DNOS-POWER-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

agentPethPsePortTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1 · 1 row entry · 10 columns
Open in standard view 
A table of per-port information and configuration objects relating 
to the power status of each port.
agentPethPsePortEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1
A collection of objects providing additional power information
and control parameters for the specified port.
Indexes
No indexes recorded
Column Syntax OID
agentPethPowerLimit
The configured maximum power this port can provide to an
attached device measured in Milliwatts.
MilliwattsSNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.1
agentPethOutputPower
The power this port is supplying to an attached device measured
in Milliwatts.
MilliwattsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.2
agentPethOutputCurrent
The current this port is supplying to an attached device measured
in Milliamps.
MilliampsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.3
agentPethOutputVolts
The voltage this port is supplying to an attached device measured
in Volts.
VoltsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.4
agentPethTemperature
The temperature measured at this port of the PoE Controller. It is
measured in degree celcius.
DEGREESSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.5
agentPethPowerLimitType
Describes or controls the maximum power that a port can deliver
A value of dot3af(1) means that the port power limit is as per
the dot3af class of the PD attached.
A value of user(2) means that the port power limit is e…
Enumerationr/w
Enumerated Values:
1dot3af
2user
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.6
agentPethHighPowerEnable
true (1) The PSE port can deliver power up to 32Watts.
false(2) The PSE port can deliver power up to 18Watts
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.7
agentPethPowerDetectionType
Describes PD detection mechanism performed by the PSE port.
A value of none(0) means no detection is done.
A value of legacy(1) means only legacy capacitive detection scheme is
used.
A value of 4ptdot3afonly(2) means th…
Enumerationr/w
Enumerated Values:
0none
1legacy
2fourPtdot3afonly
3fourPtdot3afandlegacy
4twoPtdot3afonly
5twoPtdot3afandlegacy
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.8
agentPethFaultStatus
Describes the error description when the pse port is in fault status.
A value of none(0) specifies that the pse port is not in any error state.
A value of mpsAbsent(1) specifies that the pse port has detected and absenc…
Enumeration
Enumerated Values:
0none
1mpsAbsent
2short
3overload
4powerDenied
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.9
agentPethPortReset
A value of reset(1) is used to move the pse port dot3af state to idle. A
read on this object will always return the value none(0). The value none(0)
can not be forcibly set by the administrtor.
Enumerationr/w
Enumerated Values:
0none
1reset
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.10

agentPethMainPseTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1 · 1 row entry · 1 columns
Open in standard view 
A table of objects that display and control attributes
of the main power source in a PSE  device. Ethernet
switches are one example of boxes that would support
these objects.
Values of all read-write objects in this table are
persistent at restart/reboot.
agentPethMainPseEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1
A set of objects that display and control the Main
power of a PSE.
Indexes
No indexes recorded
Column Syntax OID
agentPethMainPseLegacy
Enable/Disable Legacy device detection. The
value true(1) means legacy devices are detected; the
value false(2) means legacy devices are not detected.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1.1

agentPethPseTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3 · 1 row entry · 2 columns
Open in standard view 
A table of per-unit information and configuration objects relating 
to the power configurtion for the entire pse unit.
agentPethPseEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1
A collection of objects providing additional power information
and control parameters for the specified pse unit.
Indexes
No indexes recorded
Column Syntax OID
agentPethPsePowerManagementMode
Describes or controls the power management algorithm used by the pse
to deliver power to the requesting PDsthat a pds.
A value of dot3af(1) means that the port power limit is as per
the dot3af class of the PD attached.…
Enumerationr/w
Enumerated Values:
0none
1dynamic
2static
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.1
agentPethPseAutoResetEnable
true (1) The PSE port is reset with out administrator intervention whenver a
fault condition occurs.
false(2) Administrator has to reset the pse port whenver a fault condition
is detected.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.2