Server Manager board failure.
          
The Insight Agent has detected a failure of the Compaq Server 
Manager/R board in the server.

Server Manager board reset.
          
The Insight Agent has detected a reset of the Server Manager/R
board in the server.

Threshold exeeded on Server Manager monitored item.
          
The Insight Agent has detected a monitored item on the Server 
Manager board exceeding a threshold when alerting is
enabled for the monitored item.

Server Manager asynchronous communications failure.
          
The Insight Agent has detected a failure in the Server Manager 
board's asynchronous communication system.

Server Manager battery failure.
          
The Insight Agent has detected a failure in the Server Manager 
board's onboard battery.

Server Manager board time-out.
          
The Insight Agent has detected a time-out of the Server
Manager board as reported by the Server Manager Board driver.

Alert destination blacklisted.
          
The Server Manager board modem has blacklisted an alert 
destination phone number.  Once blacklisted, that alert 
destination is no longer available for use as an alert 
destination.  Blacklisting, which only occurs in 
international modems, is a requirement imposed by certain 
European countries on modems, to prevent a phone number 
from being dialed multiple times without getting a connection.  
The number of attempts required to have blacklisting occur,
 vary from country to country.  Once an alert destination has 
 been blacklisted, the only way to remove the blacklisted phone 
 number is to remove power from the modem.  
 On external modems this is a trival task.  When a blacklisting
 occurs on the Server Manager board's internal modem the
 task is slightly more difficult as the modem gets power 
 from the Server Manager board.  
 To remove power from the Server Manager board's internal modem,
 the Server Manager board must be forced into Dormant Mode.
 This is an operating mode, used to conserve battery life,
 which is entered automatically if the board looses power.
 To cause the board to enter Dormant Mode, the following
 steps should be performed:
   1) Disable alerting via CPQCAUI.NLM.
   2) Disable async communication via CPQCAUI.NLM.
   3) Down the server.
   4) Exit to DOS (if applicable).
   5) Shut power off to the computer.
   6) Wait 5 minutes before restoring power.
 Once the 5 minutes has expired, and power to the computer
 has been restored, the modem will have flushed its
 blacklist, and the board's alerting functions will work
 as expected.