EDGECORE-IP Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
41

rsIpAddrTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.1 · 1 row entry · 14 columns
Open in standard view 
This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.
rsIpAddrEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.1.1
The addressing information for one of this
entity's IP addresses.
Indexes
rsIpAdEntAddr
Column Syntax OID
rsIpAdEntAddr
The IP address to which this entry's addressing
information pertains.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.1
rsIpAdEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.2
rsIpAdEntNetMask
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.3
rsIpAdEntForwardIpBroadcast
This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.4
rsIpAdEntBackupAddr
In case there are two IP routers in the domain,
the address of the second IP router.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.5
rsIpAdEntStatus
The validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II).
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.6
rsIpAdEntBcastAddr
Indicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.7
rsIpAdEntArpServer
Indicates whether the router will reply to incoming ARP requests on
this interface, providing the physical address corresponding to this
IP interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.8
rsIpAdEntName
The IP Interface name
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.9
rsIpAdEntOwner
The IP Interface owner. Static if interface defined by user, dhcp
if received by boot protocol like DHCP and internal
for internal usage.
Enumerationr/w
Enumerated Values:
1static
2dhcp
3internal
4default
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.10
rsIpAdEntAdminStatus
The IP Interface admin status.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.11
rsIpAdEntOperStatus
If active the interface can be used to send and receive frames.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.12
rsIpAdEntPrecedence
The IP preference, to be selected as source IP for rsIpAdEntIfIndex.
this source IP selection is first by preference value.
if more than one IP has the same preference the one with the
lowest IP is selected.
(higher val…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.13
rsIpAdEntUniqueStatus
The IP address unique status defines IP address
state in an assignment process and
after duplication detection.
Enumeration
Enumerated Values:
1valid
2validDuplicated
3tentative
4duplicated
5delayed
6notReceived
 .1.3.6.1.4.1.259.10.1.14.89.26.1.1.14

rsIcmpRdTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.2.2 · 1 row entry · 8 columns
Open in standard view 
This table contains ICMP Router Discovery parameters
configurated per IP interface.
rsIcmpRdEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1
The ICMP parameters configurated for IP interface.
Indexes
rsIcmpRdIpAddr
Column Syntax OID
rsIcmpRdIpAddr
The IP address to which this entry's information pertains.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.1
rsIcmpRdIpAdvertAddr
The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.2
rsIcmpRdMaxAdvertInterval
The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.3
rsIcmpRdMinAdvertInterval
The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpR…
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.4
rsIcmpRdAdvertLifetime
The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.5
rsIcmpRdAdvertise
A flag indicating whether or not the address is to be
advertised.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.6
rsIcmpRdPreferenceLevel
The preferability of the address as a default router
address, relative to other router addresses on the same
subnet.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.7
rsIcmpRdEntStatus
Setting of any value to this object set values of
all fields to the default values.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.2.2.1.8

rsArpStaticTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.4.9 · 1 row entry · 3 columns
Open in standard view 
The table used for adding static ARP entries
without specifying Layer 2 interface.
rsArpStaticEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.4.9.1
Each entry contains one IpAddress to `physical' address equivalence.
Indexes
rsArpStaticIpAddress
Column Syntax OID
rsArpStaticIpAddress
The IpAddress corresponding to the media-dependent `physical' address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.4.9.1.1
rsArpStaticPhysAddress
The media-dependent `physical' address.
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.259.10.1.14.89.26.4.9.1.2
rsArpStaticRowStatus
Entry status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.26.4.9.1.3

rsArpInterfaceTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.4.10 · 1 row entry · 3 columns
Open in standard view 
L2 Interface specific configuration for ARP Application.
Entry in this table will be dynamically created,
when first IP Address is defined on specific L2 interface,
and destroyed when the last IP address on this L2 interface is removed
rsArpInterfaceEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.4.10.1
Each entry contains L2 Interface specific configuration
for ARP Application.
Indexes
rsArpInterfaceIfIndex
Column Syntax OID
rsArpInterfaceIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.4.10.1.1
rsArpInterfaceInactiveTimeOut
This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.
Default value 0 means using…
Unsigned32r/w
Constraints:
range: 0-40000000
 .1.3.6.1.4.1.259.10.1.14.89.26.4.10.1.2
rsArpInterfaceArpProxy
When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disable…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.259.10.1.14.89.26.4.10.1.3

rlTranslationNameToIpTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.12 · 1 row entry · 2 columns
Open in standard view 
This table translates IP interfaces's name to
IP interface's address
rlTranslationNameToIpEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.12.1
The row definition for this table.
Indexes
rlTranslationNameToIpName
Column Syntax OID
rlTranslationNameToIpName
The IP Interface name
OctetString
Constraints:
range: 1-30
 .1.3.6.1.4.1.259.10.1.14.89.26.12.1.1
rlTranslationNameToIpIpAddr
The IP Interface address
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.12.1.2

rlIpCidrRouteExtTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.16 · 1 row entry · 1 columns
Open in standard view 
Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only
rlIpCidrRouteExtEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.16.1
A row of the table ipCidrRouteTable Extended
by this definition.
Indexes
No indexes recorded
Column Syntax OID
rlIpCidrRouteProto
Added infor for ipCidrRouteTable.
extends the info of ipCidrRouteProto to show the route inner protocol.
Allowes the user to see which type of route in the protocol
e.g. ospf internal, ospf external.
Enumeration
Enumerated Values:
1local
2netmgmt
3rip
4ospfInternal
5ospfExternal
6ospfAggregateNetRange
7bgp4Internal
8bgp4External
9aggregateRoute
10other
 .1.3.6.1.4.1.259.10.1.14.89.26.16.1.1

rlIpStaticRouteTable

table
.1.3.6.1.4.1.259.10.1.14.89.26.17.1 · 1 row entry · 10 columns
Open in standard view 
This entity's    static (user configured) IP Routing table.
entries are MAX-ACCESSible even if not used for forwarding
rlIpStaticRouteEntry entry .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1
A particular Static(user configured) route to a particular destina-
tion, under a particular policy.
Indexes
rlIpStaticRouteDest rlIpStaticRouteMask rlIpStaticRouteTos rlIpStaticRouteNextHop
Column Syntax OID
rlIpStaticRouteDest
The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bi…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.1
rlIpStaticRouteMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the rlIpStaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent construc…
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.2
rlIpStaticRouteTos
See ipCidrRouteTos definition
For now only value 0 is valid
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.3
rlIpStaticRouteNextHop
On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.4
rlIpStaticRouteMetric
The routing metric for this route.
The semantics of this metric are determined by the user.
normal semantic will be next hop count or some administarative distance
to create routing policy.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.5
rlIpStaticRouteType
The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination this is the case when user overides the a local interface
entry to change it parameters;
remote(4) refers to a …
Enumerationr/w
Enumerated Values:
1reject
2local
3remote
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.6
rlIpStaticRouteNextHopAS
The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
ipCidrRouteProto value. When this object is
unknown or not relevant its va…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.7
rlIpStaticRouteForwardingStatus
active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is co…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.8
rlIpStaticRouteRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.9
rlIpStaticRouteOwner
Static - The route is configured over Static IP.
This route is written to configuration files.
Dhcp - The route is Configured by DHCP
(received as part of DHCP configuration)
This route IS NOT written to configuration…
Enumeration
Enumerated Values:
1static
2dhcp
3default
 .1.3.6.1.4.1.259.10.1.14.89.26.17.1.1.10