DGS-3700-12-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

swL2DevCtrlCFMPortTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.1.2.21.2 · 1 row entry · 2 columns

Open in standard view

A table containing CFM state of speicified ports.

swL2DevCtrlCFMPortEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.1.2.21.2.1

The entry of CFM state on speicified ports.

Indexes

No indexes recorded

Column	Syntax	OID
swL2DevCtrlCFMPortIndex This object indicates the port-num.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.102.1.1.2.1.2.21.2.1.1`
swL2DevCtrlCFMPortState This object indicates the CFM state on per-port.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.1.2.21.2.1.2`

swL2VlanStaticTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.2.1 · 1 row entry · 2 columns

Open in standard view

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

swL2VlanStaticEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.2.1.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

No indexes recorded

Column	Syntax	OID
swL2VlanIndex The VLAN-ID or other identifier referring to this VLAN.	VlanId Textual Convention: VlanId `Integer32` Type Constraints: `range: 1..4094`	`.1.3.6.1.4.1.171.11.102.1.1.2.2.1.1.1`
swL2VLANAdvertisement This object indicates if the advertisement is active or not.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.2.1.1.2`

swL2VlanPortInfoTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.2.3 · 1 row entry · 3 columns

Open in standard view

A table containing vlan and port role information of each port.

swL2VlanPortInfoEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.2.3.1

The table entry of vlan port information.

Indexes

No indexes recorded

Column	Syntax	OID
swL2VlanPortInfoPortIndex The port index.	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.2.3.1.1`
swL2VlanPortInfoVid The VLAN-ID assigned to a special port	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.2.3.1.2`
swL2VlanPortInfoPortRole The port role of a special port.when none,it means this port is not belong to the vlan.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.2.3.1.3`

swL2PortInfoTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.3.1 · 1 row entry · 7 columns

Open in standard view

A table that contains information about every port.

swL2PortInfoEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.3.1.1

A list of information for each port of the device.

Indexes

No indexes recorded

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.1`
swL2PortInfoMediumType Indicates medium type of the port number.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.2`
swL2PortInfoUnitID Indicates ID of the unit in the system	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.3`
swL2PortInfoType This object indicates the connector type of this port.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.4`
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.5`
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.6`
swL2PortInfoErrorDisabled This object indicates the blocking type of this port.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.1.1.8`

swL2PortCtrlTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.3.2 · 1 row entry · 8 columns

Open in standard view

A table that contains control information about every port.

swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.3.2.1

A list of control information for each port of the device.

Indexes

No indexes recorded

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.1`
swL2PortCtrlMediumType Indicates medium type of the port number.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.2`
swL2PortCtrlUnitIndex Indicates ID of the unit in the device	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.3`
swL2PortCtrlAdminState This object decides if the port is enabled or disabled.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.4`
swL2PortCtrlNwayState Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.5`
swL2PortCtrlFlowCtrlState The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and…	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.6`
swL2PortCtrlLearningState This object decides if the port is locked or not.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.7`
swL2PortCtrlMACNotifyState This object sets each port's MAC notification state.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.2.1.8`

swL2PortCounterCtrlTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.3.6 · 1 row entry · 2 columns

Open in standard view

A table that used to clear counter information about every port.

swL2PortCounterCtrlEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.3.6.1

A list of entry used to clear counter information for each port of the device.

Indexes

No indexes recorded

Column	Syntax	OID
swL2PortCounterCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.6.1.1`
swL2PortCounterClearCtrl This object indicates if to clear the counters for each port of the device or not.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.3.6.1.2`

swL2PortErrTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.3.7 · 1 row entry · 4 columns

Open in standard view

A table that contains error information for each port.

swL2PortErrEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.3.7.1

A list of information regarding port errors on the device.

Indexes

No indexes recorded

Column	Syntax	OID
swL2PortErrPortIndex This object indicates the module's port number.(1..Max port number in the module).	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.3.7.1.1`
swL2PortErrPortState This object indicates the port state is enabled or disabled.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.7.1.2`
swL2PortErrPortConnStatus This object indicates whether the PortStatus is err-disabled or not.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.7.1.3`
swL2PortErrPortReason This object describes if the reason for the port error is STP LBD or Storm control.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.3.7.1.4`

swL2TrunkCtrlTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.9.3 · 1 row entry · 6 columns

Open in standard view

This table specifies which ports group a set of ports(up to 8)
into a single logical link.

swL2TrunkCtrlEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.9.3.1

A list of information that specifies which ports group a set of
ports(up to 8) into a single logical link.

Indexes

No indexes recorded

Column Syntax OID

swL2TrunkIndex

The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module.

Integer32

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.1

swL2TrunkMasterPort

The object indicates the master port number of the port trunk
entry. When using Port Trunk, you cannot configure the other
ports of the group except the master port.
Their configuration must be same as the master port (…

Integer32r/w

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.3

swL2TrunkMember

Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group.

PortListr/w

Textual Convention: PortList OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.4

swL2TrunkFloodingPort

The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port.

Integer32

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.5

swL2TrunkType

This object indicates the type of trunk group.
static : is static trunk group
lacp : is LACP trunk group .

Enumerationr/w

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.6

swL2TrunkState

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.11.102.1.1.2.9.3.1.7

swL2TrunkLACPPortTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.9.5 · 1 row entry · 2 columns

Open in standard view

This table specifies which ports group a set of ports(up to 8)
into a single logical link.

swL2TrunkLACPPortEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.9.5.1

A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.

Indexes

No indexes recorded

Column	Syntax	OID
swL2TrunkLACPPortIndex The index of logical port LACP.	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.9.5.1.1`
swL2TrunkLACPPortState The state of logical port LACP.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.9.5.1.2`

swL2TrafficSegTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.14.1 · 1 row entry · 2 columns

Open in standard view

This table specifies that the port can just forward traffic to the
specific port list.

swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.14.1.1

A list of information which specifies the port with its traffic
forwarding list.

Indexes

No indexes recorded

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.14.1.1.1`
swL2TrafficSegForwardPorts The port list to which the specific port can forward traffic.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.102.1.1.2.14.1.1.2`

swL2MulticastFilterModeVlanTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.17.1 · 1 row entry · 2 columns

Open in standard view

A table that contains information about VLAN multicast filter mode.

swL2MulticastFilterModeVlanEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.17.1.1

A list of multicast filter mode information for each VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
swL2MulticastFilterVid Indicates VID for each VLAN.	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.17.1.1.1`
swL2MulticastFilterVlanMode Specifies multicast filter mode for each VLAN.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.17.1.1.2`

swL2LoopDetectPortTable

table

.1.3.6.1.4.1.171.11.102.1.1.2.18.2.1 · 1 row entry · 4 columns

Open in standard view

The table specifies the loopback detection function specified by port.

swL2LoopDetectPortEntry entry .1.3.6.1.4.1.171.11.102.1.1.2.18.2.1.1

The table specifies the loopback detection function specified by port.

Indexes

No indexes recorded

Column	Syntax	OID
swL2LoopDetectPortIndex This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module	Integer32	`.1.3.6.1.4.1.171.11.102.1.1.2.18.2.1.1.1`
swL2LoopDetectPortState This object indicates the loopback detection function state on the port.	Enumerationr/w	`.1.3.6.1.4.1.171.11.102.1.1.2.18.2.1.1.2`
swL2LoopDetectPortLoopVLAN This object indicates the VLAN list that has detected a loopback.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.171.11.102.1.1.2.18.2.1.1.3`
swL2LoopDetectPortLoopStatus This object indicates the port status.	Enumeration	`.1.3.6.1.4.1.171.11.102.1.1.2.18.2.1.1.4`