CM-SAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
106

satControlTable

table
.1.3.6.1.4.1.2544.1.12.28.1.1 · 1 row entry · 15 columns
Open in standard view 
A list of entries for the control of SAT Control.
satControlEntry entry .1.3.6.1.4.1.2544.1.12.28.1.1.1
A conceptual row in the satControlTable.
Indexes
CM-ENTITY-MIBneIndex satControlIndex
Column Syntax OID
satControlIndex
The index of the Service Activation Test.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.1
satControlName
The alias of the Service Activation Test.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.2
satControlTestMode
The mode of the Service Activation Test.
ServiceActivationTestModer/w
Textual Convention: ServiceActivationTestMode Enumeration
Type Values:
1oneWay
2twoWay
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.3
satControlTestProcedures
A List of Service Activation Test procedures.
SatProceduresListr/w
Textual Convention: SatProceduresList Bits
Type Values:
1configTestCir
2configTestEir
3configTestCbs
4configTestEbs
5configTestPolicing
6performance
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.4
satControlConfigTestDuration
The duration of CIR step test, expressed in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.5
satControlConfigCIRTestStepNum
The number of steps in CIR step test.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.6
satControlConfigCIRTestStepDuration
The duration of each CIR step test.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.7
satControlPerfTestDuration
The duration of the SAT Performance Test, expressed in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.8
satControlStatus
The overall SAT Control Test Status.
SatStatus
Textual Convention: SatStatus Enumeration
Type Values:
1completed
2notStarted
3inProgress
4failed
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.9
satControlAction
The start/stop action of the SAT Control.
SatTestActionr/w
Textual Convention: SatTestAction Enumeration
Type Values:
1start
2stop
3notApplicable
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.10
satControlStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.11
satControlRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.12
satControlFailCause
The information about the reason of the Test failure.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.13
satControlTestStartTime
The start time of this SAT Control.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.14
satControlFlpduTagOverride
Whether permit user to configure FLPDU explicitly.
Disabled: FLPDUs tag is inherited from SCM of MEP.
Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.1.1.15

satStreamTable

table
.1.3.6.1.4.1.2544.1.12.28.1.2 · 1 row entry · 46 columns
Open in standard view 
A list of entries for the control of SAT Streams.
satStreamEntry entry .1.3.6.1.4.1.2544.1.12.28.1.2.1
A conceptual row in the satStreamTable.
Indexes
CM-ENTITY-MIBneIndex satControlIndex satStreamIndex
Column Syntax OID
satStreamIndex
The index of the Service Activation Test Stream.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.1
satStreamName
The alias of the Service Activation Test Stream.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.2
satStreamTestPort
The related port of the Service Activation Test Stream.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.3
satStreamTestDirection
The direction of the Service Activation Test Stream.
SatDirectionr/w
Textual Convention: SatDirection Enumeration
Type Values:
1forward
2backward
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.4
satStreamDestMacAddress
This object describes the destination MAC address of FLPDU.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.5
satStreamFramePayloadType
The type of Payload of the Frame Loss PDU.
SatFramePayloadTyper/w
Textual Convention: SatFramePayloadType Enumeration
Type Values:
1prbs31
2custom
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.6
satStreamCustomFramePayload
This object describes the customized frame payload.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.7
satStreamFrameSizeList
This object describes a list of Frame Sizes used in FLPDU.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.8
satStreamSacProfileId
This object describes the related Service Acceptance Criteria (SAC) Profile Id.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.9
satStreamSrcMepId
This object describes the Local MEP related with SAT Test Stream.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.10
satStreamDestMepType
This object describes the type of Destination MEP, which can be based on MEP id or MAC Address.
CM-COMMON-MIBMepDestinationTyper/w
Textual Convention: CM-COMMON-MIBMepDestinationType Enumeration
Type Values:
0not-applicable
1mepid
2macaddress
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.11
satStreamDestMepId
This object describes the destination MEP id.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.12
satStreamDestMepMacAddr
This object describes the Destination MEP's MAC Address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.13
satStreamDmmPacketSize
This object describes the Delay Measurement Message (DMM) frame size.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.14
satStreamDmmPacketInterval
This object describes the Delay Measurement Message (DMM) frame generation interval.
CM-SA-MIBEsaProbePktIntervalTyper/w
Textual Convention: CM-SA-MIBEsaProbePktIntervalType Enumeration
Type Values:
0not-applicable
1interval-10ms
2interval-100ms
3interval-1sec
4interval-10sec
5interval-1min
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.15
satStreamOverallResult
This object describes the test result.
SatResult
Textual Convention: SatResult Enumeration
Type Values:
1none
2pass
3fail
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.16
satStreamAction
This object describes the operation on this test.
SatTestActionr/w
Textual Convention: SatTestAction Enumeration
Type Values:
1start
2stop
3notApplicable
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.17
satStreamStatus
This object describes the test status of this Test Stream.
SatStatus
Textual Convention: SatStatus Enumeration
Type Values:
1completed
2notStarted
3inProgress
4failed
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.18
satStreamCurrentTestProcedure
This object describes the current test procedure.
SatProceduresType
Textual Convention: SatProceduresType Enumeration
Type Values:
1none
2configTestCir
3configTestEir
4configTestCbs
5configTestEbs
6configTestPolicing
7performanceTest
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.19
satStreamCurrentConfigCirTestStep
This object describes the current step number of CIR Test.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.20
satStreamInner1VlanId
This object describes the Inner1 VLAN Id.
CM-COMMON-MIBVlanIdr/w
Textual Convention: CM-COMMON-MIBVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.21
satStreamInner1VlanPri
This object describes the Inner1 VLAN Priority.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.22
satStreamInner1VlanEnabled
This object describes whether the Inner1 VLAN enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.23
satStreamInner1ValnEtherType
This object describes the Inner2 VLAN EtherType.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.24
satStreamInner2VlanId
This object describes the Inner2 VLAN Id.
CM-COMMON-MIBVlanIdr/w
Textual Convention: CM-COMMON-MIBVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.25
satStreamInner2VlanPri
This object describes the Inner2 VLAN Priority.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.26
satStreamInner2VlanEnabled
This object describes whether the Inner2 VLAN enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.27
satStreamInner2VlanEtherType
This object describes whether the Inner2 VLAN ether type.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.28
satStreamOuterVlanId
This object describes the Outer VLAN Id.
CM-COMMON-MIBVlanIdr/w
Textual Convention: CM-COMMON-MIBVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.29
satStreamOuterVlanPri
This object describes the Outer VLAN Priority.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.30
satStreamOuterVlanEnabled
This object describes whether the Outer VLAN enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.31
satStreamOuterVlanEtherType
This object describes whether the Outer VLAN Ethertype.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.32
satStreamDeiEnabled
This object describes whether the DEI enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.33
satStreamGreenPcp
This object describes the PCP value for Green Packets.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.34
satStreamYellowPcp
This object describes the PCP value for Yellow Packets.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.35
satStreamColorMode
This object describes the color mode for Policing test.
CM-FACILITY-MIBPolicerColorModer/w
Textual Convention: CM-FACILITY-MIBPolicerColorMode Enumeration
Type Values:
1color-aware
2color-blind
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.36
satStreamCirLo
This object describes CIR low 32 bits.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.37
satStreamCirHi
This object describes CIR high 32 bits.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.38
satStreamEirLo
This object describes EIR low 32 bits.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.39
satStreamEirHi
This object describes EIR high 32 bits.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.40
satStreamCbs
This object describes CBS.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.41
satStreamEbs
This object describes CBS.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.42
satStreamStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.43
satStreamRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.44
satStreamDmmPktPriority
This object describes the Dmm packet priority.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.45
satStreamMFactor
The M factor is used in test result validation.
It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time.
Roughly, it equals to EBS/Test Duration, user should configure its value …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.2.1.46

satResultStatsTable

table
.1.3.6.1.4.1.2544.1.12.28.1.3 · 1 row entry · 30 columns
Open in standard view 
A list of entries for the control of SAT Result Statistics.
satResultStatsEntry entry .1.3.6.1.4.1.2544.1.12.28.1.3.1
A conceptual row in the satResultStatsTable.
Indexes
CM-ENTITY-MIBneIndex satControlIndex satStreamIndex satResultStatsTestType satResultStatsStepNumber
Column Syntax OID
satResultStatsTestType
The Test Type of the Service Activation Test.
SatProceduresType
Textual Convention: SatProceduresType Enumeration
Type Values:
1none
2configTestCir
3configTestEir
4configTestCbs
5configTestEbs
6configTestPolicing
7performanceTest
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.1
satResultStatsStepNumber
The Test step number of the Service Activation Test.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.2
satResultStatsSessionId
The session id of the Service Activation Test.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.3
satResultStatsStartTime
The start time of the Service Activation Test.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.4
satResultStatsEndTime
The end time of the Service Activation Test.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.5
satResultStatsStatus
The Status of the Service Activation Test.
SatStatus
Textual Convention: SatStatus Enumeration
Type Values:
1completed
2notStarted
3inProgress
4failed
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.6
satResultStatsResult
This object describes SAT whether pass.
SatResult
Textual Convention: SatResult Enumeration
Type Values:
1none
2pass
3fail
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.7
satResultStatsMinIRGMeasured
This object describes the minimum Information Rate (IR) for Green Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.8
satResultStatsAvgIRGMeasured
This object describes the average Information Rate (IR) for Green Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.9
satResultStatsMaxIRGMeasured
This object describes the maximum Information Rate (IR) for Green Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.10
satResultStatsMinIRYMeasured
This object describes the minimum Information Rate (IR) for Yellow Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.11
satResultStatsAvgIRYMeasured
This object describes the average Information Rate (IR) for Yellow Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.12
satResultStatsMaxIRYMeasured
This object describes the maximum Information Rate (IR) for Yellow Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.13
satResultStatsFlrGMeasured
This object describes the Frame Loss Ratio (FLR) for Green Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.14
satResultStatsFlrYMeasured
This object describes the Frame Loss Ratio (FLR) for Yellow Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.15
satResultStatsFlrGCounts
This object describes the Frame Loss (FL) count for Green Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.16
satResultStatsFlrYCounts
This object describes the Frame Loss (FL) count for Yellow Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.17
satResultStatsMinFTDGMeasured
This object describes the minimum Frame Transfer Delay (FTD) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.18
satResultStatsAvgFTDGMeasured
This object describes the average Frame Transfer Delay (FTD) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.19
satResultStatsMaxFTDGMeasured
This object describes the maximum Frame Transfer Delay (FTD) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.20
satResultStatsIMinFDVGMeasured
This object describes the minimum Frame Delay Variation (FDV) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.21
satResultStatsIAvgFDVGMeasured
This object describes the average Frame Delay Variation (FDV) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.22
satResultStatsIMaxFDVGMeasured
This object describes the maximum Frame Delay Variation (FDV) for Green Packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.23
satResultStatsISyncErrorsNum
The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.24
satResultStatsIfNegFLG
This object means whether negative green frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.25
satResultStatsIfNegFLY
This object means whether negative yellow frame loss.
True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected.
False: negative loss of yellow packets doesn't occur, which me…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.26
satResultStatsAvgIRT
This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.27
satResultStatsFlrTMeasured
This object describes the Frame Loss Ratio (FLR) for Total Packets.
No distinguish color, negative value means receiving much more packets than expected.
Only valid for color blind test.
If its value is 26000001, it mea…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.28
satResultStatsFlTCounts
This object describes the Frame Loss (FL) count for Total Packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.29
satResultStatsIfNegFLT
This object means whether negative total frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.3.1.30

satSacProfileTable

table
.1.3.6.1.4.1.2544.1.12.28.1.4 · 1 row entry · 7 columns
Open in standard view 
A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile.
satSacProfileEntry entry .1.3.6.1.4.1.2544.1.12.28.1.4.1
A conceptual row in the satSacProfileTable.
Indexes
satSacProfileIndex
Column Syntax OID
satSacProfileIndex
The index of SAT Service Acceptance Criteria (SAC) Profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.1
satSacProfileAlias
The alias of SAT Service Acceptance Criteria (SAC) Profile.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.2
satSacProfileFLR
The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.3
satSacProfileFTD
The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.4
satSacProfileFDV
The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.5
satSacProfileStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.6
satSacProfileRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.28.1.4.1.7

satResponderSessionTable

table
.1.3.6.1.4.1.2544.1.12.28.1.5 · 1 row entry · 6 columns
Open in standard view 
A list of entries for the control of SAT Responder Session.
satResponderSessionEntry entry .1.3.6.1.4.1.2544.1.12.28.1.5.1
A conceptual row in the satResponderSessionTable.
Indexes
CM-ENTITY-MIBneIndex satResponderSessionIndex
Column Syntax OID
satResponderSessionIndex
The index of the entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.1
satResponderSessionId
The id of active test session negotiated between SAT Responder and SAT Control.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.2
satResponderSessionControlMepMacAddr
This object describes the Control MEP's MAC Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.3
satResponderSessionMepId
The local MEP Id.
SNMPv2-TCVariablePointer
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.4
satResponderSessionStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.5
satResponderSessionRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.28.1.5.1.6

networkElementSatParamsTable

table
.1.3.6.1.4.1.2544.1.12.28.1.6 · 1 row entry · 1 columns
Open in standard view 
Entries may be auto discovered, or can be explicitly created by 
SNMP Manager.  Each remotely discovered shelf is represented as 
a row in this table.
networkElementSatParamsEntry entry .1.3.6.1.4.1.2544.1.12.28.1.6.1
A conceptual row in the networkElementSatParamsTable.
Indexes
No indexes recorded
Column Syntax OID
neSatParamsEtherType
This object describes the SAT System EtherType.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.28.1.6.1.1

satCfmMepExtTable

table
.1.3.6.1.4.1.2544.1.12.28.1.7 · 1 row entry · 1 columns
Open in standard view 
This objects describe the SAT responder whether enabled on the MEP.
satCfmMepExtEntry entry .1.3.6.1.4.1.2544.1.12.28.1.7.1
A conceptual row in the satCfmMepExtTable.
Indexes
No indexes recorded
Column Syntax OID
satCfmMepSatResponderEnabled
This objects describes the SAT Responder whether enabled on the MEP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.28.1.7.1.1