DGS3000-28SC-L3MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
78

swL3IpCtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.1.3 · 1 row entry · 29 columns
Open in standard view 
This table contains IP interface information.
swL3IpCtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1
A list of information about a specific IP interface.
Indexes
swL3IpCtrlInterfaceName
Column Syntax OID
swL3IpCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.1
swL3IpCtrlIfIndex
This object uniquely identifies the IP interface number in the
swL3IpCtrlTable.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.2
swL3IpCtrlIpAddr
The IP address of the interface. This object only can take the
value of the unicast IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.3
swL3IpCtrlIpSubnetMask
The IP net mask for this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.4
swL3IpCtrlVlanName
This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.5
swL3IpCtrlProxyArp
This object indicates enable/disable of the proxy ARP function for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.6
swL3IpCtrlSecondary
When this is true(1), the IP address is the secondary IP. When
false(2), the IP address is the primary IP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.7
swL3IpCtrlMode
This object indicates the IP operation mode.

other(1) - This entry is currently in use but the conditions under
which it will remain are determined by each of the following values.
bootp(3) - The I…
Enumerationr/w
Enumerated Values:
1other
3bootp
4dhcp
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.8
swL3IpCtrlAdminState
The state of the IP interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.9
swL3IpCtrlIpv4AdminState
The IPv4 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.10
swL3IpCtrlIpv6AdminState
The IPv6 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.12
swL3IpCtrlIpv6LinkLocalAddress
The IPv6 link local address for this interface.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.14
swL3IpCtrlIpv6LinkLocalPrefixLen
The IPv6 prefix length for this IPv6 link local address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.15
swL3IpCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.16
swL3IpCtrlIpv6LinkLocalAutoState
The state of the IPv6 link local auto.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.17
swL3IpCtrlLocalProxyArp
This object indicates enable/disable of the local proxy ARP function for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.18
swL3IpCtrlIpMtu
The MTU is the largest size of the IP datagram which may be transferred
using a specific data link connection. The MTU value is a design parameter
of a LAN and is a mutually agreed value (i.e. both ends of a link agree …
bytesSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.19
swL3IpCtrlDhcpv6ClientState
The object indicates the state of the DHCPv6 client.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.20
swL3IpCtrlIpDirectedBroadcastState
The object indicates the state of the IP Directed Broadcast.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.21
swL3IpCtrlIpDhcpOption12State
Enable or disable insertion of option 12 in the DHCPDISCOVER and
DHCPREQUEST message.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.22
swL3IpCtrlIpDhcpOption12HostName
Specify the host name to be inserted in the DHCPDISCOVER and
DHCPREQUEST message. The specified host name must start with a
letter, end with a letter or digit, and have only letters, digits,
and hyphen as interior ch…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.23
swL3IpCtrlDhcpv6ClientPDState
The state of the Dhcpv6 Client PD.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.24
swL3IpCtrlDhcpv6ClientPDPrefixName
This object indicates the name for the DHCPv6 Client PD. If the
swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.25
swL3IpCtrlDhcpv6ClientPDPrefix
The IPv6 prefix obtained form delegation router.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.26
swL3IpCtrlDhcpv6ClientPDPrefixLen
The IPv6 prefix length for the prefix obtained from delegation router.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.27
swL3IpCtrlIpv6AutoConfigState
The state of IPv6 stateless adddress autoconfig.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.28
swL3IpCtrlIpv6AutoConfigDefault
When this is true(1), a default route will be installed into ipv6
routing table. When false(2), no default route will be installed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.29
swL3IpCtrlDhcpv6ClientRapidCommit
When this is true(1), Allows the two-message exchange method for
address assignment.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.30
swL3IpCtrlDhcpv6ClientPDRapidCommit
When this is true(1), Allows the two-message exchange method for
prefix assignment.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.3.1.31

swL3Ipv6CtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.1.4 · 1 row entry · 13 columns
Open in standard view 
This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1
A list of IPv6 information about a specific IP interface.
Indexes
swL3Ipv6CtrlInterfaceName
Column Syntax OID
swL3Ipv6CtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.1
swL3Ipv6CtrlMaxReassmblySize
Maximum Reassembly Size of the IP interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.2
swL3Ipv6CtrlNsRetransTimer
Neighbor solicitation's retransmit timer.
The unit is set in milliseconds.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.3
swL3Ipv6CtrlRaState
Neighbor solicited state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.5
swL3Ipv6CtrlRaMinRtrAdvInterval
The minimum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInt…
Integer32r/w
Constraints:
range: 3-1350
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.6
swL3Ipv6CtrlRaMaxRtrAdvInterval
The maximum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.7
swL3Ipv6CtrlRaLifeTime
Indicates the lifetime of the router as the default router.
Integer32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.8
swL3Ipv6CtrlRaReachableTime
Indicates the amount of time that a node can consider a neighboring
node reachable after receiving a reachability confirmation.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.9
swL3Ipv6CtrlRaRetransTime
Indicates the amount of time between retransmissions of neighbor
solicited messages.
The unit is set in millisecond.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.10
swL3Ipv6CtrlRaHopLimit
Indicates the default value of the hop limit field in the IPv6 header for
packets sent by hosts that receive this RA message.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.11
swL3Ipv6CtrlRaManagedFlag
When enabled, it indicates that hosts receiving this RA must use a
stateful address configuration protocol to obtain an address in the addition
to the addresses derived from the stateless address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.12
swL3Ipv6CtrlRaOtherConfigFlag
When enabled, it indicates that hosts receiving this RA must use a stateful
address configuration protocol to obtain an on-link address configuration information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.13
swL3Ipv6CtrlDadRetransNum
Indicates the value of duplicate address detection attempt number
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.4.1.14

swL3Ipv6AddressCtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.1.5 · 1 row entry · 9 columns
Open in standard view 
This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1
A list of information about a specific IPv6 address.
Indexes
swL3Ipv6AddressCtrlInterfaceName swL3Ipv6Address swL3Ipv6AddressCtrlPrefixLen
Column Syntax OID
swL3Ipv6AddressCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.1
swL3Ipv6Address
Specify the IPv6 address.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.2
swL3Ipv6AddressCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.3
swL3Ipv6AddressCtrlPreferredLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains in preferred state.
For an infinite valid lifetime, the value can be set to 0xfffffff…
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.4
swL3Ipv6AddressCtrlValidLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains valid.
For an infinite valid lifetime, the value can be set to 0xffffffff.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.5
swL3Ipv6AddressCtrlOnLinkFlag
When enabled, the address implied by the specified prefix is available
on the link where the RA message is received.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.6
swL3Ipv6AddressCtrlAutonomousFlag
When enabled, the specified prefix will be used to create an autonomous address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.7
swL3Ipv6AddressCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.8
swL3Ipv6AddressCtrlAddressType
This object indicates the type of the IPv6 address.
manual(1): the IPv6 address is configured by user.
dhcpv6(2): the IPv6 address is assigned by DHCPv6 server.
stateless(3): the IPv6 address is assigned by router adver…
Enumeration
Enumerated Values:
1manual
2dhcpv6
3stateless
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.5.1.9

swL3Ipv6DHCPv6CPDAddrCtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.1.6 · 1 row entry · 5 columns
Open in standard view 
This table contain the information of the IPv6 address which based on DHCPv6 client PD.
swL3Ipv6DHCPv6CPDAddrCtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1
A list of information about a specific DHCPv6 Client PD IPv6 address.
Indexes
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName swL3Ipv6DHCPv6CPDAddrCtrlPrefixName swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen
Column Syntax OID
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.1
swL3Ipv6DHCPv6CPDAddrCtrlPrefixName
This object indicates the name of the prefix based on
which the IPv6 address will be generate.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.2
swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr
Specify the suffix of the IPv6 address.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.3
swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.4
swL3Ipv6DHCPv6CPDAddrCtrlState
This variable displays the status of the entry. The status is used
for creating and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.6.1.5

swL3LoopBackIpCtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.1.8 · 1 row entry · 6 columns
Open in standard view 
This table contains loopback IP interface information.
swL3LoopBackIpCtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1
A list of information about a specific loopback IP interface.
Indexes
swL3LoopBackIpCtrlInterfaceName
Column Syntax OID
swL3LoopBackIpCtrlInterfaceName
This object indicates the name of the loopback IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.1
swL3LoopBackIpCtrlIfIndex
This object uniquely identifies the loopback IP interface number in the
swL3LoopBackIpCtrlTable.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.2
swL3LoopBackIpCtrlIpAddr
The IP address of the loopback interface. This object only can take the
value of the unicast IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.3
swL3LoopBackIpCtrlIpSubnetMask
The IP net mask for this loopback interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.4
swL3LoopBackIpCtrlAdminState
The state of the loopback IP interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.5
swL3LoopBackIpCtrlRowStatus
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.133.5.1.3.2.1.8.1.6

swL3IpFdbInfoTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.2.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets.
swL3IpFdbInfoEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1
Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.
Indexes
swL3IpFdbInfoIpAddr
Column Syntax OID
swL3IpFdbInfoIpAddr
A IP address for which switch has forwarding and/or filtering
information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask
A IP net mask for this interface for which the switch has
forwarding and/or filtering information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.2
swL3IpFdbInfoPort
Either the value '0', or the port number of the port on which
packet having a IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port nu…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.3
swL3IpFdbInfoType
The status of this entry.
Enumeration
Enumerated Values:
1other
2static
3dynamic
 .1.3.6.1.4.1.171.11.133.5.1.3.2.2.1.1.4

swL3IpStaticRouteTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.2.5 · 1 row entry · 9 columns
Open in standard view 
This entity's IP static Routing table.
swL3IpStaticRouteEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1
A particular route to a particular destination, under a particular policy.
Once an entry is built,it shouldn't be modified.That is,it just supports
create and delete actions.
Indexes
swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteNextHop
Column Syntax OID
swL3IpStaticRouteDest
The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a valu…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.1
swL3IpStaticRouteMask
Indicate the mask to be logical-AND with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent c…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.2
swL3IpStaticRouteBkupState
The routing state for this route.The value SHOULD be
primary(1), backup(2) or none(3).
Enumerationr/w
Enumerated Values:
1primary
2backup
3none
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.3
swL3IpStaticRouteNextHop
Specifies the IP address for the next hop router.
An IP address of 255.255.255.255 denotes a Null interface
as the next hop.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.4
swL3IpStaticRouteMetric
Specifies the routing metric for this route.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.5
swL3IpStaticRouteStatus
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
4active
5inActive
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.6
swL3IpStaticRouteWeight
Specifies the weight value. Used for the weighted multipath.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.7
swL3IpStaticRouteInterfaceName
Specifies the name of the IP interface.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.8
swL3IpStaticRouteCost
Specifies the cost of the Route Entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.133.5.1.3.2.5.1.9

swL3RelayDnsCtrlTable

table
.1.3.6.1.4.1.171.11.133.5.1.3.3.2.6 · 1 row entry · 3 columns
Open in standard view 
This table displays the current DNS relay static table.
swL3RelayDnsCtrlEntry entry .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1
A list of information display the current DNS relay static
table.
Indexes
swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr
Column Syntax OID
swL3RelayDnsCtrlDomainName
The domain name of the entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr
The IP address of the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.2
swL3RelayDnsCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.133.5.1.3.3.2.6.1.3