CT-ELS100-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
49

kxswFilesetTable

table mandatory
.1.3.6.1.4.1.97.8.2.2 · 1 row entry · 8 columns
Open in standard view 
A list of the software file sets stored. The first
file set refers to the one that was used when ELS-100
last booted. The second file set refers to the one
which will be used when ELS-100 reboots or reloads any
hardware module.
kxswFilesetEntry entry .1.3.6.1.4.1.97.8.2.2.1
A set of objects for each file set.
Indexes
No indexes recorded
Column Syntax OID
kxswIndex mandatory
The file set number, beginning with 1 for the first
file set. This number always matches the instance of
the swFiles. For example, {swIndex 2} contains the
value '2'.
Enumeration .1.3.6.1.4.1.97.8.2.2.1.1
kxswDesc mandatory
The description (0-255 bytes) of the software file
set.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.8.2.2.1.2
kxswCount mandatory
The number of files in the file set. This number may
range from 1 to 255.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.2.2.1.3
kxswType mandatory
The types of the files within the file set.
OctetString .1.3.6.1.4.1.97.8.2.2.1.4
kxswSizes mandatory
An array (4 octets per file), containing the size of
each of the files. Each size is encoded as a series
of 4 bytes, which should be converted into a 32 bit
integer.
OctetString .1.3.6.1.4.1.97.8.2.2.1.5
kxswStarts mandatory
An array (4 octets per file), containing the
software's execution starting address of each of the
files. Each address is encoded as a series of 4 bytes,
which should be converted into a 32 bit integer.
OctetString .1.3.6.1.4.1.97.8.2.2.1.6
kxswBases mandatory
An array (4 octets per file), containing the
software's base loading address of each of the
files. Each address is encoded as a series of 4 bytes,
which should be converted into a 32 bit integer.
OctetString .1.3.6.1.4.1.97.8.2.2.1.7
kxswFlashBank mandatory
The bank number where the software file set resides.
Enumeration .1.3.6.1.4.1.97.8.2.2.1.8

kxifTable

table mandatory
.1.3.6.1.4.1.97.8.6.1 · 1 row entry · 9 columns
Open in standard view 
A list of interface entries; one per port.
kxifEntry entry .1.3.6.1.4.1.97.8.6.1.1
A set of objects for an interface entry.
Indexes
No indexes recorded
Column Syntax OID
kxifIndex mandatory
The port number, beginning with 1 for the first
port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.1
kxifRxCnt mandatory
The number of small data buffers for receiving
packets.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.2
kxifTxCnt mandatory
The maximum size of the port's transmit queue, i.e.,
the number of packets that can be in the port's
transmit queue, waiting to be transmitted.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.3
kxifThreshold mandatory
Maximum number of combined receive and transmit
packet hardware errors before an alarm should be
generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.4
kxifThresholdTime mandatory
The time period (in seconds) to which kxifThreshold
applies. A value of zero will disable the
kxifThreshold alarm.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.5
kxifRxQueueThresh mandatory
Maximum number of receive packet queue overflow
errors before an alarm should be generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.6
kxifRxQueueThreshTime mandatory
The time period (in seconds) to which
kxifRxQueueThresh applies. A value of zero will
disable the kxifRxQueueThresh alarm.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.7
kxifFunction mandatory
The current functional state (protocols which have
been activated and are operational) of the port. The
following values or combinations are supported:
0x0001 NMS, 0x0002 TBRIDGE, 0x0020 UNIT_NO_BPDU
0x0040…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.6.1.1.8
kxifStatisticsTime mandatory
Length of time during which statistics were collected.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.8.6.1.1.9

kxuartTable

table mandatory
.1.3.6.1.4.1.97.8.7.1 · 1 row entry · 4 columns
Open in standard view 
A list of interface entries; one per UART port.
kxuartEntry entry .1.3.6.1.4.1.97.8.7.1.1
A set of objects for an interface entry.
Indexes
No indexes recorded
Column Syntax OID
kxuartIndex mandatory
The ELS-100's port number of the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.7.1.1.1
kxuartBaud mandatory
This is the desired baud rate. Only 1200 baud
through 19,200 baud are supported by the ELS-100.
Enumerationr/w .1.3.6.1.4.1.97.8.7.1.1.2
kxuartAlignmentErrors mandatory
Number of received packets with frame alignment
errors, since the port was last enabled.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.8.7.1.1.3
kxuartOverrunErrors mandatory
Number of received packets with data overrun errors,
since the port was last enabled.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.8.7.1.1.4

kxprotoTable

table mandatory
.1.3.6.1.4.1.97.8.8.1 · 1 row entry · 5 columns
Open in standard view 
This table contains configuration information
specifying the types of protocols used to bridge
and filter frames for each port.
kxprotoEntry entry .1.3.6.1.4.1.97.8.8.1.1
Each entry in this table specifies which protocols are
used by a particular port in the SmartStack.
Indexes
No indexes recorded
Column Syntax OID
kxprotoIfIndex mandatory
Identifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.8.1.1.1
kxprotoBridge mandatory
Defines the bridging method to be applied to frames
received at, or destined for, this port. Ports may be
configured for transparent or none. The UART may only
be configured to none.
Enumerationr/w .1.3.6.1.4.1.97.8.8.1.1.2
kxprotoSuppressBpdu mandatory
Allows transmission of spanning tree protocol packets
to be suppressed. If normal(1), 802.1d spanning tree
packets are transmitted as usual. If suppressed(2),
these packets are not transmitted. This option may be
neede…
Enumerationr/w .1.3.6.1.4.1.97.8.8.1.1.3
kxprotoRipListen mandatory
Specifies whether the port should listen for internet
Routing Information Protocol (RFC-1058) packets, in
order to build the routing table for the unit.
Enumerationr/w .1.3.6.1.4.1.97.8.8.1.1.4
kxprotoTrunking mandatory
Specifies whether SmartStack trunking protocol (an
extension to the standard Spanning Tree) is to be
used over this port.
Enumerationr/w .1.3.6.1.4.1.97.8.8.1.1.5

kxtrunkTable

table mandatory
.1.3.6.1.4.1.97.8.9.1 · 1 row entry · 8 columns
Open in standard view 
This table describes the trunking status and attributes of
the interfaces that are configured for bridge trunking.
kxtrunkEntry entry .1.3.6.1.4.1.97.8.9.1.1
An entry exists in this table for each physical interface
(port) that is configured for trunking.
Indexes
No indexes recorded
Column Syntax OID
kxtrunkIfIndex mandatory
Identifies a physical interface (port) which is
configured for LAN trunking. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.9.1.1.1
kxtrunkState mandatory
If off(1) then this link has not been enabled for
trunking. If closed(2) then this link has not yet
received any Trunking PDUs. If oneway(3) then incoming
Trunking PDUs do not indicate that our PDUs are being
successful…
Enumeration .1.3.6.1.4.1.97.8.9.1.1.2
kxtrunkRemoteBridgeAddr mandatory
The MAC address portion of the bridge ID of the remote
bridge.
OctetString .1.3.6.1.4.1.97.8.9.1.1.3
kxtrunkRemoteIp mandatory
The IP address of the remote bridge, as reported by that
bridge for administrative purposes.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.8.9.1.1.4
kxtrunkLastError mandatory
The last reason for failure when the link is in closed,
oneway, or helddown state.
Enumeration .1.3.6.1.4.1.97.8.9.1.1.5
kxtrunkLinkOrdinal mandatory
The position of this link within the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.9.1.1.6
kxtrunkLinkCount mandatory
The number of links within the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.9.1.1.7
kxtrunkLastChange mandatory
The number of seconds since kxtrunkState changed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.9.1.1.8

kxWorkGroupTable

table mandatory
.1.3.6.1.4.1.97.8.10.4 · 1 row entry · 4 columns
Open in standard view 
This table contains work group definitions for the
interfaces.
kxWorkGroupEntry entry .1.3.6.1.4.1.97.8.10.4.1
Each entry in this table contains a definition of a
work group.
Indexes
No indexes recorded
Column Syntax OID
kxWorkGroupNumber mandatory
An integer that identifies the work group, used as an
index to this table.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.10.4.1.1
kxWorkGroupName mandatory
A 1-16 character work group name.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.8.10.4.1.2
kxWorkGroupPorts mandatory
A list of all ports within the group. The first
octet specified ports 1-8, the second 9-16, etc.
OctetStringr/w .1.3.6.1.4.1.97.8.10.4.1.3
kxWorkGroupType mandatory
The type of work group: all - no additional
information needs to be supplied.
Enumerationr/w .1.3.6.1.4.1.97.8.10.4.1.4

kxtrapControlTable

table mandatory
.1.3.6.1.4.1.97.8.11.1 · 1 row entry · 4 columns
Open in standard view 
This table contains information about the severity of
each trap and whether the trap is currently enabled.
kxtrapControlEntry entry .1.3.6.1.4.1.97.8.11.1.1
Indexes
No indexes recorded
Column Syntax OID
kxtrapIndex mandatory
The specific trap number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.11.1.1.1
kxtrapEnabled mandatory
Enable or disable the generation of this trap.
Enumerationr/w .1.3.6.1.4.1.97.8.11.1.1.2
kxtrapSeverity mandatory
A user-definable severity, indicating the importance
of the trap.
Enumerationr/w .1.3.6.1.4.1.97.8.11.1.1.3
kxtrapText mandatory
A description of the trap.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.8.11.1.1.4

kxtrapSeverityControlTable

table mandatory
.1.3.6.1.4.1.97.8.11.2 · 1 row entry · 2 columns
Open in standard view 
This table contains information about whether a class
of traps of a particular severity is enabled or
disabled.
kxtrapSeverityControlEntry entry .1.3.6.1.4.1.97.8.11.2.1
Indexes
No indexes recorded
Column Syntax OID
kxtrapSeverityControlSeverity mandatory
A user-definable severity, indicating the importance
of the trap.
Enumerationr/w .1.3.6.1.4.1.97.8.11.2.1.1
kxtrapSeverityEnable mandatory
Enable or disable all traps of a given severity
level.
Enumerationr/w .1.3.6.1.4.1.97.8.11.2.1.2

kxtrapTable

table mandatory
.1.3.6.1.4.1.97.8.11.7 · 1 row entry · 5 columns
Open in standard view 
This table contains the latest traps that have been
generated.
kxtrapEntry entry .1.3.6.1.4.1.97.8.11.7.1
Indexes
No indexes recorded
Column Syntax OID
kxtrapEntryIndex mandatory
A number representing the order in which the trap
occurred in time. This 32 bit number can wrap.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.11.7.1.1
kxtrapEntryTimeStamp mandatory
The time at which the trap occurred.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.8.11.7.1.2
kxtrapEntryText mandatory
A description of the trap.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.8.11.7.1.3
kxtrapEntryNumber mandatory
The specific trap number, as specified in the TRAP
PDU.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.8.11.7.1.4
kxtrapEntrySeverity mandatory
A user-definable severity, indicating the importance
of the trap.
Enumeration .1.3.6.1.4.1.97.8.11.7.1.5