DES3852P-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

swL2PortCtrlTable

table obsolete

.1.3.6.1.4.1.171.11.69.5.2.4.2 · 1 row entry · 7 columns

Open in standard view

A table that contains control information about every port.

swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.69.5.2.4.2.1

A list of control information for each port of the device.

Indexes

swL2PortCtrlPortIndex

Column Syntax OID

swL2PortCtrlPortIndex obsolete

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.1

swL2PortCtrlUnitIndex obsolete

Indicates the ID of the unit in the device

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.2

swL2PortCtrlAdminState obsolete

This object decides whether the port is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.3

swL2PortCtrlNwayState obsolete

Choose the port speed, duplex mode, and N-Way function mode.

Enumerationr/w

Enumerated Values:

1	other
2	nway-enabled
3	nway-disabled-10Mbps-Half
4	nway-disabled-10Mbps-Full
5	nway-disabled-100Mbps-Half
6	nway-disabled-100Mbps-Full
7	nway-disabled-1Gigabps-Half
8	nway-disabled-1Gigabps-Full

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.4

swL2PortCtrlFlowCtrlState obsolete

The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, IEEE 802.3x flow
control function sends PAUSE frames and…

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.5

swL2PortCtrlLockState obsolete

This object decides whether the port is locked or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.6

swL2PortCtrlMACNotifyState obsolete

This object decides whether MAC notification is enabled or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.2.1.7

swL2PortInformationTable

table

.1.3.6.1.4.1.171.11.69.5.2.4.4 · 1 row entry · 8 columns

Open in standard view

A table that contains information about every port.

swL2PortInformationEntry entry .1.3.6.1.4.1.171.11.69.5.2.4.4.1

A list of information for each port of the device.

Indexes

swL2PortInformationPortIndex swL2PortInformationMediumType

Column Syntax OID

swL2PortInformationPortIndex

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.1

swL2PortInformationMediumType

Indicates medium type of the port number.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.2

swL2PortInformationUnitID

Indicates ID of the unit in the system

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.3

swL2PortInformationType

This object indicates the connector type of this port.

Enumeration

Enumerated Values:

1	portType-100Base-TX
2	portType-100Base-FX
3	portType-100Base-FL
4	portType-1000Base-TX
5	portType-1000Base-SX
6	portType-1000Base-LX
7	portType-1000Base-SX-GBIC
8	portType-1000Base-LX-GBIC
9	portType-1000Base-TX-GBIC
10	portType-1000Base-1394
11	portType-1000Base-TX-GBIC-COMBO
12	portType-1000Base-none-GBIC
13	portType-1000Base-SX-MGBIC
14	portType-1000Base-LX-MGBIC
15	portType-1000Base-TX-MGBIC
16	portType-1000Base-none-MGBIC
17	portType-SIO
18	portType-10G
19	portType-10G-xenpak-1310nm
20	portType-10G-xenpak-850nm
21	portType-10G-xenpak-empty
22	portType-10G-xfp-1310nm
23	portType-10G-xfp-850nm
24	portType-10G-xfp-empty
25	portType-none

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.4

swL2PortInformationLinkStatus

This object indicates the port link status.

Enumeration

Enumerated Values:

1	other
2	link-pass
3	link-fail

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.5

swL2PortInformationNwayStatus

This object indicates the port speed and duplex mode.

Enumeration

Enumerated Values:

0	other
1	empty
2	link-down
3	half-10Mbps
4	full-10Mbps
5	half-100Mbps
6	full-100Mbps
7	half-1Gigabps
8	full-1Gigabps
9	full-10Gigabps

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.6

swL2PortInformationModuleType

This object indicates the module type of this port.

Enumeration

Enumerated Values:

0	none
1	moduleType-COMBO
2	moduleType-1394
3	moduleType-1000T
4	moduleType-MGBIC
5	moduleType-1P-SC-SX
6	moduleType-2P-SC-SX
7	moduleType-1P-SC-LX
8	moduleType-2P-SC-LX
9	moduleType-1P-TX
10	moduleType-2P-TX
11	moduleType-1P-MTRJ-SX
12	moduleType-2P-MTRJ-SX
13	moduleType-1P-MTRJ-LX
14	moduleType-2P-MTRJ-LX
15	moduleType-1P-GBIC
16	moduleType-2P-GBIC
17	moduleType-1P-GBIC-1P-TX
18	moduleType-1P-GBIC-1P-STACK
19	moduleType-2P-STACK
20	moduleType-2P-100FX
21	moduleType-1P-100FX
22	moduleType-2P-100FX-NEW
23	moduleType-1P-100FL
24	moduleType-2P-100FL
25	moduleType-2P-100TX
26	moduleType-BaseModule-24PORT

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.7

swL2PortInformationErrorDisabled

This object indicates the blocking type of this port.

Enumeration

Enumerated Values:

0	none
1	storm
2	lbd
3	unknow

.1.3.6.1.4.1.171.11.69.5.2.4.4.1.8

swL2PortControlTable

table

.1.3.6.1.4.1.171.11.69.5.2.4.5 · 1 row entry · 9 columns

Open in standard view

A table that contains control information about every port.

swL2PortControlEntry entry .1.3.6.1.4.1.171.11.69.5.2.4.5.1

A list of control information for each port of the device.

Indexes

swL2PortControlPortIndex swL2PortControlMediumType

Column Syntax OID

swL2PortControlPortIndex

This object indicates the module's port number.(1..Max port
number in the module)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.1

swL2PortControlMediumType

Indicates the medium type of the port number.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.2

swL2PortControlUnitIndex

Indicates ID of the unit in the device

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.3

swL2PortControlAdminState

This object decides if the port is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.4

swL2PortControlNwayState

Choose the port speed, duplex mode, and N-Way function mode.

Enumerationr/w

Enumerated Values:

1	other
2	nway-enabled
3	nway-disabled-10Mbps-Half
4	nway-disabled-10Mbps-Full
5	nway-disabled-100Mbps-Half
6	nway-disabled-100Mbps-Full
7	nway-disabled-1Gigabps-Half
8	nway-disabled-1Gigabps-Full
9	nway-disabled-1Gigabps-Full-master
10	nway-disabled-1Gigabps-Full-slave

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.5

swL2PortControlFlowCtrlState

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.6

swL2PortControlLearningState

This object decides whether the port is locked or not.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.7

swL2PortControlMACNotifyState

This object sets each port's MAC notification state.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.8

swL2PortControlMulticastfilter

This object controls the multicast port filtering mode for a specified port.

Enumerationr/w

Enumerated Values:

0	other
1	forward-all-groups
2	forward-unregistered-groups
3	filter-unregistered-groups

.1.3.6.1.4.1.171.11.69.5.2.4.5.1.9

swL2QOSBandwidthControlTable

table

.1.3.6.1.4.1.171.11.69.5.2.6.1 · 1 row entry · 5 columns

Open in standard view

swL2QOSBandwidthControlEntry entry .1.3.6.1.4.1.171.11.69.5.2.6.1.1

A list of information contained in swL2QOSBandwidthControlTable.

Indexes

swL2QOSBandwidthPortIndex

Column	Syntax	OID
swL2QOSBandwidthPortIndex Indicates the port.	Integer32 Constraints: `range: 1-650`	`.1.3.6.1.4.1.171.11.69.5.2.6.1.1.1`
swL2QOSBandwidthRxRate Indicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit.	Integer32r/w Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.171.11.69.5.2.6.1.1.2`
swL2QOSBandwidthTxRate Indicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit.	Integer32r/w Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.171.11.69.5.2.6.1.1.3`
swL2QOSBandwidthRadiusRxRate The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.69.5.2.6.1.1.4`
swL2QOSBandwidthRadiusTxRate The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.69.5.2.6.1.1.5`

swL2QOSSchedulingTable

table

.1.3.6.1.4.1.171.11.69.5.2.6.2 · 1 row entry · 2 columns

Open in standard view

swL2QOSSchedulingEntry entry .1.3.6.1.4.1.171.11.69.5.2.6.2.1

A list of information contained in swL2QOSSchedulingTable.

Indexes

swL2QOSSchedulingClassIndex

Column	Syntax	OID
swL2QOSSchedulingClassIndex Indicates the hardware queue number.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.69.5.2.6.2.1.1`
swL2QOSSchedulingMaxPkts Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.171.11.69.5.2.6.2.1.2`

swL2QOS8021pUserPriorityTable

table

.1.3.6.1.4.1.171.11.69.5.2.6.3 · 1 row entry · 2 columns

Open in standard view

swL2QOS8021pUserPriorityEntry entry .1.3.6.1.4.1.171.11.69.5.2.6.3.1

A list of information contained in swL2QOS8021pUserPriorityTable.

Indexes

swL2QOS8021pUserPriorityIndex

Column	Syntax	OID
swL2QOS8021pUserPriorityIndex The 802.1p user priority .	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.69.5.2.6.3.1.1`
swL2QOS8021pUserPriorityClass The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.69.5.2.6.3.1.2`

swL2QOS8021pDefaultPriorityTable

table

.1.3.6.1.4.1.171.11.69.5.2.6.4 · 1 row entry · 3 columns

Open in standard view

swL2QOS8021pDefaultPriorityEntry entry .1.3.6.1.4.1.171.11.69.5.2.6.4.1

A list of information contained in swL2QOS8021pDefaultPriorityTable.

Indexes

swL2QOS8021pDefaultPriorityIndex

Column	Syntax	OID
swL2QOS8021pDefaultPriorityIndex Indicates the port number.	Integer32 Constraints: `range: 1-650`	`.1.3.6.1.4.1.171.11.69.5.2.6.4.1.1`
swL2QOS8021pDefaultPriority The priority value to assign to untagged packets received by the switch ports on the switch.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.11.69.5.2.6.4.1.2`
swL2QOS8021pRadiusPriority Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.11.69.5.2.6.4.1.3`

swL2TrunkCtrlTable

table

.1.3.6.1.4.1.171.11.69.5.2.8.3 · 1 row entry · 7 columns

Open in standard view

This table specifies which ports are grouped as a set of ports(up to 8)
into a single logical link.

swL2TrunkCtrlEntry entry .1.3.6.1.4.1.171.11.69.5.2.8.3.1

A list of information specifies which ports are grouped as a set of
ports(up to 8) into a single logical link.

Indexes

swL2TrunkIndex

Column Syntax OID

swL2TrunkIndex

The index of logical port trunk. The trunk group number depends
on the existence of the unit and module.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.1

swL2TrunkName

The name of logical port trunk.

OctetStringr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.2

swL2TrunkMasterPort

The object indicates the master port number of the port trunk
entry. When using Port Trunk, you can not configure the other
ports of the group except the master port.
Their configuration must be the same as the master p…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.3

swL2TrunkMember

Indicates how many ports are included in this Trunk.
The trunk port number depends on the existence of module.
The maximum number of ports is 8 for one trunks.

PortListr/w

Textual Convention: PortList OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.4

swL2TrunkFloodingPort

The object indicates the flooding port number of the port trunk
entry. The first port of the trunk is implicitly configured to
be the flooding port.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.5

swL2TrunkType

This object indicates the type of the trunk group.
static : is static trunk group
lacp : is LACP trunk group .

Enumerationr/w

Enumerated Values:

1	other
2	static
3	lacp

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.6

swL2TrunkState

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.11.69.5.2.8.3.1.7

swL2IGMPCtrlTable

table

.1.3.6.1.4.1.171.11.69.5.2.10.3 · 1 row entry · 12 columns

Open in standard view

This table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled
mode, there is only one entry in the table, with index 1. If
VLAN is in Port-Base or 802.1q mode, the number of entries can
be up to 12, with an index range from 1 to 12.

swL2IGMPCtrlEntry entry .1.3.6.1.4.1.171.11.69.5.2.10.3.1

The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column Syntax OID

swL2IGMPCtrlVid

This object indicates the IGMP control entry's VLAN ID. If VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Base mode, the VID is
arranged from 1 to 12, fixed form. If …

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.1

swL2IGMPQueryInterval

The frequency at which the IGMP Host-Query packets are
transmitted on this switch.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.2

swL2IGMPMaxResponseTime

The maximum query response time on this switch.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.3

swL2IGMPRobustness

The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have a high
loss, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet los…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.4

swL2IGMPLastMemberQueryInterval

The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.5

swL2IGMPHostTimeout

The timer value for sending IGMP query packet when none was
sent by the host in the LAN. The timer works in per-VLAN basis.
Our device will be activated to send the query message if the
timer has expired. Please referen…

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.6

swL2IGMPRouteTimeout

The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages.

Integer32r/w

Constraints:
range: 1-16711450

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.7

swL2IGMPLeaveTimer

When a query receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left.

Integer32r/w

Constraints:
range: 0-16711450

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.8

swL2IGMPQueryState

This object decides if the IGMP query is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.9

swL2IGMPCurrentState

This object indicates the current IGMP query state.

Enumeration

Enumerated Values:

1	other
2	querier
3	non-querier

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.10

swL2IGMPCtrlState

This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different for each of the following
values.
disable(2…

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.11

swL2IGMPFastLeaveState

This object indicates the fast_leave status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
value…

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable

.1.3.6.1.4.1.171.11.69.5.2.10.3.1.12

swL2IGMPQueryInfoTable

table

.1.3.6.1.4.1.171.11.69.5.2.10.4 · 1 row entry · 3 columns

Open in standard view

The table contains the current number of IGMP query packets which
have been captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry entry .1.3.6.1.4.1.171.11.69.5.2.10.4.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entires are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.10.4.1.1`
swL2IGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.10.4.1.2`
swL2IGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.10.4.1.3`

swL2IGMPInfoTable

table

.1.3.6.1.4.1.171.11.69.5.2.10.5 · 1 row entry · 5 columns

Open in standard view

The table containing current IGMP information which have been captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled. Note
that the priority of IGMP table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the IGMP Table and the Filtering Table inside the switch H/W
address table, the Filtering Table entry will overwrite the
colliding entry of the IGMP Table. See swL2FilterMgmt description
also.

swL2IGMPInfoEntry entry .1.3.6.1.4.1.171.11.69.5.2.10.5.1

Information about current IGMP information which was captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entries are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVid This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.10.5.1.1`
swL2IGMPGroupIpAddr This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.171.11.69.5.2.10.5.1.2`
swL2IGMPMacAddr This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.11.69.5.2.10.5.1.3`
swL2IGMPPortMap This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port…	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.69.5.2.10.5.1.4`
swL2IGMPIpGroupReportCount This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.10.5.1.5`

swL2IGMPMulticastVlanTable

table

.1.3.6.1.4.1.171.11.69.5.2.10.6 · 1 row entry · 5 columns

Open in standard view

The information of the IGMP snooping multicast VLAN table.

swL2IGMPMulticastVlanEntry entry .1.3.6.1.4.1.171.11.69.5.2.10.6.1

The entry of swL2IGMPMulticastVlanTable.

Indexes

swL2IGMPMulticastVlanid

Column Syntax OID

swL2IGMPMulticastVlanid

This object indicates the VLAN id of the IGMP snooping multicast
VLAN entry.

Integer32

Constraints:
range: 2-4094

.1.3.6.1.4.1.171.11.69.5.2.10.6.1.1

swL2IGMPMulticastVlanName

This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.11.69.5.2.10.6.1.2

swL2IGMPMulticastVlanSourcePort

This object indicates the portlist of the source ports of IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports would be f…

PortListr/w

Textual Convention: PortList OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.69.5.2.10.6.1.3

swL2IGMPMulticastVlanMemberPort

This object indicates the portlist of the member ports of IGMP
snooping multicast VLAN. The source ports will be set to untag ports
of the vlan entry and the IGMP control messages received from the
member ports would be…

PortListr/w

Textual Convention: PortList OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.171.11.69.5.2.10.6.1.4

swL2IGMPMulticastVlanRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.11.69.5.2.10.6.1.5

swL2IGMPRouterPortTable

table

.1.3.6.1.4.1.171.11.69.5.2.10.7 · 1 row entry · 5 columns

Open in standard view

The information of the router port table.

swL2IGMPRouterPortEntry entry .1.3.6.1.4.1.171.11.69.5.2.10.7.1

The entry of swL2IGMPRouterPortTable.

Indexes

swL2IGMPRouterPortVlanid

Column	Syntax	OID
swL2IGMPRouterPortVlanid This object indicates the VLAN id of the router port entry.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.11.69.5.2.10.7.1.1`
swL2IGMPRouterPortVlanName This object indicates the VLAN name of the router port entry.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.11.69.5.2.10.7.1.2`
swL2IGMPRouterPortStaticPortList This object indicates the static portlist of the router port entry.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.69.5.2.10.7.1.3`
swL2IGMPRouterPortDynamicPortList This object indicates the dynamic portlist of the router port entry.	PortList Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.69.5.2.10.7.1.4`
swL2IGMPRouterPortForbiddenPortList This object indicates the forbidden portlist of the router port entry.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.69.5.2.10.7.1.5`

swL2TrafficSegTable

table

.1.3.6.1.4.1.171.11.69.5.2.13.1 · 1 row entry · 2 columns

Open in standard view

This table specifies that the port can just forward traffic to the
specific port list.

swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.69.5.2.13.1.1

A list of information specifying the port with its traffic
forward list.

Indexes

swL2TrafficSegPort

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.11.69.5.2.13.1.1.1`
swL2TrafficSegForwardPorts The port list that the specific port can forward traffic to.	PortListr/w Textual Convention: PortList `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.171.11.69.5.2.13.1.1.2`

swL2PortSecurityControlTable

table

.1.3.6.1.4.1.171.11.69.5.2.14.1 · 1 row entry · 4 columns

Open in standard view

The port security feature controls the address learning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as a
static entry. When the learned addresses number reaches N, any incoming packet that
has not learned a source address is discarded (e.g. dropped) and no more new addresses
can be learned on this port.

swL2PortSecurityControlEntry entry .1.3.6.1.4.1.171.11.69.5.2.14.1.1

A list of information contained in the swL2PortSecurityControlTable.

Indexes

swL2PortSecurityPortIndex

Column Syntax OID

swL2PortSecurityPortIndex

Indicates the secured port to lock address learning.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.171.11.69.5.2.14.1.1.1

swL2PortSecurityMaxLernAddr

Indicates allowable number of addresses to be learned at this port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.11.69.5.2.14.1.1.2

swL2PortSecurityMode

Indicates the mode of locking address.
In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer
has expired. In this mode, when the locked address has aged
…

Enumerationr/w

Enumerated Values:

1	other
2	permanent
3	deleteOnTimeout
4	deleteOnReset

.1.3.6.1.4.1.171.11.69.5.2.14.1.1.3

swL2PortSecurityAdmState

Indicates the administration state of the locking address.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.171.11.69.5.2.14.1.1.4

DES3852P-L2MGMT-MIB Table View

swDevInfoPowerTable

swL2VlanAdvertisementTable

swL2PortInfoTable

swL2PortCtrlTable

swL2PortInformationTable

swL2PortControlTable

swL2QOSBandwidthControlTable

swL2QOSSchedulingTable

swL2QOS8021pUserPriorityTable

swL2QOS8021pDefaultPriorityTable

swL2TrunkCtrlTable

swL2IGMPCtrlTable

swL2IGMPQueryInfoTable

swL2IGMPInfoTable

swL2IGMPMulticastVlanTable

swL2IGMPRouterPortTable

swL2TrafficSegTable

swL2PortSecurityControlTable