ECS4610-50T-MIB Table View

Table of descriptive and status information about
the switch units in this system.

Table about the status of individual powers.

The fan status table.

The table which collects switch temperature information.

The table for configuring the thermal action.

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

Table for cable diagnostics result.

Table for internal loopback test result.

Dispalys port utilization during recent 300 seconds.

Configures vlan trunking feature.

This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table.

This table lists the instrumented parameters of all
optical interfaces.

Table describing the configuration and status of each
trunk.

Table for LACP port configuration.

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

The instance table for the Multiple Spanning Tree region

The Multiple Spanning Tree region instance vlan mapped table.

A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

A table that contains the settings of RSPAN.

Table for current router ports.

Table for static router ports.

Table for static multicast addresses.

Table for configuring IGMP snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received.

Table for current multicast addresses.

The table for configuring the IGMP snooping profile.

The table for configuring the range of the IGMP snooping
profile.

Table for port configuration in IGMP filtering.

Table for port configuration in IGMP throttling.

Table of IGMP Snooping service per port.

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs).

The role of the DHCP relay agent is to forward requests
and replies between server and client when they are not
in the same subnet. To enable DHCP relay service the user needs to
specify relay server IP address and then restart DHCP relay.
This table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5.
To restart DHCP relay, please use the dhcpRelayRestart variable.

The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IP
address and then restart DHCP Relay. This Table is to specify Relay
Server IP address,the maximum numbers of server IP address user can
specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
variable.

A dhcp pool is a collection of
user configuration such as option config-lease time
 or dns-server IPs, a network address for network pool,
 or a host IP plus a hardware address pair for host pool.
 However, a dhcp pool only can either be a network pool
 or a host pool, or none of them (such as that pool only
 containing option config no network address config
 or a host ip config as well)

This is the Option table of the dhcpPoolTable,
user can specify Options configuration in this table

To specify the DNS IP servers available to a DHCP client,
you can specify up to two addresses for each DHCP pool.

Specifices the default router list for a DHCP Client,
you can specify up to two addresses for each DHCP pool.

To configure the NetBIOS WINS name servers that are available
to DHCP clients. You can specify up to eight addressed for each
DHCP pool.

To specify IP addresses that a DHCP Server
shuld not assign to DHCP clients.

To configure the address bindings on the DHCP server.

A DHCP pool is a collection of user configuration such as option
config-lease time or DNS-server IPs, a network address for network
pool, or a host IP plus a hardware address pair for host pool.
However, a DHCP pool only can either be a network pool or a host pool,
or none of them (such as that pool only containing option config no
network address config or a host IP config as well).

This is the Option table of the dhcpPoolTable, user can specify
options configuration in this table.

To specify the DNS IP servers available to a DHCP client, you can
specify up to two addresses for each DHCP pool.

Specifies the default router list for a DHCP Client, you can specify
up to two addresses for each DHCP pool.

To configure the NetBIOS WINS name servers that are available to DHCP
clients. You can specify up to eight addressed for each DHCP pool.