Standard view Table view

DATA-DOMAIN-MIB

        This MIB is used for managing the suite of Data Domain Products.
dataDomainMib 1.3.6.1.4.1.19746
Imported Objects
IF-MIB ifDescr ifIndex
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC DisplayString TEXTUAL-CONVENTION
Type Definitions (194)
AlertDescriptionTC OctetString range: 0..255
AlertIndexTC Integer32 range: 0..2147483647
AlertTimestampTC OctetString range: 0..64
CifsConfigDNSTC OctetString range: 0..1024
CifsConfigDomainControllerTC OctetString range: 0..1024
CifsConfigGroupNameTC OctetString range: 0..255
CifsConfigMaxConnectionTC Unsigned32
CifsConfigMaxOpenFilesPerConnectionTC Unsigned32
CifsConfigModeTC OctetString range: 0..64
CifsConfigNetBIOSHostnameTC OctetString range: 0..255
CifsConfigWINSServerTC OctetString range: 0..1024
CifsOptionsIndexTC Integer32 range: 0..100
CifsOptionsNameTC OctetString range: 0..128
CifsOptionsValueTC OctetString range: 0..128
CifsShareBrowsingTC Enumeration
enabled(1)
disabled(2)
CifsShareClientsTC OctetString range: 0..1024
CifsShareCommentTC OctetString range: 0..255
CifsShareIndexTC Integer32 range: 0..2147483647
CifsShareMaxConnectionTC Unsigned32
CifsShareNameTC OctetString range: 0..255
CifsSharePathTC OctetString range: 0..1024
CifsShareUserTC OctetString range: 0..1024
CifsShareWriteableTC Enumeration
enabled(1)
disabled(2)
CifsStatsDetailsIndexTC Integer32 range: 0..2147483647
CifsStatsSummaryIndexTC Integer32 range: 0..2147483647
CifsStatusTC Enumeration
enabled(1)
enabledRunning(2)
enabledNotRunning(3)
enabledWindbindNotRun(4)
disabled(5)
DateTC OctetString range: 0..16
DdboostAccessClientsAuthModeTC Enumeration
none(0)
oneWay(1)
twoWay(2)
anonymous(3)
DdboostAccessClientsEncryStrengthTC Enumeration
none(0)
medium(2)
high(3)
DDboostStatsIndexTC Integer32 range: 0..2147483647
DDboostStatusTC Enumeration
enabled(1)
disabled(2)
DDboostUserTC OctetString range: 0..1024
DDMibAlertSeverityTC OctetString range: 0..64
DDMibCompressionFactorTC OctetString range: 0..20
DDMibDateTC OctetString range: 0..16
DDMibInteger32TC Integer32
DDMibMemorySizeTC Integer32
DDMibStatusTC Enumeration
enabled(1)
disabled(2)
DDMibString96TC OctetString range: 0..96
DDMibTableEnabledTC Enumeration
no(0)
yes(1)
DDMibTableIndexTC Integer32 range: 0..2147483647
DDMibTableSizeGibTC OctetString range: 0..20
DDMibTableSizeMiBTC OctetString range: 0..32
DDMibTableString1024TC OctetString range: 0..1024
DDMibTableString128TC OctetString range: 0..128
DDMibTableString256TC OctetString range: 0..256
DDMibTableString32TC OctetString range: 0..32
DDMibTableString512TC OctetString range: 0..512
DDMibTableString64TC OctetString range: 0..64
DDMibTimeStampTC OctetString range: 0..64
DDMibTrafficBytesTC Unsigned64
DDMibVersionTC OctetString range: 0..64
DDStatusTC Enumeration
disabled(0)
enabled(1)
DiskCapacityTC OctetString range: 0..20
DiskFirmwareVersionTC OctetString range: 0..64
DiskIndexTC Integer32 range: 0..2147483647
DiskModelTC OctetString range: 0..64
DiskPackTC Enumeration
notapplicable(0)
pack1(1)
pack2(2)
pack3(3)
pack4(4)
DiskSectorsPerSecondTC Unsigned32
DiskSerialNumberTC OctetString range: 0..64
DiskStateTC Enumeration
ok(1)
unknown(2)
absent(3)
failed(4)
spare(5)
available(6)
EnclosureID Integer32 range: 1..2147483647
ErrorCount Unsigned32
FanDescriptionTC OctetString range: 0..64
FanIndexTC Integer32 range: 0..2147483647
FanLevelTC Enumeration
unknown(0)
low(1)
medium(2)
high(3)
FanStatusTC Enumeration
notfound(0)
ok(1)
fail(2)
FileSystemArchiveUnitStateTC Enumeration
new(1)
target(2)
sealed(3)
FileSystemArchiveUnitStatusTC Enumeration
ready(1)
disabled(2)
FileSystemCleanIndexTC Integer32 range: 0..2147483647
FileSystemCleanScheduleTC OctetString range: 0..128
FileSystemCleanStatusTC OctetString range: 0..128
FileSystemCleanThrottleTC OctetString range: 0..128
FileSystemCompressionFactorTC OctetString range: 0..20
FileSystemCompressionPeriodTC OctetString range: 0..20
FileSystemCompressionSizeTC OctetString range: 0..20
FileSystemOptionsIndexTC Integer32 range: 0..2147483647
FileSystemOptionsNameTC OctetString range: 0..128
FileSystemOptionsValueTC OctetString range: 0..128
FileSystemResourceIndexTC Integer32 range: 0..2147483647
FileSystemResourceNameTC OctetString range: 0..64
FileSystemSpaceUnitTC OctetString range: 0..20
FileSystemStatusTC Enumeration
enabled(1)
disabled(2)
running(3)
unknown(4)
error(5)
cleaning(6)
KBytesPerSecond Unsigned32
Minutes Integer32
MtreeListStatusTC Enumeration
deleted(1)
readOnly(2)
readWrite(3)
replicationDestination(4)
retentionLockEnabled(5)
retentionLockDisabled(6)
MtreeRetentionLockStatusTC Enumeration
enabled(1)
disabled(2)
NfsClientClientsTC OctetString range: 0..1024
NfsClientIndexTC Integer32 range: 0..2147483647
NfsClientOptionsTC OctetString range: 0..254
NfsClientPathTC OctetString range: 0..1024
NfsStatsCacheEntryTC Unsigned32
NfsStatsCurrentOpenStreamsTC Unsigned32
NfsStatsExportPointTC OctetString range: 0..254
NfsStatsFileHandleLookupTC Unsigned32
NfsStatsFilesystemTypeTC OctetString range: 0..32
NfsStatsIndexTC Integer32 range: 0..2147483647
NfsStatsMaxCacheSizeTC Unsigned32
NfsStatusTC Enumeration
enabled(1)
disabled(2)
NvramBatteryIndexTC Integer32 range: 0..2147483647
NvramBatteryStatusTC Enumeration
ok(0)
disabled(1)
discharged(2)
softdisabled(3)
NvramHCPropertyBytesTC Unsigned64
NvramIndexTC Integer32 range: 0..2147483647
NvramMemorySizeTC Integer32
NvramWindowSizeTC Integer32
OpsPerSecond Unsigned32
Percentage Integer32 range: 0..100
PercentageStr OctetString range: 0..20
PowerModuleDescriptionTC OctetString range: 0..64
PowerModuleIndexTC Integer32 range: 0..2147483647
PowerModuleStatusTC Enumeration
absent(0)
ok(1)
failed(2)
faulty(3)
acnone(4)
unknown(99)
RaidDiskStateTC Enumeration
inuse(1)
notinuse(2)
spare(3)
absent(4)
failed(5)
invalid(6)
foreign(7)
known(8)
available(9)
unknown(99)
ReplicationConfigConnHostTC OctetString range: 0..256
ReplicationConfigConnPortTC OctetString range: 0..256
ReplicationConfigContextIdTC OctetString range: 0..32
ReplicationConfigDestTC OctetString range: 0..256
ReplicationConfigEnabledTC Enumeration
no(0)
yes(1)
ReplicationConfigIndexTC Integer32 range: 0..2147483647
ReplicationConfigLowBWOptimTC Enumeration
disabled(0)
enabled(1)
ReplicationConfigSourceTC OctetString range: 0..256
ReplicationConnectTimeTC Integer32
ReplicationContextTC Integer32 range: 0..2147483647
ReplicationPathTC OctetString range: 0..254
ReplicationStateTC Enumeration
initializing(1)
normal(2)
recovering(3)
uninitialized(4)
ReplicationStatusTC Enumeration
connected(1)
disconnected(2)
migrating(3)
suspended(4)
neverConnected(5)
idle(6)
ReplicationSyncedTimeTC Integer32
ReplicationThrottleTC Integer32
ReplicationTrafficTC Unsigned64
SmtStatusTC Enumeration
disabled(0)
enabled(1)
SystemNotesTC OctetString range: 0..1024
SystemSerialNumberTC OctetString range: 0..128
SystemStatsIndexTC Integer32 range: 0..2147483647
SystemTimeZoneNameTC OctetString range: 0..64
Temperature Integer32
TempSensorDescriptionTC OctetString range: 0..64
TempSensorIndexTC Integer32 range: 0..2147483647
TempSensorStatusTC Enumeration
failed(0)
ok(1)
notfound(2)
overheatWarning(3)
overheatCritical(4)
TenantUnitMgmtGroupTypeTC Enumeration
all(0)
unknown(1)
local(2)
ad(3)
nis(4)
ldap(5)
TenantUnitMgmtUserListUserRoleTC Enumeration
tenantAdmin(1)
tenantUser(2)
TenantUnitSecurityModeTC Enumeration
strict(1)
default(2)
VtlAdminStateTC Enumeration
unknown(0)
enabled(1)
disabled(2)
failed(3)
VtlDriveIndexTC Integer32 range: 0..512
VtlDriveModelTC OctetString range: 0..64
VtlDriveNameTC OctetString range: 0..64
VtlDriveRevisionTC OctetString range: 0..64
VtlDriveSerialTC OctetString range: 0..64
VtlDriveStatusTC Enumeration
unknown(0)
online(1)
offline(2)
VtlDriveTapeVolumeTC OctetString range: 0..64
VtlDriveVendorTC OctetString range: 0..64
VtlLibraryIndexTC Integer32 range: 0..64
VtlLibraryModelTC OctetString range: 0..64
VtlLibraryNameTC OctetString range: 0..64
VtlLibraryRevisionTC OctetString range: 0..64
VtlLibrarySerialTC OctetString range: 0..64
VtlLibraryStatusTC Enumeration
unknown(0)
online(1)
offline(2)
VtlLibraryTotalCapsTC Unsigned32
VtlLibraryTotalDrivesTC Unsigned32
VtlLibraryTotalSlotsTC Unsigned32
VtlLibraryVendorTC OctetString range: 0..64
VtlPortConnectionTypeTC Enumeration
nPORT(0)
loop(1)
pointToPoint(2)
fabricLoop(3)
unknown(4)
VtlPortEnabledTC Enumeration
disabled(0)
enabled(1)
unknown(2)
VtlPortFirmwareTC OctetString range: 0..32
VtlPortIDTC Unsigned32
VtlPortIndexTC Integer32 range: 0..10
VtlPortModelTC OctetString range: 0..32
VtlPortNameTC OctetString range: 0..32
VtlPortSpeedTC Enumeration
zeroGBPS(0)
oneGBPS(1)
twoGBPS(2)
fourGBPS(3)
eightGBPS(4)
unknown(6)
VtlPortStatusTC Enumeration
offline(0)
online(1)
unknown(2)
VtlPortWWNNTC OctetString range: 0..64
VtlPortWWPNTC OctetString range: 0..64
VtlProcessStateTC Enumeration
unknown(0)
stopped(1)
starting(2)
running(3)
timingout(4)
stopping(5)
stuck(6)
VtlStatsConrolCommandsTC Unsigned64
VtlStatsIndexTC Integer32 range: 0..2147483647
VtlStatsInTC Unsigned64
VtlStatsInvalidCRCsTC Unsigned64
VtlStatsInvalidTxWordsTC Unsigned64
VtlStatsLinkFailuresTC Unsigned64
VtlStatsLIPCountTC Unsigned64
VtlStatsOutTC Unsigned64
VtlStatsPortTC OctetString range: 0..32
VtlStatsPrimSeqProtoErrorsTC Unsigned64
VtlStatsReadCommandsTC Unsigned64
VtlStatsSignalLossesTC Unsigned64
VtlStatsSyncLossesTC Unsigned64
VtlStatsWriteCommandsTC Unsigned64
VtlTapeBarCodeTC OctetString range: 0..64
VtlTapeCompTC OctetString range: 0..32
VtlTapeIndexTC Integer32 range: 0..250000
VtlTapeLocationTC OctetString range: 0..32
VtlTapeModTimeTC OctetString range: 0..32
VtlTapePoolTC OctetString range: 0..32
VtlTapeSizeTC OctetString range: 0..32
VtlTapeStateTC OctetString range: 0..32
VtlTapeUsedTC OctetString range: 0..32
Objects (912)
dataDomainMib .1.3.6.1.4.1.19746
dataDomainMibConformance .1.3.6.1.4.1.19746.0
dataDomainMibCompliances .1.3.6.1.4.1.19746.0.1
dataDomainMibGroups .1.3.6.1.4.1.19746.0.2
dataDomainMibObjects .1.3.6.1.4.1.19746.1
environmentals .1.3.6.1.4.1.19746.1.1
power .1.3.6.1.4.1.19746.1.1.1
powerModules ETHERNET-MIBfunctionETHERNET-MIBmodeETHERNET-MIBalarmETHERNET-MIBmuteETHERNET-MIBdhcpETHERNET-MIBrateConfigETHERNET-MIBrateTypeETHERNET-MIBrateLimit .1.3.6.1.4.1.19746.1.1.1.1
powerModuleTable .1.3.6.1.4.1.19746.1.1.1.1.1
powerModuleEntry powerEnclosureIDpowerModuleIndex .1.3.6.1.4.1.19746.1.1.1.1.1.1
powerEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.1.1.1.1.1.1
powerModuleIndex PowerModuleIndexTC .1.3.6.1.4.1.19746.1.1.1.1.1.1.2
powerModuleDescription PowerModuleDescriptionTC .1.3.6.1.4.1.19746.1.1.1.1.1.1.3
powerModuleStatus PowerModuleStatusTC .1.3.6.1.4.1.19746.1.1.1.1.1.1.4
temperatures .1.3.6.1.4.1.19746.1.1.2
temperatureSensors .1.3.6.1.4.1.19746.1.1.2.1
temperatureSensorTable .1.3.6.1.4.1.19746.1.1.2.1.1
temperatureSensorEntry tempEnclosureIDtempSensorIndex .1.3.6.1.4.1.19746.1.1.2.1.1.1
tempEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.1.2.1.1.1.1
tempSensorIndex TempSensorIndexTC .1.3.6.1.4.1.19746.1.1.2.1.1.1.2
tempSensorTrapIndex TempSensorIndexTC .1.3.6.1.4.1.19746.1.1.2.1.1.1.3
tempSensorDescription TempSensorDescriptionTC .1.3.6.1.4.1.19746.1.1.2.1.1.1.4
tempSensorCurrentValue Temperature .1.3.6.1.4.1.19746.1.1.2.1.1.1.5
tempSensorStatus TempSensorStatusTC .1.3.6.1.4.1.19746.1.1.2.1.1.1.6
fans .1.3.6.1.4.1.19746.1.1.3
fanProperties .1.3.6.1.4.1.19746.1.1.3.1
fanPropertiesTable .1.3.6.1.4.1.19746.1.1.3.1.1
fanPropertiesEntry fanEnclosureIDfanIndex .1.3.6.1.4.1.19746.1.1.3.1.1.1
fanEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.1.3.1.1.1.1
fanIndex FanIndexTC .1.3.6.1.4.1.19746.1.1.3.1.1.1.2
fanTrapIndex FanIndexTC .1.3.6.1.4.1.19746.1.1.3.1.1.1.3
fanDescription FanDescriptionTC .1.3.6.1.4.1.19746.1.1.3.1.1.1.4
fanLevel FanLevelTC .1.3.6.1.4.1.19746.1.1.3.1.1.1.5
fanStatus FanStatusTC .1.3.6.1.4.1.19746.1.1.3.1.1.1.6
cifs .1.3.6.1.4.1.19746.1.10
cifsProperties .1.3.6.1.4.1.19746.1.10.1
cifsStatus CifsStatusTC .1.3.6.1.4.1.19746.1.10.1.1
cifsConfig .1.3.6.1.4.1.19746.1.10.2
cifsConfigMode CifsConfigModeTC .1.3.6.1.4.1.19746.1.10.2.1
cifsConfigWINSServer CifsConfigWINSServerTC .1.3.6.1.4.1.19746.1.10.2.2
cifsConfigNetBIOSHostname CifsConfigNetBIOSHostnameTC .1.3.6.1.4.1.19746.1.10.2.3
cifsConfigDomainController CifsConfigDomainControllerTC .1.3.6.1.4.1.19746.1.10.2.4
cifsConfigDNS CifsConfigDNSTC .1.3.6.1.4.1.19746.1.10.2.5
cifsConfigGroupName CifsConfigGroupNameTC .1.3.6.1.4.1.19746.1.10.2.6
cifsConfigMaxConnection CifsConfigMaxConnectionTC .1.3.6.1.4.1.19746.1.10.2.7
cifsConfigMaxOpenFilesPerConnection deprecated CifsConfigMaxOpenFilesPerConnectionTC .1.3.6.1.4.1.19746.1.10.2.8
cifsConfigMaxOpenFiles SNMPv2-SMICounter32 .1.3.6.1.4.1.19746.1.10.2.9
cifsShare .1.3.6.1.4.1.19746.1.10.3
cifsShareTable .1.3.6.1.4.1.19746.1.10.3.1
cifsShareEntry cifsShareIndex .1.3.6.1.4.1.19746.1.10.3.1.1
cifsShareIndex CifsShareIndexTC .1.3.6.1.4.1.19746.1.10.3.1.1.1
cifsShareName CifsShareNameTC .1.3.6.1.4.1.19746.1.10.3.1.1.2
cifsSharePath CifsSharePathTC .1.3.6.1.4.1.19746.1.10.3.1.1.3
cifsShareClients CifsShareClientsTC .1.3.6.1.4.1.19746.1.10.3.1.1.4
cifsShareUser CifsShareUserTC .1.3.6.1.4.1.19746.1.10.3.1.1.5
cifsShareComment CifsShareCommentTC .1.3.6.1.4.1.19746.1.10.3.1.1.6
cifsShareBrowsing CifsShareBrowsingTC .1.3.6.1.4.1.19746.1.10.3.1.1.7
cifsShareWriteable CifsShareWriteableTC .1.3.6.1.4.1.19746.1.10.3.1.1.8
cifsShareMaxConnection CifsShareMaxConnectionTC .1.3.6.1.4.1.19746.1.10.3.1.1.9
cifsOptions .1.3.6.1.4.1.19746.1.10.5
cifsOptionsTable .1.3.6.1.4.1.19746.1.10.5.1
cifsOptionsEntry cifsOptionsIndex .1.3.6.1.4.1.19746.1.10.5.1.1
cifsOptionsIndex CifsOptionsIndexTC .1.3.6.1.4.1.19746.1.10.5.1.1.1
cifsOptionsName CifsOptionsNameTC .1.3.6.1.4.1.19746.1.10.5.1.1.2
cifsOptionsValue CifsOptionsValueTC .1.3.6.1.4.1.19746.1.10.5.1.1.3
vtl .1.3.6.1.4.1.19746.1.11
vtlProperties .1.3.6.1.4.1.19746.1.11.1
vtlAdminState VtlAdminStateTC .1.3.6.1.4.1.19746.1.11.1.1
vtlProcessState VtlProcessStateTC .1.3.6.1.4.1.19746.1.11.1.2
vtlConfiguration .1.3.6.1.4.1.19746.1.11.2
vtlLibrary .1.3.6.1.4.1.19746.1.11.2.1
vtlLibraryTable .1.3.6.1.4.1.19746.1.11.2.1.1
vtlLibraryEntry vtlLibraryIndex .1.3.6.1.4.1.19746.1.11.2.1.1.1
vtlLibraryIndex VtlLibraryIndexTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.1
vtlLibraryStatus VtlLibraryStatusTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.10
vtlLibraryName VtlLibraryNameTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.2
vtlLibraryVendor VtlLibraryVendorTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.3
vtlLibraryModel VtlLibraryModelTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.4
vtlLibraryRevision VtlLibraryRevisionTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.5
vtlLibrarySerial VtlLibrarySerialTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.6
vtlLibraryTotalDrives VtlLibraryTotalDrivesTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.7
vtlLibraryTotalSlots VtlLibraryTotalSlotsTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.8
vtlLibraryTotalCaps VtlLibraryTotalCapsTC .1.3.6.1.4.1.19746.1.11.2.1.1.1.9
vtlDrive .1.3.6.1.4.1.19746.1.11.2.2
vtlDriveTable .1.3.6.1.4.1.19746.1.11.2.2.1
vtlDriveEntry vtlDriveIndex .1.3.6.1.4.1.19746.1.11.2.2.1.1
vtlDriveIndex VtlDriveIndexTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.1
vtlDriveName VtlDriveNameTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.2
vtlDriveVendor VtlDriveVendorTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.3
vtlDriveModel VtlDriveModelTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.4
vtlDriveRevision VtlDriveRevisionTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.5
vtlDriveSerial VtlDriveSerialTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.6
vtlDriveLibraryName VtlLibraryNameTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.7
vtlDriveStatus VtlDriveStatusTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.8
vtlDriveTapeVolume VtlDriveTapeVolumeTC .1.3.6.1.4.1.19746.1.11.2.2.1.1.9
vtlPort .1.3.6.1.4.1.19746.1.11.2.3
vtlPortTable .1.3.6.1.4.1.19746.1.11.2.3.1
vtlPortEntry vtlPortIndex .1.3.6.1.4.1.19746.1.11.2.3.1.1
vtlPortIndex VtlPortIndexTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.1
vtlPortEnabled VtlPortEnabledTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.10
vtlPortStatus VtlPortStatusTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.11
vtlPortTrapIndex VtlPortIndexTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.12
vtlPortName VtlPortNameTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.2
vtlPortID VtlPortIDTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.3
vtlPortModel VtlPortModelTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.4
vtlPortFirmware VtlPortFirmwareTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.5
vtlPortWWNN VtlPortWWNNTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.6
vtlPortWWPN VtlPortWWPNTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.7
vtlPortConnectionType VtlPortConnectionTypeTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.8
vtlPortSpeed VtlPortSpeedTC .1.3.6.1.4.1.19746.1.11.2.3.1.1.9
vtlTape .1.3.6.1.4.1.19746.1.11.2.4
vtlTapeTable .1.3.6.1.4.1.19746.1.11.2.4.1
vtlTapeEntry vtlTapeIndex .1.3.6.1.4.1.19746.1.11.2.4.1.1
vtlTapeIndex VtlTapeIndexTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.1
vtlTapeBarCode VtlTapeBarCodeTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.2
vtlTapePool VtlTapePoolTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.3
vtlTapeLocation VtlTapeLocationTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.4
vtlTapeState VtlTapeStateTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.5
vtlTapeSize VtlTapeSizeTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.6
vtlTapeUsed VtlTapeUsedTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.7
vtlTapeComp VtlTapeCompTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.8
vtlTapeModTime VtlTapeModTimeTC .1.3.6.1.4.1.19746.1.11.2.4.1.1.9
vtlPool .1.3.6.1.4.1.19746.1.11.2.6
vtlPoolTable .1.3.6.1.4.1.19746.1.11.2.6.1
vtlPoolEntry vtlPoolIndex .1.3.6.1.4.1.19746.1.11.2.6.1.1
vtlPoolIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.11.2.6.1.1.1
vtlPoolPool DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.2
vtlPoolStatus DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.3
vtlPoolTapes DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.4
vtlPoolSize DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.5
vtlPoolUsed DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.6
vtlPoolComp DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.6.1.1.7
vtlGroups .1.3.6.1.4.1.19746.1.11.2.7
vtlGroupTable .1.3.6.1.4.1.19746.1.11.2.7.1
vtlGroupEntry vtlGroupIndex .1.3.6.1.4.1.19746.1.11.2.7.1.1
vtlGroupIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.11.2.7.1.1.1
vtlGroupName DDMibTableString32TC .1.3.6.1.4.1.19746.1.11.2.7.1.1.2
vtlGroupInitiaterCount DDMibInteger32TC .1.3.6.1.4.1.19746.1.11.2.7.1.1.3
vtlGroupDeviceCount DDMibInteger32TC .1.3.6.1.4.1.19746.1.11.2.7.1.1.4
vtlGroupDeviceTable .1.3.6.1.4.1.19746.1.11.2.7.2
vtlGroupDeviceEntry vtlGroupIndexvtlGroupDeviceIndex .1.3.6.1.4.1.19746.1.11.2.7.2.1
vtlGroupDeviceIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.11.2.7.2.1.2
vtlGroupDeviceGroupName DDMibTableString256TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.3
vtlGroupDeviceDeviceName DDMibTableString256TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.4
vtlGroupDeviceLun DDMibInteger32TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.5
vtlGroupDevicePrimaryPorts DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.6
vtlGroupDeviceSecondaryPorts DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.7
vtlGroupDeviceInUsePorts DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.7.2.1.8
vtlInitiator .1.3.6.1.4.1.19746.1.11.2.8
vtlInitiatorTable .1.3.6.1.4.1.19746.1.11.2.8.1
vtlInitiatorEntry vtlInitiatorIndex .1.3.6.1.4.1.19746.1.11.2.8.1.1
vtlInitiatorIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.11.2.8.1.1.1
vtlInitiatorName DDMibTableString32TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.2
vtlInitiatorStatus DDMibTableString32TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.3
vtlInitiatorGroup DDMibTableString32TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.4
vtlInitiatorWWNN DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.5
vtlInitiatorWWPN DDMibTableString64TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.6
vtlInitiatorPort DDMibTableString32TC .1.3.6.1.4.1.19746.1.11.2.8.1.1.7
vtlStats .1.3.6.1.4.1.19746.1.11.3
vtlStatsTable .1.3.6.1.4.1.19746.1.11.3.1
vtlStatsEntry vtlStatsIndex .1.3.6.1.4.1.19746.1.11.3.1.1
vtlStatsIndex VtlStatsIndexTC .1.3.6.1.4.1.19746.1.11.3.1.1.1
vtlStatsSyncLosses VtlStatsSyncLossesTC .1.3.6.1.4.1.19746.1.11.3.1.1.10
vtlStatsSignalLosses VtlStatsSignalLossesTC .1.3.6.1.4.1.19746.1.11.3.1.1.11
vtlStatsPrimSeqProtoErrors VtlStatsPrimSeqProtoErrorsTC .1.3.6.1.4.1.19746.1.11.3.1.1.12
vtlStatsInvalidTxWords VtlStatsInvalidTxWordsTC .1.3.6.1.4.1.19746.1.11.3.1.1.13
vtlStatsInvalidCRCs VtlStatsInvalidCRCsTC .1.3.6.1.4.1.19746.1.11.3.1.1.14
vtlStatsPort VtlStatsPortTC .1.3.6.1.4.1.19746.1.11.3.1.1.2
vtlStatsConrolCommands VtlStatsConrolCommandsTC .1.3.6.1.4.1.19746.1.11.3.1.1.3
vtlStatsWriteCommands VtlStatsWriteCommandsTC .1.3.6.1.4.1.19746.1.11.3.1.1.4
vtlStatsReadCommands VtlStatsReadCommandsTC .1.3.6.1.4.1.19746.1.11.3.1.1.5
vtlStatsIn VtlStatsInTC .1.3.6.1.4.1.19746.1.11.3.1.1.6
vtlStatsOut VtlStatsOutTC .1.3.6.1.4.1.19746.1.11.3.1.1.7
vtlStatsLinkFailures VtlStatsLinkFailuresTC .1.3.6.1.4.1.19746.1.11.3.1.1.8
vtlStatsLIPCount VtlStatsLIPCountTC .1.3.6.1.4.1.19746.1.11.3.1.1.9
ddboost .1.3.6.1.4.1.19746.1.12
ddboostProperties .1.3.6.1.4.1.19746.1.12.1
ddboostStatus DDboostStatusTC .1.3.6.1.4.1.19746.1.12.1.1
ddboostUser deprecated DDboostUserTC .1.3.6.1.4.1.19746.1.12.1.2
ddboostIfGroupStatus deprecated DDMibStatusTC .1.3.6.1.4.1.19746.1.12.1.3
ddboostUserTable .1.3.6.1.4.1.19746.1.12.1.4
ddboostUserEntry ddboostUserIdx .1.3.6.1.4.1.19746.1.12.1.4.1
ddboostUserIdx DDboostStatsIndexTC .1.3.6.1.4.1.19746.1.12.1.4.1.1
ddboostUserName DDMibTableString256TC .1.3.6.1.4.1.19746.1.12.1.4.1.2
ddboostUserDefaultTenantUnit DDMibTableString256TC .1.3.6.1.4.1.19746.1.12.1.4.1.3
ddboostIfGroupTable .1.3.6.1.4.1.19746.1.12.1.5
ddboostIfGroupEntry ddboostIfGroupIdx .1.3.6.1.4.1.19746.1.12.1.5.1
ddboostIfGroupIdx DDboostStatsIndexTC .1.3.6.1.4.1.19746.1.12.1.5.1.1
ddboostIfGroupName DDMibTableString256TC .1.3.6.1.4.1.19746.1.12.1.5.1.2
ddboostIfGroupCurrentStatus DDMibStatusTC .1.3.6.1.4.1.19746.1.12.1.5.1.3
ddboostFileReplicationPerformance .1.3.6.1.4.1.19746.1.12.10
ddboostFileRepliPerfInPreCompKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.10.1
ddboostFileRepliPerfInNetworkKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.10.2
ddboostFileRepliPerfOutPreCompKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.10.3
ddboostFileRepliPerfOutNetworkKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.10.4
ddboostStats .1.3.6.1.4.1.19746.1.12.2
ddboostStatsTable .1.3.6.1.4.1.19746.1.12.2.1
ddboostStatsEntry ddboostStatsIndex .1.3.6.1.4.1.19746.1.12.2.1.1
ddboostStatsIndex DDboostStatsIndexTC .1.3.6.1.4.1.19746.1.12.2.1.1.1
ddboostStatsImageDeletesCount SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.10
ddboostStatsImageDeletesErrors SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.11
ddboostStatsPrecompBytesReceived DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.12
ddboostStatsBytesAfterFiltering DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.13
ddboostStatsBytesAfterLc DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.14
ddboostStatsNetworkBytesReceived DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.15
ddboostStatsCompressionRatio DDMibTableString32TC .1.3.6.1.4.1.19746.1.12.2.1.1.16
ddboostStatsTotalBytesReadCount DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.17
ddboostStatsTotalBytesReadErrors DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.2.1.1.18
ddboostPreCompKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.12.2.1.1.2
ddboostPostCompKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.12.2.1.1.3
ddboostNetworkKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.12.2.1.1.4
ddboostReadKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.12.2.1.1.5
ddboostStatsBackupConn SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.6
ddboostStatsRestoreConn SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.7
ddboostStatsImageCreatesCount SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.8
ddboostStatsImageCreatesErrors SNMPv2-SMICounter64 .1.3.6.1.4.1.19746.1.12.2.1.1.9
ddboostConnections .1.3.6.1.4.1.19746.1.12.3
ddboostConnectionsTable .1.3.6.1.4.1.19746.1.12.3.1
ddboostConnectionsEntry ddboostConnectionsIndex .1.3.6.1.4.1.19746.1.12.3.1.1
ddboostConnectionsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.3.1.1.1
ddboostInterface DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.3.1.1.2
ddboostifGroupMember DDMibTableEnabledTC .1.3.6.1.4.1.19746.1.12.3.1.1.3
ddboostBackupConnections DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.3.1.1.4
ddboostRestoreConnections DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.3.1.1.5
ddboostControlConnections DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.3.1.1.6
ddboostTotalConnections DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.3.1.1.7
ddboostStorageUnit .1.3.6.1.4.1.19746.1.12.4
ddboostStorageUnitTable .1.3.6.1.4.1.19746.1.12.4.1
ddboostStorageUnitEntry ddboostStorageUnitIndex .1.3.6.1.4.1.19746.1.12.4.1.1
ddboostStorageUnitIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.4.1.1.1
ddboostStorageUnitReportPhysicalSize DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.4.1.1.10
ddboostStorageUnitName DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.4.1.1.2
ddboostStorageUnitBytes DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.4.1.1.3
ddboostStorageUnitGlobalComp DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.4.1.1.4
ddboostStorageUnitLocalComp DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.4.1.1.5
ddboostStorageUnitMetaData DDMibInteger32TC .1.3.6.1.4.1.19746.1.12.4.1.1.6
ddboostStorageUnitStatus DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.4.1.1.7
ddboostStorageUnitPreComp DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.4.1.1.8
ddboostStorageUnitUser DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.4.1.1.9
ddboostFileReplicationStats .1.3.6.1.4.1.19746.1.12.5
ddboostFileReplicationStatsTable .1.3.6.1.4.1.19746.1.12.5.1
ddboostFileReplicationStatsEntry ddboostFileReplStatsIndex .1.3.6.1.4.1.19746.1.12.5.1.1
ddboostFileReplStatsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.5.1.1.1
ddboostFileReplStatsDirection DDMibTableString32TC .1.3.6.1.4.1.19746.1.12.5.1.1.2
ddboostFileReplStatsNetworkSent DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.5.1.1.3
ddboostFileReplStatsPreCompSent DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.5.1.1.4
ddboostFileReplStatsFiltered DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.5.1.1.5
ddboostFileReplStatsLowBWOpt DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.5.1.1.6
ddboostFileReplStatsLocalComp DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.5.1.1.7
ddboostFileReplStatsCompRatio DDMibTableString32TC .1.3.6.1.4.1.19746.1.12.5.1.1.8
ddboostFileReplicationHistory .1.3.6.1.4.1.19746.1.12.6
ddboostFileReplicationHistoryTable .1.3.6.1.4.1.19746.1.12.6.1
ddboostFileReplicationHistoryEntry ddboostFileReplHistoryIndex .1.3.6.1.4.1.19746.1.12.6.1.1
ddboostFileReplHistoryIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.6.1.1.1
ddboostFileReplHistoryDirection DDMibTableString32TC .1.3.6.1.4.1.19746.1.12.6.1.1.2
ddboostFileReplHistoryNetwork DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.6.1.1.3
ddboostFileReplHistoryPreComp DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.6.1.1.4
ddboostFileReplHistoryPostComp DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.6.1.1.5
ddboostFileReplHistoryLowBWOpt DDMibTableString32TC .1.3.6.1.4.1.19746.1.12.6.1.1.6
ddboostFileReplHistoryErrors DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.12.6.1.1.7
ddboostFileReplHistoryDate DDMibDateTC .1.3.6.1.4.1.19746.1.12.6.1.1.8
ddboostFileReplHistoryTime DDMibDateTC .1.3.6.1.4.1.19746.1.12.6.1.1.9
ddboostIfGroupConfig .1.3.6.1.4.1.19746.1.12.7
ddboostIfGroupConfigTable .1.3.6.1.4.1.19746.1.12.7.1
ddboostIfGroupConfigEntry ddboostIfGroupConfigIndex .1.3.6.1.4.1.19746.1.12.7.1.1
ddboostIfGroupConfigIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.7.1.1.1
ddboostIfGroupInterface DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.7.1.1.2
ddboostAccessClients .1.3.6.1.4.1.19746.1.12.8
ddboostAccessClientsTable .1.3.6.1.4.1.19746.1.12.8.1
ddboostAccessClientsEntry ddboostAccessClientsIndex .1.3.6.1.4.1.19746.1.12.8.1.1
ddboostAccessClientsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.8.1.1.1
ddboostAccessClientsName DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.8.1.1.2
ddboostAccessClientsEncryStrength DdboostAccessClientsEncryStrengthTC .1.3.6.1.4.1.19746.1.12.8.1.1.3
ddboostAccessClientsAuthMode DdboostAccessClientsAuthModeTC .1.3.6.1.4.1.19746.1.12.8.1.1.4
ddboostOptions .1.3.6.1.4.1.19746.1.12.9
ddboostOptionsTable .1.3.6.1.4.1.19746.1.12.9.1
ddboostOptionsEntry ddboostOptionsIndex .1.3.6.1.4.1.19746.1.12.9.1.1
ddboostOptionsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.12.9.1.1.1
ddboostOptionsName DDMibTableString64TC .1.3.6.1.4.1.19746.1.12.9.1.1.2
ddboostOptionsStatus DDMibStatusTC .1.3.6.1.4.1.19746.1.12.9.1.1.3
dataDomainSystem .1.3.6.1.4.1.19746.1.13
systemProperties .1.3.6.1.4.1.19746.1.13.1
systemSerialNumber SystemSerialNumberTC .1.3.6.1.4.1.19746.1.13.1.1
systemCurrentTime DDMibTimeStampTC .1.3.6.1.4.1.19746.1.13.1.2
systemVersion DDMibVersionTC .1.3.6.1.4.1.19746.1.13.1.3
systemModelNumber DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.1.4
systemTimeZoneName SystemTimeZoneNameTC .1.3.6.1.4.1.19746.1.13.1.5
sysNotes r/w SystemNotesTC .1.3.6.1.4.1.19746.1.13.1.6
systemHardware .1.3.6.1.4.1.19746.1.13.2
systemHardwareTable .1.3.6.1.4.1.19746.1.13.2.1
systemHardwareEntry systemHardwareIndex .1.3.6.1.4.1.19746.1.13.2.1.1
systemHardwareIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.2.1.1.1
systemHardwareSlot deprecated DDMibInteger32TC .1.3.6.1.4.1.19746.1.13.2.1.1.2
systemHardwareVendor DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.2.1.1.3
systemHardwareDevice DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.2.1.1.4
systemHardwarePorts DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.2.1.1.5
systemHardwareSlotName OctetString .1.3.6.1.4.1.19746.1.13.2.1.1.6
systemPorts .1.3.6.1.4.1.19746.1.13.3
systemPortsTable .1.3.6.1.4.1.19746.1.13.3.1
systemPortsEntry systemPortsIndex .1.3.6.1.4.1.19746.1.13.3.1.1
systemPortsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.3.1.1.1
systemPortsPort DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.3.1.1.2
systemPortsConnectionType DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.3.1.1.3
systemPortsLinkSpeed DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.3.1.1.4
systemPortsFirmware DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.3.1.1.5
systemPortsHardwareAddress DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.3.1.1.6
systemLicense .1.3.6.1.4.1.19746.1.13.4
systemLicenseTable .1.3.6.1.4.1.19746.1.13.4.1
systemLicenseEntry systemLicenseIndex .1.3.6.1.4.1.19746.1.13.4.1.1
systemLicenseIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.4.1.1.1
systemLicenseKey DDMibTableString256TC .1.3.6.1.4.1.19746.1.13.4.1.1.2
systemLicenseFeature DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.4.1.1.3
systemCapacityLicense .1.3.6.1.4.1.19746.1.13.4.2
systemCapacityLicenseTable .1.3.6.1.4.1.19746.1.13.4.2.1
systemCapacityLicenseEntry systemCapacityLicenseIndex .1.3.6.1.4.1.19746.1.13.4.2.1.1
systemCapacityLicenseIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.4.2.1.1.1
systemCapacityLicenseKey DDMibTableString256TC .1.3.6.1.4.1.19746.1.13.4.2.1.1.2
systemCapacityLicenseFeature DDMibTableString64TC .1.3.6.1.4.1.19746.1.13.4.2.1.1.3
systemCapacityLicenseModel DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.4.2.1.1.4
systemCapacityLicenseCapacity DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.4.2.1.1.5
systemUser .1.3.6.1.4.1.19746.1.13.5
systemUserTable .1.3.6.1.4.1.19746.1.13.5.1
systemUserEntry systemUserIndex .1.3.6.1.4.1.19746.1.13.5.1.1
systemUserIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.5.1.1.1
systemUserName DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.5.1.1.2
systemUserUID DDMibInteger32TC .1.3.6.1.4.1.19746.1.13.5.1.1.3
systemUserRole DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.1.1.4
systemUserStatus DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.1.1.5
systemActiveUserTable .1.3.6.1.4.1.19746.1.13.5.2
systemActiveUserEntry systemActiveUserIndex .1.3.6.1.4.1.19746.1.13.5.2.1
systemActiveUserIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.13.5.2.1.1
systemActiveUserName DDMibTableString128TC .1.3.6.1.4.1.19746.1.13.5.2.1.2
systemActiveUserIdleTime DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.2.1.3
systemActiveUserLoginTime DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.2.1.4
systemActiveUserLoginFrom DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.2.1.5
systemActiveUserTty DDMibTableString32TC .1.3.6.1.4.1.19746.1.13.5.2.1.6
art .1.3.6.1.4.1.19746.1.14
artConfig .1.3.6.1.4.1.19746.1.14.1
artConfigTable .1.3.6.1.4.1.19746.1.14.1.1
artConfigEntry artConfigIndex .1.3.6.1.4.1.19746.1.14.1.1.1
artConfigIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.14.1.1.1.1
artConfigStatus DDMibTableEnabledTC .1.3.6.1.4.1.19746.1.14.1.1.1.2
artConfigMigrationSchedule DDMibTableString128TC .1.3.6.1.4.1.19746.1.14.1.1.1.3
artConfigDefaultAge DDMibInteger32TC .1.3.6.1.4.1.19746.1.14.1.1.1.4
artConfigFileSystemClean DDMibTableEnabledTC .1.3.6.1.4.1.19746.1.14.1.1.1.5
artConfigCompression DDMibTableString32TC .1.3.6.1.4.1.19746.1.14.1.1.1.6
artMigrationSchedule .1.3.6.1.4.1.19746.1.14.2
artMigrationScheduleTable .1.3.6.1.4.1.19746.1.14.2.1
artMigrationScheduleEntry artMigrationScheduleIndex .1.3.6.1.4.1.19746.1.14.2.1.1
artMigrationScheduleIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.14.2.1.1.1
artMigrationScheduleSchedule DDMibTableString512TC .1.3.6.1.4.1.19746.1.14.2.1.1.2
artMigrationScheduleStatus DDMibStatusTC .1.3.6.1.4.1.19746.1.14.2.1.1.3
artMigrationPolicy .1.3.6.1.4.1.19746.1.14.3
artMigrationPolicyTable .1.3.6.1.4.1.19746.1.14.3.1
artMigrationPolicyEntry artMigrationPolicyIndex .1.3.6.1.4.1.19746.1.14.3.1.1
artMigrationPolicyIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.14.3.1.1.1
artMigrationPolicyMtreeName DDMibTableString256TC .1.3.6.1.4.1.19746.1.14.3.1.1.2
artMigrationPolicyDefaultAge DDMibInteger32TC .1.3.6.1.4.1.19746.1.14.3.1.1.3
mtree .1.3.6.1.4.1.19746.1.15
mtreeCompression .1.3.6.1.4.1.19746.1.15.1
mtreeCompressionTable .1.3.6.1.4.1.19746.1.15.1.1
mtreeCompressionEntry mtreeCompressionIndex .1.3.6.1.4.1.19746.1.15.1.1.1
mtreeCompressionIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.15.1.1.1.1
mtreeCompressionMtreePath DDMibTableString512TC .1.3.6.1.4.1.19746.1.15.1.1.1.2
mtreeCompressionPreCompGib DDMibTableSizeGibTC .1.3.6.1.4.1.19746.1.15.1.1.1.3
mtreeCompressionPostCompGib DDMibTableSizeGibTC .1.3.6.1.4.1.19746.1.15.1.1.1.4
mtreeCompressionGlobalCompFactor DDMibCompressionFactorTC .1.3.6.1.4.1.19746.1.15.1.1.1.5
mtreeCompressionLocalCompFactor DDMibCompressionFactorTC .1.3.6.1.4.1.19746.1.15.1.1.1.6
mtreeCompressionPostTotalCompFactor DDMibCompressionFactorTC .1.3.6.1.4.1.19746.1.15.1.1.1.7
mtreeCompressionTimePeriod DDMibTableString128TC .1.3.6.1.4.1.19746.1.15.1.1.1.8
mtreeList .1.3.6.1.4.1.19746.1.15.2
mtreeListTable .1.3.6.1.4.1.19746.1.15.2.1
mtreeListEntry mtreeListIndex .1.3.6.1.4.1.19746.1.15.2.1.1
mtreeListIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.15.2.1.1.1
mtreeListMtreeName DDMibTableString512TC .1.3.6.1.4.1.19746.1.15.2.1.1.2
mtreeListPreCompGib DDMibTableSizeGibTC .1.3.6.1.4.1.19746.1.15.2.1.1.3
mtreeListStatus MtreeListStatusTC .1.3.6.1.4.1.19746.1.15.2.1.1.4
mtreeRetentionLock .1.3.6.1.4.1.19746.1.15.4
mtreeRetentionLockTable .1.3.6.1.4.1.19746.1.15.4.1
mtreeRetentionLockEntry mtreeRetentionLockIndex .1.3.6.1.4.1.19746.1.15.4.1.1
mtreeRetentionLockIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.15.4.1.1.1
mtreeRetentionLockMtreeName DDMibTableString512TC .1.3.6.1.4.1.19746.1.15.4.1.1.2
mtreeRetentionLockStatus MtreeRetentionLockStatusTC .1.3.6.1.4.1.19746.1.15.4.1.1.3
mtreeRetentionLockUUID DDMibTableString32TC .1.3.6.1.4.1.19746.1.15.4.1.1.4
mtreeRetentionLockMinRetentionPeriod DDMibTableString32TC .1.3.6.1.4.1.19746.1.15.4.1.1.5
mtreeRetentionLockMaxRetentionPeriod DDMibTableString32TC .1.3.6.1.4.1.19746.1.15.4.1.1.6
storage .1.3.6.1.4.1.19746.1.16
enclosure .1.3.6.1.4.1.19746.1.17
enclosureList .1.3.6.1.4.1.19746.1.17.1
enclosureListTable .1.3.6.1.4.1.19746.1.17.1.1
enclosureListEntry enclosureListIndex .1.3.6.1.4.1.19746.1.17.1.1.1
enclosureListIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.17.1.1.1.1
enclosureListNum DDMibInteger32TC .1.3.6.1.4.1.19746.1.17.1.1.1.2
enclosureListModel DDMibTableString64TC .1.3.6.1.4.1.19746.1.17.1.1.1.3
enclosureListSerialNum DDMibTableString128TC .1.3.6.1.4.1.19746.1.17.1.1.1.4
enclosureListOemName DDMibTableString128TC .1.3.6.1.4.1.19746.1.17.1.1.1.5
enclosureListOemValue DDMibTableString128TC .1.3.6.1.4.1.19746.1.17.1.1.1.6
enclosureListCapacity DDMibTableString64TC .1.3.6.1.4.1.19746.1.17.1.1.1.7
enclosurePack .1.3.6.1.4.1.19746.1.17.2
enclosurePackTable .1.3.6.1.4.1.19746.1.17.2.1
enclosurePackEntry enclosureListIndexenclosurePackID .1.3.6.1.4.1.19746.1.17.2.1.1
enclosurePackID DDMibTableIndexTC .1.3.6.1.4.1.19746.1.17.2.1.1.1
network .1.3.6.1.4.1.19746.1.18
dns .1.3.6.1.4.1.19746.1.18.1
dnsTable .1.3.6.1.4.1.19746.1.18.1.1
dnsEntry dnsIndex .1.3.6.1.4.1.19746.1.18.1.1.1
dnsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.18.1.1.1.1
dnsServer DDMibTableString32TC .1.3.6.1.4.1.19746.1.18.1.1.1.2
searchDomains .1.3.6.1.4.1.19746.1.18.2
searchDomainsTable .1.3.6.1.4.1.19746.1.18.2.1
searchDomainsEntry searchDomainsIndex .1.3.6.1.4.1.19746.1.18.2.1.1
searchDomainsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.18.2.1.1.1
searchDomainsName DDMibTableString128TC .1.3.6.1.4.1.19746.1.18.2.1.1.2
snmpTrapHosts .1.3.6.1.4.1.19746.1.18.3
snmpTrapHostsTable .1.3.6.1.4.1.19746.1.18.3.1
snmpTrapHostsEntry snmpTrapHostsIndex .1.3.6.1.4.1.19746.1.18.3.1.1
snmpTrapHostsIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.18.3.1.1.1
snmpTrapHostsName DDMibTableString256TC .1.3.6.1.4.1.19746.1.18.3.1.1.2
snmpTrapHostsVersion DDMibTableString32TC .1.3.6.1.4.1.19746.1.18.3.1.1.3
nis .1.3.6.1.4.1.19746.1.18.4
nisDomain DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.1
nisServers DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.2
nisAdminGroups DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.3
nisUserGroups DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.4
nisBackupOperatorGroups DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.5
nisEnabled DDMibTableEnabledTC .1.3.6.1.4.1.19746.1.18.4.6
nisStatus DDMibTableString1024TC .1.3.6.1.4.1.19746.1.18.4.7
ddms .1.3.6.1.4.1.19746.1.19
managedSystem .1.3.6.1.4.1.19746.1.19.1
managedSystemTable .1.3.6.1.4.1.19746.1.19.1.1
managedSystemEntry managedSystemIndex .1.3.6.1.4.1.19746.1.19.1.1.1
managedSystemIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.19.1.1.1.1
managedSystemHostname DDMibTableString256TC .1.3.6.1.4.1.19746.1.19.1.1.1.2
managedSystemSerial DDMibTableString32TC .1.3.6.1.4.1.19746.1.19.1.1.1.3
managedSystemState DDMibTableString32TC .1.3.6.1.4.1.19746.1.19.1.1.1.4
managedSystemStatus DDMibTableString32TC .1.3.6.1.4.1.19746.1.19.1.1.1.5
managedSystemDDOSVersion DDMibTableString32TC .1.3.6.1.4.1.19746.1.19.1.1.1.6
managedSystemHDSyncTime DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.1.1.1.7
managedSystemCDSyncTime DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.1.1.1.8
taskHistory .1.3.6.1.4.1.19746.1.19.2
taskHistoryTable .1.3.6.1.4.1.19746.1.19.2.1
taskHistoryEntry taskHistoryIndex .1.3.6.1.4.1.19746.1.19.2.1.1
taskHistoryIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.19.2.1.1.1
taskHistoryUser DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.2
taskHistoryID DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.3
taskHistoryParent DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.4
taskHistoryName DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.5
taskHistoryState DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.6
taskHistoryStartTime DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.7
taskHistoryDuration DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.2.1.1.8
taskActive .1.3.6.1.4.1.19746.1.19.3
taskActiveTable .1.3.6.1.4.1.19746.1.19.3.1
taskActiveEntry taskActiveIndex .1.3.6.1.4.1.19746.1.19.3.1.1
taskActiveIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.19.3.1.1.1
taskActiveUser DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.2
taskActiveID DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.3
taskActiveParent DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.4
taskActiveName DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.5
taskActiveState DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.6
taskActiveStartTime DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.7
taskActiveDuration DDMibTableString64TC .1.3.6.1.4.1.19746.1.19.3.1.1.8
nvram .1.3.6.1.4.1.19746.1.2
nvramProperties .1.3.6.1.4.1.19746.1.2.1
nvramPropertiesTable .1.3.6.1.4.1.19746.1.2.1.1
nvramPropertiesEntry nvramPropertiesIndex .1.3.6.1.4.1.19746.1.2.1.1.1
nvramPropertiesIndex NvramIndexTC .1.3.6.1.4.1.19746.1.2.1.1.1.1
nvramMemorySize NvramMemorySizeTC .1.3.6.1.4.1.19746.1.2.1.1.1.2
nvramWindowSize NvramWindowSizeTC .1.3.6.1.4.1.19746.1.2.1.1.1.3
nvramHCMemorySize NvramHCPropertyBytesTC .1.3.6.1.4.1.19746.1.2.1.1.1.4
nvramStats .1.3.6.1.4.1.19746.1.2.2
nvramStatsTable .1.3.6.1.4.1.19746.1.2.2.1
nvramStatsEntry nvramStatsIndex .1.3.6.1.4.1.19746.1.2.2.1.1
nvramStatsIndex NvramIndexTC .1.3.6.1.4.1.19746.1.2.2.1.1.1
nvramPCIErrorCount ErrorCount .1.3.6.1.4.1.19746.1.2.2.1.1.2
nvramMemoryErrorCount ErrorCount .1.3.6.1.4.1.19746.1.2.2.1.1.3
nvramBatteries .1.3.6.1.4.1.19746.1.2.3
nvramBatteryTable .1.3.6.1.4.1.19746.1.2.3.1
nvramBatteryEntry nvramBatteriesIndexnvramBatteryIndex .1.3.6.1.4.1.19746.1.2.3.1.1
nvramBatteriesIndex NvramIndexTC .1.3.6.1.4.1.19746.1.2.3.1.1.1
nvramBatteryIndex NvramBatteryIndexTC .1.3.6.1.4.1.19746.1.2.3.1.1.2
nvramBatteryStatus NvramBatteryStatusTC .1.3.6.1.4.1.19746.1.2.3.1.1.3
nvramBatteryCharge Percentage .1.3.6.1.4.1.19746.1.2.3.1.1.4
smt .1.3.6.1.4.1.19746.1.20
smtProperties .1.3.6.1.4.1.19746.1.20.1
smtStatus SmtStatusTC .1.3.6.1.4.1.19746.1.20.1.1
tenantUnitList .1.3.6.1.4.1.19746.1.20.2
tenantUnitListTable .1.3.6.1.4.1.19746.1.20.2.1
tenantUnitListEntry tenantUnitListIdx .1.3.6.1.4.1.19746.1.20.2.1.1
tenantUnitListIdx DDMibTableIndexTC .1.3.6.1.4.1.19746.1.20.2.1.1.1
tenantUnitListNumberOfMgmtGroups DDMibInteger32TC .1.3.6.1.4.1.19746.1.20.2.1.1.10
tenantUnitListName DDMibTableString256TC .1.3.6.1.4.1.19746.1.20.2.1.1.2
tenantUnitListNumberOfMgmtUsers DDMibInteger32TC .1.3.6.1.4.1.19746.1.20.2.1.1.3
tenantUnitListNumberOfMtrees DDMibInteger32TC .1.3.6.1.4.1.19746.1.20.2.1.1.4
tenantUnitListNumberOfDdboostStus DDMibInteger32TC .1.3.6.1.4.1.19746.1.20.2.1.1.5
tenantUnitListTenantSelfServiceMode SmtStatusTC .1.3.6.1.4.1.19746.1.20.2.1.1.6
tenantUnitListParentTenantName DDMibTableString256TC .1.3.6.1.4.1.19746.1.20.2.1.1.7
tenantUnitListType DDMibTableString256TC .1.3.6.1.4.1.19746.1.20.2.1.1.8
tenantUnitListSecurityMode TenantUnitSecurityModeTC .1.3.6.1.4.1.19746.1.20.2.1.1.9
tenantUnitMgmtUserList .1.3.6.1.4.1.19746.1.20.3
tenantUnitMgmtUserListTable .1.3.6.1.4.1.19746.1.20.3.1
tenantUnitMgmtUserListEntry tenantUnitListIdxtenantUnitMgmtUserListUserName .1.3.6.1.4.1.19746.1.20.3.1.1
tenantUnitMgmtUserListUserName DDMibString96TC .1.3.6.1.4.1.19746.1.20.3.1.1.2
tenantUnitMgmtUserListUserRole TenantUnitMgmtUserListUserRoleTC .1.3.6.1.4.1.19746.1.20.3.1.1.3
tenantUnitMtreeList .1.3.6.1.4.1.19746.1.20.4
tenantUnitMtreeListTable .1.3.6.1.4.1.19746.1.20.4.1
tenantUnitMtreeListEntry tenantUnitListIdxtenantUnitMtreeListMtreeName .1.3.6.1.4.1.19746.1.20.4.1.1
tenantUnitMtreeListMtreeName DDMibString96TC .1.3.6.1.4.1.19746.1.20.4.1.1.2
tenantUnitDdboostStuList .1.3.6.1.4.1.19746.1.20.5
tenantUnitDdboostStuListTable .1.3.6.1.4.1.19746.1.20.5.1
tenantUnitDdboostStuListEntry tenantUnitListIdxtenantUnitDdboostStuListStuName .1.3.6.1.4.1.19746.1.20.5.1.1
tenantUnitDdboostStuListStuName DDMibString96TC .1.3.6.1.4.1.19746.1.20.5.1.1.2
tenantUnitAdminIpInfo .1.3.6.1.4.1.19746.1.20.6
tenantUnitAdminIpInfoTable .1.3.6.1.4.1.19746.1.20.6.1
tenantUnitAdminIpInfoEntry tenantUnitListIdxtenantUnitAdminIpInfoAddr .1.3.6.1.4.1.19746.1.20.6.1.1
tenantUnitAdminIpInfoAddr DDMibString96TC .1.3.6.1.4.1.19746.1.20.6.1.1.2
tenantUnitAdminIpInfoType DDMibString96TC .1.3.6.1.4.1.19746.1.20.6.1.1.3
tenantInfo .1.3.6.1.4.1.19746.1.20.7
tenantInfoTable .1.3.6.1.4.1.19746.1.20.7.1
tenantInfoEntry tenantInfoIdx .1.3.6.1.4.1.19746.1.20.7.1.1
tenantInfoIdx DDMibTableIndexTC .1.3.6.1.4.1.19746.1.20.7.1.1.1
tenantInfoTenantName DDMibString96TC .1.3.6.1.4.1.19746.1.20.7.1.1.2
tenantInfoTenantUnitTable .1.3.6.1.4.1.19746.1.20.7.2
tenantInfoTenantUnitEntry tenantInfoIdxtenantInfoTenantUnitName .1.3.6.1.4.1.19746.1.20.7.2.1
tenantInfoTenantUnitName DDMibString96TC .1.3.6.1.4.1.19746.1.20.7.2.1.2
tenantUnitMgmtGroupList .1.3.6.1.4.1.19746.1.20.8
tenantUnitMgmtGroupListTable .1.3.6.1.4.1.19746.1.20.8.1
tenantUnitMgmtGroupListEntry tenantUnitListIdxtenantUnitMgmtGroupListGroupName .1.3.6.1.4.1.19746.1.20.8.1.1
tenantUnitMgmtGroupListGroupName DDMibString96TC .1.3.6.1.4.1.19746.1.20.8.1.1.2
tenantUnitMgmtGroupListGroupRole TenantUnitMgmtUserListUserRoleTC .1.3.6.1.4.1.19746.1.20.8.1.1.3
tenantUnitMgmtGroupListGroupType TenantUnitMgmtGroupTypeTC .1.3.6.1.4.1.19746.1.20.8.1.1.4
quota .1.3.6.1.4.1.19746.1.21
quotaProperties .1.3.6.1.4.1.19746.1.21.1
quotaCapacityStatus DDStatusTC .1.3.6.1.4.1.19746.1.21.1.1
quotaCapacity .1.3.6.1.4.1.19746.1.21.2
quotaCapacityTable .1.3.6.1.4.1.19746.1.21.2.1
quotaCapacityEntry quotaCapacityIndex .1.3.6.1.4.1.19746.1.21.2.1.1
quotaCapacityIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.21.2.1.1.1
quotaCapacityMtreeName DDMibTableString512TC .1.3.6.1.4.1.19746.1.21.2.1.1.2
quotaCapacityPreCompMiB DDMibTableSizeMiBTC .1.3.6.1.4.1.19746.1.21.2.1.1.3
quotaCapacitySoftLimitMiB DDMibTableSizeMiBTC .1.3.6.1.4.1.19746.1.21.2.1.1.4
quotaCapacityHardLimitMiB DDMibTableSizeMiBTC .1.3.6.1.4.1.19746.1.21.2.1.1.5
quotaCapacityTenantUnit DDMibTableString512TC .1.3.6.1.4.1.19746.1.21.2.1.1.6
highAvailability .1.3.6.1.4.1.19746.1.22
highAvailabilityStatus .1.3.6.1.4.1.19746.1.22.1
haSystemStatus DDMibString96TC .1.3.6.1.4.1.19746.1.22.1.1
localNodeRole DDMibString96TC .1.3.6.1.4.1.19746.1.22.1.2
localHaState DDMibString96TC .1.3.6.1.4.1.19746.1.22.1.3
peerNodeRole DDMibString96TC .1.3.6.1.4.1.19746.1.22.1.4
peerHaState DDMibString96TC .1.3.6.1.4.1.19746.1.22.1.5
highAvailabilityConfig .1.3.6.1.4.1.19746.1.22.2
haConfiguredMode DDMibString96TC .1.3.6.1.4.1.19746.1.22.2.1
haLocalPnodeId DDMibInteger32TC .1.3.6.1.4.1.19746.1.22.2.2
scsitarget .1.3.6.1.4.1.19746.1.23
scsitargetProperties .1.3.6.1.4.1.19746.1.23.1
scsitargetAdminState DDMibString96TC .1.3.6.1.4.1.19746.1.23.1.1
scsitargetProcessState DDMibString96TC .1.3.6.1.4.1.19746.1.23.1.2
scsitargetGroup .1.3.6.1.4.1.19746.1.23.2
scsitargetGroupTable .1.3.6.1.4.1.19746.1.23.2.1
scsitargetGroupEntry scsitargetGroupIndex .1.3.6.1.4.1.19746.1.23.2.1.1
scsitargetGroupIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.2.1.1.1
scsitargetGroupName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.2.1.1.2
scsitargetGroupService DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.2.1.1.3
scsitargetGroupActiveState DDMibString96TC .1.3.6.1.4.1.19746.1.23.2.1.1.4
scsitargetGroupNumInitiators DDMibInteger32TC .1.3.6.1.4.1.19746.1.23.2.1.1.5
scsitargetGroupNumDevices DDMibInteger32TC .1.3.6.1.4.1.19746.1.23.2.1.1.6
scsitargetInitiator .1.3.6.1.4.1.19746.1.23.3
scsitargetInitiatorTable .1.3.6.1.4.1.19746.1.23.3.1
scsitargetInitiatorEntry scsitargetInitiatorIndex .1.3.6.1.4.1.19746.1.23.3.1.1
scsitargetInitiatorIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.3.1.1.1
scsitargetInitiatorFcSymbolicPortName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.10
scsitargetInitiatorName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.2
scsitargetInitiatorSystemAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.3
scsitargetInitiatorGroup DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.4
scsitargetInitiatorService DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.5
scsitargetInitiatorAddressMethod DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.6
scsitargetInitiatorTransport DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.7
scsitargetInitiatorFcWwpn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.8
scsitargetInitiatorFcWwnn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.1.1.9
scsitargetInitiatorEndpTable .1.3.6.1.4.1.19746.1.23.3.2
scsitargetInitiatorEndpEntry scsitargetInitiatorEndpIndex .1.3.6.1.4.1.19746.1.23.3.2.1
scsitargetInitiatorEndpIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.3.2.1.1
scsitargetInitiatorEndpInitiator DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.2.1.2
scsitargetInitiatorEndpEndpoint DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.3.2.1.3
scsitargetInitiatorEndpStatus DDMibString96TC .1.3.6.1.4.1.19746.1.23.3.2.1.4
scsitargetEndpoint .1.3.6.1.4.1.19746.1.23.4
scsitargetEndpointTable .1.3.6.1.4.1.19746.1.23.4.1
scsitargetEndpointEntry scsitargetEndpointIndex .1.3.6.1.4.1.19746.1.23.4.1.1
scsitargetEndpointIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.4.1.1.1
scsitargetEndpointFcWwpn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.10
scsitargetEndpointName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.2
scsitargetEndpointCurrentSystemAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.3
scsitargetEndpointPrimarySystemAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.4
scsitargetEndpointSecondarySystemAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.5
scsitargetEndpointEnabled DDStatusTC .1.3.6.1.4.1.19746.1.23.4.1.1.6
scsitargetEndpointStatus DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.7
scsitargetEndpointTransport DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.8
scsitargetEndpointFcWwnn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.4.1.1.9
scsitargetPort .1.3.6.1.4.1.19746.1.23.5
scsitargetPortTable .1.3.6.1.4.1.19746.1.23.5.1
scsitargetPortEntry scsitargetPortIndex .1.3.6.1.4.1.19746.1.23.5.1.1
scsitargetPortIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.5.1.1.1
scsitargetPortFirmware DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.10
scsitargetPortFcBaseWwnn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.11
scsitargetPortFcBaseWwpn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.12
scsitargetPortFcCurrentWwnn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.13
scsitargetPortFcCurrentWwpn DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.14
scsitargetPortFcp2Retry DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.15
scsitargetPortConnectionType DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.16
scsitargetPortLinkSpeed DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.17
scsitargetPortFcTopology DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.18
scsitargetPortSystemAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.2
scsitargetPortEnabled DDStatusTC .1.3.6.1.4.1.19746.1.23.5.1.1.3
scsitargetPortStatus DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.4
scsitargetPortTransport DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.5
scsitargetPortOperationalStatus DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.6
scsitargetPortFcNpiv DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.7
scsitargetPortPortId DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.8
scsitargetPortModel DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.1.1.9
scsitargetPortEndpTable .1.3.6.1.4.1.19746.1.23.5.2
scsitargetPortEndpEntry scsitargetPortEndpIndex .1.3.6.1.4.1.19746.1.23.5.2.1
scsitargetPortEndpIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.5.2.1.1
scsitargetPortEndpPort DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.2.1.2
scsitargetPortEndpEndpoint DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.2.1.3
scsitargetPortEndpEnabled DDStatusTC .1.3.6.1.4.1.19746.1.23.5.2.1.4
scsitargetPortEndpStatus DDMibString96TC .1.3.6.1.4.1.19746.1.23.5.2.1.5
scsitargetPortEndpCurrentInstance DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.5.2.1.6
scsitargetDevice .1.3.6.1.4.1.19746.1.23.6
scsitargetDeviceTable .1.3.6.1.4.1.19746.1.23.6.1
scsitargetDeviceEntry scsitargetDeviceIndex .1.3.6.1.4.1.19746.1.23.6.1.1
scsitargetDeviceIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.6.1.1.1
scsitargetDeviceName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.1.1.2
scsitargetDeviceService DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.1.1.3
scsitargetDeviceActiveState DDMibString96TC .1.3.6.1.4.1.19746.1.23.6.1.1.4
scsitargetDeviceAddress DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.1.1.5
scsitargetDeviceGrpTable .1.3.6.1.4.1.19746.1.23.6.2
scsitargetDeviceGrpEntry scsitargetDeviceGrpIndex .1.3.6.1.4.1.19746.1.23.6.2.1
scsitargetDeviceGrpIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.23.6.2.1.1
scsitargetDeviceGrpDevice DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.2
scsitargetDeviceGrpGroupName DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.3
scsitargetDeviceGrpLun DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.4
scsitargetDeviceGrpPrimaryEndpoints DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.5
scsitargetDeviceGrpSecondaryEndpoints DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.6
scsitargetDeviceGrpInUseEndpoints DDMibTableString512TC .1.3.6.1.4.1.19746.1.23.6.2.1.7
fileSystem .1.3.6.1.4.1.19746.1.3
fileSystemProperties ETHERNET-MIBlocEthAlarm .1.3.6.1.4.1.19746.1.3.1
fileSystemStatus FileSystemStatusTC .1.3.6.1.4.1.19746.1.3.1.1
fileSystemVirtualSpace FileSystemSpaceUnitTC .1.3.6.1.4.1.19746.1.3.1.2
fileSystemUpTime DDMibTimeStampTC .1.3.6.1.4.1.19746.1.3.1.3
fileSystemStatusMessage DDMibTableString256TC .1.3.6.1.4.1.19746.1.3.1.4
fileSystemSpace .1.3.6.1.4.1.19746.1.3.2
fileSystemSpaceTable .1.3.6.1.4.1.19746.1.3.2.1
fileSystemSpaceEntry fileSystemResourceIndex .1.3.6.1.4.1.19746.1.3.2.1.1
fileSystemResourceIndex FileSystemResourceIndexTC .1.3.6.1.4.1.19746.1.3.2.1.1.1
fileSystemResourceTrapIndex FileSystemResourceIndexTC .1.3.6.1.4.1.19746.1.3.2.1.1.2
fileSystemResourceName FileSystemResourceNameTC .1.3.6.1.4.1.19746.1.3.2.1.1.3
fileSystemSpaceSize FileSystemSpaceUnitTC .1.3.6.1.4.1.19746.1.3.2.1.1.4
fileSystemSpaceUsed FileSystemSpaceUnitTC .1.3.6.1.4.1.19746.1.3.2.1.1.5
fileSystemSpaceAvail FileSystemSpaceUnitTC .1.3.6.1.4.1.19746.1.3.2.1.1.6
fileSystemPercentUsed Percentage .1.3.6.1.4.1.19746.1.3.2.1.1.7
fileSystemSpaceCleanable FileSystemSpaceUnitTC .1.3.6.1.4.1.19746.1.3.2.1.1.8
fileSystemResourceTier DDMibTableString128TC .1.3.6.1.4.1.19746.1.3.2.1.1.9
fileSystemCompression .1.3.6.1.4.1.19746.1.3.3
fileSystemCompressionTable .1.3.6.1.4.1.19746.1.3.3.1
fileSystemCompressionEntry fileSystemCompressionIndex .1.3.6.1.4.1.19746.1.3.3.1.1
fileSystemCompressionIndex FileSystemResourceIndexTC .1.3.6.1.4.1.19746.1.3.3.1.1.1
fileSystemReductionPercent deprecated Percentage .1.3.6.1.4.1.19746.1.3.3.1.1.10
fileSystemReductionPercent1 PercentageStr .1.3.6.1.4.1.19746.1.3.3.1.1.11
fileSystemCompressionPeriod FileSystemCompressionPeriodTC .1.3.6.1.4.1.19746.1.3.3.1.1.2
fileSystemCompressionStartTime DateTC .1.3.6.1.4.1.19746.1.3.3.1.1.3
fileSystemCompressionEndTime DateTC .1.3.6.1.4.1.19746.1.3.3.1.1.4
fileSystemPreCompressionSize FileSystemCompressionSizeTC .1.3.6.1.4.1.19746.1.3.3.1.1.5
fileSystemPostCompressionSize FileSystemCompressionSizeTC .1.3.6.1.4.1.19746.1.3.3.1.1.6
fileSystemGlobalCompressionFactor FileSystemCompressionFactorTC .1.3.6.1.4.1.19746.1.3.3.1.1.7
fileSystemLocalCompressionFactor FileSystemCompressionFactorTC .1.3.6.1.4.1.19746.1.3.3.1.1.8
fileSystemTotalCompressionFactor FileSystemCompressionFactorTC .1.3.6.1.4.1.19746.1.3.3.1.1.9
fileSystemOptions ETHERNET-MIBremEthAlarm .1.3.6.1.4.1.19746.1.3.4
fileSystemOptionsTable .1.3.6.1.4.1.19746.1.3.4.1
fileSystemOptionsEntry fileSystemOptionsIndex .1.3.6.1.4.1.19746.1.3.4.1.1
fileSystemOptionsIndex FileSystemOptionsIndexTC .1.3.6.1.4.1.19746.1.3.4.1.1.1
fileSystemOptionsName FileSystemOptionsNameTC .1.3.6.1.4.1.19746.1.3.4.1.1.2
fileSystemOptionsValue FileSystemOptionsValueTC .1.3.6.1.4.1.19746.1.3.4.1.1.3
fileSystemClean .1.3.6.1.4.1.19746.1.3.5
fileSystemCleanTable .1.3.6.1.4.1.19746.1.3.5.1
fileSystemCleanEntry fileSystemCleanIndex .1.3.6.1.4.1.19746.1.3.5.1.1
fileSystemCleanIndex FileSystemCleanIndexTC .1.3.6.1.4.1.19746.1.3.5.1.1.1
fileSystemCleanStatus FileSystemCleanStatusTC .1.3.6.1.4.1.19746.1.3.5.1.1.2
fileSystemCleanSchedule FileSystemCleanScheduleTC .1.3.6.1.4.1.19746.1.3.5.1.1.3
fileSystemCleanThrottle FileSystemCleanThrottleTC .1.3.6.1.4.1.19746.1.3.5.1.1.4
fileSystemArchiveUnit .1.3.6.1.4.1.19746.1.3.6
fileSystemArchiveUnitTable .1.3.6.1.4.1.19746.1.3.6.1
fileSystemArchiveUnitEntry fileSystemArchiveUnitIndex .1.3.6.1.4.1.19746.1.3.6.1.1
fileSystemArchiveUnitIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.3.6.1.1.1
fileSystemArchiveUnitName DDMibTableString256TC .1.3.6.1.4.1.19746.1.3.6.1.1.2
fileSystemArchiveUnitState FileSystemArchiveUnitStateTC .1.3.6.1.4.1.19746.1.3.6.1.1.3
fileSystemArchiveUnitStatus FileSystemArchiveUnitStatusTC .1.3.6.1.4.1.19746.1.3.6.1.1.4
fileSystemArchiveUnitStartTime DDMibTimeStampTC .1.3.6.1.4.1.19746.1.3.6.1.1.5
fileSystemArchiveUnitEndTime DDMibTimeStampTC .1.3.6.1.4.1.19746.1.3.6.1.1.6
fileSystemArchiveUnitSize DDMibTableSizeGibTC .1.3.6.1.4.1.19746.1.3.6.1.1.7
fileSystemArchiveUnitDiskGroups DDMibTableString1024TC .1.3.6.1.4.1.19746.1.3.6.1.1.8
alerts .1.3.6.1.4.1.19746.1.4
currentAlerts .1.3.6.1.4.1.19746.1.4.1
currentAlertTable .1.3.6.1.4.1.19746.1.4.1.1
currentAlertEntry currentAlertIndex .1.3.6.1.4.1.19746.1.4.1.1.1
currentAlertIndex AlertIndexTC .1.3.6.1.4.1.19746.1.4.1.1.1.1
currentAlertTimestamp AlertTimestampTC .1.3.6.1.4.1.19746.1.4.1.1.1.2
currentAlertDescription AlertDescriptionTC .1.3.6.1.4.1.19746.1.4.1.1.1.3
currentAlertSeverity DDMibAlertSeverityTC .1.3.6.1.4.1.19746.1.4.1.1.1.4
currentAlertID DDMibTableString32TC .1.3.6.1.4.1.19746.1.4.1.1.1.5
alertHistory .1.3.6.1.4.1.19746.1.4.2
alertHistoryTable .1.3.6.1.4.1.19746.1.4.2.1
alertHistoryEntry alertHistoryIndex .1.3.6.1.4.1.19746.1.4.2.1.1
alertHistoryIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.4.2.1.1.1
alertHistoryTimestamp DDMibTimeStampTC .1.3.6.1.4.1.19746.1.4.2.1.1.2
alertHistoryDescription DDMibTableString256TC .1.3.6.1.4.1.19746.1.4.2.1.1.3
alertHistorySeverity DDMibAlertSeverityTC .1.3.6.1.4.1.19746.1.4.2.1.1.4
alertHistoryStatus DDMibTableString64TC .1.3.6.1.4.1.19746.1.4.2.1.1.5
alertInfo .1.3.6.1.4.1.19746.1.4.3
alertInfoTable .1.3.6.1.4.1.19746.1.4.3.1
alertInfoEntry alertInfoIndex .1.3.6.1.4.1.19746.1.4.3.1.1
alertInfoIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.4.3.1.1.1
alertInfoDescription DDMibTableString256TC .1.3.6.1.4.1.19746.1.4.3.1.1.2
statistics .1.3.6.1.4.1.19746.1.5
systemStats .1.3.6.1.4.1.19746.1.5.1
systemStatsTable .1.3.6.1.4.1.19746.1.5.1.1
systemStatsEntry systemStatsIndex .1.3.6.1.4.1.19746.1.5.1.1.1
systemStatsIndex SystemStatsIndexTC .1.3.6.1.4.1.19746.1.5.1.1.1.1
diskReadKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.10
diskWriteKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.11
diskBusyPercentage Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.12
nvramReadKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.13
nvramWriteKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.14
replInKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.15
replOutKBytesPerSecond KBytesPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.16
cpuAvgPercentageBusy Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.2
cpuMaxPercentageBusy Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.3
nfsOpsPerSecond OpsPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.4
nfsIdlePercentage Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.5
nfsProcPercentage Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.6
nfsSendPercentage Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.7
nfsReceivePercentage Percentage .1.3.6.1.4.1.19746.1.5.1.1.1.8
cifsOpsPerSecond OpsPerSecond .1.3.6.1.4.1.19746.1.5.1.1.1.9
diskStorage .1.3.6.1.4.1.19746.1.6
diskProperties .1.3.6.1.4.1.19746.1.6.1
diskPropertiesTable .1.3.6.1.4.1.19746.1.6.1.1
diskPropertiesEntry diskPropEnclosureIDdiskPropIndex .1.3.6.1.4.1.19746.1.6.1.1.1
diskPropEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.6.1.1.1.1
diskPropIndex DiskIndexTC .1.3.6.1.4.1.19746.1.6.1.1.1.2
diskPropTrapIndex DiskIndexTC .1.3.6.1.4.1.19746.1.6.1.1.1.3
diskModel DiskModelTC .1.3.6.1.4.1.19746.1.6.1.1.1.4
diskFirmwareVersion DiskFirmwareVersionTC .1.3.6.1.4.1.19746.1.6.1.1.1.5
diskSerialNumber DiskSerialNumberTC .1.3.6.1.4.1.19746.1.6.1.1.1.6
diskCapacity DiskCapacityTC .1.3.6.1.4.1.19746.1.6.1.1.1.7
diskPropState DiskStateTC .1.3.6.1.4.1.19746.1.6.1.1.1.8
diskPack DiskPackTC .1.3.6.1.4.1.19746.1.6.1.1.1.9
diskPerformance .1.3.6.1.4.1.19746.1.6.2
diskPerformanceTable .1.3.6.1.4.1.19746.1.6.2.1
diskPerformanceEntry diskPerfEnclosureIDdiskPerfIndex .1.3.6.1.4.1.19746.1.6.2.1.1
diskPerfEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.6.2.1.1.1
diskPerfIndex DiskIndexTC .1.3.6.1.4.1.19746.1.6.2.1.1.2
diskSectorsRead DiskSectorsPerSecondTC .1.3.6.1.4.1.19746.1.6.2.1.1.3
diskSectorsWritten DiskSectorsPerSecondTC .1.3.6.1.4.1.19746.1.6.2.1.1.4
diskTotalKBytes KBytesPerSecond .1.3.6.1.4.1.19746.1.6.2.1.1.5
diskBusy Percentage .1.3.6.1.4.1.19746.1.6.2.1.1.6
diskPerfState DiskStateTC .1.3.6.1.4.1.19746.1.6.2.1.1.7
diskReliability .1.3.6.1.4.1.19746.1.6.3
diskReliabilityTable .1.3.6.1.4.1.19746.1.6.3.1
diskReliabilityEntry diskErrEnclosureIDdiskErrIndex .1.3.6.1.4.1.19746.1.6.3.1.1
diskErrEnclosureID EnclosureID .1.3.6.1.4.1.19746.1.6.3.1.1.1
diskSoftEccCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.10
diskCrcErrCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.11
diskProbationalCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.12
diskReallocCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.13
diskErrState DiskStateTC .1.3.6.1.4.1.19746.1.6.3.1.1.14
diskErrIndex DiskIndexTC .1.3.6.1.4.1.19746.1.6.3.1.1.2
diskErrTrapIndex DiskIndexTC .1.3.6.1.4.1.19746.1.6.3.1.1.3
diskTemperature Temperature .1.3.6.1.4.1.19746.1.6.3.1.1.4
diskTimeoutCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.5
diskReadFailCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.6
diskWriteFailCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.7
diskMiscFailCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.8
diskOffTrackErrCount ErrorCount .1.3.6.1.4.1.19746.1.6.3.1.1.9
replication .1.3.6.1.4.1.19746.1.8
replicationInfo .1.3.6.1.4.1.19746.1.8.1
replicationInfoTable .1.3.6.1.4.1.19746.1.8.1.1
replicationInfoEntry replContext .1.3.6.1.4.1.19746.1.8.1.1.1
replContext ReplicationContextTC .1.3.6.1.4.1.19746.1.8.1.1.1.1
replPostCompBytesSent ReplicationTrafficTC .1.3.6.1.4.1.19746.1.8.1.1.1.10
replPreCompBytesRemaining ReplicationTrafficTC .1.3.6.1.4.1.19746.1.8.1.1.1.11
replPostCompBytesReceived ReplicationTrafficTC .1.3.6.1.4.1.19746.1.8.1.1.1.12
replThrottle ReplicationThrottleTC .1.3.6.1.4.1.19746.1.8.1.1.1.13
replSyncedAsOfTime ReplicationSyncedTimeTC .1.3.6.1.4.1.19746.1.8.1.1.1.14
replTrapContext ReplicationContextTC .1.3.6.1.4.1.19746.1.8.1.1.1.2
replState ReplicationStateTC .1.3.6.1.4.1.19746.1.8.1.1.1.3
replStatus ReplicationStatusTC .1.3.6.1.4.1.19746.1.8.1.1.1.4
replFileSysStatus FileSystemStatusTC .1.3.6.1.4.1.19746.1.8.1.1.1.5
replConnTime ReplicationConnectTimeTC .1.3.6.1.4.1.19746.1.8.1.1.1.6
replSource ReplicationPathTC .1.3.6.1.4.1.19746.1.8.1.1.1.7
replDestination ReplicationPathTC .1.3.6.1.4.1.19746.1.8.1.1.1.8
replPreCompBytesSent ReplicationTrafficTC .1.3.6.1.4.1.19746.1.8.1.1.1.9
replicationConfig .1.3.6.1.4.1.19746.1.8.2
replicationConfigTable .1.3.6.1.4.1.19746.1.8.2.1
replicationConfigEntry replConfigIndex .1.3.6.1.4.1.19746.1.8.2.1.1
replConfigIndex ReplicationConfigIndexTC .1.3.6.1.4.1.19746.1.8.2.1.1.1
replConfigContextId ReplicationConfigContextIdTC .1.3.6.1.4.1.19746.1.8.2.1.1.2
replConfigSource ReplicationConfigSourceTC .1.3.6.1.4.1.19746.1.8.2.1.1.3
replConfigDest ReplicationConfigDestTC .1.3.6.1.4.1.19746.1.8.2.1.1.4
replConfigConnHost ReplicationConfigConnHostTC .1.3.6.1.4.1.19746.1.8.2.1.1.5
replConfigConnPort ReplicationConfigConnPortTC .1.3.6.1.4.1.19746.1.8.2.1.1.6
replConfigLowBWOptim ReplicationConfigLowBWOptimTC .1.3.6.1.4.1.19746.1.8.2.1.1.7
replConfigEnabled ReplicationConfigEnabledTC .1.3.6.1.4.1.19746.1.8.2.1.1.8
replConfigTenantUnit DDMibString96TC .1.3.6.1.4.1.19746.1.8.2.1.1.9
replicationHistory .1.3.6.1.4.1.19746.1.8.3
replicationHistoryTable .1.3.6.1.4.1.19746.1.8.3.1
replicationHistoryEntry replHistoryContext .1.3.6.1.4.1.19746.1.8.3.1.1
replHistoryContext DDMibTableIndexTC .1.3.6.1.4.1.19746.1.8.3.1.1.1
replHistoryBytesNetwork DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.10
replHistorySyncedAsOfTime DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.3.1.1.11
replHistoryDate DDMibDateTC .1.3.6.1.4.1.19746.1.8.3.1.1.2
replHistoryTime DDMibTimeStampTC .1.3.6.1.4.1.19746.1.8.3.1.1.3
replHistoryPreCompWritten DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.4
replHistoryPreCompRemaining DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.5
replHistoryPreCompressed DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.6
replHistoryPostFiltered DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.7
replHistoryPostLowBwOptim DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.8
replHistoryPostLocalComp DDMibTrafficBytesTC .1.3.6.1.4.1.19746.1.8.3.1.1.9
replicationPerformance .1.3.6.1.4.1.19746.1.8.4
replicationPerformanceTable .1.3.6.1.4.1.19746.1.8.4.1
replicationPerformanceEntry replContext .1.3.6.1.4.1.19746.1.8.4.1.1
replPerformancePreCompKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.1
replPerformanceNetworkKBPerSec DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.2
replPerformanceStreams DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.3
replPerformanceBusyReading DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.4
replPerformanceBusyMeta DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.5
replPerformanceWaitingDest DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.6
replPerformanceWaitingNetwork DDMibInteger32TC .1.3.6.1.4.1.19746.1.8.4.1.1.7
nfs .1.3.6.1.4.1.19746.1.9
nfsProperties .1.3.6.1.4.1.19746.1.9.1
nfsStatus NfsStatusTC .1.3.6.1.4.1.19746.1.9.1.1
nfsClient .1.3.6.1.4.1.19746.1.9.2
nfsClientTable .1.3.6.1.4.1.19746.1.9.2.1
nfsClientEntry nfsClientIndex .1.3.6.1.4.1.19746.1.9.2.1.1
nfsClientIndex NfsClientIndexTC .1.3.6.1.4.1.19746.1.9.2.1.1.1
nfsClientPath NfsClientPathTC .1.3.6.1.4.1.19746.1.9.2.1.1.2
nfsClientClients NfsClientClientsTC .1.3.6.1.4.1.19746.1.9.2.1.1.3
nfsClientOptions NfsClientOptionsTC .1.3.6.1.4.1.19746.1.9.2.1.1.4
nfsStats .1.3.6.1.4.1.19746.1.9.3
nfsStatsTable .1.3.6.1.4.1.19746.1.9.3.1
nfsStatsEntry nfsStatsIndex .1.3.6.1.4.1.19746.1.9.3.1.1
nfsStatsIndex NfsStatsIndexTC .1.3.6.1.4.1.19746.1.9.3.1.1.1
nfsStatsExportPoint NfsStatsExportPointTC .1.3.6.1.4.1.19746.1.9.3.1.1.2
nfsStatsFilesystemType NfsStatsFilesystemTypeTC .1.3.6.1.4.1.19746.1.9.3.1.1.3
nfsStatsCacheEntry NfsStatsCacheEntryTC .1.3.6.1.4.1.19746.1.9.3.1.1.4
nfsStatsFileHandleLookup NfsStatsFileHandleLookupTC .1.3.6.1.4.1.19746.1.9.3.1.1.5
nfsStatsMaxCacheSize NfsStatsMaxCacheSizeTC .1.3.6.1.4.1.19746.1.9.3.1.1.6
nfsStatsCurrentOpenStreams NfsStatsCurrentOpenStreamsTC .1.3.6.1.4.1.19746.1.9.3.1.1.7
nfsActive .1.3.6.1.4.1.19746.1.9.4
nfsActiveTable .1.3.6.1.4.1.19746.1.9.4.1
nfsActiveEntry nfsActiveIndex .1.3.6.1.4.1.19746.1.9.4.1.1
nfsActiveIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.9.4.1.1.1
nfsActivePath DDMibTableString1024TC .1.3.6.1.4.1.19746.1.9.4.1.1.2
nfsActiveClients DDMibTableString1024TC .1.3.6.1.4.1.19746.1.9.4.1.1.3
nfsPort .1.3.6.1.4.1.19746.1.9.5
nfsPortTable .1.3.6.1.4.1.19746.1.9.5.1
nfsPortEntry nfsPortIndex .1.3.6.1.4.1.19746.1.9.5.1.1
nfsPortIndex DDMibTableIndexTC .1.3.6.1.4.1.19746.1.9.5.1.1.1
nfsPortService DDMibTableString32TC .1.3.6.1.4.1.19746.1.9.5.1.1.2
nfsPortPort DDMibTableString32TC .1.3.6.1.4.1.19746.1.9.5.1.1.3
dataDomainMibNotifications .1.3.6.1.4.1.19746.2
dataDomainMibTraps .1.3.6.1.4.1.19746.2.0
dataDomainMibProducts .1.3.6.1.4.1.19746.3
restorer .1.3.6.1.4.1.19746.3.1
unknown .1.3.6.1.4.1.19746.3.1.0
dd200 .1.3.6.1.4.1.19746.3.1.1
dd580 .1.3.6.1.4.1.19746.3.1.10
dd580g .1.3.6.1.4.1.19746.3.1.11
dd565 .1.3.6.1.4.1.19746.3.1.12
dd530 .1.3.6.1.4.1.19746.3.1.13
dd510 .1.3.6.1.4.1.19746.3.1.14
dd120 .1.3.6.1.4.1.19746.3.1.15
dd690 .1.3.6.1.4.1.19746.3.1.16
dd690g .1.3.6.1.4.1.19746.3.1.17
dd660 .1.3.6.1.4.1.19746.3.1.18
dd880 .1.3.6.1.4.1.19746.3.1.19
dd200Proto .1.3.6.1.4.1.19746.3.1.2
dd880g .1.3.6.1.4.1.19746.3.1.20
dd610 .1.3.6.1.4.1.19746.3.1.21
dd630 .1.3.6.1.4.1.19746.3.1.22
dd140 .1.3.6.1.4.1.19746.3.1.23
dd670 .1.3.6.1.4.1.19746.3.1.24
dd860 .1.3.6.1.4.1.19746.3.1.25
dd860g .1.3.6.1.4.1.19746.3.1.26
dd890 .1.3.6.1.4.1.19746.3.1.27
dd640 .1.3.6.1.4.1.19746.3.1.28
dd620 .1.3.6.1.4.1.19746.3.1.29
dd410 .1.3.6.1.4.1.19746.3.1.3
dd160 .1.3.6.1.4.1.19746.3.1.30
ddintrepid .1.3.6.1.4.1.19746.3.1.31
dd4500 .1.3.6.1.4.1.19746.3.1.32
dd7200 .1.3.6.1.4.1.19746.3.1.33
ddve .1.3.6.1.4.1.19746.3.1.34
dd990 .1.3.6.1.4.1.19746.3.1.35
dd2500 .1.3.6.1.4.1.19746.3.1.36
dd4200 .1.3.6.1.4.1.19746.3.1.37
ddkoalam1 .1.3.6.1.4.1.19746.3.1.38
apollo .1.3.6.1.4.1.19746.3.1.39
dd430 .1.3.6.1.4.1.19746.3.1.4
dd460 .1.3.6.1.4.1.19746.3.1.5
dd400g .1.3.6.1.4.1.19746.3.1.6
dd460g .1.3.6.1.4.1.19746.3.1.7
dd560 .1.3.6.1.4.1.19746.3.1.8
dd560g .1.3.6.1.4.1.19746.3.1.9
unset .1.3.6.1.4.1.19746.3.1.9999
Notifications / Traps (244)
NameOIDDescription
powerSupplyFailedAlarm .1.3.6.1.4.1.19746.2.0.1 
Meaning: Power Supply failed
What to do: replace the power supply
fileSpaceWarningAlarm
fileSystemResourceName
.1.3.6.1.4.1.19746.2.0.10 
Meaning: A File System Resource space is 90% utilized.  The index value of the alarm indicates 
the file system index that may be looked up in the fileSystem table 'fileSystemSpace' 
for more information about the actual FS that is getting full. 
What to do: Delete unneeded files, such as old log files, support bundles, core files,
upgrade rpm files stored in the /ddvar file system.  Consider upgrading the hardware or adding
shelves to high-end units.  Reducing the retention times for backup data can also help. When 
files are deleted from outside of the /ddvar space, filesys clean will have to be done before 
the space is recovered.
unsupportedEnclosurePSU
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10000 
Description: 
A power supply has been detected in an enclosure which does not provide complete environmental information. 
This will not affect normal operations but should be replaced as soon as convenient.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
unsupportedPowerSupply
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10001 
Description: 
The installed power supply is an unsupported model.
The system may exhibit unexpected behavior.
          
Action: 
Replace the power supply with a supported model.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
openFanDrawer
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10002 
Description: 
Fan drawer is not closed securely.
Failure to secure the fan drawer may allow the system to overheat and shut down.
          
Action: 
Close and secure the fan drawer.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
memoryRiserFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10003 
Description: 
A critical failure has been detected in a memory riser.
Memory attached to this riser may disappear from the system inventory.
The system may exhibit unexpected behavior.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to replace the memory riser.
pCILinkDegraded
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10004 
Description: 
The system has detected that PCI communication speed is degraded.
This will not cause the system to fail but may impact performance of affected components.
          
Action: 
Reboot the system.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
invalidHardwareCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10005 
Description: 
During device inventory verification, the system found missing or invalid hardware, or devices installed in the wrong location. 
The filesystem cannot be enabled with the current hardware configuration.
          
Action: 
View enclosure misconfiguration to determine the problem.
For assistance, contact your contracted support provider or visit us online at https://support.emc.com.
invalidHardwareWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10006 
Description: 
During device inventory verification, the system found missing or invalid hardware, or devices installed in the wrong location. 
Some components may not operate as expected.
          
Action: 
View enclosure misconfiguration to determine the problem.
For assistance, contact your contracted support provider or visit us online at https://support.emc.com.
correctableErrorWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10007 
Description: 
The system has detected excessive correctable errors on a component that may indicate a hardware failure.
          
Action: 
 Contact your contracted support provider or visit us online at https://support.emc.com.
spuriousInterruptDisabled
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10008 
Description: 
Excessive spurious hardware messages have been detected that may indicate a hardware failure.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
corruptEncryptionKeys
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10009 
Description: 
File system was locked as the encryption keys cannot not be validated. One or more 
encryption keys could be corrupt.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
duplicateVTLPoolNames
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10010 
Description: 
VTL directory pool and a VTL mtree pool have been detected with the same name.
Viewing pool information will only retrieve tapes from the mtree pool. Tapes in the
directory pool will not be visible to DataDomain system administration interfaces.
Backups and restores using the directory pool will operate normally.
          
Action: 
Rename one of the pools to make the name unique. The duplicate pool name may have been created as
part of a replication pair.If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
generalHardwareFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10011 
Description: 
A critical failure has been detected in one or more chassis components.
The system may exhibit unexpected behavior.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
iOModuleMacFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10013 
Description: 
A Mac fault has been detected with an I/O module and it will not function correctly.
          
Action: 
The I/O module must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
storageMigrationCannotResume
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10500 
Description: 
The system has detected a condition which prevented the storage
migration from continuing and has suspended the data copy phase.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
storageMigrationCopyComplete
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10501 
Description:                                                                                                                                                                         
All data has been moved from old enclosures to the new enclosures.
Storage migration must be finalized to decommission old enclosures and
add new capacity to the file system.
          
Action:  
Finalize the storage migration.
storageMigrationUserSuspend
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10502 
Description: 
An administrator has suspended the data copy phase of storage migration.
Data copy cannot proceed until it is manually resumed.
          
Action: 
Resume the storage migration.
cMTaskEnded
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10503 
Description: 
A long running task has ended.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
physicalCapacityMeasurementTasksLost
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10504 
Description: 
File system has been disabled either by a failure or user action.
Physical-capacity-measurement samples for these tasks are no longer available.
          
Action: 
Restart physical-capacity-measurement sample tasks that have not completed.
physicalCapacityMeasurementTasksLostMTree
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10505 
Description: 
MTree replication was broken or resynced causing one or more physical-capacity-measurement sample tasks to be cancelled.
Physical-capacity-measurement samples for these tasks are no longer available.
          
Action: 
Restart physical-capacity-measurement sample tasks that have not completed for this MTree.
physicalCapacityMeasurementScheduleFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10506 
Description: 
A physical-capacity-measurement sample task that was scheduled to run was unable to start due to an error.
Some or all of the physical-capacity-measurement samples for these tasks are not available.
          
Action: 
Review scheduled physical-capacity-measurement sample task errors to determine the reason for the failure.
Resubmit failed tasks if needed.
historicalDatabaseFailoverError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10507 
Description: 
Historical database failover failed.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to help debug the problem.
hAdegraded
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10508 
Description: 
A condition has been detected causing the configured HA system to be degraded.
Any failover attempt will not succeed.
          
Action: 
Display the HA detailed status to determine the failed component.
Repairing the failed component can return the HA system to available state.
upgradeInProgress
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10509 
Description: 
DD OS upgrade is in progress.
The system will not be available for backup and restore operations.
The alert will be cleared after the upgrade operation is complete.
          
Action: 
Allow the upgrade operation to complete. If the upgrade takes longer than usual, contact your contracted support provider or visit us online at https://support.emc.com
hAofflineErrors
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10510 
Description: 
Critical system errors have been detected causing the configured HA system to be in offline state.
Access to system services may be unavailable.
          
Action: 
Review exisiting alerts.
Fixing issues identified by these alerts may resolve this alert.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
suspendedMReplMissingUnits
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10511 
Description: 
Mtree replication on this context cannot continue until all archive units used by this Mtree are online.
Replication will resume automatically once all archive units come online.
          
Action: 
Return missing archive units to the system to resume MTree replication for this context.
If the archive units cannot be restored, contact your contracted support provider or visit us online at https://support.emc.com
foreignPack
systemSerialNumber enclosurePackID
.1.3.6.1.4.1.19746.2.0.10512 
Description: 
The enclosure pack is unusable by the file system.
Storage configuration can not be modified while a foreign device is present.
          
Action: 
If this is expected as part of a chassis swap or chassis upgrade, proceed with
the headswap operation to make the foreign filesystem available.
Otherwise contact your contracted support provider or visit us online at https://support.emc.com.
vDiskSCSITargetMismatch
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10513 
Description: 
VDisk configuration does not match SCSI Target configuration.
Non-matching devices are not available and must be deleted or repaired.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
hATimeOutOfSync
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10514 
Description: 
Timestamps of logs and system events will not match between the HA nodes.
This condition will not have an effect on HA functionality or system operation.
          
Action: 
Set the time on the standby node to match the active node.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
enclosureMixDriveType
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.10515 
Description: 
An unsupported mix of enclosures with different drive types may impact performance and lead to unexpected system behavior.
          
Action: 
Recable the enclosures to eliminate the unsupported mix. Refer to the configuration guide for valid cabling configurations.
fileSpaceSevereAlarm
fileSystemResourceName
.1.3.6.1.4.1.19746.2.0.11 
Meaning: A File System Resource space is 95% utilized.  The index value of the alarm indicates 
the file system index that may be looked up in the fileSystem table 'fileSystemSpace' 
for more information about the actual FS that is getting full. 
What to do: Delete unneeded files, such as old log files, support bundles, core files,
upgrade rpm files stored in the /ddvar file system.  Consider upgrading the hardware or adding
shelves to high-end units.  Reducing the retention times for backup data can also help. When 
files are deleted from outside of the /ddvar space, filesys clean will have to be done before 
the space is recovered.
fileSpaceCriticalAlarm
fileSystemResourceName
.1.3.6.1.4.1.19746.2.0.12 
Meaning: A File System Resource space is 100% utilized.  The index value of the alarm indicates 
the file system index that may be looked up in the fileSystem table 'fileSystemSpace' 
for more information about the actual FS that is full. 
What to do: Delete unneeded files, such as old log files, support bundles, core files,
upgrade rpm files stored in the /ddvar file system.  Consider upgrading the hardware or adding
shelves to high-end units.  Reducing the retention times for backup data can also help. When 
files are deleted from outside of the /ddvar space, filesys clean will have to be done before 
the space is recovered.
diskFailedAlarm
diskSerialNumber
.1.3.6.1.4.1.19746.2.0.14 
Meaning: some problem has been detected about the indicated disk.  The index value 
of the alarm indicates the disk index that may be looked up in the disk tables 
'diskProperties', 'diskPerformance', and 'diskReliability' for more information 
about the actual disk that has failed.
What to do: replace the disk.
diskOverheatWarningAlarm
diskTemperature
.1.3.6.1.4.1.19746.2.0.15 
Meaning: the temperature reading of the indicated disk has exceeded the 'warning' 
temperature level.  If it continues to rise, it may eventually trigger a 
shutdown of the DDR.  The index value of the alarm indicates the disk index that
may be looked up in the disk tables 'diskProperties', 'diskPerformance', and 
'diskReliability' for more information about the actual disk reading the high value.
What to do: check the disk status, temperatures of the environment in which the DDR is,
and other factors which may increase the temperature.
diskOverheatAlertAlarm
diskTemperature
.1.3.6.1.4.1.19746.2.0.16 
Meaning: the temperature reading of the indicated disk is more than halfway between
the 'warning' and 'shutdown' temperature levels. If it continues to rise, it will 
trigger a shutdown of the DDR.  The index value of the alarm indicates the disk index that
may be looked up in the disk tables 'diskProperties', 'diskPerformance', and 
'diskReliability' for more information about the actual disk reading the high value.
What to do: check the disk status, temperatures of the environment in which the DDR is,
and other factors which may increase the temperature.  If the temperature continues stays
at this level or rises, and no other disks are reading this trouble, consider 'failing'
the disk, and get a replacement.
diskOverheatShutdownAlarm
diskTemperature
.1.3.6.1.4.1.19746.2.0.17 
Meaning: the temperature reading of the indicated disk has surpassed the 'shutdown' 
temperature level. The DDR will be shutdown.  The index value of the alarm indicates 
the disk index that may be looked up in the disk tables 'diskProperties', 'diskPerformance', 
and 'diskReliability' for more information about the actual disk reading the high value.
What to do: Boot the DDR and monitor the status and temperatures.  If the same disk has
continued problems, consider 'failing' it and get a replacement disk.
raidReconSevereAlarm .1.3.6.1.4.1.19746.2.0.18 
Meaning: A raid group is MAX degraded with no reconstruction after less than 71 hours or 
A disk group is degraded with none max degraded with no reconstruction. This alarm is sent 
every 1 hour until 71 hours after which raidReconCriticalAlarm or raidReconCriticalShutdown
alarm is generated. This can happen due to a disk failing at run-time or boot-time.
 What to do: while it is still possible that the reconstruction could succeed, the disk
 should be replaced to ensure data safety.
raidReconCriticalAlarm .1.3.6.1.4.1.19746.2.0.19 
Meaning: Raid group is MAX degraded with no reconstruction after 71 hours. This can
happen due to a disk failing at run-time or boot-up.
What to do: the disk should be replaced to ensure data safety.
systemOverheatWarningAlarm
tempSensorDescription
.1.3.6.1.4.1.19746.2.0.2 
Meaning: the temperature reading of one of the thermometers in the Chassis  has exceeded 
the 'warning' temperature level.  If it continues to rise, it may eventually trigger a 
shutdown of the DDR.  The index value of the alarm indicates the thermometer index that
may be looked up in the environmentals table 'temperatures' for more information about
the actual thermometer reading the high value.
What to do: check the Fan status, temperatures of the environment in which the DDR is,
and other factors which may increase the temperature.
raidReconCriticalShutdownAlarm .1.3.6.1.4.1.19746.2.0.20 
Meaning: Raid group is MAX degraded with no reconstruction after 71 hours. This can
happen due to a disk failing at run-time or boot-up.
 What to do: the disk must be replaced.
raidGroupMissingAlarm .1.3.6.1.4.1.19746.2.0.21 
Meaning: one or more raid groups are missing.
What to do: disk may need replacement, or raid administration may be necessary.
diskNoSpareAlarm .1.3.6.1.4.1.19746.2.0.22 
Meaning: there is no spare available for the raid group.
What to do: disk may need replacement, or raid administration may be necessary.
diskPathAlarm
diskSerialNumber
.1.3.6.1.4.1.19746.2.0.23 
Meaning: multipath configuration is experiencing a problem.  The number of paths set up is less than 
the required number of paths.  Disk index is the first disk in the enclosure with multipath.
 What to do: multipath disk administration may be necessary.
diskSASAlarm .1.3.6.1.4.1.19746.2.0.24 
Meaning: SAS configuration error.  Maximum enclosures has been reached, or there
is a topology problem.
 What to do: SAS configuration documentation should be consulted.  administration may be necessary.
diskSASHBAAlarm
diskSerialNumber
.1.3.6.1.4.1.19746.2.0.25 
Meaning: Unsupported multi-path setting is enabled in the hba firmware.
What to do: contact Data Domain support.
snapshotFullAlarm .1.3.6.1.4.1.19746.2.0.26 
Meaning: maximum number of snapshots has been reached.
What to do: expire some old snapshots to make room.
snapshotHWMAlarm .1.3.6.1.4.1.19746.2.0.27 
Meaning: the number of snapshots has exceeded a predefined percentage (current 90%) of the maximum.
What to do: begin expiring snapshots so that the maximum is not reached.
clusterNodeAlarm .1.3.6.1.4.1.19746.2.0.28 
Meaning: node is not reachable on any network interface.
What to do: check status of network and wiring.  if that fails, try 
rebooting the node.
clusterInterfaceAlarm .1.3.6.1.4.1.19746.2.0.29 
Meaning: one interface of the cluster node is down.
What to do: check status of network and wiring.  if that fails, try 
rebooting the node.
systemOverheatAlertAlarm
tempSensorDescription
.1.3.6.1.4.1.19746.2.0.3 
Meaning: the temperature reading of one of the thermometers in the Chassis is more than
halfway between the 'warning' and 'shutdown' temperature levels.  If it continues to rise, 
it may eventually trigger a shutdown of the DDR.  The index value of the alarm indicates 
the thermometer index that may be looked up in the environmentals table 'temperatures' 
for more information about the actual thermometer reading the high value.
What to do: check the Fan status, temperatures of the environment in which the DDR is,
and other factors which may increase the system temperature.
replSyncAlarm
replStatus
.1.3.6.1.4.1.19746.2.0.30 
Meaning: a replication context is disabled due to nvram loss.
What to do: break replication on source and destination, then reconfigure
them and run replication sync.
systemStartupAlarm .1.3.6.1.4.1.19746.2.0.31 
Meaning: system has rebooted or started.  this does not indicate any abnormal activity.
What to do: nothing, unless reboot was triggered by other abnormal conditions, such as
temperature, fan or power problems.
filesysRelaunchAlarm .1.3.6.1.4.1.19746.2.0.32 
Meaning: file system has undergone too many relaunches.  it is probably unstable.
What to do: consult system logs.  software or hardware restart may fix the malfunction.
filesysDDGCFailedAlarm .1.3.6.1.4.1.19746.2.0.33 
Meaning: DDGC cleaning process has failed.
What to do: consult system logs.  software or hardware restart may fix the malfunction.
filesysGeneralProblemAlarm .1.3.6.1.4.1.19746.2.0.34 
Meaning: a general problem has occurred with the file system.
What to do: consult system logs.  software or hardware restart may fix the malfunction.
diskUnsupportedAlarm
diskSerialNumber
.1.3.6.1.4.1.19746.2.0.35 
Meaning: the model of the disk is unsupported by current DD platform.  The index value 
of the alarm indicates the disk index that may be looked up in the disk tables 
'diskProperties', 'diskPerformance', and 'diskReliability' for more information 
about the actual disk.
What to do: replace the disk.
eventIPMIUnmanageAlarm .1.3.6.1.4.1.19746.2.0.36 
Meaning: IPMI unmanaged alert detected.
What to do: check alert message
systemOverheatShutdownAlarm
tempSensorDescription
.1.3.6.1.4.1.19746.2.0.4 
Meaning: the temperature reading of one of the thermometers in the Chassis has reached
or exceeded the 'shutdown' temperature level. The DDR will be shutdown to prevent damage
to the system.  The index value of the alarm indicates the thermometer index that may be
looked up in the environmentals table 'temperatures' for more information about the actual 
thermometer reading the high value.
What to do: Once the system has been brought back up, after checking for high environment
temperatures or other factors which may increase the system temperature, check other 
environmental values, such as Fan Status, Disk Temperatures, etc...
fanModuleFailedAlarm
fanDescription
.1.3.6.1.4.1.19746.2.0.5 
Meaning: a Fan Module in the enclosure has failed.  The index of the fan is given
as the index of the alarm.  This same index can be looked up in the environmentals
table 'fanProperies' for more information about which fan has failed.
What to do: replace the fan
controllerUnreachableAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5002 
Description: 
This is a GDA event raised by the Master controller when it fails to reach a Worker
controller for more than 5 minutes. An unreachable Worker controller implies none of the Worker
controller interfaces are pingable from the Master controller.
          
Action: 
Check the status of network interfaces on both controllers.
Check network connectivity between the Master and Worker controller.
Make sure all cables are securely connected.
controllerIfaceUnreachableAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5003 
Description: 
This is a GDA event raised by the Master controller when it fails to reach a particular
Worker controller interface for more than 5 minutes. An unreachable interface implies that
it is not pingable from its Master controller equivalent interface.
          
Action: 
Check network interface status on both controllers.
Check network connectivity between the Master and Worker controller.
Make sure all cables are securely connected.
correctableECCLimitReached
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5004 
Description: 
Single bit correctable ECC limit reached.
          
Action: 
Replace the failed DIMM(s).
Contact your contracted support provider or visit us online at https://support.emc.com.
uncorrectableECCerror
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5005 
Description: 
Multi bit uncorrectable ECC error.
          
Action: 
Replace the failed DIMM(s).
Contact your contracted support provider or visit us online at https://support.emc.com.
legacyChassisTempWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5006 
Description: 
Current temperature sensor reading exceeds warning threshold.
          
Action: 
Monitor temperature readings. If alert persists, check ambient room temperature and for blocked air flow.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
legacyChassisTempCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5007 
Description: 
Current temperature sensor reading exceeds critical threshold.
          
Action: 
Check ambient room temperature and for blocked air flow.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
legacyPowerSupplyWarning
systemSerialNumber powerModuleDescription
.1.3.6.1.4.1.19746.2.0.5008 
Description: 
A power supply has failed, is unplugged, or absent.
          
Action: 
Check power supply cables and LED. Replace with other working power supply.
If there are outstanding alerts for all power supplies in an enclosure, the
system must be shutdown before replacing any power supply. 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
legacyFanWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5009 
Description: 
A fan has failed.
          
Action: 
Check for any failed fan. If failed, replace with new fan.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
powerSupplyWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5010 
Description: 
A power supply has failed, is unplugged, or absent.
          
Action: 
Check power supply cables and LED. Replace with other working power supply.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
fanWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5011 
Description: 
A fan has failed or is missing.
          
Action: 
Check for any failed or missing fan. Reseat the fan.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
voltageWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5012 
Description: 
Voltage sensor reading exceeds warning threshold.
          
Action: 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
powerWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5013 
Description: 
Current power consumption reading exceeds warning threshold.
          
Action: 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
correctECCWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5014 
Description: 
Memory correctable ECC errors exceed warning threshold.
          
Action: 
These memory errors are automatically corrected by the system. 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
processorWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5016 
Description: 
Processor status sensor alert.
          
Action: 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
powerUnitWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5017 
Description: 
This event is expected after power off, power cycle, or AC power loss event.
          
Action: 
If this alert is not expected, check power cords and AC power.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
unCorrectECCWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5018 
Description: 
Memory uncorrectable ECC error alert.
          
Action: 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
chassisSensorCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5020 
Description: 
Current sensor reading or state exceeds critical condition.
          
Action: 
Check the specific alert message for information.
Monitor temperature readings. If alert persists, check ambient room temperature 
and for blocked air flow. 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
chassisTempWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5021 
Description: 
Current temperature sensor reading exceeds warning threshold.
          
Action: 
Monitor temperature readings. If alert persists, check ambient room temperature 
and for blocked air flow. 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
chassisTempCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5022 
Description: 
Current temperature sensor reading exceeds critical threshold.
          
Action: 
Check ambient room temperature and for blocked air flow. 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
cPUFailureWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5023 
Description: 
DDOS has detected a fault with the indicated CPU.
          
Action: 
 Contact your contracted support provider or visit us online at https://support.emc.com.
legacyBMCHangCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5024 
Description: 
While BMC is unresponsive, environmental monitoring and remote access via IPMI is not operational.
This could mask serious problems such as overheating.
          
Action: 
Use CLI or Enterprise Manager to check fan, voltage, and power supply readings.
If the system fails to fetch the readings, gracefully shut down the system and pull out all power cables to reset BMC.
Wait until all LEDS are off. Reinsert the power cables and then power the system up.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
bMCHangCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5025 
Description: 
While BMC is unresponsive, environmental monitoring and remote access via IPMI is not operational.
This could mask serious problems such as overheating.
          
Action: 
Use CLI or Enterprise Manager to check fan, voltage, and power supply readings.
If the system fails to fetch the readings, gracefully shut down the system and pull out all power cables to reset BMC.
Wait until all LEDS are off. Reinsert the power cables and then power the system up.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
abnormalShutdown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5026 
Description: 
The system has been shutdown by abnormal method, i.e. not by one of the following: 
1) Via IPMI chassis control command 
2) Via power button
3) Via OS shutdown
          
Action: 
This alert is expected after loss of AC (main power) event.
If this shutdown is not expected and persists, contact your contracted support provider or visit us online at https://support.emc.com.
tooManyRelaunches
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5027 
Description: 
The filesystem has failed to restart after multiple attempts.  Backup and restore services are unavailable.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to diagnose the failure.
filesystemProblem
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5028 
Description: 
A problem is preventing the filesystem from running. This usually 
involves the storage being unavailable.
          
Action: 
Check disk shelf cabling.  If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
dDFSFailedInShutdown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5030 
Description: 
The filesystem shut down encountered an error. This can potentially leave data in the NVRAM 
which would be normally flushed to the disk.  Failed shutdown can leave the filesystem in a 
state that can prevent certain operations from being performed (i.e. system upgrade,
filesys destroy, etc.) and may cause data loss.
          
Action: 
Re-enable the filesystem and try shutting it down again. If the problem persists, 
Contact your contracted support provider or visit us online at https://support.emc.com.
dDFSNoHeartbeat
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5034 
Description: 
Filesystem has encountered an error and is forced to restart.
          
Action: 
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
dDFSDiedAfterReboot
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5036 
Description: 
The filesystem failed to startup immediately after system reboot.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com for diagnosis of the cause of failure. No other 
action required if filesystem successfully restarts.
dDFSDied
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5037 
Description: 
The filesystem process failed and is restarting.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com for diagnosis of the cause of failure. No other 
action required if filesystem successfully restarts.
dDFSRebooted
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5038 
Description: 
This is just a notification alert that the system has been rebooted.
          
Action: 
No action required.
dDFSRebootedDisabled
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5039 
Description: 
This is a notification alert sent out during system startup following a 
reboot. The system is rebooted with the filesystem in disabled state.
          
Action: 
No action is required unless the intent is to have the filesystem enabled. 
In that case, invoke the 'filesys enable' command.
indexRebuildComplete
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5040 
Description: 
The metadata rebuild operation that was started by support has completed. The system is ready for the next action. 
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to perform the next operation on your system.
historicalDatabaseRecoverError
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5041 
Description: 
All existing historical data has been lost. Data in the historical
database is used for some system reports, but it is not required for proper
system functioning. This failure may occur during head swap processing if
recovery to create the new head primary historical database from the shelf
database files fails or historical database may be corrupted.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to debug this problem and possibly attempt recovery of the lost historical data.
historicalDatabaseBackupError
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5042 
Description: 
Historical database backup failed. If the primary historical
database fails without a recent backup present, some or all of the historical
data can be lost when the primary historical database is restored from its
backup and log files. Data in the historical database is used for some system
reports, but it is not required for proper system functioning.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to help debug the problem.
historicalDatabaseUpgradeError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5043 
Description: 
Historical database upgrade failed during software upgrade.  New historical
data fields will not be saved.  Some UI reports might be unavailable, or
be missing data. Otherwise, this should not affect the system.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to help debug the problem and upgrade the historical database.
historicalDatabasePruneError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5044 
Description: 
Historical database pruning failed.  Pruning ensures the historical database
does not consume more than its allocated disk space.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to help debug the problem.
noHistoricalDatabaseError
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5045 
Description: 
Data in the historical database is used for some system reports,
but it is not required for proper system functioning. This failure may occur
during head swap processing if recovery to create the new head primary
historical database from the shelf database files fails or the database has
been corrupted. The system is running without historical database after failing
to create a new one.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
to debug this problem and possibly attempt recovery of the lost historical data.
hDTFileTransferFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5046 
Description: 
Unable to send historical data update file to Data Domain Management Center.
          
Action: 
Check DNS settings and network connection between the Data Domain
System and Data Domain Management Center.  If the problem persists,
contact your contracted support provider or visit us online at https://support.emc.com.
hDTSystemError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5047 
Description: 
System Error occurred while sending historical data to Data Domain Management Center.
          
Action: 
Check configuration and system status, messages logs for indicative problems.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
dIMMFailureAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5048 
Description: 
DIMM failure detected. DDFS can't be enabled.
          
Action: 
Replace the bad DIMMS.
memoryAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5049 
Description: 
Current memory is less than configured. DDFS can't be enabled.
          
Action: 
Check the DIMMS in DDR. Add new DIMMS and/or replace the bad DIMMS.
portPathDisabled
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5050 
Description: 
A path is disabled. Multipath failover will not work correctly until the port is enabled.
          
Action: 
Verify all storage cabling is connected correctly.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
diskPathRedundancy
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5051 
Description: 
Since only one HBA controller has been detected, disk path redundancy is lost.
          
Action: 
If the HBA configuration is correct, disable multipath configuration. Otherwise: 1)Use 
'disk multipath status' to examine connection status; 2)Verify all storage cabling is connected 
correctly; 3)Use 'enclosure' commands to verify that HBA controllers are functional.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
missingPortConnection
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5052 
Description: 
A port and the attached storage have disappeared.
          
Action: 
Verify the connection and any external storage connected to the missing port.
missingLunPath
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5053 
Description: 
The number of active paths to a LUN has changed.
          
Action: 
If this is due to reconfiguration, verify the topology and disable then re-enable
multipath monitoring to reset the monitoring. If not, verify the storage cabling and that
all paths are connected.
missingDiskPath
systemSerialNumber diskSerialNumber
.1.3.6.1.4.1.19746.2.0.5054 
Description: 
The number of active paths to a disk has decreased. Multipath redundancy has been lost
unless there are more than one connection paths.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
missingEnclosurePath
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5055 
Description: 
The number of active paths to a disk has decreased. Multipath redundancy has been lost
unless there are more than one connection paths.
          
Action: 
Use 'enclosure' commands to verify that HBAs are functional.
If this condition is due to configuration change: verify the topology, and then disable and 
re-enable disk multipath monitoring to reset connection counts.
If not, verify the storage cabling is connected correctly.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
nvramWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5059 
Description: 
DDFS is disabled due to a problem with the NVRAM subsystem.
          
Action: 
Check for other NVRAM-related alerts and follow the action described in those alerts.
nvramBatteryAlert
systemSerialNumber nvramBatteryStatus
.1.3.6.1.4.1.19746.2.0.5060 
Description: 
DD OS detected an NVRAM card Battery Unit hardware fault.
Probable causes:  1) Battery charging is disabled, or  2) One or more batteries are not charging.
          
Action: 
Run CLI command 'system show nvram' to check battery status.
If the problem persists,   contact your contracted support provider or visit us online at https://support.emc.com.
nvramErrorAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5061 
Description: 
DD OS detected an NVRAM card fault.
Probable cause: Excessive correctable errors exceed the warning threshold number.
          
Action: 
The NVRAM card may need to be replaced.
Contact your contracted support provider or visit us online at https://support.emc.com.
phyalert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5062 
Description: 
Enclosure slot has been disabled due to continuous discovery caused by a failed drive.
          
Action: 
Replace the failed drive.
Use 'disk rescan' command specifying the disk and enclosure id to re-enable the slot.
replProgressThreshholdReached
systemSerialNumber replStatus
.1.3.6.1.4.1.19746.2.0.5063 
Description: 
Collection replication has not made progress and there is data waiting to be replicated.
This means your replica is not up to date.
          
Action: 
 - check the 'replication status' or the GUI for errors
 - check the replica filesystem
 - check the network
 - if problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
replNeedResync
systemSerialNumber replStatus
.1.3.6.1.4.1.19746.2.0.5064 
Description: 
Replication will not proceed until this context is resynced. 
          
Action: 
To re-establish replication
    - Note the context information
    - break the context
    - reconfigure contexts on both source and destination
    - resync context on the source
replLogFull
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5065 
Description: 
No data can be written to the filesystem. Too much data remains to be replicated.
This can be caused by disabled contexts or slow replication.
When the condition is resolved, the filesystem will be writable again.
          
Action: 
Refer to knowledge base for articles discussing ways to reduce replication lag.
replIncompatibleWorm
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5066 
Description: 
New retention-locked files detected on destination during replication resync. Resync cannot proceed.
          
Action: 
Break the existing context and resync to a new destination.
replDestNotConfigured
systemSerialNumber replConfigDest
.1.3.6.1.4.1.19746.2.0.5067 
Description: 
Replication context on the destination is missing or mis-matched. Cannot initialize context.
          
Action: 
- Check both the source and destination configured context URL pair. The context is identified by the destination URL.
- Make sure the destination has a matching configuration for this context.
replLagThreshholdReached
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5068 
Description: 
Replication lag threshold has been exceeded.
          
Action: 
Refer to the knowledge base on ways to resolve the replication lag.
sASEnclosureCheck
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5069 
Description: 
The number of enclosures connected to the port has exceeded the maximum supported limit.
This may cause an unexpected behavior.
          
Action: 
Reduce the number of enclosures down to the limit for the system.
sASTopologyCheck
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5070 
Description: 
Invalid cabling has been detected. This may cause unexpected behavior.
          
Action: 
Refer to the cabling guide. Verify the connectivity of the SAS enclosures by using command
 'enclosure show topology'.
sASPortDisabled
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5071 
Description: 
Excessive errors have caused this port to be disabled. This could be caused by faulty cables or shelf controllers.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com .
sSLCertificateCorrupted
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5072 
Description: 
The SSL certificate used to establish mutual trust between Data Domain systems is broken.        
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
snapshotOver90Percent
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5075 
Description: 
Current number of snapshots for an Mtree is at 90% or more of the maximum number of snapshots allowed.
          
Action: 
Consider expiring existing snapshots of that Mtree with the 'snapshot expire' command or 
adjusting scheduled snapshot retention periods with the 'snapshot schedule modify' command.
snapshotLimitReached
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5076 
Description: 
Data Domain system has a limit on the number of existing snapshots held at once for a single Mtree.
Once this limit is reached no more snapshots can be created of that Mtree.
          
Action: 
Consider expiring existing snapshots of that Mtree with 'snapshot expire' command to make room for newer ones.
sNTZMultipleIterations
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5077 
Description: 
Indicates that sanitization will be run in multiple iterations.
In the worst case this can take 15-20 days for 280 TBs. It means 
that the system will not run at full speed for that period of 
time and that GC will not be run to reclaim space. However, 
sanitization will also reclaim space back but it might not be 
as efficient as GC is.
          
Action: 
Make sure that you have enough space to not run out of space and
that you can wait that many days in the worst case. You should have
at least 20% of physical space available. Other option is
to abort sanitization, delete a bunch of files and try again. You can
do this process iteratively until you do not get this alert anymore.
coredumpWarning
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5078 
Description: 
/ddvar might soon run out of space to save system core dumps.
          
Action: 
Remove unwanted files from /ddvar to free up some space.
Lack of space can result in missing core dumps that will hamper debugging operations.
coredumpDisabled
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5079 
Description: 
Space in /ddvar is not sufficient enough for saving system core dumps.
          
Action: 
Remove unwanted files from /ddvar to free up some space.
Lack of space can result in missing core dumps that will hamper debugging operations.
spaceOver80Percent
systemSerialNumber fileSystemSpaceUsed
.1.3.6.1.4.1.19746.2.0.5080 
Description: 
Space usage has exceeded 80% of the total capacity.
Lack of space can result in missing important logs or loss of file system functionality.
          
Action: 
If it is in root, contact your contracted support provider or visit us online at https://support.emc.com to free up some space.
If it is in /ddvar, remove unwanted files to free up some space.
If it is in active tier, remove unwanted files and start file system cleaning or add storage.
If it is in archive tier, remove unwanted files or add more archive units to the filesystem.
spaceOver90Percent
systemSerialNumber fileSystemSpaceUsed
.1.3.6.1.4.1.19746.2.0.5081 
Description: 
Space usage has exceeded 90% of the total capacity.
Lack of space can result in missing important logs or loss of file system functionality.
          
Action: 
If it is in root, contact your contracted support provider or visit us online at https://support.emc.com to free up some space.
If it is in /ddvar, remove unwanted files to free up some space.
If it is in active tier, remove unwanted files and start file system cleaning or add storage.
If it is in archive tier, remove unwanted files or add more archive units to the filesystem.
diskAccessError
systemSerialNumber diskSerialNumber
.1.3.6.1.4.1.19746.2.0.5082 
Description: 
A hardware fault has been detected for this drive. The drive or the cabling to it may have a problem.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
diskFailure
systemSerialNumber diskSerialNumber
.1.3.6.1.4.1.19746.2.0.5083 
Description: 
Unable to communicate with a disk. This disk cannot be used at this time.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
diskTemperatureWarning
systemSerialNumber diskTemperature
.1.3.6.1.4.1.19746.2.0.5084 
Description: 
The disk temperature has exceeded a specified threshold. If the temperature continues to increase,
the system could fail or the system could be shut down.
          
Action: 
If the temperature is high due to high activity for a short period, it should return to normal in a short time.
Verify the environment is at its normal temperature. If not, correct this condition.
Check for fan failures and free air flow.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
diskTemperatureShutdown
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.5085 
Description: 
One or more disks have exceeded the shut down temperature threshold. The system is shutting down.
          
Action: 
Verify the environment is at its normal temperature. If not, correct this condition.
Check for fan failures and free air flow.
unsupportedHardwareSpareSize
systemSerialNumber diskSerialNumber
.1.3.6.1.4.1.19746.2.0.5086 
Description: 
The disk capacity is too small for it to be of any use in the system.
          
Action: 
Replace with a larger capacity disk.
missingDiskGroup
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5087 
Description: 
One or more critical disks/LUNs are unavailable.
          
Action: 
Make sure all storage is securely connected.
Look at alert history for any path failures.
Check for any core files, a critical layer may be unavailable.
Verify that all storage is working and recognized correctly.
diskGroupReconstructionNoProgress
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5088 
Description: 
One or more disks are failed and the RAID reconstruction is not running.
          
Action: 
Make sure there is/are spare disk(s) in the system.
diskGroupReconstruction
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5089 
Description: 
Two or more disks are failed and the RAID protection is in critical state.
If an additional disk fails, there might be permanent loss of data.
The system will shut down if the problem is not fixed.
          
Action: 
Make sure there is/are spare disk(s) in the system.
diskGroupReconstructionShutdown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5090 
Description: 
Two or more disks are failed and the RAID protection is in critical state for over a
considerable period of time. If an additional disk fails, there might be permanent loss of
data. The system will shut down.
          
Action: 
Restart the system and make sure there is/are spare disk(s) in the system.
diskGroupReconstructionCritical
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5091 
Description: 
Two or more disks are failed and the RAID protection is in critical state for over a
considerable period of time. If an additional disk fails, there might be permanent loss of
data.
          
Action: 
Make sure there is/are spare disk(s) in the system.
diskUnknown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5092 
Description: 
Disk is unknown.
          
Action: 
Add disk to the system.
lowSpares
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5094 
Description: 
Not enough spare disks can be detected for this tier.
There may be failed disks or connectivity issues with disks or enclosures.
          
Action: 
Replace any failed or absent disks. Check enclosure connectivity.
unsupportedConfigurationROL
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5095 
Description: 
Raid on LUN from 4.8 is no longer supported.  Please follow instruction on how to increase 
usable space in your filesystem. 
          
Action: 
        1) migrate data away 
        2) do a filesystem destroy
        3) add your LUN
        4) migrate data back
cpismissing
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5500 
Description: 
An archive unit is missing which could result in failure to access files in that unit.
          
Action: 
- check power connection of each shelf.
- check data cables of each shelf.
- if a hardware problem is found and fixed, restart the files system and verify that the archive unit is online.
- If the problem persists,  contact your contracted support provider or visit us online at https://support.emc.com.
containerMarkedInvalid
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5501 
Description: 
The restorer filesystem has detected a data integrity check failure
due to hardware/software problems. There is potential for data loss or
corruption and needs immediate attention.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
smiMrc
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5502 
Description: 
BIOS SMI MRC interrupt
          
Action: 
Check if system memory size has been decreased due to a DIMM has been disabled.
If yes, replace the bad DIMM.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
nvramBatteryLowChargeAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5508 
Description: 
The NVRAM battery is charging, but is below the threshold.  
The filesystem will not start until the battery charge reaches the threshold.
          
Action: 
Wait for the battery charge to reach threshold.
If the battery does not reach threshold within 3 hours, contact your contracted support provider or visit us online at https://support.emc.com
ext3NvlogDisabled
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5527 
Description: 
DDOS RAID log is disabled due to a problem with the NVRAM subsystem.
          
Action: 
Check for other NVRAM-related alerts and follow the action described in those alerts.
enclosureMixType
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5528 
Description: 
An unsupported mix of enclosure models have been detected. For example, a mixture of ES30s and ES20s.
          
Action: 
Refer to the configuration guide for valid cabling configurations.
replPathTooLong
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.5531 
Description: 
Path is too long
          
Action: 
 Shorten the path.
nvramFailingAlarm .1.3.6.1.4.1.19746.2.0.6 
Meaning: The system has detected that the NVRAM is potentially failing.  There has
been an excessive amount of PCI or Memory errors. The nvram tables 'nvramProperties'
and 'nvramStats' may provide for information on why the NVRAM is failing.
What to do: check the status of the NVRAM after reboot, and replace if the
errors continue.
compromisedEncryptionKeys
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6001 
Description: 
Data on disk may be at risk of disclosure. Data encrypted with
the compromised keys should be re-encrypted before shipping the disks.
One can get the list of compromised keys either from CLI or Enterprise Manager.
          
Action: 
Start file system cleaning to re-encrypt the affected data. 
For extended retention systems, run space reclamation to re-encrypt affected data in the archive tier.
Note, these operations will take a long time to complete.
newEncryptionKey
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6002 
Description: 
Old key is still used for encrypting new data.
The file system needs to be restarted to activate the new key.
          
Action: 
Restart the filesystem.
encryptionKeyTableFull
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6003 
Description: 
Encryption key table is full. No new keys can be added until some keys are
deleted.
          
Action: 
Free up key table space by deleting an unused key and then add the new key.
uncertifiedFirmware
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6004 
Description: 
Firmware version is not compatible with this version of DDOS and may cause unexpected behavior.
          
Action: 
The firmware must be updated as soon as possible, contact your contracted support provider or visit us online at https://support.emc.com.
filesystemNVRAMDataLoss
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.6005 
Description: 
Filesystem cannot be enabled because of NVRAM mismatch. This can happen because of an improper headswap or NVRAM card replacement operation.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
mtreeQuotaSoftLimit
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6007 
Description: 
The Soft Limit Quota for this MTree has been reached.  This will not affect the operation of the system and is only a warning.
If a Quota Hard Limit is set for this MTree, you are approaching that limit and operations writing data to this MTree may fail if the hard limit is reached.
          
Action: 
To clear this alert, either raise the quota limits or reduce the data in the MTree by deleting files.
mtreeQuotaHardLimit
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6008 
Description: 
The Hard Limit Quota for this MTree has been reached. No more data will be written to this MTree.
If a backup operation was running, it probably failed and must be restarted after clearing this condition.
          
Action: 
To clear this alert, either raise the Quota Hard Limit for this MTree, or reduce the data in the MTree by deleting files.
interfaceConnectivityDown
systemSerialNumber IF-MIBifIndex IF-MIBifDescr
.1.3.6.1.4.1.19746.2.0.6009 
Description: 
Network connectivity on this interface is down.
This interface is not pingable and cannot be used to send or receive any data.
All data transfers using this interface will fail.  
          
Action: 
Please view the Hardware->Network GUI page, or use the 'net show settings' and 'net show config' CLIs to check the current configuration.
Make sure that the cable is securely connected to both endpoints and that the interfaces on both ends are properly configured.
Otherwise the cable or network hardware could be faulty and may need to be replaced.
interfaceConnectivityIntermittent
systemSerialNumber IF-MIBifIndex IF-MIBifDescr
.1.3.6.1.4.1.19746.2.0.6010 
Description: 
Network connectivity on this interface is intermittent. Data may not be sent or received successfully. 
Data transfers using this interface may experience performance degradation or intermittent failures.
          
Action: 
Please view the Hardware->Network GUI page, or use the 'net show settings' and 'net show config' CLIs to check the current configuration.
Make sure that the cable is securely connected to both endpoints and that the interfaces on both ends are properly configured.
Otherwise the cable or network hardware could be faulty and may need to be replaced.
If the network is configured properly and the problem still persists, contact your contracted support provider or visit us online at https://support.emc.com.
interfaceMisconfiguration
systemSerialNumber IF-MIBifIndex IF-MIBifDescr
.1.3.6.1.4.1.19746.2.0.6011 
Description: 
Network interface configuration problem detected. This may be a result of changing the NIC hardware without reconfiguring the interface.
This could indicate an unsupported configuration, network environment or hardware problem.
A misconfigured interface can potentially cause connectivity problems on subsequent reboots.
          
Action: 
Please view the Hardware->Network GUI page, or use 'net show settings', 'net config' and 'net show hardware' to check network configuration.
Try to fix the problem by reconfiguring the interface with 'net config'.
recoverFromNVRAMFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6013 
Description: 
Due to NVRAM issues, filesystem has been disabled in order to maintain data integrity.
No backups will run until this problem is resolved.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
cleaningError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6014 
Description: 
Unable to reclaim unused space and this may impact the ability to backup.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
bMCPartialHang
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6015 
Description: 
BMC firmware is not responsive.
          
Action: 
Use CLI or Enterprise Manager to check fan, voltage, and power supply readings.
If the system fails to fetch the readings, gracefully shut down the system and pull out all power cables to reset BMC.
Wait until all LEDS are off. Reinsert the power cables and then power the system up.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
fileMigrationError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6016 
Description: 
File migration is suspended until this problem is resolved.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
unusableHostCertificate
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.6017 
Description: 
Enterprise Manager will not start up using the imported certificate. However, it will start up using the default self-signed certificate. 
Following is the list of possible causes of this alert,
- the file system is locked
- the system passphrase is missing
- the imported certificate is corrupted
          
Action: 
Unlock the file system if it is locked.
Enter the system passphrase if it is missing.
Delete and reimport the current host certificate if it is corrupted.
In all cases, the Enterprise Manager needs to be restarted.
If the condition persists, contact your contracted support provider or visit us online at https://support.emc.com
missingHostCertificate
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.6018 
Description: 
The imported certificate is missing. However, the Enterprise Manager will start up using the default self-signed certificate.
          
Action: 
If you want to use your own certificate, import it again.
foreignEnclosure
systemSerialNumber enclosureListNum
.1.3.6.1.4.1.19746.2.0.6019 
Description: 
The enclosure is unusable by the filesystem.
Storage configuration can not be modified while a foreign device is present.
          
Action: 
If this is expected as part of a chassis swap or chassis upgrade, proceed with
the headswap operation to make the foreign filesystem available.
Otherwise contact your contracted support provider or visit us online at https://support.emc.com.
interfaceConnectivityUpAndRunning
systemSerialNumber IF-MIBifIndex IF-MIBifDescr
.1.3.6.1.4.1.19746.2.0.6020 
Description: 
Network interface is up and running for a period of time after experiencing instability.
          
Action: 
No action needed.
tcpZeroWindowAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6101 
Description: 
The TCP connection is active but data is not being transferred.
This may cause other communication failures.
          
Action: 
Check the remote application that uses this TCP connection.
Check the network path between the local and remote systems.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
insecureEncryptedReplication
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6102 
Description: 
Encrypted replication is configured between this system and the remote host.
The remote host is running a DDOS version that does not support a fully secure communication protocol.
Unauthorized individuals may be able to intercept and decrypt the replicated data.
          
Action: 
Upgrade the remote system to a release that supports the desired communication protocol.
Contact your contracted support provider or visit us online at https://support.emc.com
nvramHWAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6504 
Description: 
The NVRAM card is not in a usable state.
The file system cannot be accessed until the fault is corrected or the NVRAM card is replaced.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
nvramEnvAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6505 
Description: 
The temperature sensor on the NVRAM card or the remote battery detected a temperature 
that is higher than the warning threshold.  If there are other environmental alerts, 
this may indicate a cooling problem where the system is installed.  
If there are no other environmental alerts, this may indicate a problem with this component.  
When the temperature is reduced, this alert will clear.
          
Action: 
Check cooling and airflow around the system unit.  Remove any blockage, or ensure 
the environmental systems are operating correctly, and the environment is at a normal 
temperature.  If there is no problem in the environment, or if only the NVRAM or 
remote battery are reporting this problem, contact your contracted support provider or visit us online at https://support.emc.com.
nvramEventHWAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6506 
Description: 
NVRAM firmware detects an NVRAM card hardware fault.
          
Action: 
The NVRAM card may need to be replaced. Contact your contracted support provider or visit us online at https://support.emc.com.
nvramBattAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6507 
Description: 
The remote battery for an NVRAM card is not in a usable state.
The file system cannot be accessed until the fault is corrected or the NVRAM remote battery is replaced.
          
Action: 
Check NVRAM battery status.
Check the cables between the remote battery and the power source, and between the remote battery 
and the NVRAM card. If the cables are correctly connected and the problem persists, 
Contact your contracted support provider or visit us online at https://support.emc.com.
nvramCondAlert
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6508 
Description: 
The NVRAM battery power or charging has been set as disabled. 
This condition is either the result of an explicit setting, or indicates a fault 
in the NVRAM card or battery unit. 
          
Action: 
If the NVRAM battery power was explicitly disabled, enable it using 
the reverse of the procedure used to disable it.  If not, reboot the system.  
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com
upgradeFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6509 
Description: 
During the upgrade process, there was an error that requires manual intervention. The system is not usable.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
upgradeCompleted
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6510 
Description: 
The DD OS upgrade is completed successfully. The system will be ready to use when the filesystem is enabled.
          
Action: 
No action required.
mailserverError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6511 
Description: 
There is a problem communicating with the configured mail server.
The system will not be able to send out any email notifications that includes alerts, autosupports and daily summary emails.
          
Action: 
Make sure that the mail server is configured correctly.
Verify the configured mail server by sending out a test email from the system.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com
invalidNICSlot
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6512 
Description: 
Network interface cards must be installed in their designated slots.
The network card may not function correctly when installed in the wrong slot.
          
Action: 
Please make sure that the Network interface card is installed in a valid slot.
unsupportedNIC
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6513 
Description: 
An unsupported network interface card is installed in the system.
Having an unsupported card installed in the system can cause unexpected errors.
          
Action: 
Remove the card from system.
sASHBAFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6514 
Description: 
Storage is no longer accessible through this HBA.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
sASHBAErrors
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6515 
Description: 
A SAS HBA has detected correctable errors exceeding the warning threshold.
This will reduce throughput and may indicate a failing HBA.
          
Action: 
If this condition persists for more than 24 hours, contact your contracted support provider or visit us online at https://support.emc.com
unsupportedSASDevice
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6516 
Description: 
A SAS HBA has reported a device that is not recognized.
This device is not usable and may adversely affect the system.
          
Action: 
Identify the device and remove it from the topology.
If you believe it is a supported device, contact your contracted support provider or visit us online at https://support.emc.com
fanFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6517 
Description: 
A hardware fault has been detected in an enclosure cooling fan. This may allow the enclosure to overheat.
          
Action: 
The fan must be replaced. Contact your contracted support provider or visit us online at https://support.emc.com
powerSupplyInputFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6518 
Description: 
A power loss has been detected in an enclosure power supply.  This can be caused by a loss of AC power to one power supply.
          
Action: 
Check if AC main power is available to the system. 
Check if power supply cables are properly connected.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com to replace the power supply.
powerSupplyFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6519 
Description: 
A power loss has been detected in an enclosure power supply.  This can be caused by a failure in the power supply.
          
Action: 
Power supply needs to be replaced. Contact your contracted support provider or visit us online at https://support.emc.com
powerSupplyAbsent
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6520 
Description: 
An enclosure power supply is absent.
          
Action: 
Power supply needs to be replaced. Contact your contracted support provider or visit us online at https://support.emc.com
unsupportedACVoltage
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6521 
Description: 
The power supply for this enclosure is connected to an unsupported AC voltage. 
The system may operate at a reduced capacity or unexpectedly shut down.
          
Action: 
 Replace the input power with the supported voltage.
iOModuleFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6522 
Description: 
A fault has been detected with an I/O module and it will not function correctly.
          
Action: 
The I/O module must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
iOModuleInserted
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6523 
Description: 
An I/O module has been inserted during system runtime. The I/O module will not be powered on until the system is restarted.
          
Action: 
Restart the system to activate this module.
mgmtModuleFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6524 
Description: 
A fault has been detected in the management I/O module. Management functions requiring the I/O module will not work.
          
Action: 
The management I/O module must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
dIMMFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6525 
Description: 
A fault has been detected on a memory card. The memory may no longer be usable by the system and the system may not function with the reduced memory capacity.
          
Action: 
The failing memory card must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
sPFault
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6526 
Description: 
A fault has been detected on the storage processor. The system may experience unexpected behavior.
          
Action: 
The failed storage processor must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
chassisFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6527 
Description: 
A fault has been detected in one of the chassis components. The system may experience unexpected behavior. 
          
Action: 
The chassis must be replaced.Contact your contracted support provider or visit us online at https://support.emc.com
forcedControllerShutdown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6528 
Description: 
An environmental condition or hardware fault has been detected that may cause significant damage to the hardware or possible data loss, and the system unit is being shut down.
          
Action: 
Check the environment, If the system environment is at a normal state, restart the system and review the alert history to determine the source of the problem.
Contact your contracted support provider or visit us online at https://support.emc.com
systemReset
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6529 
Description: 
A critical failure caused the system to unexpectedly shut down.
The system was able to boot successfully either because the fault was corrected, the fault was transient, or the system was able to boot without the component causing the fault.
          
Action: 
Review the system for earlier alerts to determine the cause of the unexpected shut down.
Check the system inventory to verify all components are configured as expected. 
If this alert is issued again, contact your contracted support provider or visit us online at https://support.emc.com
duplicateAddressDetection
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.6530 
Description: 
This IP address has been detected on the network. Connections to this IP address will be adversely impacted.
          
Action: 
Make sure the local and remote systems are using different IP addresses. Clear the alert once the problem is resolved.
spaceReclRestartFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6531 
Description: 
Archive space reclamation was running before the last shutdown of the filesystem and could not be restarted automatically.
Space will not be reclaimed in the archive tier until space reclamation is restarted.
          
Action: 
Start space reclamation.
spaceReclMissingUnit
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6532 
Description: 
Archive units are missing. Space reclamation cannot run unless all configured units are attached.
Space will not be reclaimed in the archive tier until space reclamation is restarted.
          
Action: 
Return missing archive units to the system and start space reclamation.
spaceReclUnitReclaimed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6533 
Description: 
All space on the archive unit has been reclaimed. This unit is available to reuse.
          
Action: 
No action is required.
spaceReclError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6534 
Description: 
Archive space reclamation has stopped due to the specified error.
Space will not be reclaimed in the archive tier until the error condition is resolved and space reclamation is restarted.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
enclosureHighTemp
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6535 
Description: 
The temperature inside the enclosure is high and has exceeded the warning threshold.If no action is taken and the temperature continue to increase, the system will shut down.
          
Action: 
If the temperature around the system unit is within the documented operating limits and the air flow is not blocked,
Contact your contracted support provider or visit us online at https://support.emc.com
unsupportedSystemType
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6536 
Description: 
An unsupported system type has been detected and needs 
to be modified or replaced.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
bMCHangShutdown
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6537 
Description: 
While BMC is unresponsive, environmental monitoring and remote access via IPMI is not operational.  This could mask serious problems such as overheating.
          
Action: 
 After the system is shut down, pull out all power cables from the controller to reset BMC.
 Wait until all LEDs are off, reinsert the power cables, and then power the system up.
 If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
expiredHostCertificate
systemSerialNumber
.1.3.6.1.4.1.19746.2.0.6538 
Description: 
Communication using this certificate is vulnerable to disclosure.
          
Action: 
Replace the host certificate with a valid certificate.
sCSITGTInvalidRegistry
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6539 
Description: 
A registry entry used in the SCSI Target system is invalid.
The SCSI Target services, including VTL, DD-BOOST FC and VDISK will be
inaccessible until this problem is resolved.
          
Action: 
The registry entry must be corrected.  
Contact your contracted support provider or visit us online at https://support.emc.com
encryptionKeyExportFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6540 
Description: 
The automatic export of the encryption keys failed.
This could result in encrypted data being inaccessible.
          
Action: 
Manually export the encryption keys.
sSDEndOfLife
systemSerialNumber diskSerialNumber
.1.3.6.1.4.1.19746.2.0.6541 
Description: 
The SSD has reached end of life and could fail at any time.
The system may shut down unexpectedly if the drive is not replaced.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
tapeReposition
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6542 
Description: 
The tape volume was adjusted to the last consistent data position during
VTL recovery. Recent pending updates to the volume may have been discarded.
          
Action: 
Verify that any backup sent to the affected tape at the time of this alert
completed successfully. Reissue the backup if necessary.
multipleDiskReadErrors
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6543 
Description: 
There are too many disks reporting read errors in the same RAID group.
As each of these disks completes reconstruction it will be failed.
If the ongoing RAID reconstruction fails, there might be permanent loss of data.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to determine the number of drives that need to be replaced.
missingCreplUnits
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6544 
Description: 
The collection replication destination is not in a consistent state and will not be usable until matching retention units are added to the destination.
          
Action: 
Add the required retention units to the collection replication destination.
nvramBattEndOfLife
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.6545 
Description: 
The remote battery for NVRAM us currently usable but is approaching the end of its life.
If the battery is not replaced before it reaches end of its life, the filesystem will be disabled.
          
Action: 
To schedule a replacement, contact your contracted support provider or visit us online at https://support.emc.com.
fileSystemFailedAlarm .1.3.6.1.4.1.19746.2.0.7 
Meaning: The File System process on the DDR has had a serious problem and has had
to restart.
What to do: check the system logs for conditions that may be triggering the failure.
Other alarms may also indicate why the File System is having problems.
bMCFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7000 
Description: 
BMC is unresponsive or unable to access some required information. This may be corrected by a BMC reset procedure. If the condition is serious, the file system will be disabled.
          
Action: 
Shut the system down and pull out all power cables from the controller to reset BMC.
Wait until all LEDs are off, reinsert the power cables, and then power the system up.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
unsupportedDriveModel
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7001 
Description: 
This system only supports certain drive models.
The unsupported drives are unusable and must be replaced for proper system operation.
          
Action: 
Identify and remove/replace the unsupported drives.
For assistance, contact your contracted support provider or visit us online at https://support.emc.com
driveMixType
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7002 
Description: 
Mixing drive types within an enclosure is not supported and may cause unexpected system behavior.
          
Action: 
Ensure that all drives within the enclosure are of the same type.
For assistance, contact your contracted support provider or visit us online at https://support.emc.com
sMSUnresponsive
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7500 
Description: 
The System Management Service has reached the maximum number of concurrent 
requests and has been unresponsive for over five minutes. This may indicate 
a serious condition that may need to be addressed by support. The system is 
unable to accept additional commands.
          
Action: 
If this condition persists, contact your contracted support provider or visit us online at https://support.emc.com
nISCommFailure
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7501 
Description: 
Unable to query information from the NIS server. 
This could be a network problem or an authentication failure with the NIS server.
This could prevent NIS servers from completing backups or restoring existing backups.
This alert will clear when communication is established with the NIS server.
          
Action: 
Verify network connection to the NIS server and verify NIS configurations for both systems.
If this problem persists, contact your contracted support provider or visit us online at https://support.emc.com .
unsupportedHardwareConfig
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7502 
Description: 
Unsupported virtual machine hardware configuration was detected.  
This configuration may cause unexpected behavior.
          
Action: 
Fix the hardware configuration to resolve the problem.
If problem persists, restart the system.
unsupportedVirtualCPU
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7503 
Description: 
The current number of CPU sockets and cores in the 
virtual machine configuration is not valid for the 
current storage capacity. The file system will not 
be enabled.
          
Action: 
Power off this virtual machine instance and change 
the virtual machine configuration to match the supported values. 
If you made this change to add storage capacity, you must 
add the additional capacity before enabling the file system.
dNSUnresponsive
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7504 
Description: 
No DNS servers responded to a DNS query. This may be caused by a network failure or a DNS server problem.
System functions that require name address resolution will fail.
          
Action: 
Check the network path and the DNS server to establish communication or remove the DNS entries and add host entries to the hosts table.
If this problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
nTPDFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7505 
Description: 
Network Time Protocol (NTP) daemon is not running. NTP daemon has detected a
time difference between this system and the configured network time server
(drift) greater than the configured maximum and has shut down.
          
Action: 
Disable NTP. Verify time on the NTP server. Set system date/time to match the
time on the NTP server. Enable NTP. If this problem persists, contact your contracted support provider or visit us online at https://support.emc.com.
invalidEnclosureTopology
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7506 
Description: 
The cables connecting enclosures to the controller are not installed correctly. This can cause unpredictable system behavior. Recable the enclosures immediately.
          
Action: 
Display the topology to identify the invalid path(s). Power down the system and cable the enclosures according to the cabling guide for your system.
diskPathSpeedDegraded
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7507 
Description: 
SAS connection speed is degraded and could reduce disk performance.
          
Action: 
Check cable seating and replace if needed.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com
targetDriverPortOffline
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7508 
Description: 
No connection is detected on the Fibre Channel Port. 
          
Action: 
If this port is not in use, please disable it. If port is being
used, please restore Fibre Channel Port connectivity. Alert will be cleared
when port is disabled or online.
targetDriverPortOnline
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7509 
Description: 
Fibre Channel Port is online. 
          
Action: 
No action required
targetDriverPortCore
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7510 
Description: 
An error occurred on the Fibre Channel Port that resulted in a HBA core. 
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to extract and analyze the HBA core.
targetDriverPortMultipleCore
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7511 
Description: 
An error occurred on the Fibre Channel Port that caused multiple HBA core attempts. The Fibre Channel Port is disabled. 
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to replace Fibre Channel HBA.
targetDriverPortFWLoadFailed
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7512 
Description: 
The Fibre Channel Port is unable to load required firmware. The Fibre Channel Port is disabled. 
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com to replace Fibre Channel HBA.
targetDriverPortUnreadable
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7513 
Description: 
Unable to access one or more resources on the HBA. The Fibre Channel Port is disabled. 
          
Action: 
Contact contact your contracted support provider or visit us online at https://support.emc.com to replace Fibre Channel HBA.
targetDriverPortTooManyOsc
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7514 
Description: 
The system has detected a Fibre Channel Port has been transitioning
between online and offline too frequently. This may cause disruption in i/o.
          
Action: 
Please ensure stable port connectivity. Disable the port if it is not in use.
insufficientSpaceForEncryption
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7515 
Description: 
Additional space is needed on the archive tier to encrypt the existing data.
Free space up to 1% of data size may be required.
Un-encrypted data will not get encrypted until sufficient space is available.
          
Action: 
Make free space available in the archive tier by doing one or all of the following:
1. Delete any unwanted data in archive tier and run space-reclamation to reclaim free space.
2. Expand the archive unit by adding some storage, and run space-reclamation.
dDFSRequiresReboot
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7516 
Description: 
File system was unable to start because an abnormal internal
condition was detected.
          
Action: 
Reboot the system. If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
storageUnitStreamSoftLimit
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7517 
Description: 
Stream soft limit quota for this storage-unit and type of stream has been exceeded.
Crossing this limit may cause reduced performance as the system hard limits are reached.
          
Action: 
To clear this alert, configure the backup application to use fewer concurrent streams.
Otherwise, increase the soft limit quota on this storage-unit for this stream type.
spaceReclSuspended
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7518 
Description: 
Archive space reclamation has suspended due to the specified error.
Space will not be reclaimed in the archive tier until the error condition is resolved and space reclamation is resumed.
          
Action: 
 Resume space reclamation after the underlying error condition is corrected. If problem persists,
 Contact your contracted support provider or visit us online at https://support.emc.com.
metadataWarningThreshold
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7519 
Description: 
Large amount of metadata has been created by the filesystem.
Continuing without cleaning would cause the filesystem to enter into read-only mode.
          
Action: 
Clean the filesystem as soon as possible.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com
mtreeCascadeNeedResync
systemSerialNumber replStatus
.1.3.6.1.4.1.19746.2.0.7520 
Description: 
This Mtree is now a cascaded source.  Since this mtree already has data, this replication context requires a resync to proceed. 
          
Action: 
 To re-establish replication
     - Note the context information
     - break the context
     - reconfigure contexts on both source and destination
     - resync context on the source
filesystemCorruption
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7521 
Description: 
Filesystem processing detected some corruption.
This may be isolated to a single file or multiple files, 
preventing you from reading the corrupted files. 
If a system file is affected, the filesystem could be disabled.
Until this corruption is fixed, you will not be able to run cleaning,
data-movement or space reclamation on the affected tier.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com
missingTierStorage
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7522 
Description: 
Critical storage resources are unavailable, preventing the tier from functioning.
          
Action: 
Verify all storage is functional and configured correctly.
If the problem persists, contact your contracted support provider or visit us online at https://support.emc.com
spaceReclUnitError
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7523 
Description: 
Space reclamation encountered an error and cannot proceed on the specified archive unit. 
If you have more than one archive unit, space reclamation will continue on the next unit. 
Space will not be reclaimed in this archive unit until the error condition is resolved 
and space reclamation finishes successfully on this unit.
          
Action: 
Contact your contracted support provider or visit us online at https://support.emc.com.
bMCFailureSysBBU
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.7524 
Description: 
BMC is unresponsive or unable to access some required information. This may be corrected by a BMC reset procedure. If the condition is serious, the file system will be disabled.
          
Action: 
Shut the system down and remove all external power sources from the controller.
Remove the system battery backup unit (BBU).
Wait until all LEDs are off, reinsert the BBU, connect external power, and then power the system up.
If problem persists, contact your contracted support provider or visit us online at https://support.emc.com
fileSpaceMaintenanceAlarm
fileSystemResourceName
.1.3.6.1.4.1.19746.2.0.8 
Meaning: DDVAR File System Resource Space is running low for system maintenance activities.  The
system may not have enough space for the routine system activities to run without error.
What to do: Delete unneeded files, such as old log files, support bundles, core files,
upgrade rpm files stored in the /ddvar file system.
licenseExpiring
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.8001 
Description: 
The temporary license indicated is about to expire. The function provided by this license will cease to operate.
          
Action: 
Contact your [account team] to purchase a license if you wish to continue to use this feature.
licenseExpired
systemSerialNumber alertInfoDescription
.1.3.6.1.4.1.19746.2.0.8002 
Description: 
The temporary license indicated has expired. The function provided by this license has stopped operating.
          
Action: 
Contact your [account team] to purchase a license if you wish to use this feature.
fileSpacePreWarningAlarm
fileSystemResourceName
.1.3.6.1.4.1.19746.2.0.9 
Meaning: A File System Resource space is 80-85% utilized.  While not critical, the space usage
should be monitored.  The index value of the alarm indicates the file system index that may be 
looked up in the fileSystem table 'fileSystemSpace' for more information about the actual FS 
that is getting full. 
What to do: no action is necessary, but the file system should be monitored more closely as it
grows more full.  Further alarms will be sent when and if the file system space is approaching very full.