CISCOSB-vlan-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
42
Rows
42
Columns
143

vlanNameTable

table
.1.3.6.1.4.1.9.6.1.101.48.21 · 1 row entry · 3 columns
Open in standard view 
This table translates Vlan name to Vlan's tag and ifindex
vlanNameEntry entry .1.3.6.1.4.1.9.6.1.101.48.21.1
The row definition for this table.
Indexes
vlanNameName
Column Syntax OID
vlanNameName
The Vlan's name
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.6.1.101.48.21.1.1
vlanNameTag
The Vlan's tag
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.21.1.2
vlanNameIfIndex
The Vlan's ifindex
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.21.1.3

vlanPortModeTable

table
.1.3.6.1.4.1.9.6.1.101.48.22 · 1 row entry · 1 columns
Open in standard view 
This table hold information on port status trunk or access
vlanPortModeEntry entry .1.3.6.1.4.1.9.6.1.101.48.22.1
The row definition for this table.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeState
The port state, 1 is generic cli
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.22.1.1

vlanSpecialTagTable

table
.1.3.6.1.4.1.9.6.1.101.48.33 · 1 row entry · 2 columns
Open in standard view 
special vlan tag used for this port
vlanSpecialTagEntry entry .1.3.6.1.4.1.9.6.1.101.48.33.1
entry of special tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSpecialTagVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.33.1.1
vlanSpecialTagStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.33.1.2

vlanSpecialTagCurrentTable

table
.1.3.6.1.4.1.9.6.1.101.48.34 · 1 row entry · 3 columns
Open in standard view 
special Current vlan tag used for this port
vlanSpecialTagCurrentEntry entry .1.3.6.1.4.1.9.6.1.101.48.34.1
entry of Current special tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSpecialTagCurrentVID
specify the special vlan tag .
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.34.1.1
vlanSpecialTagCurrentReserved
specify if the special vlan tag is reserved .
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.34.1.2
vlanSpecialTagCurrentActive
specify if the special vlan tag is used .
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.34.1.3

vlanPrivateEdgeTable

table
.1.3.6.1.4.1.9.6.1.101.48.37 · 1 row entry · 2 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeEntry entry .1.3.6.1.4.1.9.6.1.101.48.37.1
entry of pve
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPrivateEdgeUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.6.1.101.48.37.1.1
vlanPrivateEdgeStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.37.1.2

vlanDynamicVlanTable

table
.1.3.6.1.4.1.9.6.1.101.48.39 · 1 row entry · 3 columns
Open in standard view 
table for DynamicVlan
vlanDynamicVlanEntry entry .1.3.6.1.4.1.9.6.1.101.48.39.1
entry of DynamicVlan
Indexes
vlanDynamicVlanMacAddress
Column Syntax OID
vlanDynamicVlanMacAddress
mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.6.1.101.48.39.1.1
vlanDynamicVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.39.1.2
vlanDynamicVlanStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.39.1.3

vlanPortModeExtTable

table
.1.3.6.1.4.1.9.6.1.101.48.40 · 1 row entry · 2 columns
Open in standard view 
This table hold information on port status trunk or access
vlanPortModeExtEntry entry .1.3.6.1.4.1.9.6.1.101.48.40.1
The row definition for this table.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeExtState
The ext
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.40.1.1
vlanPortModeExtStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.40.1.2

vlanPrivateTableOld

table
.1.3.6.1.4.1.9.6.1.101.48.42 · 1 row entry · 2 columns
Open in standard view 
table for PrivateVlan
vlanPrivateEntryOld entry .1.3.6.1.4.1.9.6.1.101.48.42.1
entry of PrivateVlan
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
vlanPrivateOldIsolatedVlanTag
vlan Tag
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.9.6.1.101.48.42.1.1
vlanPrivateOldStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.42.1.2

vlanPrivateCommunityTable

table
.1.3.6.1.4.1.9.6.1.101.48.43 · 1 row entry · 2 columns
Open in standard view 
table for PrivateVlan
vlanPrivateCommunityEntry entry .1.3.6.1.4.1.9.6.1.101.48.43.1
entry of PrivateVlan
Indexes
Q-BRIDGE-MIBdot1qVlanIndex vlanPrivateCommunityVlanTag
Column Syntax OID
vlanPrivateCommunityVlanTag
vlan Tag
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.43.1.1
vlanPrivateCommunityStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.43.1.2

vlanMulticastTvTable

table
.1.3.6.1.4.1.9.6.1.101.48.44 · 1 row entry · 2 columns
Open in standard view 
multicast vlan used for this port
vlanMulticastTvEntry entry .1.3.6.1.4.1.9.6.1.101.48.44.1
entry of multicast tag
Indexes
IF-MIBifIndex
Column Syntax OID
vlanMulticastTvVID
specify the TV vlan tag, vlan must exist .
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.44.1.1
vlanMulticastTvStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.44.1.2

vlanMacBaseVlanGroupTable

table
.1.3.6.1.4.1.9.6.1.101.48.45 · 1 row entry · 4 columns
Open in standard view 
A table that contains mappings from Range of MAC
addresses to Group Identifiers used for
MAC-based VLAN Classification.
vlanMacBaseVlanGroupEntry entry .1.3.6.1.4.1.9.6.1.101.48.45.1
A mapping from a Range of MAC addresses to a
Group Identifier.
Indexes
vlanMacBaseVlanMacAddress vlanMacBaseVlanMacMask
Column Syntax OID
vlanMacBaseVlanMacAddress
The base MAC address of the range.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.6.1.101.48.45.1.1
vlanMacBaseVlanMacMask
The Mask of the range.
The mask determains the leading '1' bits of the mask (MSB).
48 means single HOST and 9 means the widest range.
The MASK is limited to 9 to avoid entring ranges including
multicast addresses.
Integer32
Constraints:
range: 9-48
 .1.3.6.1.4.1.9.6.1.101.48.45.1.2
vlanMacBaseVlanGroupId
Represents a group of ranges of MAC addresses
that are associated together when assigning a
VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.6.1.101.48.45.1.3
vlanMacBaseVlanGroupRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.45.1.4

vlanMacBaseVlanPortTable

table
.1.3.6.1.4.1.9.6.1.101.48.46 · 1 row entry · 3 columns
Open in standard view 
A table that contains VID sets used for
MAC-based VLAN Classification.
vlanMacBaseVlanPortEntry entry .1.3.6.1.4.1.9.6.1.101.48.46.1
A VID set for a port and group.
Indexes
BRIDGE-MIBdot1dBasePort vlanMacBaseVlanPortGroupId
Column Syntax OID
vlanMacBaseVlanPortGroupId
Designates a group of Ranges in the ranges
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.6.1.101.48.46.1.1
vlanMacBaseVlanPortGroupVid
The VID associated with a group of range MAC addresses for
each port.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.46.1.2
vlanMacBaseVlanPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.46.1.3

vlanPrivateEdgeGroupTable

table
.1.3.6.1.4.1.9.6.1.101.48.47 · 1 row entry · 3 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeGroupEntry entry .1.3.6.1.4.1.9.6.1.101.48.47.1
entry of pve
Indexes
vlanPrivateEdgeGroupSource
Column Syntax OID
vlanPrivateEdgeGroupSource
specify the uplink group.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.6.1.101.48.47.1.1
vlanPrivateEdgeGroupUplink
specify the uplink port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.6.1.101.48.47.1.2
vlanPrivateEdgeGroupStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.47.1.3

vlanPrivateEdgeGroupIfIndexTable

table
.1.3.6.1.4.1.9.6.1.101.48.48 · 1 row entry · 2 columns
Open in standard view 
table for pve port and uplink
vlanPrivateEdgeGroupIfIndexEntry entry .1.3.6.1.4.1.9.6.1.101.48.48.1
entry of pve
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPrivateEdgeGroupIfIndexID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.6.1.101.48.48.1.1
vlanPrivateEdgeGroupIfIndexDomainID
specify the ifIndex group id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.6.1.101.48.48.1.2

vlanSubnetRangeTable

table
.1.3.6.1.4.1.9.6.1.101.48.49 · 1 row entry · 4 columns
Open in standard view 
A table that contains mappings from subnet
range to Group Identifiers used for
Port-and-subnet-based VLAN Classification.
vlanSubnetRangeEntry entry .1.3.6.1.4.1.9.6.1.101.48.49.1
A mapping from a subnet to a
Group Identifier.
Indexes
vlanSubnetRangeAddr vlanSubnetRangeMask
Column Syntax OID
vlanSubnetRangeAddr
The IP address of the range
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.6.1.101.48.49.1.1
vlanSubnetRangeMask
The numbers of continuous ones in the mask
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.6.1.101.48.49.1.2
vlanSubnetRangeGroupId
Represents a group of subnets that are associated
together when assigning a VID to a frame.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.6.1.101.48.49.1.3
vlanSubnetRangeRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.49.1.4

vlanSubnetPortTable

table
.1.3.6.1.4.1.9.6.1.101.48.50 · 1 row entry · 3 columns
Open in standard view 
A table that contains VID sets used for
Port-and-subnet-based VLAN Classification.
vlanSubnetPortEntry entry .1.3.6.1.4.1.9.6.1.101.48.50.1
A VID set for a port.
Indexes
BRIDGE-MIBdot1dBasePort vlanSubnetPortGroupId
Column Syntax OID
vlanSubnetPortGroupId
Designates a group of subnets in the
Group Database.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.6.1.101.48.50.1.1
vlanSubnetPortGroupVid
The VID associated with a group of subnets for
each port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.9.6.1.101.48.50.1.2
vlanSubnetPortRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.50.1.3

vlanTriplePlayTable

table
.1.3.6.1.4.1.9.6.1.101.48.51 · 1 row entry · 3 columns
Open in standard view 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanTriplePlayEntry entry .1.3.6.1.4.1.9.6.1.101.48.51.1
entry of TriplePlay table
Indexes
vlanTriplePlayInnerVID
Column Syntax OID
vlanTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.51.1.1
vlanTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.51.1.2
vlanTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.51.1.3

vlanTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.9.6.1.101.48.52 · 1 row entry · 2 columns
Open in standard view 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanTriplePlayMulticatTvEntry entry .1.3.6.1.4.1.9.6.1.101.48.52.1
entry of triple play MulticastTv table
Indexes
vlanTriplePlayMulticastTvMulticastTvVID
Column Syntax OID
vlanTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.52.1.1
vlanTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.52.1.2

vlanVoiceTable

table
.1.3.6.1.4.1.9.6.1.101.48.54.2 · 1 row entry · 3 columns
Open in standard view 
A table containing static configuration information for
each voice VLAN configured into the device and dynamic port membership.
All entries are permanent and will
be restored after the device is reset.
vlanVoiceEntry entry .1.3.6.1.4.1.9.6.1.101.48.54.2.1
Information for a voice VLAN configured into the device by management.
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
vlanVoicePriority
An administratively assigned Priority, which will be used
for all traffic on the voice vlan, this gives the packets
the requested priority (CoS) within the bridge.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.6.1.101.48.54.2.1.1
vlanVoicePriorityRemark
Remark VPT on tagged frames egress the voice vlan according.
to priority true.false
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.54.2.1.2
vlanVoiceRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.54.2.1.3

vlanVoiceOUITable

table
.1.3.6.1.4.1.9.6.1.101.48.54.3 · 1 row entry · 3 columns
Open in standard view 
A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset.
vlanVoiceOUIEntry entry .1.3.6.1.4.1.9.6.1.101.48.54.3.1
Information for a voice VLANs OUI MAC Prefixes configured into the
device by management.
Indexes
vlanVoiceOUIPrefix
Column Syntax OID
vlanVoiceOUIPrefix
The index value used to identify the OUI MAC Prefix component
associated with this entry.

The value of this object is used as an index to the
vlanVoiceOUITable.

Voice VLANs OUI Prefix is th…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.9.6.1.101.48.54.3.1.1
vlanVoiceOUIDescription
An optional text that describes the OUI.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.6.1.101.48.54.3.1.2
vlanVoiceOUIEntryRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.54.3.1.3

vlanVoicePortTable

table
.1.3.6.1.4.1.9.6.1.101.48.54.4 · 1 row entry · 5 columns
Open in standard view 
A table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset.
vlanVoicePortEntry entry .1.3.6.1.4.1.9.6.1.101.48.54.4.1
Static and dynamic per port information for a voice VLAN.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanVoicePortEnable
Enable this port to be a candidate to be added into the Voice VLAN.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.54.4.1.1
vlanVoicePortVlanIndex
The Voice VLAN-ID the port is a candidate to be in.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.54.4.1.2
vlanVoicePortSecure
Specify this port to be in Secure Mode when entering the Voice VLAN.
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
are accepted, otherwise dropped.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.54.4.1.3
vlanVoicePortCurrentMembership
Port's current status of membership in Voice VLAN.

Port's possible values of membership in Voice VLAN:
'Active(1)' - Port is currently added to a Voice VLAN .
'NotActive(2)' - Specifies either that p…
Enumeration
Enumerated Values:
1active
2notActive
 .1.3.6.1.4.1.9.6.1.101.48.54.4.1.4
vlanVoicePortQosMode
Port's current QOS mode in Voice VLAN.
Possible values:
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
'all(2)' - All traffic through that port received QOS of the Voice Vlan.
Enumerationr/w
Enumerated Values:
1src
2all
 .1.3.6.1.4.1.9.6.1.101.48.54.4.1.5

vlanInetTriplePlayTable

table
.1.3.6.1.4.1.9.6.1.101.48.56 · 1 row entry · 4 columns
Open in standard view 
TriplePlay table, map CPE vlan to multicastTvVlan
vlanInetTriplePlayEntry entry .1.3.6.1.4.1.9.6.1.101.48.56.1
entry of TriplePlay table
Indexes
vlanInetTriplePlayInetAddressType vlanTriplePlayInnerVID
Column Syntax OID
vlanInetTriplePlayInetAddressType
Inet type IPv4/IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.6.1.101.48.56.1.1
vlanInetTriplePlayInnerVID
Specifies the CPE inner vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.56.1.2
vlanInetTriplePlayMulticastTvVID
Specifies the multicast TV outer vlan.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.56.1.3
vlanInetTriplePlayRowStatus
The row status variable, used according to
row creation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.56.1.4

vlanInetTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.9.6.1.101.48.57 · 1 row entry · 2 columns
Open in standard view 
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
vlanInetTriplePlayMulticatTvEntry entry .1.3.6.1.4.1.9.6.1.101.48.57.1
entry of triple play MulticastTv table
Indexes
vlanTriplePlayMulticastTvMulticastTvVID
Column Syntax OID
vlanInetTriplePlayMulticastTvMulticastTvVID
Specifies the multicast TV external vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.57.1.1
vlanInetTriplePlayMulticastTvMulticastTvPortList
the multicast tv port list.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.57.1.2

vlanPrivateTable

table
.1.3.6.1.4.1.9.6.1.101.48.59 · 1 row entry · 4 columns
Open in standard view 
Private vlan table which contains the private vlan entries.
vlanPrivateEntry entry .1.3.6.1.4.1.9.6.1.101.48.59.1
Private vlan entry which contains the private vlan definition.
Indexes
vlanPrivateVid
Column Syntax OID
vlanPrivateVid
The static vlan ID which is set to one of the
private vlan types.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.59.1.1
vlanPrivateType
private vlan types:
primary - Carries traffic from promiscuous ports.
promiscuous port can communicate with all ports of the
same PVLAN, including the isolated and community
por…
Enumerationr/w
Enumerated Values:
1primary
2isolated
3community
 .1.3.6.1.4.1.9.6.1.101.48.59.1.2
vlanPrivatePrimaryVid
The primary vlan ID which has defined in VlanPrivateEntry and which is
associated with secondary vlan (in vlanPrivateMapTable).
vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is
primary vlan.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.59.1.3
vlanPrivateStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.59.1.4

vlanPrivateMapTable

table
.1.3.6.1.4.1.9.6.1.101.48.60 · 1 row entry · 7 columns
Open in standard view 
Private vlan mapping table which contains the private vlan mapping entries.
vlanPrivateMapEntry entry .1.3.6.1.4.1.9.6.1.101.48.60.1
Private vlan mapping entry which contains the primary / secondary
private vlan association and their ports membership.
Indexes
vlanPrivateMapPrimaryVid vlanPrivateMapSecondaryVid
Column Syntax OID
vlanPrivateMapPrimaryVid
The primary private vlan ID which is associated with the secondary
(isolated or community) vlan (vlanPrivateMapSecondaryVid).
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.60.1.1
vlanPrivateMapSecondaryVid
The secondary private vlan ID which is associated with the primary
vlan (vlanPrivateMapPrimaryVid).
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.60.1.2
vlanPrivateMapPrimaryPorts
The private vlan promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.60.1.3
vlanPrivateMapSecondaryPorts
The private vlan host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.60.1.4
vlanPrivateMapPrimaryOperPorts
The private vlan active promiscuous ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.60.1.5
vlanPrivateMapSecondaryOperPorts
The private vlan active host ports mode which are belongs to the
association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.60.1.6
vlanPrivateMapStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.60.1.7

vlanTrunkPortModeTable

table
.1.3.6.1.4.1.9.6.1.101.48.61 · 1 row entry · 5 columns
Open in standard view 
The tables contains trunk mode port entries.
vlanTrunkPortModeEntry entry .1.3.6.1.4.1.9.6.1.101.48.61.1
The entry contains port ifIndex,native vlan id and vlan list the port has a membership.
The vlan list can contain not created vlans.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanTrunkPortModeNativeVlanId
Indicated native vlan index.Default value 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.61.1.1
vlanTrunkModeList1to1024
vlan trunk mode list 1. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.61.1.2
vlanTrunkModeList1025to2048
vlan trunk mode list 2. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.61.1.3
vlanTrunkModeList2049to3072
vlan trunk mode list 3. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.61.1.4
vlanTrunkModeList3073to4094
vlan trunk mode list 4. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.61.1.5

vlanAccessPortModeTable

table
.1.3.6.1.4.1.9.6.1.101.48.62 · 1 row entry · 2 columns
Open in standard view 
The tables contains access mode port entries.
vlanAccessPortModeEntry entry .1.3.6.1.4.1.9.6.1.101.48.62.1
The entry contains port ifIndex,access vlan id and multicast TV vlan id.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanAccessPortModeVlanId
Indicated access vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.62.1.1
vlanAccessPortModeMcstTvVlanId
Indicated multicast TV vlan id.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.62.1.2

vlanCustomerPortModeTable

table
.1.3.6.1.4.1.9.6.1.101.48.63 · 1 row entry · 5 columns
Open in standard view 
The tables contains customer mode port entries.
vlanCustomerPortModeEntry entry .1.3.6.1.4.1.9.6.1.101.48.63.1
The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanCustomerPortModeVlanId
Indicated customer vlan id.Default value is 0
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.63.1.1
vlanCustomerPortModeMtvList1to1024
vlan customer port mode multicast TV list 1. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.63.1.2
vlanCustomerPortModeMtvList1025to2048
vlan customer port mode multicast TV list 2. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.63.1.3
vlanCustomerPortModeMtvList2049to3072
vlan customer port mode multicast TV list 3. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.63.1.4
vlanCustomerPortModeMtvList3073to4094
vlan customer port mode multicast TV list 4. Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.63.1.5

vlanSwitchPortModeTable

table
.1.3.6.1.4.1.9.6.1.101.48.64 · 1 row entry · 1 columns
Open in standard view 
The table defines L3/L2 port context.
vlanSwitchPortModeEntry entry .1.3.6.1.4.1.9.6.1.101.48.64.1
The entry contains port ifIndex and switch port enable value.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanSwitchPortModeCategory
Indicated if a port is switchport (l2 port) or no switchport (l3 port)
1 - switchport
2 - no switchport. Default is 1
Enumerationr/w
Enumerated Values:
1l2
2l3
 .1.3.6.1.4.1.9.6.1.101.48.64.1.1

vlanPortModeContextTable

table
.1.3.6.1.4.1.9.6.1.101.48.65 · 1 row entry · 1 columns
Open in standard view 
The tables contains current port mode context entries.
vlanPortModeContextEntry entry .1.3.6.1.4.1.9.6.1.101.48.65.1
The entry contains current port mode context.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanPortModeContextValue
Indicated port context value:
0. Lag
1. Monitor
2. L3
3. RAVA
4. Dot1x
5. Dot1q
6. Access
7. Trunk
8. Customer
9. PV_promisc
10. PV_host
11. VM_tunnel
12. VM_one_to_one
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.65.1.1

vlanRsvlMapTable

table
.1.3.6.1.4.1.9.6.1.101.48.67 · 1 row entry · 3 columns
Open in standard view 
Shared vlan learning mapping table which contains the SVL mapping entries.
vlanRsvlMapEntry entry .1.3.6.1.4.1.9.6.1.101.48.67.1
SVL mapping entry which contains the primary / secondary
SVL association.
Indexes
vlanRsvlMapPrimaryVid vlanRsvlMapSecondaryVid
Column Syntax OID
vlanRsvlMapPrimaryVid
The primary SVL ID which is associated with the secondary
shared vlan vlanRsvlMapSecondaryVid.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.67.1.1
vlanRsvlMapSecondaryVid
The secondary SVL ID which is associated with the primary
shared vlan vlanRsvlMapPrimaryVid.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.67.1.2
vlanRsvlMapStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.67.1.3

rldot1qPortVlanStaticTable

table
.1.3.6.1.4.1.9.6.1.101.48.68 · 1 row entry · 12 columns
Open in standard view 
A table containing static vlan port membership information.
rldot1qPortVlanStaticEntry entry .1.3.6.1.4.1.9.6.1.101.48.68.1
Static vlan membership information per port
Indexes
IF-MIBifIndex
Column Syntax OID
rldot1qPortVlanStaticEgressList1to1024
The port egress vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.1
rldot1qPortVlanStaticEgressList1025to2048
The port egress vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.2
rldot1qPortVlanStaticEgressList2049to3072
The port egress vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.3
rldot1qPortVlanStaticEgressList3073to4094
The port egress vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.4
rldot1qPortVlanStaticUntaggedEgressList1to1024
The port egress untagged vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.5
rldot1qPortVlanStaticUntaggedEgressList1025to2048
The port egress untagged vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.6
rldot1qPortVlanStaticUntaggedEgressList2049to3072
The port egress untagged vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.7
rldot1qPortVlanStaticUntaggedEgressList3073to4094
The port egress untagged vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.8
rldot1qPortVlanStaticForbiddenList1to1024
The port forbidden vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.9
rldot1qPortVlanStaticForbiddenList1025to2048
The port forbidden vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.10
rldot1qPortVlanStaticForbiddenList2049to3072
The port forbidden vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.11
rldot1qPortVlanStaticForbiddenList3073to4094
The port forbidden vlan static list.Default value is {0}
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.68.1.12

rldot1qVlanStaticListTable

table
.1.3.6.1.4.1.9.6.1.101.48.69 · 1 row entry · 5 columns
Open in standard view 
A table contains only one entry of a static vlan list.
rldot1qVlanStaticListEntry entry .1.3.6.1.4.1.9.6.1.101.48.69.1
Staticly created by local or network management vlan list
Indexes
rldot1qVlanStaticListIndex
Column Syntax OID
rldot1qVlanStaticListIndex
An index is entrie's sequence.
This field substitutes a vlan type.
If the vlan was created by user configuration then
the type is static.
If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp.
If t…
Enumerationr/w
Enumerated Values:
0static
1dynamicGvrp
2dynamicRava
3current
 .1.3.6.1.4.1.9.6.1.101.48.69.1.1
rldot1qVlanStaticList1to1024
A list of staticaly created vlans from 1 to 1024.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.69.1.2
rldot1qVlanStaticList1025to2048
A list of according to the type field created vlans from 1025 to 2048.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.69.1.3
rldot1qVlanStaticList2049to3072
A list of according to the type field created vlans from 2049 to 3072.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.69.1.4
rldot1qVlanStaticList3073to4094
A list of according to the type field created vlans from 3073 to 4094.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.69.1.5

rldot1qVlanStaticNameTable

table
.1.3.6.1.4.1.9.6.1.101.48.70 · 1 row entry · 1 columns
Open in standard view 
A table contains created by user vlans names.
rldot1qVlanStaticNameEntry entry .1.3.6.1.4.1.9.6.1.101.48.70.1
Staticly created by local or network management vlan list
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
rldot1qVlanStaticName
An administratively assigned string,which may be used
to identify the VLAN. The VLAN name must be unique or no name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.6.1.101.48.70.1.1

rlPortVlanTriplePlayMulticastTvTable

table
.1.3.6.1.4.1.9.6.1.101.48.71 · 1 row entry · 4 columns
Open in standard view 
A table saves a list of vlans per port/lag.
rlPortVlanTriplePlayMulticastTvEntry entry .1.3.6.1.4.1.9.6.1.101.48.71.1
Entry of Triple Play Multicast Tv table.
Indexes
IF-MIBifIndex
Column Syntax OID
rlPortVlanTriplePlayMulticastTvList1to1024
A list of staticaly created Triple Play MTV vlans from 1 to 1024.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.71.1.1
rlPortVlanTriplePlayMulticastTvList1025to2048
A list of staticaly created Triple Play MTV vlans from 1025 to 2048.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.71.1.2
rlPortVlanTriplePlayMulticastTvList2049to3072
A list of staticaly created Triple Play MTV vlans from 2049 to 3072.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.71.1.3
rlPortVlanTriplePlayMulticastTvList3073to4094
A list of staticaly created Triple Play MTV vlans from 3073 to 4094.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4r/w
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.48.71.1.4

rldot1qVlanMembershipTypeTable

table
.1.3.6.1.4.1.9.6.1.101.48.72 · 1 row entry · 1 columns
Open in standard view 
A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN.
rldot1qVlanMembershipTypeEntry entry .1.3.6.1.4.1.9.6.1.101.48.72.1
Staticly or dynamicly created VLAN ID owner entry
Indexes
Q-BRIDGE-MIBdot1qVlanIndex
Column Syntax OID
rldot1qVlanMembershipTypeBitmap
This field contains a bitmap of owners that can creates and/or add a port
to the VLAN.
There exist three such type of owners :
Default VLAN
Manual created VLAN
Dynamic(RAVA)created VLAN
GVRP(MVRP)created VLAN
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.72.1.1

vlanMappingTunnelEdgePortConfigTable

table
.1.3.6.1.4.1.9.6.1.101.48.75 · 1 row entry · 8 columns
Open in standard view 
The tables contains vlan mapping tunnel mode port configuration entries.
vlanMappingTunnelEdgePortConfigEntry entry .1.3.6.1.4.1.9.6.1.101.48.75.1
The entry contains port ifIndex, ethernet type value and L2protocol behavior for Edge port.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanMappingTunnelEdgePortConfigVlanId
Specifies S-VLAN-ID used to encapsulate of forwarded untagged Layer 2 frames.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.75.1.1
vlanMappingTunnelEdgePortConfigCos
Specify class of service (CoS) value into S-VLAN tag of forwarded Layer 2 frames.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.6.1.101.48.75.1.2
vlanMappingTunnelEdgePortConfigDropThreshold
Set a drop threshold for received forwarded L2 protocol frames in kbps resolution.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.9.6.1.101.48.75.1.3
vlanMappingTunnelEdgePortConfigShutdownThreshold
Set a shutdown threshold for received forwarded L2 protocol frames in packets-per-second resolution.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.9.6.1.101.48.75.1.4
vlanMappingTunnelEdgePortConfigForwardCDP
Configure CDP forward over the Provider network untagged Layer 2 frames received.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.75.1.5
vlanMappingTunnelEdgePortConfigForwardLLDP
Configure LLDP forward over the Provider network untagged Layer 2 frames received.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.75.1.6
vlanMappingTunnelEdgePortConfigForwardSTP
Configure STP forward over the Provider network untagged Layer 2 frames received.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.75.1.7
vlanMappingTunnelEdgePortConfigForwardVTP
Configure VTP forward over the Provider network untagged Layer 2 frames received.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.75.1.8

vlanMappingTunnelNniPortConfigTable

table
.1.3.6.1.4.1.9.6.1.101.48.76 · 1 row entry · 2 columns
Open in standard view 
The table contains vlan mapping tunnel mode port configuration entries.
vlanMappingTunnelNniPortConfigEntry entry .1.3.6.1.4.1.9.6.1.101.48.76.1
The entry contains port ifIndex, ethernet type value for NNI port.
Indexes
IF-MIBifIndex
Column Syntax OID
vlanMappingTunnelNniPortConfigEthTypeValue
Indicated ethernet type. Default is 0x8100.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.48.76.1.1
vlanMappingTunnelNniPortConfigRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.76.1.2

vlanMappingTunnelEdgePortTable

table
.1.3.6.1.4.1.9.6.1.101.48.77 · 1 row entry · 7 columns
Open in standard view 
The tables contains vlan mapping tunnel mode port.
vlanMappingTunnelEdgePortEntry entry .1.3.6.1.4.1.9.6.1.101.48.77.1
The entry contains VLAN mapping configuration for edge port, C-VLAN and S-VLAN.
Indexes
IF-MIBifIndex vlanMappingTunnelEdgePortCVlanTag
Column Syntax OID
vlanMappingTunnelEdgePortCVlanTag
C-VLAN value to be encapsulated.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.77.1.1
vlanMappingTunnelEdgePortSVlanTag
S-VLAN value.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.77.1.2
vlanMappingTunnelEdgePortDefaultConfig
VLAN mapping default VLAN configuration exists.
VlanMappingDefaultConfigModer/w
Textual Convention: VlanMappingDefaultConfigMode Enumeration
Type Values:
1set
2unset
 .1.3.6.1.4.1.9.6.1.101.48.77.1.3
vlanMappingTunnelEdgePortActionConfig
VLAN mapping action defined.
VlanMappingActionConfigModer/w
Textual Convention: VlanMappingActionConfigMode Enumeration
Type Values:
1forward
2drop
 .1.3.6.1.4.1.9.6.1.101.48.77.1.4
vlanMappingTunnelEdgePortIsActiveEdge
VLAN mapping port type - edge or NNI.
VlanMappingTunnelPortTyper/w
Textual Convention: VlanMappingTunnelPortType Enumeration
Type Values:
1edge
2nni
 .1.3.6.1.4.1.9.6.1.101.48.77.1.5
vlanMappingTunnelEdgePortMapMode
VLAN mapping port mode - QinQ or selective QinQ.
VlanMappingTunnelPortModer/w
Textual Convention: VlanMappingTunnelPortMode Enumeration
Type Values:
1qinq
2selqinq
 .1.3.6.1.4.1.9.6.1.101.48.77.1.6
vlanMappingTunnelEdgePortRowStatus
he row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.77.1.7

vlanMappingOneToOneEdgePortTable

table
.1.3.6.1.4.1.9.6.1.101.48.78 · 1 row entry · 4 columns
Open in standard view 
The tables contains vlan mapping tunnel mode port.
vlanMappingOneToOneEdgePortEntry entry .1.3.6.1.4.1.9.6.1.101.48.78.1
The entry contains VLAN mapping configuration for Nni port, C-VLAN and S-VLAN.
Indexes
IF-MIBifIndex vlanMappingOneToOneEdgePortCVlanTag
Column Syntax OID
vlanMappingOneToOneEdgePortCVlanTag
C-VLAN value to be encapsulated.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.78.1.1
vlanMappingOneToOneEdgePortSVlanTag
S-VLAN value.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.6.1.101.48.78.1.2
vlanMappingOneToOneEdgePortIsActiveEdge
VLAN mapping port type - edge or NNI.
VlanMappingTunnelPortTyper/w
Textual Convention: VlanMappingTunnelPortType Enumeration
Type Values:
1edge
2nni
 .1.3.6.1.4.1.9.6.1.101.48.78.1.3
vlanMappingOneToOneEdgePortRowStatus
he row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.78.1.4

vlanAutoSurveillanceTrafficSourceTable

table
.1.3.6.1.4.1.9.6.1.101.48.83 · 1 row entry · 6 columns
Open in standard view 
A table containing static global configuration information for Auto Surveillance VLAN OUI
prefixes/MAC addresses
vlanAutoSurveillanceTrafficSourceEntry entry .1.3.6.1.4.1.9.6.1.101.48.83.1
Information for Auto Surveillance VLAN OUI Prefixes/MAC addresses
configured into the device by management.
Indexes
vlanAutoSurveillanceTrafficSourceAddress vlanAutoSurveillanceTrafficSourceIsOUI
Column Syntax OID
vlanAutoSurveillanceTrafficSourceAddress
The MAC address/OUI prefix that identifies traffic as surveillance traffic.
In case of OUI, the 3 least significant octets of the MAC address return as 0.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.6.1.101.48.83.1.1
vlanAutoSurveillanceTrafficSourceIsOUI
The field indicates if field vlanAutoSurveillanceTrafficSourceAddress
configured as OUI prefix or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.83.1.2
vlanAutoSurveillanceTrafficSourceDescription
An optional text that describes the MAC address/OUI prefix.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.6.1.101.48.83.1.3
vlanAutoSurveillanceTrafficSourceIsActive
The field indicates if vlanAutoSurveillanceTrafficSourceAddress
traffic is active for some interface in the system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.83.1.4
vlanAutoSurveillanceTrafficSourceInterfaces
The field includes all interfaces that are active for the current
vlanAutoSurveillanceTrafficSourceAddress.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.48.83.1.5
vlanAutoSurveillanceTrafficSourceRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.48.83.1.6

vlanAutoSurveillanceInterfaceTable

table
.1.3.6.1.4.1.9.6.1.101.48.84 · 1 row entry · 2 columns
Open in standard view 
A table containing information for Auto Surveillance VLAN Interfaces.
vlanAutoSurveillanceInterfaceEntry entry .1.3.6.1.4.1.9.6.1.101.48.84.1
Information for Auto Surveillance VLAN Interface (port or trunk).
Indexes
IF-MIBifIndex
Column Syntax OID
vlanAutoSurveillanceInterfaceEnable
Enable this interface to be a candidate to be added into the Auto Surveillance VLAN.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.84.1.1
vlanAutoSurveillanceInterfaceIsActive
The field indicates interface current status of membership in the Auto Surveillance VLAN.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.48.84.1.2