DES-1226G-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
41

commSetTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.1.1 · 1 row entry · 3 columns
Open in standard view 
A list of SNMP Set Community Entries
commSetEntry entry .1.3.6.1.4.1.171.10.75.1.1.1.1
A list of SNMP Set Community properties
Indexes
commSetIndex
Column Syntax OID
commSetIndex mandatory
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.1.1.1.1.1
commSetName mandatory
The name of this SNMP Set Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.1.1.1.1.2
commSetStatus mandatory
The RowStatus for the Set Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.1.1.1.1.3

commGetTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.1.2 · 1 row entry · 3 columns
Open in standard view 
A list of SNMP Get Community Entries
commGetEntry entry .1.3.6.1.4.1.171.10.75.1.1.2.1
A list of SNMP Get Community properties
Indexes
commGetIndex
Column Syntax OID
commGetIndex mandatory
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.1.1.2.1.1
commGetName mandatory
The name of this SNMP Get Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.1.1.2.1.2
commGetStatus mandatory
The RowStatus for the Get Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.1.1.2.1.3

commTrapTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.1.3 · 1 row entry · 7 columns
Open in standard view 
A list of SNMP Trap Community Entries
commTrapEntry entry .1.3.6.1.4.1.171.10.75.1.1.3.1
A list of SNMP Trap Community properties
Indexes
commTrapIndex
Column Syntax OID
commTrapIndex mandatory
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.1.1.3.1.1
commTrapName mandatory
The name of this SNMP Trap Community Entry.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.1.1.3.1.2
commTrapIpAddress mandatory
The IP Address of this SNMP Trap Community Entry.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.1.1.3.1.3
commTrapSNMPBootup mandatory
Bootup trap
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.1.3.1.5
commTrapSNMPTPLinkUpDown mandatory
Twisted Pair link up / link down trap
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.1.3.1.6
commTrapSNMPFiberLinkUpDown mandatory
Fiber link up / link down trap
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.1.3.1.7
commTrapStatus mandatory
The RowStatus for the Trap Community entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.1.1.3.1.13

configPortTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.11.6 · 1 row entry · 6 columns
Open in standard view 
A list of interface entries used for enterprise specific
configuration.  The number of entries is given by the value
of ifNumber.  All interface entries are assumed to be
Ethernet interafaces.
configPortEntry entry .1.3.6.1.4.1.171.10.75.1.11.6.1
An enterprise specific interface entry.
Indexes
configPort
Column Syntax OID
configPort mandatory
A unique value for each interface that correlates to ifIndex.
Its value ranges between 1 and the value of ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.11.6.1.1
configPortSpeed mandatory
The port's speed desired state.
Enumerationr/w
Enumerated Values:
1disable
2auto
3rate10M-Half
4rate10M-Full
5rate100M-Half
6rate100M-Full
7rate1G-Full
 .1.3.6.1.4.1.171.10.75.1.11.6.1.2
configPortOperStatus mandatory
The port's operating speed state.
Enumeration
Enumerated Values:
1down
2rate10M-Half
3rate10M-Full
4rate100M-Half
5rate100M-Full
6rate1G-Half
7rate1G-Full
 .1.3.6.1.4.1.171.10.75.1.11.6.1.3
configPortFlowControl mandatory
The port will avoid transmitting a new packet
for the period of time specified in a received
PAUSE packet when enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.11.6.1.4
configPortFlowControlOper mandatory
The port's operating flow control state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.11.6.1.5
configPortPriority mandatory
The port's current priority.
Enumerationr/w
Enumerated Values:
0qlevel0
1qlevel1
2qlevel2
3qlevel3
4qlevel4
5qlevel5
6qlevel6
7qlevel7
 .1.3.6.1.4.1.171.10.75.1.11.6.1.6

configMirrorTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.11.8 · 1 row entry · 5 columns
Open in standard view 
A list of the Mirror
configMirrorEntry entry .1.3.6.1.4.1.171.10.75.1.11.8.1
A Mirror entry containing the Mirror id and mode
Indexes
configMirrorId
Column Syntax OID
configMirrorId mandatory
An index that uniquely identifies an entry in the
Mirror Table. One entries are currently supported.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.171.10.75.1.11.8.1.1
configMirrorMode mandatory
When deciding the mirroring source port, then Mirror mode will
be available.
Enumerationr/w
Enumerated Values:
0disabled
1rx
2tx
3both
 .1.3.6.1.4.1.171.10.75.1.11.8.1.2
configMirrorMon mandatory
When mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring monitoring
port. This value has a valid range of 1 to ifNumber when
enabled.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.11.8.1.3
configMirrorSrc mandatory
When mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring source port.
This value has a valid range of 1 to ifNumber when enbaled.
Each octet within this value specifies a se…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.11.8.1.4
configMirrorStatus mandatory
The RowStatus for the Mirror entry.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.1.11.8.1.5

tvlanTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.13.1 · 1 row entry · 4 columns
Open in standard view 
A list of the VLANs
tvlanEntry entry .1.3.6.1.4.1.171.10.75.1.13.1.1
A VLAN entry containing the VLAN id and name.
Indexes
tvlanId
Column Syntax OID
tvlanId mandatory
The VLAN identifier. A maximum of 64 VLANs is supported.
The value must be from 2 to 4094.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.13.1.1.1
tvlanMember mandatory
The set of the device's member ports that belong
to the VLAN.

Each octet within the value of this object specifies a
set of eight ports, with the first octet specifying ports
1 through 8, the second octet…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.13.1.1.3
tvlanUntaggedPorts mandatory
If that bit has a value of '1' the outgoing frame on the egress
port is untagged. If that bit has a value of '0' the outgoing
frame on the egress port is tagged.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.13.1.1.4
tvlanStatus mandatory
The status of an entry in the VLAN Table. Only a subset
of the rowstatus variables (active, createAndGo, createAndWait, destroy)
are available.
Enumerationr/w
Enumerated Values:
1active
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.1.13.1.1.5

tvlanPortTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.13.2 · 1 row entry · 2 columns
Open in standard view 
A list of ports and their associated VLAN.
tvlanPortEntry entry .1.3.6.1.4.1.171.10.75.1.13.2.1
Information pertaining to an individual port regarding
to which VLAN it belongs.
Indexes
tvlanPortPortId
Column Syntax OID
tvlanPortPortId mandatory
A port identifier that is in the range of 1 to ifNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.13.2.1.1
tvlanPortVlanId mandatory
The default VLAN identifier.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.13.2.1.2

portTrunkTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.14.1 · 1 row entry · 4 columns
Open in standard view 
A list of port trunks and their associated members.
portTrunkEntry entry .1.3.6.1.4.1.171.10.75.1.14.1.1
A port trunk entry containing the trunk id and trunk members.
Indexes
portTrunkId portTrunkMember
Column Syntax OID
portTrunkId mandatory
The port trunk identifier. The current range is from 1 to 3.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.14.1.1.1
portTrunkMember mandatory
Trunk group 1 - 2 has twelve members (Port 01/13 - 12/24).
Trunk group 3 has two members (Port 25-26).
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the …
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.14.1.1.2
portTrunkMemberValue mandatory
A port trunk member value indicates which port is a
member of the specified trunk. Valid values are in the
range from 0 to ifNumber. A zero indicates that no port
is contained in the specifed member.
Each octet within…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.14.1.1.3
portTrunkEnable mandatory
Enable/Disable Trunk group. A (1) enables, a (2) disables.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.1.14.1.1.4

qos8021pTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.15.2 · 1 row entry · 2 columns
Open in standard view 
A list of priorities and their Queue-Level.
qos8021pEntry entry .1.3.6.1.4.1.171.10.75.1.15.2.1
A 802.1P Based QoS entry containing the priority and Queue-Level.
Indexes
qos8021pPriority
Column Syntax OID
qos8021pPriority mandatory
A priority identifier that is in the range of 0 to 7.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.15.2.1.1
qos8021pQueueLevel mandatory
The priority's Queue-Level.
Enumerationr/w
Enumerated Values:
1normal
2high
 .1.3.6.1.4.1.171.10.75.1.15.2.1.2

staticTable

table mandatory
.1.3.6.1.4.1.171.10.75.1.21.3 · 1 row entry · 5 columns
Open in standard view 
A list of the Static MACs
staticEntry entry .1.3.6.1.4.1.171.10.75.1.21.3.1
A Static MAC entry containing the mac and forwarding port.
Indexes
staticId
Column Syntax OID
staticId mandatory
The Static MAC identifier. A maximum of 60 Static MACs is supported.
The value must be from 1 to 60
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.21.3.1.1
staticMac mandatory
The Static MAC associated with the Id.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.1.21.3.1.2
staticPort mandatory
The Static MAC forwarding port with the ID.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.21.3.1.3
staticVID mandatory
The Static MAC VID with the ID.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.1.21.3.1.4
staticStatus mandatory
The status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
Enumerationr/w
Enumerated Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.171.10.75.1.21.3.1.5