CISCOSB-IETF-SYSLOG-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
13
.1.3.6.1.4.1.9.6.1.101.82.1.2.4 · 1 row entry · 9 columns
A table containing Syslog collector information.
snmpSyslogCollectorEntry entry .1.3.6.1.4.1.9.6.1.101.82.1.2.4.1
Defines the information to generate syslog messages to
an aggregating agent or collector.

Entries within this table with an access level of read-
create MUST be considered non-volatile and MUST be
maintaine…
Indexes
snmpSyslogCollectorIndex
Column Syntax OID
snmpSyslogCollectorIndex
A unique arbitrary identifier for this syslog collector.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.1
snmpSyslogCollectorDescription
Administratively assigned textual description of this
syslog collector.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.2
snmpSyslogCollectorAddressType
The type of Internet address by which the Syslog
collector is specified in snmpSyslogCollectorAddress.

Not all address types may be supported.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.3
snmpSyslogCollectorAddress
The Internet address for the Syslog message collector.

The use of DNS domain names is discouraged, and agent
support for them is optional. Deciding when, and how
often, to resolve them is an issue. Not …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.4
snmpSyslogCollectorUdpPort
The UDP port number the syslog device is using to send
requests to this syslog collector.
If an entity only supports sending messages using a
single UDP port to all collectors then this may optionally
be implemented rea…
SyslogUdpPortr/w
Textual Convention: SyslogUdpPort Unsigned32
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.5
snmpSyslogCollectorFacility
The syslog facility (local0-local7) that will be encoded
in messages sent to this collector.

If an entity only supports encoding a single facility in
all messages to all collectors then this may optionall…
SyslogFacilityr/w
Textual Convention: SyslogFacility Enumeration
Type Values:
16local0
17local1
18local2
19local3
20local4
21local5
22local6
23local7
24no-map
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.6
snmpSyslogCollectorSeverity
The maximum severity level of the messages that SHOULD
be forwarded to the syslog collector. The higher the level,
the lower the severity.

If an entity only supports filtering based on a single
severity …
SyslogSeverityr/w
Textual Convention: SyslogSeverity Enumeration
Type Values:
0emergency
1alert
2critical
3error
4warning
5notice
6info
7debug
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.7
snmpSyslogCollectorMessagesIgnored
This is a count of messages not sent to this collector
because the severity level of the message was above
snmpSyslogCollectorSeverity, the higher the level,
the lower the severity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.8
snmpSyslogCollectorRowStatus
This object allows for the dynamic creation and deletion
of entries within the snmpSyslogCollectorTable as well as
the activation and deactivation of these entries.

When this object's value is set to notI…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.6.1.101.82.1.2.4.1.9
.1.3.6.1.4.1.9.6.1.101.82.1.3.1 · 1 row entry · 4 columns
This is a table of applications on the managed entity
that provide individual control over the severity level
of the messages that they will generate.
snmpSyslogApplicationEntry entry .1.3.6.1.4.1.9.6.1.101.82.1.3.1.1
An individual application that provides that ability
to control the messages that it generates based on a
severity level.

MUST be considered non-volatile and MUST be maintained
across entity resets.
Indexes
snmpSyslogApplicationIndex
Column Syntax OID
snmpSyslogApplicationIndex
A unique arbitrary identifier for this application.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.1
snmpSyslogApplicationDescription
Textual description of this application, assigned by
the managed entity.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.2
snmpSyslogApplicationMnemonic
An abbreviation of the textual description for this
application, assigned by the managed entity.

i.e. 'STP' for 'Spanning Tree Protocol', etc.

This provides a mapping between the textual de…
OctetString
Constraints:
range: 1-8
.1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.3
snmpSyslogApplicationSeverity
The maximum severity level of the messages from this
application that SHOULD be forwarded to the syslog
device software for processing.

The higher the severity level, the more verbose the
messages.
SyslogSeverityr/w
Textual Convention: SyslogSeverity Enumeration
Type Values:
0emergency
1alert
2critical
3error
4warning
5notice
6info
7debug
.1.3.6.1.4.1.9.6.1.101.82.1.3.1.1.4