CTRON-BRIDGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
75

ctPvstStpTable

table obsolete
.1.3.6.1.4.1.52.4.1.2.3.2.2.5 · 1 row entry · 15 columns
Open in standard view 
A collection of spanning tree objects per VLAN.
ctPvstStpEntry entry .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1
An entry related to a specific spanning tree.
Indexes
ctPvstStpVlanId
Column Syntax OID
ctPvstStpVlanId obsolete
The VLAN-ID of the VLAN on which this spanning tree is
running. Writing a VLAN-ID will create
a separate spanning tree for that VLAN, if it previously
was part of the single 802.1Q VLAN.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.1
ctPvstStpProtocolSpecification obsolete
An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…
Enumeration
Enumerated Values:
1unknown
2decLb100
3ieee8021d
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.2
ctPvstStpPriority obsolete
The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.3
ctPvstStpTimeSinceTopologyChange obsolete
The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.4
ctPvstStpTopChanges obsolete
The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.5
ctPvstStpDesignatedRoot obsolete
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originat…
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.6
ctPvstStpRootCost obsolete
The cost of the path to the root as seen from
this bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.7
ctPvstStpRootPort obsolete
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.8
ctPvstStpMaxAge obsolete
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.9
ctPvstStpHelloTime obsolete
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.10
ctPvstStpHoldTime obsolete
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.11
ctPvstStpForwardDelay obsolete
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.12
ctPvstStpBridgeMaxAge obsolete
The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
ctPvstStpBridgeHelloTime. The granularity o…
Integer32r/w
Constraints:
range: 600-4000
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.13
ctPvstStpBridgeHelloTime obsolete
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempte…
Integer32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.14
ctPvstStpBridgeForwardDelay obsolete
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
ctPvstStpBridgeMaxAge. The granulari…
Integer32r/w
Constraints:
range: 400-3000
 .1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.15

ctPvstStpPortTable

table obsolete
.1.3.6.1.4.1.52.4.1.2.3.2.2.6 · 1 row entry · 11 columns
Open in standard view 
A collection of per-port spanning tree objects per VLAN.
ctPvstStpPortEntry entry .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1
A port entry related to a specific spanning tree. Only
ports which are in a VLAN which is running a PVST should
be reported for that VLAN.
Indexes
ctPvstStpVlanId ctPvstStpPort
Column Syntax OID
ctPvstStpPortVlanId obsolete
The VLAN-ID of the VLAN on which this spanning tree is
running.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.1
ctPvstStpPort obsolete
The port number of the port for which this entry
contains Spanning Tree Protocol management information.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.2
ctPvstStpPortPriority obsolete
The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
ctPvstStpPort.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.3
ctPvstStpPortState obsolete
The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.4
ctPvstStpPortEnable obsolete
The enabled/disabled status of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.5
ctPvstStpPortPathCost obsolete
The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.6
ctPvstStpPortDesignatedRoot obsolete
The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.7
ctPvstStpPortDesignatedCost obsolete
The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.8
ctPvstStpPortDesignatedBridge obsolete
The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.9
ctPvstStpPortDesignatedPort obsolete
The Port Identifier of the port on the Designated
Bridge for this port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.10
ctPvstStpPortForwardTransitions obsolete
The number of times this port has transitioned
from the Learning state to the Forwarding state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.11

ctBridgeSrPortPairTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.3.1 · 1 row entry · 4 columns
Open in standard view 
A table containing information of source and
destination port pairs for source routing.
ctBridgeSrPortPairEntry entry .1.3.6.1.4.1.52.4.1.2.3.3.1.1
An entry consisting of objects specifying information
for the source and destination port pairs used for source
routing.
Indexes
ctBridgeSrPortPairSrcPort ctBridgeSrPortPairDestPort
Column Syntax OID
ctBridgeSrPortPairSrcPort mandatory
The source port (ie the port which received the packets)
for which this entry has source routing information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.3.1.1.1
ctBridgeSrPortPairDestPort mandatory
The destination port (ie the port which transmitted the
packets) for which this entry has source routing information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.3.1.1.2
ctBridgeSrPortPairPackets mandatory
The number of packets forward by the source route bridge
from the SrcPort to the DestPort.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.3.3.1.1.3
ctBridgeSrPortPairState mandatory
The state of source route bridging on this port pair.
This is the desired state of the administrator. The
operational state of the port pair is determined by this
state along with the states of dot1dStpPortState wit…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.3.1.1.4

ctBridgeTpPortPairTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.4.1 · 1 row entry · 4 columns
Open in standard view 
A table containing information of source and
destination port pairs for transparent MAC briding.
ctBridgeTpPortPairEntry entry .1.3.6.1.4.1.52.4.1.2.3.4.1.1
An entry consisting of objects specifying information
for the source and destination port pairs used for
transparent bridging.
Indexes
ctBridgeTpPortPairSrcPort ctBridgeTpPortPairDestPort
Column Syntax OID
ctBridgeTpPortPairSrcPort mandatory
The source port (ie the port which received the packets)
for which this entry has transparent bridge information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.4.1.1.1
ctBridgeTpPortPairDestPort mandatory
The destination port (ie the port which the packets
were transmitted out) for which this entry has
transparent bridge information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.4.1.1.2
ctBridgeTpPortPairPackets mandatory
The number of packets transparently forwarded by the bridge
from the SrcPort to the DestPort.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.3.4.1.1.3
ctBridgeTpPortPairState mandatory
The state of transparent bridging on this port pair.
This is the desired state of the administrator. The
operational state of the port pair is determined by this
state along with the states of dot1dStpPortState within
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.4.1.1.4

ctBridgeSdbEnetTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.5.3 · 1 row entry · 4 columns
Open in standard view 
A table containing filtering information configured into
the bridge by (local or network) management specifying
the specific packet string (destination address, source 
address, type/length field as well as a window of 64 bytes 
of packet data beginning at a data offset) to be used 
for filtering decisions.  The filters are to be searched in
the order of incrementing filter number.
ctBridgeSdbEnetEntry entry .1.3.6.1.4.1.52.4.1.2.3.5.3.1
Filtering information which extends the filtering
capability of IEEE 802.1d.
Indexes
ctBridgeSdbEnetFtrNo
Column Syntax OID
ctBridgeSdbEnetFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.5.3.1.1
ctBridgeSdbEnetState mandatory
The state of the filter for which this entry contains
filtering information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.5.3.1.2
ctBridgeSdbEnetFtrData mandatory
The specific packet string representing the
destination address, source address, type/length
field and a window of 64 bytes of packet data
beginning at DataOffset to be used for filtering
decisions. Each ASCII charac…
OctetStringr/w
Constraints:
range: 0-78
 .1.3.6.1.4.1.52.4.1.2.3.5.3.1.3
ctBridgeSdbEnetDataOffset mandatory
The offset into a packet from which the bridge begins
its filtering decisions on the 64 byte data window. The
value '0' indicates that the window begins at the first
byte after the Ethernet MAC header. The largest valu…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.5.3.1.4

ctBridgeSdbEnetIOTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.5.4 · 1 row entry · 4 columns
Open in standard view 
A table containing the set of ports to which
frames received from specific ports and containing the
specific packet string (destination address, source address,
type/length field as well as a window of 64 bytes of
packet data beginning at a data offset) of the corresponding 
filter number of SdbEnetTable are allowed to be forwarded. 
The value of '0' in this table as the RcvPort is used to
specify all ports which are not already specified in this 
table for a particular entry.
ctBridgeSdbEnetIOEntry entry .1.3.6.1.4.1.52.4.1.2.3.5.4.1
The set of ports to which frames received by the RcvPort
and containing the specific packet string of the
corresponding filter number of SdbEnetTable are allowed
to be forwarded.
Indexes
ctBridgeSdbEnetIOFtrNo ctBridgeSdbEnetIORcvPort
Column Syntax OID
ctBridgeSdbEnetIOFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.5.4.1.1
ctBridgeSdbEnetIORcvPort mandatory
Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of
'0' indicates that this entry applies on all ports of
the br…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.5.4.1.2
ctBridgeSdbEnetIOAllowedToGoTo mandatory
The set of ports to which frames received from a
specific port and containing the specific packet
string of the corresponding filter number are allowed
to be forwarded. Each octet within the value of this
object specif…
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.3.5.4.1.3
ctBridgeSdbEnetIODelEntry mandatory
Writing a '1' to this object deletes this entry from the
Ethernet special database. This object will always return
a '1' when read.
Enumerationr/w
Enumerated Values:
1deleteEntry
 .1.3.6.1.4.1.52.4.1.2.3.5.4.1.4

ctBridgeSdbTrTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.6.3 · 1 row entry · 4 columns
Open in standard view 
A table containing filtering information configured into
the bridge by (local or network) management specifying
the specific packet string (AC, FC, destination address, 
source address, as well as a window of 64 bytes of packet 
data beginning at a data offset) to be used for filtering
decisions.  The filters are to be searched in the order of
incrementing filter number.
ctBridgeSdbTrEntry entry .1.3.6.1.4.1.52.4.1.2.3.6.3.1
Filtering information which extends the filtering
capability of IEEE 802.1d.
Indexes
ctBridgeSdbTrFtrNo
Column Syntax OID
ctBridgeSdbTrFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.6.3.1.1
ctBridgeSdbTrState mandatory
The state of the filter for which this entry contains
filtering information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.6.3.1.2
ctBridgeSdbTrFtrData mandatory
The specific packet string consisting of the AC, FC,
destination address, source address, and a window of
64 bytes of packet data beginning at DataOffset
to be used for filtering decisions. Each ASCII
character of th…
OctetStringr/w
Constraints:
range: 0-78
 .1.3.6.1.4.1.52.4.1.2.3.6.3.1.3
ctBridgeSdbTrDataOffset mandatory
The offset into a packet from which the bridge begins
its filtering decisions on the 64 byte data window. The
value '0' indicates that the window begins at the first
byte after the Token Ring MAC header. The largest va…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.6.3.1.4

ctBridgeSdbTrIOTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.6.4 · 1 row entry · 4 columns
Open in standard view 
A table containing the set of ports to which frames 
received from specific ports and containing the specific
packet string (AC, FC, destination address, source address,
as well as a window of 64 bytes of packet data beginning 
at a data offset) of the corresponding filter number of 
SdbTrTable are allowed to be forwarded.  The value of '0' 
in this table as the RcvPort is used to specify all ports
which are not already specified in this table for a 
particular entry.
ctBridgeSdbTrIOEntry entry .1.3.6.1.4.1.52.4.1.2.3.6.4.1
The set of ports to which frames received by the RcvPort
and containing the specific packet string of the
corresponding filter number of SdbTrTable are allowed
to be forwarded.
Indexes
ctBridgeSdbTrIOFtrNo ctBridgeSdbTrIORcvPort
Column Syntax OID
ctBridgeSdbTrIOFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.6.4.1.1
ctBridgeSdbTrIORcvPort mandatory
Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of
'0' indicates that this entry applies on all ports of
the br…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.6.4.1.2
ctBridgeSdbTrIOAllowedToGoTo mandatory
The set of ports to which frames received from a
specific port and containing the specific packet
string of the corresponding filter number are allowed
to be forwarded. Each octet within the value of this
object specif…
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.3.6.4.1.3
ctBridgeSdbTrIODelEntry mandatory
Writing a '1' to this object deletes this entry from the
Token Ring special database. This object will always return
a '1' when read.
Enumerationr/w
Enumerated Values:
1deleteEntry
 .1.3.6.1.4.1.52.4.1.2.3.6.4.1.4

ctBridgeTransTrEnetIBMTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.7.7 · 1 row entry · 3 columns
Open in standard view 
A table containing SAP (Service Access Point) values of 
IBM protocols that the bridge will translate from Token Ring 
(802.5 w/o snap) to Ethernet.
ctBridgeTransTrEnetIBMEntry entry .1.3.6.1.4.1.52.4.1.2.3.7.7.1
This entry contains the SAP value of an IBM protocol
that is to be translated to Ethernet. The value of the
Ethernet type field used in the translation is 80D5.
Only SAP values whose entry is enabled will be translated
…
Indexes
ctBridgeTransTrEnetIBMIndex
Column Syntax OID
ctBridgeTransTrEnetIBMIndex mandatory
The index of an entry in the Token Ring to Ethernet Translation
table for IBM protocols. The index ranges from 1 to 20.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.7.7.1.1
ctBridgeTransTrEnetIBMSap mandatory
The SAP value of an IBM protocol. The bridge will translate
all Token Ring/802.5 packets without a snap header having
this SAP value to Ethernet packets with the Ethernet type
field set to 80D5. The SAP value is one oc…
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.3.7.7.1.2
ctBridgeTransTrEnetIBMState mandatory
The state of this entry. A value of 2 indicates that this
entry will not be used in the bridge's translation decisions.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.7.7.1.3

ctBridgeTransTrEnetSnapTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.7.9 · 1 row entry · 3 columns
Open in standard view 
A table containing Ethernet type field entries that the 
bridge will use to determine how to translate a Token Ring 
(802.5 w/snap) packet to a CSMA/CD packet. If a received 
Token Ring packet matches the Ethernet type field of an 
enabled entry, the bridge will translate the Token Ring
packet to the frame format specified by
ctBridgeTransTrEnetSnapFormat. Else, it will translate the
packet to the opposite frame format.
ctBridgeTransTrEnetSnapEntry entry .1.3.6.1.4.1.52.4.1.2.3.7.9.1
This entry contains an Ethernet type field value and its
associated state.
Indexes
ctBridgeTransTrEnetSnapIndex
Column Syntax OID
ctBridgeTransTrEnetSnapIndex mandatory
The index of an entry in the Token Ring to Ethernet Translation
table for Ethernet type fields. The index ranges from 1 to 20.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.7.9.1.1
ctBridgeTransTrEnetSnapType mandatory
The Ethernet type field value which the bridge will translate
all Token Ring/802.5 packets with a snap header having
this type to the format specified by
ctBridgeTransTrEnetSnapFormat. The Ethernet type field value
is…
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.3.7.9.1.2
ctBridgeTransTrEnetSnapState mandatory
The state of this entry. A value of 2 indicates that this
entry will not be used in the bridge's translation decisions.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.7.9.1.3

ctBridgeSdbGenericTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.9.3 · 1 row entry · 5 columns
Open in standard view 
A table containing filtering information configured into
the bridge by (local or network) management specifying
the specific packet string (destination address, source 
address, type/length field as well as a window of 64 bytes 
of packet data beginning at a data offset) to be used 
for filtering decisions.  The filters are to be searched in
the order of incrementing filter number.
ctBridgeSdbGenericEntry entry .1.3.6.1.4.1.52.4.1.2.3.9.3.1
Filtering information which extends the filtering
capability of IEEE 802.1d.
Indexes
ctBridgeSdbGenericFtrNo
Column Syntax OID
ctBridgeSdbGenericFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.9.3.1.1
ctBridgeSdbGenericState mandatory
The state of the filter for which this entry contains
filtering information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.9.3.1.2
ctBridgeSdbGenericFtrData mandatory
The specific packet string representing the
destination address, source address, type/length
field and a window of 64 bytes of packet data
beginning at DataOffset to be used for filtering
decisions. Each ASCII charac…
OctetStringr/w
Constraints:
range: 0-78
 .1.3.6.1.4.1.52.4.1.2.3.9.3.1.3
ctBridgeSdbGenericDataOffset mandatory
The offset into a packet from which the bridge begins
its filtering decisions on the 64 byte data window. The
value '0' indicates that the window begins at the first
byte after the Generic MAC header. The largest value…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.9.3.1.4
ctBridgeSdbGenericFilterType mandatory
This object specifies the type of media for which this
special filter entry applies. The value of this object
is a bit encoding which allows for multiple medias to
share the same filter. The bit numbers are defined as…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.9.3.1.5

ctBridgeSdbGenericIOTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.9.4 · 1 row entry · 4 columns
Open in standard view 
A table containing the set of ports to which
frames received from specific ports and containing the
specific packet string (destination address, source address,
type/length field as well as a window of 64 bytes of
packet data beginning at a data offset) of the corresponding 
filter number of SdbGenericTable are allowed to be forwarded. 
The value of '0' in this table as the RcvPort is used to
specify all ports which are not already specified in this 
table for a particular entry.
ctBridgeSdbGenericIOEntry entry .1.3.6.1.4.1.52.4.1.2.3.9.4.1
The set of ports to which frames received by the RcvPort
and containing the specific packet string of the
corresponding filter number of SdbGenericTable are allowed
to be forwarded.
Indexes
ctBridgeSdbGenericIOFtrNo ctBridgeSdbGenericIORcvPort
Column Syntax OID
ctBridgeSdbGenericIOFtrNo mandatory
The Filter number for which this entry contains
filtering information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.9.4.1.1
ctBridgeSdbGenericIORcvPort mandatory
Either the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of
'0' indicates that this entry applies on all ports of
the br…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.9.4.1.2
ctBridgeSdbGenericIOAllowedToGoTo mandatory
The set of ports to which frames received from a
specific port and containing the specific packet
string of the corresponding filter number are allowed
to be forwarded. Each octet within the value of this
object specif…
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.3.9.4.1.3
ctBridgeSdbGenericIODelEntry mandatory
Writing a '1' to this object deletes this entry from the
Generic special database. This object will always return
a '1' when read.
Enumerationr/w
Enumerated Values:
1deleteEntry
 .1.3.6.1.4.1.52.4.1.2.3.9.4.1.4

ctBridgeLoadShareInstanceTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.10.1 · 1 row entry · 3 columns
Open in standard view 
A list of load share instance objects.
ctBridgeLoadShareInstanceEntry entry .1.3.6.1.4.1.52.4.1.2.3.10.1.1
A list of objects for a particular load share instance.
Indexes
ctBridgeLoadShareInstanceId
Column Syntax OID
ctBridgeLoadShareInstanceId mandatory
Returns the instance for a load share member in the
table of load share instances.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.1.1.1
ctBridgeLoadShareAdminStatus mandatory
The administrative state of load sharing for this instance.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.10.1.1.2
ctBridgeLoadShareOperStatus mandatory
The operational status of load sharing for this instance.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.10.1.1.3

ctBridgeLoadSharePortTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.3.10.2 · 1 row entry · 7 columns
Open in standard view 
A list of load share port objects.
ctBridgeLoadSharePortEntry entry .1.3.6.1.4.1.52.4.1.2.3.10.2.1
A load share port entry containing objects pertaining to
a particular load share port.
Indexes
ctBridgeLoadSharePortInstanceId ctBridgeLoadSharePortNum
Column Syntax OID
ctBridgeLoadSharePortNum mandatory
Returns the port number of a member port belonging to a
load share instance.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.1
ctBridgeLoadSharePortInstanceId mandatory
A unique value indentifying a member instance in the table
of load share instances. This value is similar to
ctBridgeLoadShareInstanceId.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.2
ctBridgeLoadSharePortAdminStatus mandatory
The administrative state of the port associated with
this instance of load share.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.3
ctBridgeLoadSharePortOperStatus mandatory
The operational state of the port associated with
this instance of load share.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.4
ctBridgeLoadSharePortForwardMask mandatory
The Mask used to foward unknown packets on.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.5
ctBridgeLoadSharePortForwardInstance mandatory
The instance that the ctLoadSharePortFowardMask
is running on for this ctLoadSharePortNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.6
ctBridgeLoadSharePortNumPorts mandatory
Displays the number of SmartTrunk ports in this redundant path.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.3.10.2.1.7