CISCO-WAN-RSRC-PART-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
35

cwRsrcPartConfTable

table
.1.3.6.1.4.1.9.9.125.1.1.1 · 1 row entry · 19 columns
Open in standard view 
This table is for configuring resource partition parameters.
A resource partition is configured on an interface whose
ifType is atmVirtual(149) or atm(37). An entry can be added,
deleted or modified. Entries in this table can be modified
through the commands provided by the CLI also.
cwRsrcPartConfEntry entry .1.3.6.1.4.1.9.9.125.1.1.1.1
An entry for a resource partition. A resource partition
has to be created before connections can be added to the
interface.
In the following objects, ingress direction means, from network
to switch, and egress direc…
Indexes
IF-MIBifIndex cwRsrcPartID
Column Syntax OID
cwRsrcPartID
This is resource partition identifier. One interface can
have multiple resource partitions on it.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.125.1.1.1.1.1
cwRsrcPartController
This is controller identifier. Once a resource partition
is added the controller identified by this identifier
can access resources configured for this partition.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.125.1.1.1.1.2
cwRsrcPartEgrGuarPctBwConf
The guaranteed percentage bandwidth reserved for the
resource partition in egress direction.
The sum of all resource partition guaranteed
bandwidths cannot exceed 100% of interface's guaranteed
bandwidth.
0.0001 percentageUnsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.3
cwRsrcPartEgrMaxPctBwConf
The maximum percentage bandwidth for the resource partition
in egress direction. This is not the guaranteed bandwidth.
If bandwidth is available, the resource partition will be
allocated bandwidth up to this value.
0.0001 percentageUnsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.4
cwRsrcPartIngGuarPctBwConf
The guaranteed percentage bandwidth reserved for the
resource partition in ingress direction.
The sum of all resource partition guaranteed
bandwidths cannot exceed 100% of the interface's guaranteed
bandwidth.
0.0001 percentageUnsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.5
cwRsrcPartIngMaxPctBwConf
The maximum percentage bandwidth allocated for the resource
partition in ingress direction.
This is not the guaranteed bandwidth. If bandwidth
is available, the resource partition will be allocated
bandwidth up to th…
0.0001 percentageUnsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.6
cwRsrcPartEgrPctBwUsed
This is the percentage bandwidth used by the resource
partition in egress direction.
0.0001 percentageUnsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.7
cwRsrcPartIngPctBwUsed
This is the percentage bandwidth used by the resource
partition in ingress direction.
0.0001 percentageUnsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.8
cwRsrcPartEgrPctBwAvail
This is the percentage bandwidth available on the resource
partition in egress direction.
0.0001 percentageUnsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.9
cwRsrcPartIngPctBwAvail
This is the percentage bandwidth available on the resource
partition in ingress direction.
0.0001 percentageUnsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.9.9.125.1.1.1.1.10
cwRsrcPartVpiLo
The beginning of the VPI range for this partition. Connections
provisioned on this partition must have a VPI greater than or
equal to this value.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.125.1.1.1.1.11
cwRsrcPartVpiHigh
The end of the VPI range for this partition. Connections
provisioned on this partition must have a VPI less than or
equal to this value.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.125.1.1.1.1.12
cwRsrcPartVciLo
The beginning of the VCI range for this partition. Connections
provisioned on this partition must have VCI greater than or
equal to this VCI.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.125.1.1.1.1.13
cwRsrcPartVciHigh
The end of the VCI range reserved for this partition.
Connections provisioned on this partition must have a VCI
less than or equal to this VCI.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.125.1.1.1.1.14
cwRsrcPartGuarCon
The guaranteed number of connections that can be
configured on this partition.
Unsigned32r/w
Constraints:
range: 0-131072
 .1.3.6.1.4.1.9.9.125.1.1.1.1.15
cwRsrcPartMaxCon
The maximum number of connections that can be configured on
this partition.
Unsigned32r/w
Constraints:
range: 0-131072
 .1.3.6.1.4.1.9.9.125.1.1.1.1.16
cwRsrcPartUsedCon
This is the number of connections currently in use on this
partition.
Unsigned32
Constraints:
range: 0-131072
 .1.3.6.1.4.1.9.9.125.1.1.1.1.17
cwRsrcPartAvailCon
This is the number of connections available, that can be
added on this partition.
Unsigned32
Constraints:
range: 0-131072
 .1.3.6.1.4.1.9.9.125.1.1.1.1.18
cwRsrcPartRowStatus
This will add, delete or modify the partition. Resource
partition can be created by setting this object to
createAndGo(4). Row may be deleted by setting this object
to destroy(6).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.125.1.1.1.1.19

cwRsrcPartIlmiTable

table
.1.3.6.1.4.1.9.9.125.1.1.2 · 1 row entry · 7 columns
Open in standard view 
This is the ILMI configuration table. If the interface supports
ILMI, the agent will automatically create a row in this table
when a row is created in cwRsrcPartConfTable. The ILMI objects
will be set with default values, i.e, with ILMI signalling
disabled.
cwRsrcPartIlmiEntry entry .1.3.6.1.4.1.9.9.125.1.1.2.1
If the interface supports ILMI, the agent will automatically
create an entry in this table when a resource partition is
created. By default, ILMI is disabled on resource partitions.
ILMI can be enabled by setting 'cwR…
Indexes
IF-MIBifIndex cwRsrcPartID
Column Syntax OID
cwRsrcPartIlmiEnabled
By setting the value of this object to 'true', ILMI signalling
is enabled on the resource partition.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.125.1.1.2.1.1
cwRsrcPartSignallingVpi
Indicates the VPI on which signalling cells arrive on this
resource partition.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.125.1.1.2.1.2
cwRsrcPartSignallingVci
Indicates the VCI on which signalling cells arrive on this
resource partition.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.125.1.1.2.1.3
cwRsrcPartIlmiTrapEnable
ILMI trap generation can be enabled or disabled using
this object.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.125.1.1.2.1.4
cwRsrcPartIlmiEstablishConPollIntvl
The amount of time S between successive transmissions
of ILMI messages on this interface for the purpose of
detecting establishment of ILMI connectivity.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.125.1.1.2.1.5
cwRsrcPartIlmiCheckConPollIntvl
The amount of time T between successive transmissions
of ILMI messages on this interface for the purpose of
detecting loss of ILMI connectivity. The distinguished
value zero disables ILMI connectivity procedures on
thi…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.125.1.1.2.1.6
cwRsrcPartIlmiConPollInactFactor
The number K of consecutive polls on this interface
for which no ILMI response message is received before
ILMI connectivity is declared lost.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.125.1.1.2.1.7

cwRsrcPartCtlrConfTable

table
.1.3.6.1.4.1.9.9.125.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table is for configuring additional controllers to
manage a resource partition.
cwRsrcPartCtlrConfEntry entry .1.3.6.1.4.1.9.9.125.1.1.3.1
An entry for additional controllers to control an existing
resource partition. The resource partition, identified by
indices ifIndex and cwRsrcPartID, must exist in the
cwRsrcPartConfTable. An entry from this table is …
Indexes
IF-MIBifIndex cwRsrcPartID cwRsrcPartCtlrController
Column Syntax OID
cwRsrcPartCtlrController
This is controller identifier. One resource partition can be
controlled by multiple controllers.User may want to do this to
configure redundant controllers.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.125.1.1.3.1.1
cwRsrcPartCtlrRowStatus
This is used to create a row in the cwRsrcPartCtlrConfTable.
A redundant controller is added by setting this object to
createAndGo(4).
Row may be deleted by setting this object to destroy(6).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.125.1.1.3.1.2

cwRsrcSvcAggregateTable

table
.1.3.6.1.4.1.9.9.125.1.2.1 · 1 row entry · 7 columns
Open in standard view 
This table is for configuring an SVC aggregate resource within 
a resource partition. This provides aggregate bandwidth and 
VPI range within a resource partition that CAC (Call Admission
Control) can dynamically allocate the required resource from 
it to establish a SVC connection for the incoming call. 
          
The allocated bandwidth will become available in the SVC 
aggregate when the call is torn down.  When the required 
bandwidth of an incoming call exceeds the bandwidth available 
for SVC connection, the CAC will fail the establishment of the 
new call.
cwRsrcSvcAggregateEntry entry .1.3.6.1.4.1.9.9.125.1.2.1.1
An entry of SVC Aggregate.
An SVC Aggregate is used to reserve certain bandwidth
in the resource partition to be dedicated for call set-up.
Indexes
IF-MIBifIndex cwRsrcPartID
Column Syntax OID
cwRsrcSvcAggrVpiLow
The low end of the VPI range for this SVC aggregate.
This value has to be greater than or equal to the value of
cwRsrcPartVpiLo of the containing resource partition.
SVC connection provisioned on this SVC aggregate mus…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.125.1.2.1.1.1
cwRsrcSvcAggrVpiHigh
The high end of the VPI range for this SVC aggregate.
This value has to be less than or equal to the value of
cwRsrcPartVpiHigh of the containing resource partition.
SVC connection provisioned on this SVC aggregate must…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.125.1.2.1.1.2
cwRsrcSvcAggrEgrPctBw
This object indicates the percentage egress bandwidth that
is used by SVC connections within the resource partition.

The total egress bandwidth will be used by SVC connections
within the resource parti…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.125.1.2.1.1.3
cwRsrcSvcAggrIngPctBw
This object indicates the percentage ingress bandwidth that
is used by SVC connections within the resource partition.

The total ingress bandwidth will be used by SVC connections
within the resource par…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.125.1.2.1.1.4
cwRsrcSvcAggrChanVADTolerance
The value in this object refers to the customer accepted
drop rate for voice connections when the bandwidth usage
exceeds allowed value.

The actual range of this object is 0.0001(or 0.01%) to
…
0.0001Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.9.9.125.1.2.1.1.5
cwRsrcSvcAggrChanVADDutyCycle
This object refers to the talk-spurts duty cycle.

The actual range of this object is 0.01(or 1%) to
0.99(or 99%).

When the value of this object is to be passed to underlying
CAC module th…
0.01Integer32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.9.9.125.1.2.1.1.6
cwRsrcSvcAggrRowStatus
When an entry of the table is created, the following
objects are mandatory:
cwRsrcSvcAggrVpiLow
cwRsrcSvcAggrVpiHigh
cwRsrcSvcAggrEgrPctBw
cwRsrcSvcAggrIngPctBw
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.125.1.2.1.1.7