPortGroupId
Designates a group of subnets in the
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.50.1.1
vlanSubnetPortGroupVid
The VID associated with a group of subnets for
each port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.259.10.1.14.89.48.50.1.2
vlanSubnetPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.50.1.3

vlanTriplePlayTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.51 · 1 row entry · 3 columns
Open in standard view 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanTriplePlayEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.51.1
entry of TriplePlay table
Indexes
vlanTriplePlayInnerVID
Column Syntax OID
vlanTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.51.1.1
vlanTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.51.1.2
vlanTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.51.1.3

vlanTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.52 · 1 row entry · 2 columns
Open in standard view 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanTriplePlayMulticatTvEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.52.1
entry of triple play MulticastTv table
Indexes
vlanTriplePlayMulticastTvMulticastTvVID
Column Syntax OID
vlanTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.52.1.1
vlanTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.259.10.1.14.89.48.52.1.2

vlanVoiceTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.54.2 · 1 row entry · 3 columns
Open in standard view 
A table containing static configuration information for
each voice VLAN configured into the device and dynamic port membership.
All entries are permanent and will
be restored after the device is reset.
vlanVoiceEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.54.2.1
Information for a voice VLAN configured into the device by management.
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
vlanVoicePriority
An administratively assigned Priority, which will be used
for all traffic on the voice vlan, this gives the packets
the requested priority (CoS) within the bridge.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.259.10.1.14.89.48.54.2.1.1
vlanVoicePriorityRemark
Remark VPT on tagged frames egress the voice vlan according.
to priority true.false
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.14.89.48.54.2.1.2
vlanVoiceRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.54.2.1.3

vlanVoiceOUITable

table
.1.3.6.1.4.1.259.10.1.14.89.48.54.3 · 1 row entry · 3 columns
Open in standard view 
A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset.
vlanVoiceOUIEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.54.3.1
Information for a voice VLANs OUI MAC Prefixes configured into the
device by management.
Indexes
vlanVoiceOUIPrefix
Column Syntax OID
vlanVoiceOUIPrefix
The index value used to identify the OUI MAC Prefix component
associated with this entry.

The value of this object is used as an index to the
vlanVoiceOUITable.

Voice VLANs OUI Prefix is th…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.259.10.1.14.89.48.54.3.1.1
vlanVoiceOUIDescription
An optional text that describes the OUI.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.259.10.1.14.89.48.54.3.1.2
vlanVoiceOUIEntryRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.54.3.1.3

vlanVoicePortTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.54.4 · 1 row entry · 5 columns
Open in standard view 
A table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset.
vlanVoicePortEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1
Static and dynamic per port information for a voice VLAN.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanVoicePortEnable
Enable this port to be a candidate to be added into the Voice VLAN.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1.1
vlanVoicePortVlanIndex
The Voice VLAN-ID the port is a candidate to be in.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1.2
vlanVoicePortSecure
Specify this port to be in Secure Mode when entering the Voice VLAN.
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
are accepted, otherwise dropped.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1.3
vlanVoicePortCurrentMembership
Port's current status of membership in Voice VLAN.

Port's possible values of membership in Voice VLAN:
'Active(1)' - Port is currently added to a Voice VLAN .
'NotActive(2)' - Specifies either that p…
Enumeration
Enumerated Values:
1active
2notActive
 .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1.4
vlanVoicePortQosMode
Port's current QOS mode in Voice VLAN.
Possible values:
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
'all(2)' - All traffic through that port received QOS of the Voice Vlan.
Enumerationr/w
Enumerated Values:
1src
2all
 .1.3.6.1.4.1.259.10.1.14.89.48.54.4.1.5

vlanInetTriplePlayTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.56 · 1 row entry · 4 columns
Open in standard view 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanInetTriplePlayEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.56.1
entry of TriplePlay table
Indexes
vlanInetTriplePlayInetAddressType vlanTriplePlayInnerVID
Column Syntax OID
vlanInetTriplePlayInetAddressType
Inet type IPv4/IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.259.10.1.14.89.48.56.1.1
vlanInetTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.56.1.2
vlanInetTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.56.1.3
vlanInetTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.56.1.4

vlanInetTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.57 · 1 row entry · 2 columns
Open in standard view 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanInetTriplePlayMulticatTvEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.57.1
entry of triple play MulticastTv table
Indexes
vlanTriplePlayMulticastTvMulticastTvVID
Column Syntax OID
vlanInetTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.57.1.1
vlanInetTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.259.10.1.14.89.48.57.1.2

vlanPrivateTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.59 · 1 row entry · 4 columns
Open in standard view 
Private vlan table which contains the private vlan entries.
vlanPrivateEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.59.1
Private vlan entry which contains the private vlan definition.
Indexes
vlanPrivateVid
Column Syntax OID
vlanPrivateVid
The static vlan ID which is set to one of the
private vlan types.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.59.1.1
vlanPrivateType
private vlan types:
primary - Carries traffic from promiscuous ports.
promiscuous port can communicate with all ports of the
same PVLAN, including the isolated and community
por…
Enumerationr/w
Enumerated Values:
1primary
2isolated
3community
 .1.3.6.1.4.1.259.10.1.14.89.48.59.1.2
vlanPrivatePrimaryVid
The primary vlan ID which has defined in VlanPrivateEntry and which is
associated with secondary vlan (in vlanPrivateMapTable).
vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is
primary vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.59.1.3
vlanPrivateStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.59.1.4

vlanPrivateMapTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.60 · 1 row entry · 5 columns
Open in standard view 
Private vlan mapping table which contains the private vlan mapping entries.
vlanPrivateMapEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.60.1
Private vlan mapping entry which contains the primary / secondary
private vlan association and their ports membership.
Indexes
vlanPrivateMapPrimaryVid vlanPrivateMapSecondaryVid
Column Syntax OID
vlanPrivateMapPrimaryVid
The primary private vlan ID which is associated with the secondary
(isolated or community) vlan (vlanPrivateMapSecondaryVid).
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.60.1.1
vlanPrivateMapSecondaryVid
The secondary private vlan ID which is associated with the primary
vlan (vlanPrivateMapPrimaryVid).
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.60.1.2
vlanPrivateMapPrimaryPorts
The private vlan promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.259.10.1.14.89.48.60.1.3
vlanPrivateMapSecondaryPorts
The private vlan host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.259.10.1.14.89.48.60.1.4
vlanPrivateMapStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.48.60.1.5

vlanTrunkPortModeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.61 · 1 row entry · 5 columns
Open in standard view 
The tables contains trunk mode port entries.
vlanTrunkPortModeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.61.1
The entry contains port ifIndex,native vlan id and vlan list the port has a membership.
The vlan list can contain not created vlans.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanTrunkPortModeNativeVlanId
Indicated native vlan index.Default value 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.61.1.1
vlanTrunkModeList1to1024
vlan trunk mode list 1. Default value is {0}
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.61.1.2
vlanTrunkModeList1025to2048
vlan trunk mode list 2. Default value is {0}
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.61.1.3
vlanTrunkModeList2049to3072
vlan trunk mode list 3. Default value is {0}
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.61.1.4
vlanTrunkModeList3073to4094
vlan trunk mode list 4. Default value is {0}
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.61.1.5

vlanAccessPortModeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.62 · 1 row entry · 2 columns
Open in standard view 
The tables contains access mode port entries.
vlanAccessPortModeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.62.1
The entry contains port ifIndex,access vlan id and multicast TV vlan id.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanAccessPortModeVlanId
Indicated access vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.62.1.1
vlanAccessPortModeMcstTvVlanId
Indicated multicast TV vlan id.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.62.1.2

vlanCustomerPortModeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.63 · 1 row entry · 5 columns
Open in standard view 
The tables contains customer mode port entries.
vlanCustomerPortModeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.63.1
The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanCustomerPortModeVlanId
Indicated customer vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.259.10.1.14.89.48.63.1.1
vlanCustomerPortModeMtvList1to1024
vlan customer port mode multicast TV list 1. Default value is {0}
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.63.1.2
vlanCustomerPortModeMtvList1025to2048
vlan customer port mode multicast TV list 2. Default value is {0}
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.63.1.3
vlanCustomerPortModeMtvList2049to3072
vlan customer port mode multicast TV list 3. Default value is {0}
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.63.1.4
vlanCustomerPortModeMtvList3073to4094
vlan customer port mode multicast TV list 4. Default value is {0}
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.14.89.48.63.1.5

vlanSwitchPortModeTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.64 · 1 row entry · 1 columns
Open in standard view 
The table defines L3/L2 port context.
vlanSwitchPortModeEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.64.1
The entry contains port ifIndex and switch port enable value.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSwitchPortModeCategory
Indicated if a port is switchport (l2 port) or no switchport (l3 port)
1 - switchport
2 - no switchport. Default is 1
Enumerationr/w
Enumerated Values:
1l2
2l3
 .1.3.6.1.4.1.259.10.1.14.89.48.64.1.1

vlanPortModeContextTable

table
.1.3.6.1.4.1.259.10.1.14.89.48.65 · 1 row entry · 1 columns
Open in standard view 
The tables contains current port mode context entries.
vlanPortModeContextEntry entry .1.3.6.1.4.1.259.10.1.14.89.48.65.1
The entry contains current port mode context.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeContextValue
Indicated port context value:
0. Lag
1. Monitor
2. L3
3. RAVA
4. Dot1x
5. Dot1q
6. Access
7. Trunk
8. Customer
9. PV_promisc
10. PV_host
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.48.65.1.1