DS3-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
82
dsx3ConfigTable
table.1.3.6.1.2.1.10.30.5
·
1 row entry
·
18 columns
The DS3/E3 Configuration table.
An entry in the DS3/E3 Configuration table.
Indexes
dsx3LineIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx3LineIndex
This object should be made equal to ifIndex. The
next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable. Previously, this object was the identif… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.5.1.1 |
||||||||||||||||||
|
dsx3IfIndex
deprecated
This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II (RFC 1213). |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.5.1.2 |
||||||||||||||||||
|
dsx3TimeElapsed
The number of seconds that have elapsed since the
beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current int… |
Integer32 Constraints: range: 0-899 |
.1.3.6.1.2.1.10.30.5.1.3 |
||||||||||||||||||
|
dsx3ValidIntervals
The number of previous near end intervals for
which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 m… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.2.1.10.30.5.1.4 |
||||||||||||||||||
|
dsx3LineType
This variable indicates the variety of DS3 C-bit
or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.5 |
||||||||||||||||||
|
dsx3LineCoding
This variable describes the variety of Zero Code
Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and b… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.6 |
||||||||||||||||||
|
dsx3SendCode
This variable indicates what type of code is
being sent across the DS3/E3 interface by the device. (These are optional for E3 interfaces.) Setting this variable causes the interface to begin sending the code requested.… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.7 |
||||||||||||||||||
|
dsx3CircuitIdentifier
This variable contains the transmission vendor's
circuit identifier, for the purpose of facilitating troubleshooting. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.2.1.10.30.5.1.8 |
||||||||||||||||||
|
dsx3LoopbackConfig
This variable represents the desired loopback
configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.9 |
||||||||||||||||||
|
dsx3LineStatus
This variable indicates the Line Status of the
interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map represented as a sum, therefore, it can represent multipl… |
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.2.1.10.30.5.1.10 |
||||||||||||||||||
|
dsx3TransmitClockSource
The source of Transmit Clock.
loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an externa… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.11 |
||||||||||||||||||
|
dsx3InvalidIntervals
The number of intervals in the range from 0 to
dsx3ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy si… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.2.1.10.30.5.1.12 |
||||||||||||||||||
|
dsx3LineLength
The length of the ds3 line in meters. This
object provides information for line build out circuitry if it exists and can use this object to adjust the line build out. |
metersInteger32r/w Constraints: range: 0-64000 |
.1.3.6.1.2.1.10.30.5.1.13 |
||||||||||||||||||
|
dsx3LineStatusLastChange
The value of MIB II's sysUpTime object at the
time this DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.2.1.10.30.5.1.14 |
||||||||||||||||||
|
dsx3LineStatusChangeTrapEnable
Indicates whether dsx3LineStatusChange traps
should be generated for this interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.15 |
||||||||||||||||||
|
dsx3LoopbackStatus
This variable represents the current state of the
loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The dsx3LoopbackStatus is … |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.2.1.10.30.5.1.16 |
||||||||||||||||||
|
dsx3Channelization
Indicates whether this ds3/e3 is channelized or
unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabledDs3 indicated that this is a DS3 channelize… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.30.5.1.17 |
||||||||||||||||||
|
dsx3Ds1ForRemoteLoop
Indicates which DS1/E1 on this DS3/E3 will be
indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all DS1s/E1s will be looped. |
Integer32r/w Constraints: range: 0-29 |
.1.3.6.1.2.1.10.30.5.1.18 |
dsx3CurrentTable
table.1.3.6.1.2.1.10.30.6
·
1 row entry
·
11 columns
The DS3/E3 current table contains various statistics being collected for the current 15 minute interval.
An entry in the DS3/E3 Current table.
Indexes
dsx3CurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx3CurrentIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.6.1.1 |
|
dsx3CurrentPESs
The counter associated with the number of P-bit
Errored Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.2 |
|
dsx3CurrentPSESs
The counter associated with the number of P-bit
Severely Errored Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.3 |
|
dsx3CurrentSEFSs
The counter associated with the number of
Severely Errored Framing Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.4 |
|
dsx3CurrentUASs
The counter associated with the number of
Unavailable Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.5 |
|
dsx3CurrentLCVs
The counter associated with the number of Line
Coding Violations. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.6 |
|
dsx3CurrentPCVs
The counter associated with the number of P-bit
Coding Violations. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.7 |
|
dsx3CurrentLESs
The number of Line Errored Seconds.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.8 |
|
dsx3CurrentCCVs
The number of C-bit Coding Violations.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.9 |
|
dsx3CurrentCESs
The number of C-bit Errored Seconds.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.10 |
|
dsx3CurrentCSESs
The number of C-bit Severely Errored Seconds.
|
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.6.1.11 |
dsx3IntervalTable
table.1.3.6.1.2.1.10.30.7
·
1 row entry
·
13 columns
The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by dsx3IntervalNumber) and for one specific interface (identified by dsx3IntervalIndex).
An entry in the DS3/E3 Interval table.
Indexes
dsx3IntervalIndex dsx3IntervalNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx3IntervalIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.7.1.1 |
||||
|
dsx3IntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
Integer32 Constraints: range: 1-96 |
.1.3.6.1.2.1.10.30.7.1.2 |
||||
|
dsx3IntervalPESs
The counter associated with the number of P-bit
Errored Seconds. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.3 |
||||
|
dsx3IntervalPSESs
The counter associated with the number of P-bit
Severely Errored Seconds. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.4 |
||||
|
dsx3IntervalSEFSs
The counter associated with the number of
Severely Errored Framing Seconds. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.5 |
||||
|
dsx3IntervalUASs
The counter associated with the number of
Unavailable Seconds. This object may decrease if the occurrence of unavailable seconds occurs across an interval boundary. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.6 |
||||
|
dsx3IntervalLCVs
The counter associated with the number of Line
Coding Violations. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.7 |
||||
|
dsx3IntervalPCVs
The counter associated with the number of P-bit
Coding Violations. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.8 |
||||
|
dsx3IntervalLESs
The number of Line Errored Seconds (BPVs or
illegal zero sequences). |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.9 |
||||
|
dsx3IntervalCCVs
The number of C-bit Coding Violations.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.10 |
||||
|
dsx3IntervalCESs
The number of C-bit Errored Seconds.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.11 |
||||
|
dsx3IntervalCSESs
The number of C-bit Severely Errored Seconds.
|
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.7.1.12 |
||||
|
dsx3IntervalValidData
This variable indicates if the data for this
interval is valid. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.10.30.7.1.13 |
dsx3TotalTable
table.1.3.6.1.2.1.10.30.8
·
1 row entry
·
11 columns
The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
An entry in the DS3/E3 Total table.
Indexes
dsx3TotalIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx3TotalIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ds… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.8.1.1 |
|
dsx3TotalPESs
The counter associated with the number of P-bit
Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.2 |
|
dsx3TotalPSESs
The counter associated with the number of P-bit
Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.3 |
|
dsx3TotalSEFSs
The counter associated with the number of
Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.4 |
|
dsx3TotalUASs
The counter associated with the number of
Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.5 |
|
dsx3TotalLCVs
The counter associated with the number of Line
Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.6 |
|
dsx3TotalPCVs
The counter associated with the number of P-bit
Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.7 |
|
dsx3TotalLESs
The number of Line Errored Seconds (BPVs or
illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.8 |
|
dsx3TotalCCVs
The number of C-bit Coding Violations encountered
by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.9 |
|
dsx3TotalCESs
The number of C-bit Errored Seconds encountered
by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.10 |
|
dsx3TotalCSESs
The number of C-bit Severely Errored Seconds
encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.8.1.11 |
dsx3FarEndConfigTable
table.1.3.6.1.2.1.10.30.9
·
1 row entry
·
6 columns
The DS3 Far End Configuration Table contains configuration information reported in the C-bits from the remote end.
An entry in the DS3 Far End Configuration table.
Indexes
dsx3FarEndLineIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx3FarEndLineIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.9.1.1 |
|
dsx3FarEndEquipCode
This is the Far End Equipment Identification code
that describes the specific piece of equipment. It is sent within the Path Identification Message. |
OctetStringr/w Constraints: range: 0-10 |
.1.3.6.1.2.1.10.30.9.1.2 |
|
dsx3FarEndLocationIDCode
This is the Far End Location Identification code
that describes the specific location of the equipment. It is sent within the Path Identification Message. |
OctetStringr/w Constraints: range: 0-11 |
.1.3.6.1.2.1.10.30.9.1.3 |
|
dsx3FarEndFrameIDCode
This is the Far End Frame Identification code
that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message. |
OctetStringr/w Constraints: range: 0-10 |
.1.3.6.1.2.1.10.30.9.1.4 |
|
dsx3FarEndUnitCode
This is the Far End code that identifies the
equipment location within a bay. It is sent within the Path Identification Message. |
OctetStringr/w Constraints: range: 0-6 |
.1.3.6.1.2.1.10.30.9.1.5 |
|
dsx3FarEndFacilityIDCode
This code identifies a specific Far End DS3 path.
It is sent within the Path Identification Message. |
OctetStringr/w Constraints: range: 0-38 |
.1.3.6.1.2.1.10.30.9.1.6 |
dsx3FarEndCurrentTable
table.1.3.6.1.2.1.10.30.10
·
1 row entry
·
8 columns
The DS3 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end block error code within the C- bits.
An entry in the DS3 Far End Current table.
Indexes
dsx3FarEndCurrentIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx3FarEndCurrentIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of … |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.10.1.1 |
|
dsx3FarEndTimeElapsed
The number of seconds that have elapsed since the
beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the… |
Integer32 Constraints: range: 0-899 |
.1.3.6.1.2.1.10.30.10.1.2 |
|
dsx3FarEndValidIntervals
The number of previous far end intervals for
which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 mi… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.2.1.10.30.10.1.3 |
|
dsx3FarEndCurrentCESs
The counter associated with the number of Far End
C-bit Errored Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.10.1.4 |
|
dsx3FarEndCurrentCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.10.1.5 |
|
dsx3FarEndCurrentCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end block error count. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.10.1.6 |
|
dsx3FarEndCurrentUASs
The counter associated with the number of Far End
unavailable seconds. |
PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32 |
.1.3.6.1.2.1.10.30.10.1.7 |
|
dsx3FarEndInvalidIntervals
The number of intervals in the range from 0 to
dsx3FarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in p… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.2.1.10.30.10.1.8 |
dsx3FarEndIntervalTable
table.1.3.6.1.2.1.10.30.11
·
1 row entry
·
7 columns
The DS3 Far End Interval Table contains various
statistics collected by each DS3 interface over
the previous 24 hours of operation. The past 24
hours are broken into 96 completed 15 minute
intervals.
An entry in the DS3 Far End Interval table.
Indexes
dsx3FarEndIntervalIndex dsx3FarEndIntervalNumber
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx3FarEndIntervalIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of … |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.11.1.1 |
||||
|
dsx3FarEndIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. |
Integer32 Constraints: range: 1-96 |
.1.3.6.1.2.1.10.30.11.1.2 |
||||
|
dsx3FarEndIntervalCESs
The counter associated with the number of Far End
C-bit Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. In the case where the agent is a proxy and data is not a… |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.11.1.3 |
||||
|
dsx3FarEndIntervalCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.11.1.4 |
||||
|
dsx3FarEndIntervalCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end block error count. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.11.1.5 |
||||
|
dsx3FarEndIntervalUASs
The counter associated with the number of Far End
unavailable seconds. |
PerfHist-TC-MIBPerfIntervalCount Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32 |
.1.3.6.1.2.1.10.30.11.1.6 |
||||
|
dsx3FarEndIntervalValidData
This variable indicates if the data for this
interval is valid. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.2.1.10.30.11.1.7 |
dsx3FarEndTotalTable
table.1.3.6.1.2.1.10.30.12
·
1 row entry
·
5 columns
The DS3 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
An entry in the DS3 Far End Total table.
Indexes
dsx3FarEndTotalIndex
| Column | Syntax | OID |
|---|---|---|
|
dsx3FarEndTotalIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of … |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.2.1.10.30.12.1.1 |
|
dsx3FarEndTotalCESs
The counter associated with the number of Far End
C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.12.1.2 |
|
dsx3FarEndTotalCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.12.1.3 |
|
dsx3FarEndTotalCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as … |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.12.1.4 |
|
dsx3FarEndTotalUASs
The counter associated with the number of Far End
unavailable seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. |
PerfHist-TC-MIBPerfTotalCount Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32 |
.1.3.6.1.2.1.10.30.12.1.5 |
.1.3.6.1.2.1.10.30.13
·
1 row entry
·
3 columns
This table is deprecated in favour of using
ifStackTable.
Implementation of this table was optional. It was
designed for those systems dividing a DS3/E3 into
channels containing different data streams that
are of local interest.
The DS3/E3 fractional table identifies which
DS3/E3 channels associated with a CSU are being
used to support a logical interface, i.e., an
entry in the interfaces table from the Internet-
standard MIB.
For example, consider a DS3 device with 4 high
speed links carrying router traffic, a feed for
voice, a feed for video, and a synchronous channel
for a non-routed protocol. We might describe the
allocation of channels, in the dsx3FracTable, as
follows:
dsx3FracIfIndex.2. 1 = 3 dsx3FracIfIndex.2.15 = 4
dsx3FracIfIndex.2. 2 = 3 dsx3FracIfIndex.2.16 = 6
dsx3FracIfIndex.2. 3 = 3 dsx3FracIfIndex.2.17 = 6
dsx3FracIfIndex.2. 4 = 3 dsx3FracIfIndex.2.18 = 6
dsx3FracIfIndex.2. 5 = 3 dsx3FracIfIndex.2.19 = 6
dsx3FracIfIndex.2. 6 = 3 dsx3FracIfIndex.2.20 = 6
dsx3FracIfIndex.2. 7 = 4 dsx3FracIfIndex.2.21 = 6
dsx3FracIfIndex.2. 8 = 4 dsx3FracIfIndex.2.22 = 6
dsx3FracIfIndex.2. 9 = 4 dsx3FracIfIndex.2.23 = 6
dsx3FracIfIndex.2.10 = 4 dsx3FracIfIndex.2.24 = 6
dsx3FracIfIndex.2.11 = 4 dsx3FracIfIndex.2.25 = 6
dsx3FracIfIndex.2.12 = 5 dsx3FracIfIndex.2.26 = 6
dsx3FracIfIndex.2.13 = 5 dsx3FracIfIndex.2.27 = 6
dsx3FracIfIndex.2.14 = 5 dsx3FracIfIndex.2.28 = 6
For dsx3M23, dsx3 SYNTRAN, dsx3CbitParity, and
dsx3ClearChannel there are 28 legal channels,
numbered 1 through 28.
For e3Framed there are 16 legal channels, numbered
1 through 16. The channels (1..16) correspond
directly to the equivalently numbered time-slots.
An entry in the DS3 Fractional table.
Indexes
dsx3FracIndex dsx3FracNumber
| Column | Syntax | OID |
|---|---|---|
|
dsx3FracIndex
deprecated
The index value which uniquely identifies the
DS3 interface to which this entry is applicable The interface identified by a particular value of this index is the same interface as identified by the same value an … |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.2.1.10.30.13.1.1 |
|
dsx3FracNumber
deprecated
The channel number for this entry.
|
Integer32 Constraints: range: 1-31 |
.1.3.6.1.2.1.10.30.13.1.2 |
|
dsx3FracIfIndex
deprecated
An index value that uniquely identifies an
interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance. If no… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.2.1.10.30.13.1.3 |