DLINKSW-IP-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
30

dRouteMapTable

table
.1.3.6.1.4.1.171.12.117.1.1 · 1 row entry · 2 columns
Open in standard view 
This table contains route-map name.
dRouteMapEntry entry .1.3.6.1.4.1.171.12.117.1.1.1
Each entry is a specific name of a route map.
Indexes
dRouteMapName
Column Syntax OID
dRouteMapName
The name of the route map.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.12.117.1.1.1.1
dRouteMapRowStatus
This object indicates the status of the route-map.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.1.1.99

dRouteMapSeqTable

table
.1.3.6.1.4.1.171.12.117.1.2 · 1 row entry · 3 columns
Open in standard view 
This table contains entries for route maps instances.
dRouteMapSeqEntry entry .1.3.6.1.4.1.171.12.117.1.2.1
Each entry is a specific sequence of a route map.
Indexes
dRouteMapName dRouteMapSeqNum
Column Syntax OID
dRouteMapSeqNum
Multiple entries of the same route map can be created by assigning a
different sequence number to it. Each instance is identified by the
route map name and the sequence number. The value of the sequence
number associa…
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.117.1.2.1.1
dRouteMapSeqMatchAction
Indicates the action performed by this route map instance.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.12.117.1.2.1.2
dRouteMapSeqRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention. The writable columns in a row cannot
be changed if the row is active. In other words, once created,
dRouteMapMatchAction…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.2.1.99

dRouteMapClauseTable

table
.1.3.6.1.4.1.171.12.117.1.3 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for instances of the route map clause
elements.
dRouteMapClauseEntry entry .1.3.6.1.4.1.171.12.117.1.3.1
Each entry describes the characteristics of one route map clause
element instance.
Indexes
dRouteMapName dRouteMapSeqNum dRouteMapClauseTypeId dRouteMapClauseSubId
Column Syntax OID
dRouteMapClauseTypeId
The type of match or set command in this entry.
A route map entry can contain multiple match and set statements.
To match a route against a route map entry, all of the match
clause elements in a route map sequence must …
Enumeration
Enumerated Values:
1matchIpAccessList
2matchIpPrefixList
3matchIpv6AccessList
4matchAsPath
5matchCommunity
7macthIpNexthop
8matchIpNexthopPrefixList
9matchMetric
10matchInterface
11matchRouteType
12matchIpRouteSource
13matchIpv6Nexthop
14matchIpv6NexthopPrefixList
15matchIpv6PrefixList
129setIpNexthop
131setIpv6Nexthop
136setAsPath
137setCommunity
139setMetric
140setLocalPreference
141setOrigin
142setWeight
143setDampening
144setMetricType
 .1.3.6.1.4.1.171.12.117.1.3.1.1
dRouteMapClauseSubId
Indicates the clause element sub ID. Because for some clause
types (e.g. setIpNexthop), multiple instances can be created,
this object is used solely to distinguish specific instance
of the element. If the created inst…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.12.117.1.3.1.2
dRouteMapClauseAddOption
This indicates the additional option selected along
with the main option (dRouteMapClauseTypeId) whenever it applies.
For more information on how to map this object value to each value,
refer to the route-map clauses ta…
Enumerationr/w
Enumerated Values:
0notApplicable
1exact
2additive
3communityNone
 .1.3.6.1.4.1.171.12.117.1.3.1.3
dRouteMapClauseElementValue
This represents match and set clauses' variable element
instance values in character string form. Whatever may be the data
type of the attribute element instance value, it is always interpreted
as a set of characters f…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.12.117.1.3.1.4
dRouteMapClauseRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention. The writable columns in a row cannot
be changed if the row is active. In other words, the table entry
elements may not…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.3.1.99

dAccessListTable

table
.1.3.6.1.4.1.171.12.117.1.4 · 1 row entry · 3 columns
Open in standard view 
This table contains name for IP access list.
dAccessListEntry entry .1.3.6.1.4.1.171.12.117.1.4.1
An entry contains the information of IP access list.
Indexes
dAccessListName dAccessListAddrType
Column Syntax OID
dAccessListName
The name of the IP access list.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.12.117.1.4.1.1
dAccessListAddrType
This object indicates the address type of the access list.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.171.12.117.1.4.1.2
dAccessListRowStatus
This object indicates the status of this entry.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.4.1.99

dAccessListRuleTable

table
.1.3.6.1.4.1.171.12.117.1.5 · 1 row entry · 4 columns
Open in standard view 
This table contains rules for IP access list.
dAccessListRuleEntry entry .1.3.6.1.4.1.171.12.117.1.5.1
An entry contains one rule of the IP access list.
Indexes
dAccessListName dAccessListAddrType dAccessListRuleMatchAction dAccessListRuleNetAddr dAccessListRulePfxLen
Column Syntax OID
dAccessListRuleMatchAction
Indicates the action performed for this IP access list.
Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.12.117.1.5.1.1
dAccessListRuleNetAddr
Indicates the network address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.12.117.1.5.1.2
dAccessListRulePfxLen
Indicates the prefix length of the network address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.117.1.5.1.3
dAccessListRuleRowStatus
This object indicates the status of this entry.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.5.1.99

dPrefixListTable

table
.1.3.6.1.4.1.171.12.117.1.6 · 1 row entry · 3 columns
Open in standard view 
This table contains name for IP prefix list.
dPrefixListEntry entry .1.3.6.1.4.1.171.12.117.1.6.1
An entry contains the information of IP prefix list.
Indexes
dPrefixListName dPrefixListAddrType
Column Syntax OID
dPrefixListName
The name of the IP prefix list.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.12.117.1.6.1.1
dPrefixListAddrType
This object indicates the address type of the prefix.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.171.12.117.1.6.1.2
dPrefixListRowStatus
This object indicates the status of this entry.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.6.1.99

dPrefixListRuleTable

table
.1.3.6.1.4.1.171.12.117.1.7 · 1 row entry · 8 columns
Open in standard view 
A table consists of a list of IP prefixes. 
The initial 2 index elements identify the prefix list that a prefix
belongs to.
dPrefixListRuleEntry entry .1.3.6.1.4.1.171.12.117.1.7.1
An entry contains the information of an IP prefix.
Indexes
dPrefixListName dPrefixListAddrType dPrefixListRuleSeqNum
Column Syntax OID
dPrefixListRuleSeqNum
The checking sequence of the prefix within a prefix list.
The lower the number is, the higher the precedence of the permit/deny rule.
The special value of 0 means the sequence number will be automatically
d…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.117.1.7.1.1
dPrefixListRuleAction
This object indicates whether to permit or deny the matched route entry.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.12.117.1.7.1.2
dPrefixListRuleNetAddr
This object indicates the network address (prefix).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.12.117.1.7.1.3
dPrefixListRulePrefixLen
The length of network address (prefix).
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.171.12.117.1.7.1.4
dPrefixListRuleGeValue
The minimum prefix length of the route that can be matched.
The special value of 0 indicates this object is not specified.
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.12.117.1.7.1.5
dPrefixListRuleLeValue
The maximum prefix length of the route that can be matched.
The special value of 0 indicates this object is not specified.
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.12.117.1.7.1.6
dPrefixListRuleHitCount
Counter that the prefix list entry has been matched.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.12.117.1.7.1.7
dPrefixListRuleRowStatus
This object indicates the status of this entry.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.7.1.99

dPrefixListDescTable

table
.1.3.6.1.4.1.171.12.117.1.8 · 1 row entry · 2 columns
Open in standard view 
A table consists of a list of descriptions for IP prefix lists.
dPrefixListDescEntry entry .1.3.6.1.4.1.171.12.117.1.8.1
An entry contains the description of an IP prefix list.
Indexes
dPrefixListName dPrefixListAddrType
Column Syntax OID
dPrefixListDescContent
Specify the description for prefix list.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.12.117.1.8.1.1
dPrefixListDescRowStatus
This object indicates the status of this entry.
Only createAndGo(4) and destroy(6) are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.117.1.8.1.99