COLUBRIS-PUBLIC-ACCESS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
44

publicAccessUsersConfigTable

table
.1.3.6.1.4.1.8744.5.1.1.3.5 · 1 row entry · 9 columns
Open in standard view 
Provides information on the user's authentication
method. In tabular form to allow multiple instances on an
agent.
publicAccessUsersConfigEntry entry .1.3.6.1.4.1.8744.5.1.1.3.5.1
An entry in the table.
Indexes
publicAccessUsersConfigIndex
Column Syntax OID
publicAccessUsersConfigIndex
Index of a user profile in the publicAccessUsersConfigTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.1
publicAccessUsersConfigAuthenType
Indicates the mechanism used to authenticate users.
COLUBRIS-TCColubrisUsersAuthenticationType
Textual Convention: COLUBRIS-TCColubrisUsersAuthenticationType Enumeration
Type Values:
1mac
2ieee802dot1x
3html
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.2
publicAccessUsersConfigAuthenMode
Specifies how the user authentication is performed. It can
be done with the local user list or via a AAA server profile.
If both are enabled, the local user list is checked first.
COLUBRIS-TCColubrisUsersAuthenticationMode
Textual Convention: COLUBRIS-TCColubrisUsersAuthenticationMode Enumeration
Type Values:
0none
1local
2profile
3localAndProfile
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.3
publicAccessUsersConfigAuthenProfileIndex
Specifies the AAA profile to use for user authentication when
publicAccessUsersAuthenMode is set to 'profile' or 'localAndProfile'.
COLUBRIS-TCColubrisProfileIndexOrZero
Textual Convention: COLUBRIS-TCColubrisProfileIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.4
publicAccessUsersConfigAuthenTimeout
Logins are refused if the AAA server does not respond
within this time period. Only applies when
coVirtualApUserAccessAuthenMode is set to 'profile' or
'localAndProfile' and when the users are authenticated via
'HTML' o…
secondsUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.5
publicAccessUsersConfigAccountingEnabled
Indicates if accounting information is generated by the
device and sent to the AAA server for public access users.
Accounting information is generated only if a valid AAA
server profile is configured for
publicAccessUse…
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.6
publicAccessUsersConfigAccountingProfileIndex
Identifies the AAA profile to send accounting to for
public access users. When zero is specified, the
value set inside publicAccessDeviceAuthenProfileIndex
is used instead.
COLUBRIS-TCColubrisProfileIndexOrZero
Textual Convention: COLUBRIS-TCColubrisProfileIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.7
publicAccessUsersConfigInterfaceIndex
Indicates the local interface on which these configuration
parameters apply. This attribute is used with the
publicAccessUsersConfigVirtualApProfileIndex to uniquely
identify an entry in Virtual AP indexed tables.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.8
publicAccessUsersConfigVirtualApProfileIndex
Indicates a user's VAP profile currently associated
with these configuration parameters. This attribute is used
with the publicAccessUsersConfigInterfaceIndex to uniquely
identify an entry in Virtual AP indexed tables.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.5.1.9

publicAccessUserTable

table
.1.3.6.1.4.1.8744.5.1.1.3.6 · 1 row entry · 33 columns
Open in standard view 
A table containing specific information for users authenticated
by the authentication system. In tabular form to allow
multiple instances on an agent.
publicAccessUserEntry entry .1.3.6.1.4.1.8744.5.1.1.3.6.1
Information about a particular user that has been authenticated
by the authentication system.
publicAccessUserIndex - Uniquely identifies a user in the
table.
Indexes
publicAccessUserIndex
Column Syntax OID
publicAccessUserIndex
Index of a user in the publicAccessUserTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.1
publicAccessUserAuthenType
Indicates the mechanism used to authenticate the user.
COLUBRIS-TCColubrisUsersAuthenticationType
Textual Convention: COLUBRIS-TCColubrisUsersAuthenticationType Enumeration
Type Values:
1mac
2ieee802dot1x
3html
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.2
publicAccessUserAuthenMode
Specifies how user authentication is performed. It can
be done using a local user list defined on the device
or AAA server profile. If both modes are active the local
user list is checked first.
COLUBRIS-TCColubrisUsersAuthenticationMode
Textual Convention: COLUBRIS-TCColubrisUsersAuthenticationMode Enumeration
Type Values:
0none
1local
2profile
3localAndProfile
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.3
publicAccessUserState
Indicates the current state of the user.
Enumeration
Enumerated Values:
0unassigned
1connecting
2connected
3reconnecting
4disconnecting
5disconnected
6disconnectingAdministrative
7disconnectedAdministrative
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.4
publicAccessUserStationIpAddress
Indicates the user's IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.5
publicAccessUserName
Indicates the user's name.
OctetString
Constraints:
range: 0-253
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.6
publicAccessUserSessionStartTime
Indicates when this user session was started.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.7
publicAccessUserSessionDuration
Indicates how long the user's session has been active.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.8
publicAccessUserIdleTime
Indicates for how long the user's session has been idle.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.9
publicAccessUserBytesSent
Indicates the total number of bytes sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.10
publicAccessUserBytesReceived
Indicates the total number of bytes received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.11
publicAccessUserPacketsSent
Indicates the total number of IP packets sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.12
publicAccessUserPacketsReceived
Indicates the total number of IP packets received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.13
publicAccessUserForceDisconnection
Setting this attribute to 'adminReset' disconnects
the user with a cause of ADMIN_RESET.
Reading this variable always return 'idle'.
Enumerationr/w
Enumerated Values:
0idle
1adminReset
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.14
publicAccessUserStationMacAddress
Indicates the user's MAC Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.15
publicAccessUserApMacAddress
Indicates the user's Access Point MAC Address when Location-
Aware is enabled or the Access Controller MAC Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.16
publicAccessUserGroupName
Indicates the user's Access Point Group Name (ONLY when
Location-aware is enabled and properly configured).
If this information is not available, a zero-Length
string is returned.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.17
publicAccessUserSSID
Indicates the user's Access Point SSID (ONLY when
Location-aware is enabled and properly configured).
If this information is not available, a zero-Length
string is returned.
COLUBRIS-TCColubrisSSIDOrNone
Textual Convention: COLUBRIS-TCColubrisSSIDOrNone OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.18
publicAccessUserSecurity
Specifies the user's security mode.
COLUBRIS-TCColubrisSecurity
Textual Convention: COLUBRIS-TCColubrisSecurity Enumeration
Type Values:
0unknown
1none
2wep
3ieee802dot1x
4ieee802dot1xWithWep
5wpa
6wpaPsk
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.19
publicAccessUserPHYType
Specifies the user's radio type.
Enumeration
Enumerated Values:
0unknown
1ieee802dot11a
2ieee802dot11b
3ieee802dot11g
4ieee802dot11n
5ieee802dot11ac
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.20
publicAccessUserVLAN
Specifies the VLAN currently assigned to the user.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.21
publicAccessUserApRadioIndex
Indicates the radio to which this user is associated.
The index 0 is reserved when location aware is not enabled
or not properly configured. It means that the system
could not determine on which interface the user is
co…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.22
publicAccessUserConfigIndex
Indicates the configuration profile in the
publicAccessUsersConfigTable currently associated with
this user. When location aware is not enabled or not properly
configured, the first SSID of the first radio interface
is …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.23
publicAccessUserConnectedInterface
Indicates the device's logical public interface to which
the user is connected. This will always be a string
containing 'br0'.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.24
publicAccessUserBytesSentDropped
Indicates the total number of bytes sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.25
publicAccessUserBytesReceivedDropped
Indicates the total number of bytes received for the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.26
publicAccessUserPacketsSentDropped
Indicates the total number of packets sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.27
publicAccessUserPacketsReceivedDropped
Indicates the total number of packets received for the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.28
publicAccessUserRateLimitationEnabled
Specifies if rate limitation is enabled for the user.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.29
publicAccessUserMaxTransmitRate
Specifies the maximum transmit rate for the user.
Integer32
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.30
publicAccessUserMaxReceiveRate
Specifies the maximum receive rate for the user.
Integer32
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.31
publicAccessUserBandwidthControlLevel
Specifies the user's bandwidth control level.
COLUBRIS-TCColubrisPriorityQueue
Textual Convention: COLUBRIS-TCColubrisPriorityQueue Enumeration
Type Values:
1low
2normal
3high
4veryHigh
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.32
publicAccessUserNASPort
Specifies the NAS-Port value assigned to the user.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8744.5.1.1.3.6.1.33

publicAccessNASPortTable

table
.1.3.6.1.4.1.8744.5.1.1.4.2 · 1 row entry · 2 columns
Open in standard view 
A table containing specific information for NAS-Port
by the Access Controller. In tabular form to allow
multiple instances on an agent.
publicAccessNASPortEntry entry .1.3.6.1.4.1.8744.5.1.1.4.2.1
Information about a particular NAS-Port
by Access Controller.
publicAccessNASPortIndex - Uniquely identifies a NAS-Port in the
table.
Indexes
publicAccessNASPortIndex
Column Syntax OID
publicAccessNASPortIndex
Index of a NAS-Port in the publicAccessNASPortTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8744.5.1.1.4.2.1.1
publicAccessNASPortUserName
Indicates the user's name currently authenticated
by the Access Controller on this NAS-Port.
OctetString
Constraints:
range: 0-253
 .1.3.6.1.4.1.8744.5.1.1.4.2.1.2