DGS3426P-L3MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
79

swL3IpCtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.1.3 · 1 row entry · 22 columns
Open in standard view 
This table contain IP interface information.
swL3IpCtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1
A list of information about a specific IP interface.
Indexes
swL3IpCtrlInterfaceName
Column Syntax OID
swL3IpCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.1
swL3IpCtrlIfIndex
This object uniquely identifies the IP interface number in the
swL3IpCtrlTable.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.2
swL3IpCtrlIpAddr
The IP address of the interface. This object only can take the
value of the unicast IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.3
swL3IpCtrlIpSubnetMask
The IP net mask for this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.4
swL3IpCtrlVlanName
This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.5
swL3IpCtrlProxyArp
This object indicates enable/disable of the proxy ARP function for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.6
swL3IpCtrlSecondary
When this is true(1), the IP address is the secondary IP. When
false(2), the IP address is the primary IP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.7
swL3IpCtrlMode
This object indicates the IP operation mode.

other(1) - This entry is currently in use but the conditions under
which it will remain are determined by each of the following values.
bootp(3) - The I…
Enumerationr/w
Enumerated Values:
1other
3bootp
4dhcp
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.8
swL3IpCtrlAdminState
The state of the IP interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.9
swL3IpCtrlIpv6LinkLocalAddress
The IPv6 link local address for this interface.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.14
swL3IpCtrlIpv6LinkLocalPrefixLen
The IPv6 prefix length for this IPv6 link local address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.15
swL3IpCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.16
swL3IpCtrlIpv6LinkLocalAutoState
The state of the IPv6 link local auto.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.17
swL3IpCtrlLocalProxyArp
If the state is enabled, the switch will be allowed to respond to the proxy ARP
proxy ARP when the source IP and destination IP are on the same interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.18
swL3IpCtrlDhcpv6ClientState
The state of the Dhcpv6 Client.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.20
swL3IpCtrlIpDirectedBroadcastState
The state of the IP Directed Broadcast.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.21
swL3IpCtrlIpDhcpOption12State
Enable or disable insertion of option 12 in the DHCPDISCOVER and
DHCPREQUEST message.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.22
swL3IpCtrlIpDhcpOption12HostName
Specify the host name to be inserted in the DHCPDISCOVER and
DHCPREQUEST message. The specified host name must start with a
letter, end with a letter or digit, and have only letters, digits,
and hyphen as interior ch…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.23
swL3IpCtrlDhcpv6ClientPDState
The state of the Dhcpv6 Client PD.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.24
swL3IpCtrlDhcpv6ClientPDPrefixName
This object indicates the name for the DHCPv6 Client PD. If the
swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.25
swL3IpCtrlDhcpv6ClientPDPrefix
The IPv6 prefix obtained form delegation router.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.26
swL3IpCtrlDhcpv6ClientPDPrefixLen
The IPv6 prefix length for the prefix obtained from delegation router.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.27

swL3Ipv6CtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.1.4 · 1 row entry · 12 columns
Open in standard view 
This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1
A list of IPv6 information about a specific IP interface.
Indexes
swL3Ipv6CtrlInterfaceName
Column Syntax OID
swL3Ipv6CtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.1
swL3Ipv6CtrlMaxReassmblySize
Maximum Reassembly Size of the IP interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.2
swL3Ipv6CtrlNsRetransTimer
Neighbor solicitation's retransmit timer.
The unit is set in milliseconds.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.3
swL3Ipv6CtrlRaState
Neighbor solicited state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.5
swL3Ipv6CtrlRaMinRtrAdvInterval
The minimum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInt…
Integer32r/w
Constraints:
range: 3-1350
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.6
swL3Ipv6CtrlRaMaxRtrAdvInterval
The maximum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.7
swL3Ipv6CtrlRaLifeTime
Indicates the lifetime of the router as the default router.
Integer32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.8
swL3Ipv6CtrlRaReachableTime
Indicates the amount of time that a node can consider a neighboring
node reachable after receiving a reachability confirmation.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.9
swL3Ipv6CtrlRaRetransTime
Indicates the amount of time between retransmissions of neighbor
solicited messages.
The unit is set in millisecond.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.10
swL3Ipv6CtrlRaHopLimit
Indicates the default value of the hop limit field in the IPv6 header for
packets sent by hosts that receive this RA message.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.11
swL3Ipv6CtrlRaManagedFlag
When enabled, it indicates that hosts receiving this RA must use a
stateful address configuration protocol to obtain an address in the addition
to the addresses derived from the stateless address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.12
swL3Ipv6CtrlRaOtherConfigFlag
When enabled, it indicates that hosts receiving this RA must use a stateful
address configuration protocol to obtain an on-link address configuration information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.13

swL3Ipv6AddressCtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.1.5 · 1 row entry · 9 columns
Open in standard view 
This table contain IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1
A list of information about a specific IPv6 address.
Indexes
swL3Ipv6AddressCtrlInterfaceName swL3Ipv6Address swL3Ipv6AddressCtrlPrefixLen
Column Syntax OID
swL3Ipv6AddressCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.1
swL3Ipv6Address
Specify the IPv6 address.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.2
swL3Ipv6AddressCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.3
swL3Ipv6AddressCtrlPreferredLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains in preferred state.
For an infinite valid lifetime, the value can be set to 0xfffffff…
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.4
swL3Ipv6AddressCtrlValidLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains valid.
For an infinite valid lifetime, the value can be set to 0xffffffff.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.5
swL3Ipv6AddressCtrlOnLinkFlag
When enabled, the address implied by the specified prefix is available
on the link where the RA message is received.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.6
swL3Ipv6AddressCtrlAutonomousFlag
When enabled, the specified prefix will be used to create an autonomous address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.7
swL3Ipv6AddressCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.8
swL3Ipv6AddressCtrlAddressType
This object indicates the type of the IPv6 address.

manual(1): the IPv6 address is configured by user.
dhcpv6(2): the IPv6 address is assigned by DHCPv6 server.
stateless(3): the IPv6 address is assigned …
Enumeration
Enumerated Values:
1manual
2dhcpv6
3stateless
 .1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.9

swL3Ipv6DHCPv6CPDAddrCtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.1.6 · 1 row entry · 5 columns
Open in standard view 
This table contain the information of the IPv6 address which based on DHCPv6 client PD.
swL3Ipv6DHCPv6CPDAddrCtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1
A list of information about a specific DHCPv6 Client PD IPv6 address.
Indexes
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName swL3Ipv6DHCPv6CPDAddrCtrlPrefixName swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen
Column Syntax OID
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.1
swL3Ipv6DHCPv6CPDAddrCtrlPrefixName
This object indicates the name of the prefix based on
which the IPv6 address will be generate.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.2
swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr
Specify the suffix of the IPv6 address.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.3
swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.4
swL3Ipv6DHCPv6CPDAddrCtrlState
This variable displays the status of the entry. The status is used
for creating and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.5

swL3IpFdbInfoTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.2.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets.
swL3IpFdbInfoEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.2.1.1
Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.
Indexes
swL3IpFdbInfoIpAddr
Column Syntax OID
swL3IpFdbInfoIpAddr
A IP address for which switch has forwarding and/or filtering
information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask
A IP net mask for this interface.for which switch has
forwarding and/or filtering information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.2
swL3IpFdbInfoPort
Either the value '0', or the port number of the port on which
packet having a IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port nu…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.3
swL3IpFdbInfoType
The status of this entry.
Enumeration
Enumerated Values:
1other
2static
3dynamic
 .1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.4

swL3IpStaticRouteTable

table
.1.3.6.1.4.1.171.11.70.7.3.2.5 · 1 row entry · 6 columns
Open in standard view 
This entity's IP static Routing table.
swL3IpStaticRouteEntry entry .1.3.6.1.4.1.171.11.70.7.3.2.5.1
A particular route to a particular destination, under a particular policy.
Once an entry be built,it shouldn't be modified.That is,it just support create and
delete action.
Indexes
swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteNextHop
Column Syntax OID
swL3IpStaticRouteDest
The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a valu…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.1
swL3IpStaticRouteMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.2
swL3IpStaticRouteBkupState
The routing state for this route.The value SHOULD be
primary(1) or backup(2).
Enumeration
Enumerated Values:
1primary
2backup
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.3
swL3IpStaticRouteNextHop
On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.4
swL3IpStaticRouteMetric
The routing metric for this route.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.5
swL3IpStaticRouteStatus
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
4active
5inActive
 .1.3.6.1.4.1.171.11.70.7.3.2.5.1.6

swL3RelayDhcpCtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.3.1.4 · 1 row entry · 3 columns
Open in standard view 
This table specifys the IP address as a destination to forward
(relay) DHCP packets to.
swL3RelayDhcpCtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.3.1.4.1
A list of information specifies the IP address as a destination
to forward (relay) DHCP packets to.
Indexes
swL3RelayDhcpCtrlInterfaceName swL3RelayDhcpCtrlServer
Column Syntax OID
swL3RelayDhcpCtrlInterfaceName
The name of the IP interface.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.1
swL3RelayDhcpCtrlServer
The DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.2
swL3RelayDhcpCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.3

swL3DHCPRelayOption60DefTable

table
.1.3.6.1.4.1.171.11.70.7.3.3.1.8.3 · 1 row entry · 2 columns
Open in standard view 
This table indicates the default relay servers for the packet
that has no option 60 mathcing rules.
swL3DHCPRelayOption60DefEntry entry .1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1
A list of information indicates the default relay servers for the packet
that has no option 60 mathcing rules.
Indexes
swL3DHCPRelayOption60DefRelayIp
Column Syntax OID
swL3DHCPRelayOption60DefRelayIp
This object indicates the IP address of default relay server.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1.1
swL3DHCPRelayOption60DefRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1.2

swL3DHCPRelayOption60Table

table
.1.3.6.1.4.1.171.11.70.7.3.3.1.8.4 · 1 row entry · 4 columns
Open in standard view 
This table indicates the relay servers for the packet at option 60 rules.
swL3DHCPRelayOption60Entry entry .1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1
A list of information indicates the relay servers for the packet
at option 60 rules.
Indexes
swL3DHCPRelayOption60String swL3DHCPRelayOption60RelayIp
Column Syntax OID
swL3DHCPRelayOption60String
This object indicates string of this entry.

Note that it is theoretically possible for a valid string
to exceed the allowed length of an SNMP object identifier,
and thus be impossible to rep…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.1
swL3DHCPRelayOption60RelayIp
This object indicates the IP address of relay server.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.2
swL3DHCPRelayOption60MatchType
This object indicates match state of this entry.

exact(1): means the option 60 string in the packet must full
match with the specified string.
partial(2): means the option 60 string in the packet only ne…
Enumerationr/w
Enumerated Values:
1exact
2partial
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.3
swL3DHCPRelayOption60RowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.4

swL3DHCPRelayOption61Table

table
.1.3.6.1.4.1.171.11.70.7.3.3.1.9.4 · 1 row entry · 5 columns
Open in standard view 
This table indicates the relay servers for the packet at option 61 rules.
swL3DHCPRelayOption61Entry entry .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1
A list of information indicates the relay servers for the packet
at option 61 rules.
Indexes
swL3DHCPRelayOption61ClientType swL3DHCPRelayOption61ClientID
Column Syntax OID
swL3DHCPRelayOption61ClientType
This object indicates client type of this entry.

mac(1): means the client-ID which is the MAC address of client.
string(2): means the client-ID which is specified string by administrator.
Enumeration
Enumerated Values:
1mac
2string
 .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.1
swL3DHCPRelayOption61ClientID
This object indicates string of this entry.

When swL3DHCPRelayOption61ClientType is mac(1), the format of this
object should be XX-XX-XX-XX-XX-XX (MAC address).

Note that it is theoreticall…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.2
swL3DHCPRelayOption61Mode
This object indicates mode of this entry.

relay(1): means to relay the packet to the IP address which is specified
by swL3DHCPRelayOption61RelayIp.
drop(2): means to drop the packet.
Enumerationr/w
Enumerated Values:
1relay
2drop
 .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.3
swL3DHCPRelayOption61RelayIp
This object indicates the IP address of relay server.

Pay attention to when swL3DHCPRelayOption61Mode is:
relay(1): this object must be set together.
drop(2): this object can not be set, and it always ret…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.4
swL3DHCPRelayOption61RowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.5

swL3RelayDnsCtrlTable

table
.1.3.6.1.4.1.171.11.70.7.3.3.2.6 · 1 row entry · 3 columns
Open in standard view 
This table display the current DNS relay static table.
swL3RelayDnsCtrlEntry entry .1.3.6.1.4.1.171.11.70.7.3.3.2.6.1
A list of information display the current DNS relay static
table.
Indexes
swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr
Column Syntax OID
swL3RelayDnsCtrlDomainName
The domain name of the entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr
The IP address of the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.2
swL3RelayDnsCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values. …
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.3

swL3RouteRedistriTable

table
.1.3.6.1.4.1.171.11.70.7.3.5 · 1 row entry · 4 columns
Open in standard view 
Route redistribution allows routers on the network that are 
running different routing protocols to exchange routing 
information. This is accomplished by comparing the routes stored
in the varios routers' routing tables and assigning appropriate
metrics. This information is then exchanged among the various 
routers according to the individual routers current routing 
protocol.
swL3RouteRedistriEntry entry .1.3.6.1.4.1.171.11.70.7.3.5.1
A list of information displaying the route redistribution table.
Indexes
swL3RouteRedistriSrcProtocol swL3RouteRedistriDstProtocol
Column Syntax OID
swL3RouteRedistriSrcProtocol
Allows the selection of the protocol of the source device.
Enumeration
Enumerated Values:
1other
4static
5local
 .1.3.6.1.4.1.171.11.70.7.3.5.1.1
swL3RouteRedistriDstProtocol
Allows the selection of the protocol of the destination device.
Enumeration
Enumerated Values:
1other
2rip
 .1.3.6.1.4.1.171.11.70.7.3.5.1.2
swL3RouteRedistriMetric
Allows the entry of an OSPF interface cost. This is analogous
to a Hop Count in the RIP routing protocol. The value '0'
indicates default value.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.171.11.70.7.3.5.1.4
swL3RouteRedistriRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.70.7.3.5.1.5