CISCO-WWNMGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
3
.1.3.6.1.4.1.9.9.286.1.1.9 · 1 row entry · 3 columns
This table provides an option to configure
user specified WWN for the VSANs. 
          
To enable the fibre channel switch to interoperate
with other vendor switches on a VSAN, user 
needs to configure a WWN (based on the other 
vendor switch OUI) for the corresponding VSAN. 
          
To create a new entry in this table for a VSAN,
a corresponding entry for that VSAN should exists in
the vsanTable. Also, the value of the corresponding 
instance of vsanAdminState should be in 'suspended' 
state and the VSAN should interoperate in mode 4 
(represented by vsanInterOperValue '4'). 
          
An entry from this table can be removed by any one
of the following ways, 
a. Setting the corresponding instance 
   wwnmVsanWwnRowStatus value to 'destroy'. 
b. Deleting the corresponding VSAN from vsanTable.
c. Changing the corresponding VSAN configuration 
   from interoperate mode 4 (represented by 
   vsanInterOperValue '4') to any other value.
wwnmVsanWwnEntry entry .1.3.6.1.4.1.9.9.286.1.1.9.1
An entry (conceptual row) in this table.
Each entry of this table represents the
WWN configuration set for a VSAN.
Indexes
Column Syntax OID
wwnmVsanWwn
The user configurable WWN for a VSAN.

For row creation, it is mandatory to set
the value of this object to a valid value.
CISCO-ST-TCFcNameIdr/w
Textual Convention: CISCO-ST-TCFcNameId OctetString
Type Constraints:
range: 8
.1.3.6.1.4.1.9.9.286.1.1.9.1.1
wwnmVsanWwnStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need
not allow write-access to any columnar objects in
the row.
SNMPv2-TCStorageType
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.4.1.9.9.286.1.1.9.1.2
wwnmVsanWwnRowStatus
The status of this conceptual row.

The value of this object cannot be 'active'
unless the value of the corresponding instance
of 'wwnmVsanWwn' is set to a valid value.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.286.1.1.9.1.3